The maximum operating temperature range for TLC27L2ACDR is -40°C to 125°C.
To ensure stability, ensure that the gain is set to a minimum of 2, and the output impedance is less than 1 kΩ. Also, use a bypass capacitor between the supply pins to reduce noise.
Use a 0.1 μF ceramic capacitor between the supply pins (VCC and GND) and a 10 μF electrolytic capacitor in parallel to ensure proper decoupling.
While TLC27L2ACDR can be used as a comparator, it's not recommended due to its op-amp architecture. Instead, use a dedicated comparator like the LM339 or LM393 for better performance.
Use a low-pass filter at the input, keep the circuit layout clean and compact, and use shielding to reduce electromagnetic interference (EMI). Also, consider using a noise-reducing capacitor between the input pins.
TLC27L2ACDR datasheet
by Texas Instruments
