-
The maximum clock frequency of the FT812Q-R is 30 MHz.
-
Yes, the FT812Q-R is 5V tolerant, but it is recommended to use a level shifter or voltage divider to ensure reliable operation.
-
The FT812Q-R can be configured for I2C or SPI mode by setting the MODE pin high or low, respectively, during power-up or reset.
-
The maximum data transfer rate of the FT812Q-R is 30 Mbps in SPI mode and 400 kHz in I2C mode.
-
Yes, the FT812Q-R supports hot-swapping, but it is recommended to use a power-on reset circuit to ensure reliable operation.
