TLE2021ACD datasheet by Texas Instruments

TLE2021ACD Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the TLE2021ACD?
  The recommended operating voltage range for the TLE2021ACD is 4.5V to 16V, although it can operate up to 18V with reduced performance.
• How do I ensure the TLE2021ACD is properly biased for optimal performance?
  To ensure proper biasing, connect the VCC pin to a stable voltage source, and decouple it with a 0.1uF capacitor to ground. Also, connect the VREF pin to a stable voltage reference or to VCC through a resistor divider.
• What is the maximum input voltage that can be applied to the TLE2021ACD without damaging the device?
  The maximum input voltage that can be applied to the TLE2021ACD without damaging the device is 18V. Exceeding this voltage may cause permanent damage to the device.
• How do I handle the output voltage swing of the TLE2021ACD when driving a load?
  The output voltage swing of the TLE2021ACD is dependent on the load impedance. To ensure proper output voltage swing, use a load impedance of at least 2kΩ and consider adding an output buffer or voltage follower if the load impedance is low.
• What is the thermal shutdown temperature of the TLE2021ACD?
  The thermal shutdown temperature of the TLE2021ACD is typically around 150°C. If the device temperature exceeds this value, it will shut down to prevent damage.