Texas Instruments recommends a star-ground layout, with the op-amp's ground pin connected to a central ground point. Additionally, it's recommended to place the op-amp close to the signal source and to use short, direct traces to minimize noise and parasitic capacitance.
The thermal shutdown feature is designed to protect the device from overheating. If the device exceeds the maximum junction temperature (150°C), it will shut down. To handle this, ensure proper heat sinking, avoid high-power dissipation, and monitor the device's temperature using the thermal shutdown indicator pin (TSD).
Texas Instruments recommends using input capacitance (Ci) between 10pF to 100pF and output capacitance (Co) between 10pF to 100nF to ensure stability and optimal performance.
To minimize noise and EMI, use a low-noise power supply, decouple the power pins with capacitors, use shielded cables, and keep the op-amp away from high-frequency sources. Additionally, consider using a ferrite bead or common-mode choke to filter out high-frequency noise.
The maximum allowed voltage difference between the input pins (VIN+ and VIN-) is ±1.5V to prevent latch-up and ensure reliable operation.