LT3080 - IC VREG 0 V-36 V ADJUSTABLE POSITIVE LDO REGULATOR, 0.5 V DROPOUT, PDSO8, 3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-1, DFN-8, Adjustable Positive Single Output LDO Regulator
The maximum input voltage that can be applied to the LT3080EDD-1#TRPBF is 40V. Exceeding this voltage can cause damage to the device.
To ensure stability in the LT3080EDD-1#TRPBF output voltage, it is recommended to use a minimum output capacitance of 10uF and a maximum ESR of 1 ohm. Additionally, the output voltage should be decoupled from the input voltage using a capacitor with a value of at least 1uF.
The maximum output current that the LT3080EDD-1#TRPBF can deliver is 1.1A. However, the output current should be limited to 1A for reliable operation.
The output voltage of the LT3080EDD-1#TRPBF can be adjusted by connecting a resistor divider network between the output pin and the adjust pin. The output voltage is determined by the ratio of the resistors in the divider network.
The thermal shutdown temperature of the LT3080EDD-1#TRPBF is 150°C. The device will shut down if the junction temperature exceeds this value.
LT3080EDD-1#TRPBF datasheet
by Linear Technology
