The FT811Q-R can support clock frequencies up to 60 MHz.
Yes, the FT811Q-R is 5V tolerant, but it is recommended to use a 3.3V power supply for optimal performance.
To configure the FT811Q-R for I2C mode, set the MODE pin high and the CLKDIV pin low. Additionally, ensure that the I2C clock frequency is within the recommended range of 100 kHz to 400 kHz.
The FT811Q-R can transfer data at a maximum rate of 8 Mbps in I2C mode and 30 Mbps in SPI mode.
Yes, the FT811Q-R can be used in a multi-master I2C bus configuration, but it requires additional external circuitry to handle arbitration and collision detection.
