TEIKOKU Search Results

Contextual Info: Product Specification PE4305 50 Ω RF Digital Attenuator 5-bit, 15.5 dB, DC – 4.0 GHz Product Description The PE4305 is a high linearity, 5-bit RF Digital Step Attenuator DSA covering a 15.5 dB attenuation range in 0.5 dB steps, and is pin compatible with the PE430x series. This 50-ohm RF

Contextual Info: AN523 O VERLAY C ONSIDERATIONS FOR T H E Si114 X S ENSOR 1. Introduction The Si1141/42/43 infrared proximity detector with integrated ambient light sensor ALS is a flexible, highperformance solution for proximity-detection applications and (visible) ambient-light sensing challenges. The

PE42612

Abstract: PE42612-00 PE42612-90 PE42612-91
Contextual Info: Product Brief PE42612 Flip Chip SP4T UltraCMOS 2.6 V Switch 100 – 3000 MHz Figure 1. Functional Diagram Features • Two pin CMOS logic control inputs • Supports 1.8 V Control Logic • Low TX insertion loss: 0.55 dB at TX1 RX1 TX2 RX2 CMOS Control/Driver

PE43701

Abstract: 24 leads qfn 5x5 9380 32QFN PE43703 X1001001
Contextual Info: Product Specification PE43703 50 Ω RF Digital Attenuator 7-bit, 31.75 dB, DC-6.0 GHz, VssEXT option Product Description The PE43703 is a HaRP -enhanced, high linearity, 7-bit RF Digital Step Attenuator DSA . This highly versatile DSA covers a 31.75 dB attenuation range in 0.25 dB, 0.5 dB, or 1.0

Contextual Info: Product Specification PE4237 SPDT UltraCMOS RF Switch DC - 4000 MHz Product Description The PE4237 RF Switch is designed to cover a broad range of applications from near DC to 4000 MHz. This reflective switch integrates on-board CMOS control logic driven by a single-pin,

Contextual Info: Product Specification PE97632 DIE 3.5 GHz Delta-Sigma modulated Fractional-N Frequency Synthesizer for Low Phase Noise Applications Product Description Peregrine’s PE97632 is a high performance fractional-N PLL capable of frequency synthesis up to 3.5 GHz. The device is

qualcomm 7500

Abstract: rf spdt mhz dbm 32 pins qfn 5x5 footprint E k m QFN 3X3 F QFN 3X3 PE42692 QUALCOMM Reference design QUALCOMM QFN GSM qualcomm PE3336
Contextual Info: 2008 Product Selection Guide Changing how you design RF. Forever. Welcome to Peregrine Semiconductor UltraCMOS RF Process Technology Peregrine Semiconductor is a leading supplier of high-performance RF CMOS and mixed-signal communications ICs which are ideally suited for

quad mosfet array

Abstract: 731 MOSFET PE84140 PE84140-EK 8 mosfet array F617
Contextual Info: Product Specification PE84140 Ultra-High Linearity UltraCMOS Broadband Quad MOSFET Array Product Description Features • Ultimate Quad MOSFET array The PE84140 is an ultra-high linearity, passive broadband Quad MOSFET array with high dynamic range performance

PE9701

Abstract: 7227 up down counter
Contextual Info: Product Specification PE9701 3000 MHz UltraCMOS Integer-N PLL Rad Hard for Space Applications Product Description Peregrine’s PE9701 is a high-performance integer-N PLL capable of frequency synthesis up to 3.0 GHz. The device is designed for superior phase noise performance while

PE33361

Abstract: fp13
Contextual Info: Advance Information PE33361 3500 MHz UltraCMOS Integer-N PLL Product Description Features Peregrine’s PE33361 is a high-performance integer-N PLL capable of frequency synthesis up to 3500 MHz. The device is designed for superior phase noise performance

Contextual Info: Product Specification PE3513 1500 MHz Low Power UltraCMOS Divide-by-8 Prescaler Product Description The PE3513 is a high-performance static UltraCMOS™ prescaler with a fixed divide ratio of 8. Its operating frequency range is DC to 1500 MHz. The PE3513 operates on a nominal

Contextual Info: Product Specification PE4308 75 Ω RF Digital Attenuator 5-bit, 31 dB, DC – 4.0 GHz Product Description The PE4308 is a high linearity, 5-bit RF Digital Step Attenuator DSA covering 31 dB attenuation range in 1dB steps, and is pin compatible with the PE430x series. This 75-ohm RF DSA

Contextual Info: Product Specification PE4305 50 Ω RF Digital Attenuator 5-bit, 15.5 dB, DC – 4.0 GHz Product Description Features • Attenuation: 0.5 dB steps to 15.5 dB • Flexible parallel and serial programming interfaces • Latched or direct mode • Unique power-up state selection

Contextual Info: Product Specification PE95420 RF SPDT Switch Hermetically sealed ceramic package 1 – 8500 MHz Product Description The PE95420 is an RF SPDT single pole double throw switch and is available in a hermetically sealed ceramic package. The PE95420 is designed to cover a broad range of applications

Contextual Info: Product Specification PE43404 75 Ω RF Digital Attenuator 4-bit, 15 dB, DC – 2.0 GHz Product Description Features • Attenuation: 1.0 dB steps to 15 dB • Flexible parallel and serial programming interfaces • Parallel latched or direct mode • High attenuation accuracy and linearity

Contextual Info: Product Specification PE9763 3.2 GHz Delta-Sigma modulated Fractional-N Frequency Synthesizer for Low Phase Noise Applications Product Description Peregrine’s PE9763 is a high performance fractional-N PLL capable of frequency synthesis up to 3.2 GHz. The device is

Contextual Info: Product Specification PE94302 Product Description The PE94302 is a high linearity, 6-bit UltraCMOS RF Digital Step Attenuator DSA . This 50-ohm RF DSA covers a 31.5 dB attenuation range in 0.5 dB steps. It provides both parallel and serial CMOS control interface. The PE94302 maintains high

Contextual Info: Product Specification PE43702 50 Ω RF Digital Attenuator 7-bit, 31.75 dB, 9 kHz - 4.0 GHz Product Description The PE43702 is a HaRP -enhanced, high linearity, 7-bit RF Digital Step Attenuator DSA . This highly versatile DSA covers a 31.75 dB attenuation range in 0.25 dB steps. The

Contextual Info: Product Specification PE9702 3000 MHz UltraCMOS Integer-N PLL Rad Hard for Space Applications Product Description Peregrine’s PE9702 is a high-performance integer-N PLL capable of frequency synthesis up to 3000 MHz. The device is designed for superior phase noise performance

Contextual Info: Product Specification PE43501 50 Ω RF Digital Attenuator 5-bit, 7.75 dB, 9 kHz - 6.0 GHz Features • HaRP -enhanced UltraCMOS™ device • Attenuation: 0.25 dB steps to 7.75 dB • High Linearity: Typical +58 dBm IP3 • Excellent low-frequency performance

Contextual Info: Product Specification PE9304 1 GHz - 7 GHz Low Power UltraCMOS Divide-by-2 Prescaler Rad-hard for Space Applications Product Description The PE9304 is a high-performance UltraCMOS™ prescaler with a fixed divide ratio of 2. Its operating frequency range is

Contextual Info: Product Specification PE4239 SPDT UltraCMOS RF Switch Product Description Features • Single-pin or complementary CMOS logic control inputs • +3.0-volt power supply needed for single-pin control mode The PE4239 UltraCMOS™ RF Switch is designed to cover a

Contextual Info: Product Specification PE3512 1500 MHz Low Power UltraCMOS Divide-by-4 Prescaler Product Description The PE3512 is a high-performance static UltraCMOS™ prescaler with a fixed divide ratio of 4. Its operating frequency range is DC to 1500 MHz. The PE3512 operates on a nominal

PE42552

Abstract: PE4251 F QFN 3X3 PE42440 pe4259 PE4257 PE4283 PE4210 PE42451 PE4246
Contextual Info: Wireless RF Switches May 2010 Highly Rugged UltraCMOS Switches Extend Performance to 13.5 GHz High Linearity, 4 kV HBM ESD and CMOS Control Interface Ideal for Wireless Applications The Peregrine UltraCMOS™ RF switches feature high ESD tolerance, high linearity, high isolation and low insertion