SAM9 Search Results

Contextual Info: SAM50F thru SAM90F and SAM50UF thru SAM90UF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: 562 404-7855 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet 0.5 Amp 5000-9000 VOLTS 60-150 nsec

Contextual Info: AT91SAM ARM-based Embedded MPU SAM9X35 SUMMARY DATASHEET Description The SAM9X35 is a highly-integrated 400 MHz ARM926EJ-S embedded MPU, featuring an extensive peripheral set and high bandwidth architecture for industrial applications that require refined user interfaces and high-speed communication.

Contextual Info: ARM-based Embedded MPU SAM9G35 DATASHEET Description The SAM9G35 is a member of the Atmel series of 400 MHz ARM926EJ-S embedded MPUs that support high bandwidth communication and advanced user interfaces and are optimized for industrial applications such as building automation,

Contextual Info: AT91SAM ARM-based Embedded MPU SAM9263 Description The SAM9263 32-bit microcontroller, based on the ARM926EJ-S processor, is architectured on a 9-layer matrix, allowing a maximum internal bandwidth of nine 32-bit buses. It also features two independent external memory buses, EBI0 and EBI1, capable of interfacing with a wide range of memory devices and an IDE hard disk. Two external buses prevent

Contextual Info: ARM-based Embedded MPU SAM9N12 SAM9CN11 SAM9CN12 SUMMARY DATASHEET Description Based on the ARM926EJ-S processor, the Atmel SAM9N12/CN11/CN12 devices offer the frequently-requested combination of user interface functionality and high data rate connectivity, with LCD Controller, resistive touch-screen, multiple UARTs, SPI,

SAM9707

Abstract: DREAM SAM9407 Dream Atmel SAM9707 sam9407
Contextual Info: Æ jjEL SAM9707 dream INTEGRATED SOUND STUDIO PIN TO PIN REPLACEMENT FOR SAM9407 - REQUIRES 3.3V CORE SUPPLY VC3 • Single chip sound studio, typical application includes : — wavetable synthesis, serial MIDI in & out, MPU-401 UART — game compatible synthesis, with Adlib interface

atmel 844

Abstract: dream SAM9773 TDA1311AT la 7632 13X2 1N4148 SAM9773GM k 719 2625A-DRMDS-04
Contextual Info: Features • The 9773GM Board provides: 1 – High Quality Wavetable Synthesis with 38 Voice Polyphony – Compatible Reverb and Chorus – Surround – Four Band Equalizer • Low Cost Wavetable Module Description The SAM9773GM Board demonstrates a typical application of the SAM9773. This is a

61256-20

Abstract: 61256 SAM9703 spatializer schematic reverb effect 13X2 1N4148 PCM1718E Dream c5 rom
Contextual Info: 9703GS Revision : 27 May 1999 SAM9703 EVALUATION BOARD 9703GS is a 4Mbyte sample set SAM9703 based « waveblaster » compatible board. It provides professional quality MIDI synthesis, with reverb, echo, 4 bands parametic equalizer and spatializer effect, with minimum

Creative 4.1 speakers

Abstract: la 7632 SAM9793GM MIDI Dream ad1857 midi schematics atmel 844 13X2 C8C11 MPU-401
Contextual Info: Features • The 9793GM Board provides: 1 – SAM High Quality Wavetable Synthesis with 38 voice polyphony – Compatible Reverb and Chorus – Surround – Four Band Equalizer • Low Cost Wavetable Module Description The SAM9793GM Reference Design Board demonstrates a typical application of the

Contextual Info: SAM9M10 Atmel | SMART ARM-based Embedded MPU DATASHEET Description The Atmel | SMART SAM9M10 is a multimedia-enabled mid-range ARM926based embedded MPU running at 400MHz, combining user interfaces, video playback and connectivity. It includes hardware video decoder, LCD Controller,

AS1301EHT-ADJ

Abstract: AT91SAM9 SDRAM CP2122ST AS1301E dm9161aep board RFU14
Contextual Info: SAM9G15-EK SAM9G25-EK SAM9G35-EK SAM9X25-EK SAM9X35-EK . User Guide 11115A–ATARM–27-Jul-11 1-2 11115A–ATARM–27-Jul-11 Evaluation Kit EK User Guide

SAM9260

Abstract: ARM926EJ-S AT91SAM9260 CR2032 ISO7816 CR2032 3.3V battery nand flash pcb layout "SMD jumper" AT91SAM9260 pwm ST3232 PACKAGE NAME
Contextual Info: SAM9-L9260 development board Users Manual Rev.C, July 2009 Copyright c 2009, OLIMEX Ltd, All rights reserved INTRODUCTION: SAM9-L9260 is a low cost development platform with ARM9 microcontroller, 64MB SDRAM and 512MB NAND Flash. The board has Ethernet 100Mbit controller, USB host, USB device, RS232 and 40 pin

000014E

Abstract: strd 5441 AT91SAM9260 errata c12 prone msr Automotive Security Alarm Receiver MCI 3504 RX GK transistor 2B4 BGA217 SMC10 at91sam9g45 vga AT91SAM bluetooth
Contextual Info: AT91SAM ARM-based Embbedded MPU SAM9260 DATASHEET Features • 180 MHz ARM926EJ-S ARM Thumb® Processor – 8 KBytes Data Cache, 8 KBytes Instruction Cache, MMU • Memories • • • • – 32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories,

800x480 resolution

Abstract: 128x128 LCD AtMEL 624 AT91SAM planar YUV x35 lcd BLENDER
Contextual Info: LCD Implementation on SAM9G15/G35/X35 Devices 1. Scope This application note describes how to use and optimize the full featured LCD embedded in Atmel ARM -based SAM9G15, SAM9G35 and SAM9X35 devices. Please note that an example is provided on Atmel web site, in the Software Package

SAM9X35

Abstract: SDHC schematic SAM9X35-EK PD15-PD31
Contextual Info: SAM9X35 Microcontroller Schematic Check List 1. Introduction This application note is a schematic review check list for systems embedding the Atmel AT91SAM ARM®-based SAM9X35 Embedded MPU. It gives requirements concerning the different pin connections that must be considered before starting any new board design and describes the minimum hardware

CMD25

Abstract: MMC specification MMCA 4.3 atmel sd card module sd card atmel atmel sd card CMD18 SDHC specification PA15 PA18
Contextual Info: HSMCI on SAM9G15/G25/G35/X25/X35 Microcontrollers 1. Introduction SAM9G15/G25/G35/X25/X35 offer a High Speed Multimedia Speed Card Interface HSMCI , which supports MultiMedia Card (MMC) Specification V4.3, SD Memory Card Specification V2.0, SDIO Specification V2.0 and CE-ATA V1.1.

Contextual Info: AT91SAM ARM-based Embbedded MPU SAM9G35 DATASHEET Features • Core • • • • – ARM926EJ-S ARM Thumb® Processor running at up to 400 MHz @ 1.0V +/- 10% – 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories – One 64-Kbyte internal ROM embedding bootstrap routine: Boot on NAND Flash,

Contextual Info: AT91SAM ARM-based Embbedded MPU SAM9G25 DATASHEET Features • Core • • • • – ARM926EJ-S ARM Thumb® Processor running at up to 400 MHz @ 1.0V +/- 10% – 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories – One 64-Kbyte internal ROM embedding bootstrap routine: Boot on NAND Flash,

Contextual Info: AT91SAM ARM-based Embedded MPU SAM9X25 SUMMARY DATASHEET Description The SAM9X25 is a high-performance ARM926EJ-S -based embedded microprocessor unit, running at 400 MHz and featuring multiple networking/connectivity peripherals, optimized for industrial applications such as building automation, gateways

Contextual Info: AT91SAM ARM-based Embbedded MPU SAM9X25 DATASHEET Features • Core • • • • – ARM926EJ-S ARM Thumb® Processor running at up to 400 MHz @ 1.0V +/- 10% – 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories – One 64-Kbyte internal ROM embedding bootstrap routine: Boot on NAND Flash,

Contextual Info: AT91SAM ARM-based Embbedded MPU SAM9G15 DATASHEET Features • Core • • • • – ARM926EJ-S ARM Thumb® Processor running at up to 400 MHz @ 1.0V +/- 10% – 16 Kbytes Data Cache, 16 Kbytes Instruction Cache, Memory Management Unit Memories – One 64-Kbyte internal ROM embedding bootstrap routine: Boot on NAND Flash,

2525pF

Contextual Info: SAM50F thru SAM90F SAM50UF thru SAM90UF SOLID STATE DEVICES, INC 14849 Firestone Boulevard • La Mirada,CA 90638 Phone: 714 670-SSDI (7734) • Fax: (714) 522-7424 D esig n er’s Data Sheet 0.5 AMP 5000-9000 VOLTS 60-150 nsec HIGH VOLTAGE RECTIFIER FEATURES:

Contextual Info: AT91SAM ARM-based Embedded MPU SAM9G45 SUMMARY Description The ARM926EJ-S based SAM9G45 features the frequently demanded combination of user interface functionality and high data rate connectivity, including LCD Controller, resistive touch-screen, camera interface, audio, Ethernet 10/100 and

AT91BOOTSTRAP

Abstract: uboot SD buildroot arm Getting Started with the AT91SAM9261 320x240 TFT Touchscreen AT73C213 AT91SAM9261 Atmel touchscreen at45db AT91SAM9261EK
Contextual Info: SAM9-L9261 User Manual All boards produced by Olimex are ROHS compliant Rev.C, September 2009 Copyright c 2009, OLIMEX Ltd, All rights reserved INTRODUCTION: SAM9-L9261 is a development platform with ARM9 microcontroller, TFT LCD 3.5" 320x240 pixels with TOUCHSCREEN, 64MB SDRAM and 512MB