TSEC Search Results

KIR 1C

Abstract: I-1402 ATC1400 atc 1400a maintenance manual KIT-1C/TSEC ATC-1400A Mk10A atc 1400a maintenance manual calibration EN50082-1 specification ATC-1400A
Contextual Info: Avionics I-1402 Mode 4 Accessory Unit The I-1402 provides a friendly test solution for Mk10A and Mk12 IFF transponders and interrogators • NATO codified Operation • Easy to operate The I-1402 can provide a fixed simulation of a KIT/KIR TSEC1A/1C cryptographic computer, utilizing the NATO assigned A, B &

MPC8560 tsec

Abstract: tsec 88E1011S Marvell Ethernet PHY 88E1011S marvell ethernet switch MPC8560 tsec application MPC8560 tsec interrupt MPC8560ADS MARVELL SEMICONDUCTOR MPC8560
Contextual Info: Freescale Semiconductor Application Note Document Number: AN2925 Rev. 0, 11/2005 Initializing the TSEC Controller by Ahsan Kabir Digital Systems Division Freescale Semiconductor, Inc. Austin, TX This application note describes how to initialize the MPC8560 TSEC controller. The software is written for the

0x04c11db7

Abstract: CRC32POLY 0xEDB88320 0x990951BA 0x77073096 0xe963a535 4F10 AN2745 CRC32 CRC32C
Contextual Info: Freescale Semiconductor Application Note AN2745 Rev. 0, 07/2004 Setting Up TSEC Hash Tables by Dana Castillo NCSD Applications Freescale Semiconductor, Inc. Austin, TX This application note describes the procedure to setup the hash tables for the three-speed Ethernet controller TSEC .

MPC85xx tsec

Abstract: MPC85xx AN2652 "Ethernet Controller" MPC82xx MPC8560 tsec application MPC85xx user manual MPC8260 MPC8540 MPC8560
Contextual Info: Freescale Semiconductor, Inc. Application Note AN2652 Rev. 0, 2/2004 Freescale Semiconductor, Inc. Migrating to PowerQUICC IIITM TSEC from Previous Ethernet Controllers Jay Azurin, NCSD Applications Austin, TX When migrating to PowerQUICC IIITM microprocessor, it is necessary to understand the

6m138

Contextual Info: 6N138 6N139 SIEMENS LoW Input Current, High Gain Optocoupler FEATURES • High Current Transfer Ratio, 800% • Low input Current, 0.5mA • High Output Current, 60mA • Isolation Test Voltage, 2500 VACfwg • TTL Compatible Output, VOL=0.1 V • High Common Mode Rejection, BOOV^tsec.

ADS774SF

Abstract: mn574
Contextual Info: ADS774 8.5/tsec, 12-Bit SAMPLING AID CONVERTER MICRO NETWORKS DESCRIPTION • Low Cost • Pin-Compatible with MN574/674/774 • Eliminates External S/H in Most Applications • Complete, 8.5/tsec, 12-Bit A/D Converter with Internal Clock Reference Control Logic

MN5280

Abstract: MN5282 MN5284
Contextual Info: MN5280 MN5282 / K K f f M ic r o N e tw o r k s a d iv is i o n o r u n « t m o m c o r p o ra tio n DIP-PACKAGED 16-Bit A/D C O N V E R T E R S DESCRIPTION FEATURES • Small 32-Pin DIP • Internal Clock and Reference • Maximum Conversion Time: MN5280 100/tsec

n5205

Contextual Info: MN5200 Series I _ mmm M I C R O N E T W O R K S 50/*sec, 12-Bit MILITARY A/D C O N VERTERS DESCRIPTION • 50/tsec Maximum Conversion Time • +1/2LSB Linearity and No Missing Codes Guaranteed Over Temperature • Small 24-Pin DIP • +1LSB Zero Error • +2LSB Absolute Accuracy

Contextual Info: MN3660 LEADLESS PACKAGE 12-BIT LATCHED D/A CONVERTER • 24 Pin Hermetically Sealed Leadless Package • High Speed Input Register 40nsec Setup • ± Vz LSB Linearity and Monotonicity Guaranteed Over Temperature • ± 0.1 %FSR Unadjusted Accuracy • 10/tsec Maximum

Contextual Info: C S a * ^ ^ MN6231 MN6232 Micro Networks A DIVISION OF U N I T M M COftPOAATION 50kHz, SAMPLING 12-Bit A/D CONVERTERS DESCRIPTION FEATURES MN6231 and MN6232 are high-speed 15/tsec , pP interfaced (CS, CE, Ao, 12/8,3-state buffer), 12-bit, successive-approximation type A/D converters with internal track-hold (T/H)

MPC8560 tsec interrupt

Abstract: MPC85xx tsec tsec MPC85xx MPC8560 tsec application MPC8560 develop AN2652 MPC8260 MPC8540 MPC8560
Contextual Info: Freescale Semiconductor Application Note Document Number: AN2652 Rev. 1, 11/2006 Migrating to PowerQUICC III TSEC from Previous Ethernet Controllers Jay Azurin, DSD Applications Freescale Semiconductor, Inc. Austin, TX When migrating to a PowerQUICC™ III microprocessor, it

MN373

Abstract: Micro Networks mn373
Contextual Info: mCtwo=.= MN5284 Series MICRO NETWORKS LOW-POWER 16-Bit A/D C ONVERTERS DESCRIPTION • 16-Bit Resolution • 15-Bit No Missing Codes • 300mW Max Power Consumption • 50/tsec Max Conversion Time • Serial and Parallel Outputs • True-TTL and 5V-CMOS Compatible

MN5282

Abstract: MN373H MN373
Contextual Info: MN373 Iu LOW-COST HIGH-RESOLUTION TRACK-HOLD AMPLIFIER M ICR O N E T W O R K S DESCRIPTION FEATURES • Low C ost • C o m p a tib le w ith All D IP P ackaged 14-16 B it A /D ’s 10/tsec M ax A cq uisition T im e 10V S tep to ± 0 .0 0 3 % Specification

MN5212H

Abstract: mn5200 MN5212
Contextual Info: M N 5IOUS6C, 2 1 0 I ¿S“ Dell r i e s Micro Networks C m * a d iv is io n o f u n i t m o o k 13/tsec, 12-Bit MILITARY A /D C O N V E R T E R S c o rp o ra tio n DESCRIPTION FEATURES • 13psec Maximum Conversion Time • ± V2LSB Linearity and No Missing Codes

MN3850H

Abstract: nd1e DAC85-CBI-V DAC87 MN3850
Contextual Info: nj, MN3850 INDUSTRY-STANDARD MILITARY, 12-Bit D/A CONVERTERS wm m MICRO NETWORKS DESCRIPTION • Fully Guaranteed -5 5 °C to +125°C operation • L in e a rity and M o n o to n icity Guaranteed Over Temperature • 4/tsec S e ttlin g Tim e • Sm all 24-Pin H erm etic DIP

ADC8412

Contextual Info: ADC84 ADC85 i ! ! HIGH-SPEED, 12-Bit A/D C O N VE R TE R S MICRO NETWORKS DESCRIPTION • Fast Conversion Times: 8/tsec max. for 12 Bits 5/*sec max. for 10 Bits • ± V i LSB Linearity and No M issing Codes G uaranteed Over Tem perature • Com plete: Internal Reference

2N2389

Abstract: 2N2390 2N1711 Texas Instruments TI424
Contextual Info: TYPES 2N2389, 2N2390 N-P-N SILICON TRANSISTORS B U L L E T I N N O . D L -S 6 4 6 0 2 7 , O C T O B E R 1 9 6 4 FOR GENERAL PURPOSE AMPLIFIER AND SWITCHING APPLICATIONS FROM <0.1 ma to >150 mo, dc to 30 Me Formerly TI424 and TI425 * Electrically Similar to 2N1613 and 2N1711

atmel100

Abstract: AT25DQ321 AT25DQ161 AT25DQ
Contextual Info: Atmel AT25DQ161 16-Mbit, 2.7V Minimum SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support Features DATASHEET Not Recommended for New Designs Use AT25DQ321  Single 2.7V - 3.6V supply  Serial Peripheral Interface SPI compatible Supports SPI Modes 0 and 3

AT49BV802A

Abstract: AT49BV802AT AT49BV802AT-70CI at49bv802a-70tu
Contextual Info: Features • Single Voltage Read/Write Operation: 2.65V to 3.6V • Access Time – 70 ns • Sector Erase Architecture • • • • • • • • • • • • • – Fifteen 32K Word 64K Bytes Sectors with Individual Write Lockout – Eight 4K Word (8K Bytes) Sectors with Individual Write Lockout

AT49BV320D

Abstract: AT49BV320DT SA70 AT49BV
Contextual Info: Features • Single Voltage Read/Write Operation: 2.65V to 3.6V • Access Time – 70 ns • Sector Erase Architecture • • • • • • • • • • • • • • – Sixty-three 32K Word 64K Bytes Sectors with Individual Write Lockout – Eight 4K Word (8K Bytes) Sectors with Individual Write Lockout

48C20

Abstract: SA125 AT49BV640DT-70CU AT49BV640D AT49BV640DT AT49BV640D-70CU SWITCH SA125 278000 eprom
Contextual Info: Features • Single Voltage Operation Read/Write: 2.65V - 3.6V • Access Time – 70 ns • Sector Erase Architecture • • • • • • • • • • • • • – One Hundred Twenty-seven 32K Word 64K Bytes Main Sectors with Individual Write Lockout

S 3590A

Abstract: AT49BV163D AT49BV163DT AT49BV163DT-70TU
Contextual Info: Features • Single Voltage Read/Write Operation: 2.65V to 3.6V • Fast Read Access Time – 70 ns • Sector Erase Architecture • • • • • • • • • • • • • – Thirty-one 32K Word 64K Bytes Sectors with Individual Write Lockout

AT25DF081A

Abstract: AT25DF081A-SH AT25DF081A-SSH-T 8715a
Contextual Info: Features • Single 2.7V - 3.6V Supply • Serial Peripheral Interface SPI Compatible • • • • • • • • • • • • • • • • – Supports SPI Modes 0 and 3 – Supports RapidS Operation – Supports Dual-Input Program and Dual-Output Read

H1P transistor with three end

Abstract: SSO20 U2782B U2782B-AFS U2782B-AFSG3 rfd210 SR 13007
Contextual Info: U2782B 1100-MHz Twin PLL Description The IC U2782B is a low-power twin PLL manufactured with Atmel Wireless & Microcontrollers’ advanced UHF process. The maximum operating frequency is 1100 MHz for both PLLs. The device features a wide supply-voltage range from 2.7 V to 5.5 V. A prescaler 64/65 and powerdown function for both PLLs are integrated. The twin