TL082IDG4 datasheet by Texas Instruments

TL082IDG4 Frequently Asked Questions (FAQs)

• What is the maximum power supply voltage that I can use with the TL082IDG4?
  The maximum power supply voltage for the TL082IDG4 is ±18V. Exceeding this voltage can cause damage to the device.
• Can I use the TL082IDG4 in a single-supply configuration?
  Yes, the TL082IDG4 can be used in a single-supply configuration, but the input common-mode voltage range is limited to within 3V of the positive supply rail. Additionally, the output voltage swing will be reduced.
• What is the minimum operating temperature for the TL082IDG4?
  The minimum operating temperature for the TL082IDG4 is -40°C. However, the device's performance may degrade at temperatures below -20°C.
• Can I use the TL082IDG4 in a high-frequency application?
  The TL082IDG4 has a bandwidth of 3MHz, making it suitable for low-to-moderate frequency applications. For high-frequency applications, a more specialized op-amp with a higher bandwidth may be required.
• How do I layout the PCB to minimize noise and oscillations when using the TL082IDG4?
  To minimize noise and oscillations, keep the input and output traces short and away from each other, use a solid ground plane, and decouple the power supply pins with capacitors. Additionally, consider using a shielded enclosure and minimizing the use of long wires.