The CD74HC85M can handle clock frequencies up to 10 MHz.
The CD74HC85M requires a single 2V to 6V power supply, and it's recommended to use a decoupling capacitor of 0.1uF to 1uF between VCC and GND to ensure proper power supply decoupling.
The propagation delay of the CD74HC85M is typically around 10ns to 20ns, depending on the operating voltage and temperature.
Yes, the CD74HC85M can operate at 3.3V, but the input voltage thresholds may vary, and the output voltage levels may not be compatible with 3.3V logic levels.
The asynchronous reset input (R) should be tied to VCC through a pull-up resistor (e.g., 1kΩ) to ensure proper reset operation. A low level on the R input resets the counter.
