The TL3016IPWR can operate from -40°C to 125°C, but the maximum junction temperature (TJ) should not exceed 150°C.
To ensure stability, a minimum output capacitance of 10uF is recommended, and the ESR (Equivalent Series Resistance) should be less than 1 ohm. Additionally, a 1uF ceramic capacitor should be placed between the VIN and GND pins.
The TL3016IPWR can handle a maximum input voltage of 18V, but it's recommended to keep the input voltage below 15V to ensure reliable operation.
The output voltage (VOUT) can be calculated using the formula: VOUT = 1.25V x (1 + R1/R2), where R1 and R2 are the resistors connected to the FB pin.
The quiescent current (IQ) of the TL3016IPWR is typically around 5mA, but it can vary depending on the input voltage and output load.
TL3016IPWR datasheet
by Texas Instruments
