SN74LVTH162374DL datasheet by Texas Instruments

SN74LVTH162374DL Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the SN74LVTH162374DL?
  The recommended operating voltage range for the SN74LVTH162374DL is 2.3V to 3.6V, with a typical voltage of 3.3V.
• How do I ensure signal integrity when using the SN74LVTH162374DL in a high-speed application?
  To ensure signal integrity, use a low-impedance PCB design, keep signal traces short and away from noise sources, and use termination resistors as needed. Additionally, consider using a signal integrity analysis tool to simulate and optimize your design.
• Can I use the SN74LVTH162374DL in a 5V system?
  While the SN74LVTH162374DL is designed for 3.3V operation, it can tolerate 5V inputs with some limitations. However, it's not recommended to operate the device at 5V continuously, as it may exceed the maximum rating and reduce the device's lifespan.
• How do I handle power sequencing when using the SN74LVTH162374DL in a system with multiple power domains?
  To ensure proper operation, power up the VCC pin before applying any input signals, and power down the VCC pin after all input signals have been removed. Additionally, consider using a power sequencing controller or a reset controller to manage power-up and power-down sequences.
• What is the maximum clock frequency supported by the SN74LVTH162374DL?
  The maximum clock frequency supported by the SN74LVTH162374DL is 100 MHz, but this can vary depending on the specific application and operating conditions. Consult the datasheet and application notes for more information.