The maximum input voltage that can be applied to the TPS73101DBVRG4 is 12V, but it's recommended to keep it below 10V for optimal performance and to prevent damage to the device.
To ensure stability of the output voltage, it's recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the input capacitance should be at least 1uF and the input voltage should be well-regulated.
The maximum output current that the TPS73101DBVRG4 can provide is 150mA. However, it's recommended to keep the output current below 100mA for optimal performance and to prevent overheating.
The enable pin (EN) is an active-high input that enables or disables the regulator. To enable the regulator, connect the EN pin to a logic high signal (typically VCC or VIN). To disable the regulator, connect the EN pin to a logic low signal (typically GND).
The thermal shutdown temperature of the TPS73101DBVRG4 is typically around 150°C to 160°C. When the junction temperature exceeds this threshold, the regulator will shut down to prevent damage.
TPS73101DBVRG4 datasheet
by Texas Instruments
