Texas Instruments recommends a 2-layer PCB with a thermal pad on the bottom layer connected to a large copper area to dissipate heat. A minimum of 1 oz copper thickness is recommended.
Ensure proper heat sinking, use a thermal interface material (TIM) between the device and heat sink, and follow the recommended operating temperature range (-40°C to 125°C).
The maximum allowed voltage on the input pins is 5.5V, which is the absolute maximum rating. Operating the device at this voltage may reduce its lifespan.
The 5962-8765801PA is not specifically designed for radiation-hardened applications. However, Texas Instruments offers radiation-hardened versions of similar devices. Contact TI for more information.
Check the input voltage, output load, and PCB layout for any issues. Verify that the device is properly configured and that the output voltage is within the specified range. Consult the datasheet and application notes for more information.