TN115 Search Results

PR66A

Abstract: PR63A PR28B PR43A pr64a PR67A pb37a PL34A PT100B pr19a
Contextual Info: LatticeECP2/M Pin Assignment Recommendations August 2009 Technical Note TN1159 Introduction The LatticeECP2 and LatticeECP2M™ device families are designed for high-speed FPGA system applications. As with any high-speed system design, care must be given to certain critical pins that are designed to supply the

"higig header"

Abstract: higig specification higig protocol overview TN1154 cx4 to sma BCM56802 higig pause frame ir9216 BROADCOM higig2
Contextual Info: LatticeSC/M Broadcom HiGig+ 12 Gbps Physical Layer Interoperability Over CX-4 August 2007 Technical Note TN1154 Introduction This technical note describes a physical layer HiGig+ 12 Gbps interoperability test between a LatticeSC/M device and the Broadcom BCM56802 network switch. The test was limited to the physical layer up to XGMII of the 10

frequency detection using FPGA

Contextual Info: LatticeSC PURESPEED I/O Adaptive Input Logic User’s Guide April 2008 Technical Note TN1158 Introduction Today’s high speed synchronous interfaces pose challenges to the designer in maintaining clock-to-data relationships, managing data-to-data skew, and sustaining jitter tolerance. Many next-generation interconnects use SERDES based interfaces where the clock is embedded inside the data signal. SERDES-based interfaces, however,

higig specification

Abstract: "higig header" BCM56800 bcm pause frame rdbgc0 higig protocol overview IR9216 broadcom bcm BCM0 BCM 10G
Contextual Info: LatticeSC/M Broadcom XAUI/HiGig 10 Gbps Physical Layer Interoperability Over CX-4 August 2007 Technical Note TN1155 Introduction This technical note describes a physical layer 10-Gigabit Ethernet and HiGig 10 Gbps interoperability test between a LatticeSC/M device and the Broadcom BCM56800 network switch. The test was limited to the physical

higig specification

Abstract: rdbgc0 BCM56580 cx4 to sma GMII layout bcm pause frame 1000BASE-X GR-255 BCM5658 BCM0
Contextual Info: LatticeSC/M Broadcom 2.5 GbE Physical Layer Interoperability Over CX-4 August 2007 Technical Note TN1156 Introduction This technical note describes a 1000BASE-X physical layer Gigabit Ethernet interoperability test between a LatticeSC/M device and the Broadcom BCM56580 network switch. The test was limited to the physical layer up to

BCM56800

Abstract: higig specification ethernet BCM Gigabit LFSC3GA25E 1000BASE-X higig pause frame cx4 to sma bcm pause frame 1gbps serdes
Contextual Info: LatticeSC/M Broadcom 1-Gigabit Ethernet Physical Layer Interoperability Over CX-4 August 2007 Technical Note TN1157 Introduction This technical note describes a 1000BASE-X physical layer Gigabit Ethernet interoperability test between a LatticeSC/M device and the Broadcom BCM56800 network switch. The test was limited to the physical layer up to

frequency detection using FPGA

Contextual Info: LatticeSC PURESPEED I/O Adaptive Input Logic User’s Guide June 2010 Technical Note TN1158 Introduction Today’s high speed synchronous interfaces pose challenges to the designer in maintaining clock-to-data relationships, managing data-to-data skew, and sustaining jitter tolerance. Many next-generation interconnects use

verilog code of prbs pattern generator

Abstract: verilog code 16 bit LFSR in PRBS prbs using lfsr verilog prbs generator LFE2M50E prbs generator
Contextual Info: LatticeECP2M PRBS SERDES Demo User’s Guide June 2010 Technical Note TN1153 Introduction This demo illustrates the SERDES/PCS abilities of the LatticeECP2M FPGA family. It does this by embedding a simple pseudo-random pattern into an 8b10b-encoded PCS payload, then looping back the payload, and checking

verilog prbs generator

Abstract: verilog code of prbs pattern generator verilog code 16 bit LFSR in PRBS fpga loader ECP2M LFE2M50E TN1124 prbs generator ISPVM
Contextual Info: LatticeECP2M PRBS SERDES Demo User’s Guide August 2009 Technical Note TN1153 Introduction This demo illustrates the SERDES/PCS abilities of the LatticeECP2M FPGA family. It does this by embedding a simple pseudo-random pattern into an 8b10b-encoded PCS payload, then looping back the payload, and checking

417 847

Contextual Info: DS1006J_ver3.9 Jan. 2012 あ LatticeECP2/M ファミリ・データシート DS1006J Version 03.9, Jan. 2012 2012 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are trademarks or registered trademarks of their respective holders.

Contextual Info: LatticeSC/M Family Data Sheet DS1004 Version 02.1, June 2008 LatticeSC/M Family Data Sheet Introduction January 2008 Data Sheet DS1004 Features • High Performance FPGA Fabric • 15K to 115K four input Look-up Tables LUT4s • 139 to 942 I/Os • 700MHz global clock; 1GHz edge clocks

prbs pattern generator using vhdl

Abstract: BUT16
Contextual Info: LatticeECP2/M Family Handbook HB1003 Version 04.9, April 2011 LatticeECP2/M Family Handbook Table of Contents April 2011 Section I. LatticeECP2/M Family Data Sheet Introduction Features . 1-1

lfe2m35e7fn484c

Contextual Info: LatticeECP2/M Family Data Sheet DS1006 Version 02.7, July 2007 LatticeECP2/M Family Data Sheet Introduction July 2007 Advance Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support

LFE2M35se

Abstract: LFE2M50SE ECP2M lfe2m35se 7fn256c LFE2M20SE-5FN256C LFE2M20SE-6FN484C LFE2M70SE-5FN900C
Contextual Info: LatticeECP2/M Family Data Sheet Introduction Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support – SPI4.2, SFI4 DDR Mode , XGMII – High Speed ADC/DAC devices

TN1176 LatticeECP3 SERDES/PCS Usage Guide

Abstract: CML buffer BLM41PG471SN1L TN1114 TN1189 900-BGA tn1124 signal path designer
Contextual Info: Electrical Recommendations for Lattice SERDES February 2010 Technical Note TN1114 Introduction LatticeECP3, LatticeECP2/M, and LatticeSC/M SERDES integrates high-speed, differential Current Mode Logic CML input and output buffers which offer significant advantages in switching speed while providing improved

TN116

Abstract: TN115
Contextual Info: NTC Disc Thermistors ND 03/06/09 • NE 03/06/09 • NV 06/09 APPLICATIONS • Commodity Product: 2 families ND or NE : general purpose NV : professional • Alarm and temperature measurement application • Temperature regulation application • Level detection application

LFE2M20

Abstract: LFE2M35se 672-BALL FN484 F1156
Contextual Info: LatticeECP2/M Family Data Sheet Introduction Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support – SPI4.2, SFI4 DDR Mode , XGMII – High Speed ADC/DAC devices

DS1006

Abstract: LFE2-50E-7FN484C LFE2-6E-5TN144I lfe2-6se-6fn256c LFE2-6E-6TN144C LFE2-6SE-6FN256 LFE2-50E-5FN672C LFE2-20E-6FN672C LFE2-6E-6FN256C LFE2-12E-5FN484C
Contextual Info: LatticeECP2/M Family Data Sheet Introduction Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support – SPI4.2, SFI4 DDR Mode , XGMII – High Speed ADC/DAC devices

QD004

Abstract: BUT16
Contextual Info: LatticeECP2/M Family Handbook HB1003 Version 03.5, February 2008 LatticeECP2/M Family Handbook Table of Contents February 2008 Section I. LatticeECP2/M Family Data Sheet Introduction Features . 1-1

sgmii switch

Contextual Info: LatticeECP2/M Family Data Sheet DS1006 Version 03.5, November 2009 LatticeECP2/M Family Data Sheet Introduction June 2008 Data Sheet DS1006 Features Pre-Engineered Source Synchronous I/O • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support

Contextual Info: LatticeECP2/M Family Data Sheet DS1006 Version 03.0, February 2008 LatticeECP2/M Family Data Sheet Introduction August 2007 Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support

NTC THERMISTORS nd06

Abstract: ND06 TN115 N03P 03P00333 03N00103 N03K 06Q00223 03L00272 TN116
Contextual Info: NTC Disc Thermistors ND 03/06/09 • NE 03/06/09 • NV 06/09 APPLICATIONS • Commodity Product: 2 families ND or NE : general purpose NV : professional • Alarm and temperature measurement application • Temperature regulation application • Level detection application

LFE2-12E-5TN144C

Abstract: LFE2-6E-6TN144C LFE2-6E-5TN144I LFE2-12E-5FN484C LFE2-6E-5TN144C lfe2-12e-6fn484c DS1006 LFE2-20E-6FN256C
Contextual Info: LatticeECP2/M Family Data Sheet Introduction Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support – SPI4.2, SFI4 DDR Mode , XGMII – High Speed ADC/DAC devices

LFE2M50E-5FN484C

Abstract: LFE2M50e lfe2m35e-7fn484c LFE2M20E-5FN256C LFE2M50E-5FN900C LFE2M50E-6FN484C lfe2m20e-6fn256c LFE2M35E-5FN672C lfe2m20e-6fn484c LFE2M20E
Contextual Info: LatticeECP2/M Family Data Sheet Introduction Data Sheet DS1006 • Pre-Engineered Source Synchronous I/O Features • DDR registers in I/O cells • Dedicated gearing logic • Source synchronous standards support – SPI4.2, SFI4 DDR Mode , XGMII – High Speed ADC/DAC devices