156933 Search Results

Contextual Info: FUJITSU SEMICONDUCTOR DATA SHEET DS04-33101-1E ASSP ISO/IEC15693 Compliant FRAM Embedded High-speed RFID LSI MB89R118 • DESCRIPTION The MB89R118 is an LSI device that has built-in high-speed, large-capacity FRAM and is used for vicinity-RFID. ■ FEATURES

MLX90129

Contextual Info: MLX90129 13.56MHZ SENSOR TAG / DATALOGGER IC Features and Benefits Application Examples Versatile A/D interface for resistive sensors ISO-15693 13.56MHz transponder Slave / Master SPI interface 4 k-bit EEPROM with access protection Standalone data-logging mode

moa2

Abstract: 7816-6A1 HC 8332 SL2FCS5001 SL2FCS5101 i-code 2 tag chip SOT500AA1 ICODE SLI DSFI ICODE SLI-L
Contextual Info: SL2 ICS50/SL2 ICS51 I•CODE SLI-L/I•CODE SLI-L HC Rev. 3.0 — 14 March 2007 136430 Product data sheet PUBLIC 1. General description The I•CODE SLI-L/I•CODE SLI-L HC IC is a dedicated chip for smart label applications with the need for a leaner custom-specific command set, smaller memory and/or a

Contextual Info: M24LR16E-R Dynamic NFC/RFID tag IC with 16-Kbit EEPROM, energy harvesting, I²C bus and ISO 15693 RF interface Datasheet - production data Contactless interface • ISO 15693 and ISO 18000-3 mode 1 compatible • 13.56 MHz ±7k Hz carrier frequency SO8 MN

Contextual Info: LRI2K 2048 bit EEPROM TAG IC at 13.56 MHz with 64-bit UID and KILL code, ISO15693 and ISO18000-3 Mode 1 compliant Preliminary Data Features • ISO15693 standard fully compliant ■ ISO18000-3 mode 1 standard fully compliant ■ 13.56 MHz ±7k Hz carrier frequency

MB89R119B

Contextual Info: FUJITSU SEMICONDUCTOR PRE20110930E ASSP ISO/IEC 15693 Compliant FRAM Embedded High-speed RFID LSI TM MB89R119B • DESCRIPTION The MB89R119B is a vicinity type of RFID LSI device embedded with 256 bytes FRAM, which enables fast and frequent write operation.

14443-4 type b command

Abstract: MAX66020 14443-4
Contextual Info: 19-5540; Rev 0; 12/10 KIT ATION EVALU E L B AVAILA ISO/IEC 14443 Type B-Compliant 1Kb Memory Fob The MAX66020 combines 1024 bits of user EEPROM, a 64-bit unique identifier UID , and a 13.56MHz RF interface (ISO/IEC 14443 Type B, Parts 2-4) in a plastic key

eeprom programmer schematic easy design universal

Abstract: eeprom programmer schematic diagram spi flash programmer schematic infineon XE166 spi eeprom flash programmer schematic memtool 0x8408 memtool c166 family AP16095 M25P80
Contextual Info: Application Note, V1.0, October 2007 AP16128 XE166 Family Programming the on-chip Flash using the SSC Bootstrap Loader Microcontrollers Edition 2007-10 Published by Infineon Technologies AG 81726 Munich, Germany 2007 Infineon Technologies AG. All Rights Reserved.

Contextual Info: 3MTM RFID Premium Tag – Technical Data Sheet 57mm x 48mm 2.25” x 1.89” 75-0500-6593-9 Description This tag is provided as a pressure sensitive label on a silicon paper liner. The tags are wound on a single tag width roll. The integrated circuit is a 13.56 MHz 2048 bit memory design that is ISO

m24lr64

Abstract: ufdfpn8 GSM sectoring antenna sda 2023 ISO15693 M24LR64-R M24LR-64-R M24LR
Contextual Info: M24LR64-R 64 Kbit EEPROM with password protection & dual interface: 400 kHz I²C serial bus & ISO 15693 RF protocol at 13.56 MHz Features I2C interface • Two-wire I2C serial interface supports 400 kHz protocol ■ Single supply voltage: – 1.8 V to 5.5 V

ICODE Coil design guide

Abstract: M92x 156932
Contextual Info: SL2ICS2001DW/V1D I-CODE SLI Label IC bumped wafer specification on UV-tape Rev. 3.0 — 5 February 2008 Product data sheet addendum 150030 PUBLIC 1. General description This specification describes the electrical, physical and dimensional properties of Au-bumped sawn wafers on FFC with UV-tape of I-CODE SLI Label ICs on an NXP

a1s package

Abstract: 182T2 block diagram of VCD block diagram of VCD and its functions cyclic redundancy check LRI512 ISO15693 1 out of 4 inventory request CRC16 ISO15693 LRI512 ISO10373-7
Contextual Info: LRI512 ISO 15693 standard compliant, 13.56 MHz, 512 bit, high-endurance EEPROM TAG IC with EAS Not For New Design Features • ISO 15693 standard: fully compliant ■ 13.56 MHz ±7 kHz carrier frequency ■ To the LRI512: – 10% or 100% ASK modulation using:

Contextual Info: LRI2K 2048-bit EEPROM tag IC at 13.56 MHz, with 64-bit UID and kill code, ISO 15693 and ISO 18000-3 Mode 1 compliant Features • ISO 15693 standard fully compliant ■ ISO 18000-3 Mode 1 standard fully compliant ■ 13.56 MHz ±7 kHz carrier frequency ■

m24lr04

Abstract: M24LR04E-RDW M24LR04E-R 24L04 m24lr04e ISO103
Contextual Info: M24LR04E-R 4-Kbit EEPROM with password protection, dual interface & energy harvesting: 400 kHz I²C bus & ISO 15693 RF protocol at 13.56 MHz Datasheet - production data Contactless interface • ISO 15693 and ISO 18000-3 mode 1 compatible • 13.56 MHz ±7k Hz carrier frequency

M24LR64ER

Abstract: 24l64 464-E
Contextual Info: M24LR64E-R 64-Kbit EEPROM with password protection, dual interface & energy harvesting: 400 kHz I²C bus & ISO 15693 RF protocol at 13.56 MHz Datasheet - production data Contactless interface • ISO 15693 and ISO 18000-3 mode 1 compatible • 13.56 MHz ± 7 kHz carrier frequency

ISO 14443-4 pcb

Abstract: 14443-4 compliant IC CRC-16-CCITT CRC-16 ccitt CRC16-CCITT 14443-4 14443-4 command ISO 14443-4 ISO 14443-4 code 7816-6 AM1
Contextual Info: 19-5528; Rev 0; 1/11 KIT ATION EVALU E L B A AVAIL ISO/IEC 14443 Type B-Compliant 64-Bit UID The MAX66000 combines a 64-bit unique identifier UID and a 13.56MHz RF interface (ISO/IEC 14443 Type B, Parts 2-4) in a single chip. The UID can be read through the block transmission protocol (ISO/IEC

NXP 13.567 antenna

Abstract: SL2S5002FTB sot1122 SL2S5002 sot112 Icode antenna design
Contextual Info: SL2S5002; SL2S5102 ICODE SLIX-L Rev. 3.3 — 19 January 2011 198432 Product short data sheet PUBLIC 1. General description The ICODE SLIX-L IC is a dedicated chip for smart label applications with the need for a leaner custom-specific command set, smaller memory and/or a product which takes care

NXP PN544

Abstract: PN544 NXP PN544 NFC nfc PN544 PN544 nfc PN544 nxp nfc PN544 application note difference between ICODE SLI and ICODE SLIX NXP PN544 RF SL2S2002
Contextual Info: AN2022 NXP Type ICODE Tag Operation Rev. 0.11 — 20 January 2011 Application note Document information Info Content Keywords NFC Forum, NFC Forum data mapping, ICODE SLI, ICODE SLI-S, ICODE SLI-L, ICODE SLIX, ICODE SLIX-S, ICODE SLIX-L, ISO-15693 Abstract

SECS II wafer map format

Abstract: C075EE UV-tape
Contextual Info: SL2 ICS50 Wafer addendum Rev. 3.0 — 21 March 2007 Product data sheet 136530 PUBLIC 1. General description This specification describes the electrical, physical and dimensional properties of Au-bumped sawn wafers on FFC of I•CODE SLI-L Label ICs on an NXP C075EE process

LB-412

Abstract: ICODE SLI ICS20 SL2ICS20 IBIS wafer map format
Contextual Info: INTEGRATED CIRCUITS ADDENDUM SL2 ICS 20 I?CODE SLI Label IC Bumped Wafer Specification Product Specification Revision 3.0 Public Philips Semiconductors December 2002 Philips Semiconductors Product Specification Rev.3.0 December 2002 Bumped Wafer Specification

Contextual Info: MLX90129 13.56MHZ SENSOR TAG / DATALOGGER IC Features and Benefits Application Examples Versatile A/D interface for resistive sensors ISO-15693 13.56MHz transponder Slave / Master SPI interface 4 k-bit EEPROM with access protection Standalone data-logging mode

EM4033

Contextual Info: EM MICROELECTRONIC - MARIN SA EM4033 64 bit Read Only ISO15693 Standard Compliant Contactless Identification Device General Description Features The EM4033 is a 64 bit Read Only CMOS integrated circuit intended for use in passive long-range applications. The IC

EM4233SLIC

Abstract: EM4233
Contextual Info: EM MICROELECTRONIC - MARIN SA EM4233SLIC 1k bit Read/Write ISO15693 Standard Compliant Smart Contactless Device General Description Features The EM4233SLIC is a long range passive CMOS integrated circuit intended for use in applications requiring a contactless read/write memory offering unsurpassed read

3491H

Contextual Info: LRI2K 2048-bit EEPROM tag IC at 13.56 MHz, with 64-bit UID and kill code, ISO 15693 and ISO 18000-3 Mode 1 compliant Features • ISO 15693 standard fully compliant ■ ISO 18000-3 Mode 1 standard fully compliant ■ 13.56 MHz ±7 kHz carrier frequency ■