A good PCB layout for the TS954IPT involves keeping the input and output tracks as short as possible, using a solid ground plane, and placing decoupling capacitors close to the device. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
The TS954IPT requires a single 3.3V power supply, and it's recommended to use a low-dropout regulator (LDO) to power the device. The power sequencing requirement is to power up the device after the input voltage has reached 2.5V, and to power down the device before the input voltage drops below 2.5V.
The TS954IPT can support data rates up to 3.2 Gbps, making it suitable for high-speed applications such as HDMI and DisplayPort.
The TS954IPT can be configured for different video modes and resolutions using the I2C interface. The device has a set of registers that can be programmed to select the desired video mode, resolution, and other parameters. The STMicroelectronics documentation provides detailed information on how to configure the device for different video modes.
The TS954IPT has a maximum junction temperature of 125°C, and it's recommended to keep the device temperature below 85°C for optimal performance and reliability. A thermal pad is provided on the device for heat dissipation, and it's recommended to use a thermal interface material (TIM) to improve heat transfer.
TS954IPT datasheet
by STMicroelectronics
