UTMI Search Results

CY7C680

Abstract: tx2u CY7C6800 00XXXXB aupo
Contextual Info: CY7C68003 MoBL-USB TX2UL USB 2.0 ULPI Transceiver Features • UART pass through mode The Cypress MoBL-USB™ TX2UL is a low voltage high speed HS USB 2.0 UTMI+ Low Pin Interface (ULPI) Transceiver. The TX2UL is specifically designed for mobile handset applications

6SLX150-2

Abstract: verilog code for dma controller synchronous fifo design in verilog interrupt controller verilog code 6SLX150 6VCX240-2 verilog hdl code for programmable peripheral interface
Contextual Info: Full compliance with the USB 2.0 specification USBHS-DEV High Speed USB Device Controller Core The USBHS-DEV core implements a complete high/full-speed 480/12 Mbps peripheral controller that interfaces to a UTMI USB port transceiver on one side and to a system’s

FUSB2805MLX

Contextual Info: FUSB2805 USB2.0 High-Speed OTG Transceiver with ULPI Interface Features Description • Complies with USB 2.0, OTG Rev 1.3 Supplement, and ULPI Rev 1.1 Specifications • Supports 480 Mbps, 12 Mbps, and 1.5 Mbps USB2.0 Speeds The FUSB2805 is a UTMI+ Low-Pin Interface ULPI

ic 812

Abstract: USB3250-ABZJ 56-PIN CRC-16 GT3200 GT3200-JD GT3200-JN USB3250
Contextual Info: GT3200 64-PIN TQFP PACKAGES USB3250 (56-PIN QFN PACKAGE) USB2.0 PHY IC PRODUCT FEATURES • ■ ■ ■ ■ ■ ■ ■ Datasheet USB-IF "Hi-Speed" certified to USB2.0 electrical specification Interface compliant with the UTMI specification (60MHz 8-bit unidirectional interface or 30MHz 16-bit

usb3280

Abstract: CRC-16 MO-220 USB3280-AEZG
Contextual Info: USB3280 Hi-Speed USB Device PHY with UTMI Interface PRODUCT FEATURES „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ Datasheet Available in a 36-pin lead-free RoHS compliant 6 x 6 x 0.90mm QFN package Interface compliant with the UTMI specification

CRC-16

Abstract: MO-220 USB3250 USB3280 USB3450 USB3450-FZG USB3500 mini usb connector right angle
Contextual Info: USB3450 Hi-Speed USB Host or Device PHY With UTMI+ Interface PRODUCT FEATURES „ „ „ „ „ „ „ „ „ Datasheet USB-IF “Hi-Speed” certified to the Universal Serial Bus Specification Rev 2.0 Interface compliant with the UTMI+ Specification, Revision 1.0.

USB3450-FZG

Abstract: USB3450 MO-220 USB3250 USB3280 USB3500
Contextual Info: USB3450 Hi-Speed USB Host or Device PHY With UTMI+ Interface PRODUCT FEATURES „ „ „ „ „ „ „ „ „ Data Brief USB-IF “Hi-Speed” certified to the Universal Serial Bus Specification Rev 2.0 Interface compliant with the UTMI+ Specification, Revision 1.0.

camera module

Abstract: CD00222693 ISP1512 IC HS 8108 power supply 81013 hs 8109 lm 8712
Contextual Info: ISP1512A ULPI Hi-Speed USB transceiver Rev. 03 — 16 December 2009 Product data sheet 1. General description The ISP1512A is a UTMI+ Low Pin Interface ULPI Hi-Speed Universal Serial Bus (USB) transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0 and

Contextual Info: ISP1507C; ISP1507D ULPI Hi-Speed USB host and peripheral transceiver Rev. 03 — 22 October 2009 Product data sheet 1. General description The ISP1507 is a Universal Serial Bus USB high-speed host and peripheral transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0 and UTMI+ Low Pin

IC HS 8108 power supply

Abstract: 1514A camera module ISP1514 lm 8712
Contextual Info: ISP1514A ULPI Hi-Speed USB transceiver Rev. 03 — 16 December 2009 Product data sheet 1. General description The ISP1514A is a UTMI+ Low Pin Interface ULPI Hi-Speed Universal Serial Bus (USB) transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0 and

TSMC 0.35Um

Abstract: TSMC 0.35um digital 0.35Um tsmc crc-16 implementation
Contextual Info: 4 Genesys Logic, Inc. GL800HT25 USB 2.0 UTMI Compliant Transceiver IP Core Datasheet Revision 1.30 Nov. 28, 2002 GL800HT25 USB 2.0 UTMI Compliant Transceiver IP Core Copyright: Copyright 2003 Genesys Logic Incorporated. All rights reserved. No part of the materials may be

Contextual Info: GT3200 USB 2.0 PHY IC Datasheet Product Features Bit stuffing and unstuffing with error detection USB-IF “Hi-Speed” certified to USB 2.0 electrical specification Supports the USB suspend state, HS detection, HS Chirp, Reset and Resume Interface compliant with the UTMI specification

Contextual Info: USB3280 Hi-Speed USB Device PHY with UTMI Interface PRODUCT FEATURES „ „ „ „ „ „ „ „ „ „ „ „ „ Datasheet Available in a 36-pin lead-free RoHS compliant 6 x 6 x 0.90mm QFN package Interface compliant with the UTMI specification (60MHz, 8-bit bidirectional interface)

USB3250-ABZJ

Abstract: USB3250 GT3200-JV MO-220 8x8 68 56-PIN CRC-16 GT3200 GT3200-JD GT3200-JN debounce IC
Contextual Info: GT3200 64-PIN TQFP PACKAGES USB3250 (56-PIN QFN PACKAGE) USB2.0 PHY IC PRODUCT FEATURES „ „ „ „ „ „ „ „ Datasheet USB-IF "Hi-Speed" certified to USB2.0 electrical specification Interface compliant with the UTMI specification (60MHz 8-bit unidirectional interface or 30MHz 16-bit

Contextual Info: USB3290 Small Footprint Hi-Speed USB 2.0 Device PHY with UTMI Interface PRODUCT FEATURES „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ „ Data Brief Available in a 40 ball lead-free RoHS compliant 4 x 4 x 0.9mm VFBGA package Interface compliant with the UTMI specification

CY3683

Abstract: FX2_PCB CY7C68000A CY7C68000A-56BAXC CY7C68000A-56LFXC CY7C68000A-56LTXC CY7C68000A-56LTXCT usb encoding circuit diagram MO-195C
Contextual Info: CY7C68000A MoBL-USB TX2 USB 2.0 UTMI Transceiver MoBL-USB™ TX2 Features • Supports Transmission of Resume Signaling ■ UTMI-Compliant and USB 2.0 Certified for Device Operation ■ 3.3V Operation ■ Operates in Both USB 2.0 High Speed HS , 480 Mbits/second,

Contextual Info: SAF1508BET ULPI Hi-Speed Universal Serial Bus On-The-Go transceiver Rev. 2 — 23 July 2012 Product data sheet 1. General description The SAF1508BET is a UTMI+ Low Pin Interface ULPI Universal Serial Bus (USB) transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0,

TSMC 0.35Um

Contextual Info: 4 Genesys Logic, Inc. GL800AHU35 USB 2.0 UTMI Compliant Transceiver IP Core Datasheet Preliminary Revision 0.91 Aug. 07, 2003 GL800AHU35 USB 2.0 UTMI Compliant Transceiver IP Core Copyright: Copyright 2003 Genesys Logic Incorporated. All rights reserved. No part of the materials may be

Contextual Info: Data Sheet, Rev. 2 June 2002 Agere Systems USB 2.0 UTMI USS2X1 8-Bit and USS2X1W 16-Bit PHY Chips Introduction Description The USS2X1 W PHY chip provides a serial electrical interface that is compliant with the USB specification revision 2.0. The chip contains sufficient capabilities to

isp1705aet

Abstract: ISP1705 isp1705 Hi-Speed Universal Serial Bus host control ISP1705HN HVQFN36 JESD22-A114D MO-220 SMD 6PIN IC MARKING CODE
Contextual Info: ISP1705 ULPI Hi-Speed USB transceiver Rev. 01 — 13 June 2008 Product data sheet 1. General description The ISP1705 is a UTMI+ Low Pin Interface ULPI Hi-Speed Universal Serial Bus (USB) transceiver that is fully compliant with Universal Serial Bus Specification Rev. 2.0,

atx SMPS block DIAGRAM

Abstract: IPC SM782
Contextual Info: FUSB2805 USB2.0 High-Speed OTG Transceiver with ULPI Interface Features Description • Complies with USB 2.0, OTG Rev 1.3 Supplement, and ULPI Rev 1.1 Specifications • Supports 480 Mbps, 12Mbps, and 1.5Mbps USB2.0 Speeds The FUSB2805 is a UTMI+ Low-Pin Interface ULPI

cy7c68000

Abstract: CY7C68000-56PVC CY7C68000-56PVCT
Contextual Info: CY7C68000 CY7C68000 TX2 USB 2.0 UTMI Transceiver Cypress Semiconductor Corporation Document #: 38-08016 Rev. *C • 3901 North First Street • San Jose, CA 95134 • 408-943-2600 Revised February 20, 2003 CY7C68000 TABLE OF CONTENTS 1.0 EZ-USB TX2 FEATURES . 3

ISI-200

Abstract: utmi
Contextual Info: USB 2.0 PHY Macro-cell Overview The ISI-200 is a Mixed-signal Core that includes both the Digital and Analog blocks of the USB Transceiver Macro-cell UTMI Specifications. This Core is a mature product that was originally certified in Q1 2002 and the same technology has been used in our

NRZ encoder

Abstract: ISI-205
Contextual Info: ISI-205 USB 2.0 High-Speed Host PHY Macro-cell Overview Innovative Partners Program The ISI-205 is a Mixed-signal Core that includes both the Digital and Analog blocks. It Supports Device and Host applications. It is a mature product based on a USB 2.0 Device Transceiver Macro-cell UTMI core