XP Power recommends a PCB layout with a large copper area connected to the module's thermal pad to dissipate heat efficiently. A minimum of 1 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
Yes, the ACM12US05 is designed to withstand vibrations up to 10G peak acceleration, 10-2000 Hz frequency range, and 1.5 mm peak-to-peak amplitude. However, it's recommended to consult with XP Power's application engineers for specific vibration requirements.
To ensure EMC, XP Power recommends following the module's layout and grounding guidelines, using a metal enclosure, and adding EMI filters or shielding if necessary. Additionally, the system should be designed to meet the relevant EMC standards, such as EN 55022 and EN 55024.
The maximum allowable capacitance for the output filter is 10 μF. Exceeding this value may affect the module's stability and performance.
Yes, the ACM12US05 can be used in a redundant or parallel configuration, but it's essential to consult with XP Power's application engineers to ensure proper design and implementation.