1999 - MIL-PRF-19500
Abstract: 2N4033 2N3055 2N5038 JANS 2n2222au MIL-PRF-19500/336 MIL-PRF-19500/2n7588 MIL-PRF-19500/391 mil-prf-19500/JANTXV2N6341 2N5415
Text: New England Semiconductor Announces Its Certified Mil-Prf- 19500 JANS Program. JANS Qualification Lots In Process (By Family) Mil-Prf- 19500 /251 -2N2219 Mil-Prf- 19500 /251 -2N2219A Mil-Prf- 19500 /251 -2N2219AL Mil-Prf- 19500 /255 -2N2222A Mil-Prf- 19500 /255 -2N2222AUA Mil-Prf- 19500 /255 -2N2222AUB Mil-Prf- 19500 /290 -2N2905 Mil-Prf- 19500 /290 -2N2905A Mil-Prf- 19500 /290 -2N2905AL Mil-Prf- 19500 /291 -2N2907A Mil-Prf- 19500 /291 -2N2907AUA Mil-Prf- 19500 /291 -2N2907AUB Mil-Prf- 19500 /391 -2N3019/S Mil-Prf- 19500 /366 -2N3501
|
Original
|
PDF
|
Mil-Prf-19500
Mil-Prf-19500/251
-2N2219
-2N2219A
-2N2219AL
Mil-Prf-19500/255
-2N2222A
2N4033
2N3055
2N5038 JANS
2n2222au
MIL-PRF-19500/336
MIL-PRF-19500/2n7588
MIL-PRF-19500/391
mil-prf-19500/JANTXV2N6341
2N5415
|
2011 - IRHC7260SE
Abstract: JANKCAR2N7389
Text: requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-19500. , for each device type as specified in MIL-PRF-19500. * 1.2 Physical dimensions. See figures 1 through , document and MIL-PRF-19500. 3.2 Qualification. Devices furnished under this specification shall be , MIL-PRF-19500. * 3.4 Interface and physical dimensions. The interface and physical dimensions shall be as , accordance with MIL-PRF-19500. At the option of the manufacturer, marking may be omitted from the body, but
|
Original
|
PDF
|
MIL-PRF-19500/657B
MIL-PRF-19500/657A
MIL-PRF-19500.
IRHC7260SE
JANKCAR2N7389
|
2N7509
Abstract: transistor 1020 2N7510 FSGJ264 FSGJ160
Text: consist of this specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers , as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1, (TO-254). * 1.3 Maximum , acquisition document (see 6.2). 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.6 , . Qualification inspection shall be in accordance with MIL-PRF-19500. Alternate flow is allowed for qualification inspection in accordance with MIL-PRF-19500. 4.2.1 Group E qualification. Group E inspection shall be
|
Original
|
PDF
|
MIL-PRF-19500/687B
MIL-PRF-19500/687A
2N7509,
2N7510,
2N7511,
MIL-PRF-19500.
2N7509
transistor 1020
2N7510
FSGJ264
FSGJ160
|
jx4938
Abstract: 1N3070 1N3070 JANTX J493 1N4938 1N4938-1 1N4938UR-1 DO-213AA 1N3070-1 1N3070UR-1
Text: requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-19500. , levels are provided for die, as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figures 1 (DO , herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. Interface and , plug construction in accordance with the requirements of MIL-PRF-19500. All glass diodes shall be , in accordance with MIL-PRF-19500. Manufacturer's identification and date code shall be marked on the
|
Original
|
PDF
|
MIL-PRF-19500/169N
MIL-PRF-19500/169M
1N3070,
1N3070-1,
1N3070UR-1,
1N4938,
1N4938-1,
1N4938UR-1,
jx4938
1N3070
1N3070 JANTX
J493
1N4938
1N4938-1
1N4938UR-1
DO-213AA
1N3070-1
1N3070UR-1
|
2n3792 equivalent
Abstract: 2N3791 equivalent 2N3792 2N3791 2N7369 379h 2N3792 JANTX
Text: product described herein shall consist of this specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 , . Four levels of product assurance are provided for each device type as specified in MIL-PRF-19500. 1.2 , . Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. 3.4 Interface and , , MIL-STD-750, and herein (see 6.2). 3.5 Marking. Devices shall be marked as specified in MIL-PRF-19500. , and II). 4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500.
|
Original
|
PDF
|
MIL-PRF-19500/379H
MIL-PRF-19500/379G
2N3791
2N3792,
MIL-PRF-19500.
2n3792 equivalent
2N3791 equivalent
2N3792
2N7369
379h
2N3792 JANTX
|
1n7058ccu3
Abstract: 1n7058 JAN1N7058CCU3 1n7038 30CLJQ150 30LJQ150 JAN1N7038U3 30CLJCQ150
Text: specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance , device type as specified in MIL-PRF-19500. * 1.2 Physical dimensions. See figure 1, U3 and U3C (with , definitions. Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. 3.4 , accordance with MIL-PRF-19500. 4.4.1 Group A inspection. Group A inspection shall be conducted in accordance , herein. * 4.4.2.1 Group B inspection, table E-VIa (JANS) of MIL-PRF-19500. Subgroup Method
|
Original
|
PDF
|
MIL-PRF-19500/731A
MIL-PRF-19500/731
1N7058CCU3,
1N7058CCU3C,
1N7038U3,
MIL-PRF-19500.
1n7058ccu3
1n7058
JAN1N7058CCU3
1n7038
30CLJQ150
30LJQ150
JAN1N7038U3
30CLJCQ150
|
621C
Abstract: K 3053 TRANSISTOR 2N7369 2N3792 621c11 TL 431 transistor 2N2792
Text: provided as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1 (TO-254). 1.3 Maximum , definitions used herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. The , table E-IV, screen 14, of MIL-PRF-19500. 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. , shall be in accordance with MIL-PRF-19500. 4.2.1 Group E qualification. Group E inspection shall be , specified for subgroup testing in tables E-VIa and E-VIb of MIL-PRF-19500. Electrical measurements
|
Original
|
PDF
|
MIL-PRF-19500/621C
MIL-PRF-19500/621B
2N7369,
MIL-PRF-19500.
O-254)
621C
K 3053 TRANSISTOR
2N7369
2N3792
621c11
TL 431 transistor
2N2792
|
2N6804
Abstract: 2N6806 IRF9130 IRF9131 IRF9132 IRF9133 2n6806 jantx MIL-PRF-19500/558D
Text: specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance , MIL-PRF-19500. 3.6 Electrical performance characteristics. Unless otherwise specified, the electrical , MIL-PRF-19500. * 4.2.2 Group E qualification. Group E inspection shall be performed for qualification or , qualification. 4.2.2 JANHC and JANKC die. Qualification shall be in accordance with MIL-PRF-19500. 8 , MIL-PRF-19500. As a minimum, die shall be 100-percent probed in accordance with table I, subgroup 2
|
Original
|
PDF
|
MIL-PRF-19500/562E
MIL-PRF-19500/562D
2N6804
2N6806
MIL-PRF-19500.
2N6806
IRF9130
IRF9131
IRF9132
IRF9133
2n6806 jantx
MIL-PRF-19500/558D
|
2N7373
Abstract: 2N7373 transistor 2N5004
Text: applications. Four levels of product assurance are provided as specified in MIL-PRF-19500. 1.2 Physical , . Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. 3.4 Interface , 100 percent hermetic seal in accordance with appendix E, table IV, screen 14, of MIL-PRF-19500. 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.6 Electrical performance characteristics , . Qualification inspection shall be in accordance with MIL-PRF-19500. 4.3 Screening ( JANS, JANTX, and JANTXV
|
Original
|
PDF
|
MIL-PRF-19500/613A
MIL-S-19500/613
2N7373,
MIL-PRF-19500.
O-254AA)
2N7373
2N7373 transistor
2N5004
|
1N483B
Abstract: 1N485B 1N486B 1N5194 1N5194UR 1N5195 1N5195UR
Text: herein shall consist of this specification sheet and MIL-PRF-19500. Types 1N483B, 1N485B, 1N486B are , specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1 (DO-7, DO-35), figure 2 (MELF, DO , definitions used herein shall be as specified in MIL-PRF-19500. 2 MIL-PRF- 19500 /118J w/AMENDMENT 1 , with the requirements of MIL-PRF-19500. All glass diodes shall be designed with sufficient thermal , be in accordance with MIL-PRF-19500. Manufacturer's identification and date code shall be marked on
|
Original
|
PDF
|
MIL-PRF-19500/118J
1N483B,
1N485B,
1N486B,
1N5194,
1N5194UR,
1N5194US,
1N5195,
1N5195UR,
1N483B
1N485B
1N486B
1N5194
1N5194UR
1N5195
1N5195UR
|
2N3716
Abstract: 2N7368 2N3715 C-2688 2N3716 JAN 2N3715 JANTX equivalent jan,tx series semiconductors
Text: product described herein shall consist of this specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 , . Four levels of product assurance are provided for each device type as specified in MIL-PRF-19500. 1.2 , be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. Interface and physical , accordance with MIL-PRF-19500. 3.6 Electrical performance characteristics. Unless otherwise specified herein , . Qualification inspection shall be in accordance with MIL-PRF-19500. 4.2.1 Group E qualification. Group E
|
Original
|
PDF
|
MIL-PRF-19500/408J
MIL-PRF-19500/408H
2N3715
2N3716,
MIL-PRF-19500.
2N3716
2N7368
C-2688
2N3716 JAN
2N3715 JANTX equivalent
jan,tx series semiconductors
|
1N6677-1
Abstract: 1N6677UR-1 110C DO-213AA MIL-PRF19500 1N6677UR MIL-PRF-19500/1N6677-1
Text: specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance , definitions used herein shall be as specified in MIL-PRF-19500. * 3.4 Interface and physical dimensions , be in accordance with MIL-PRF-19500. * 3.5.1 Marking for UR devices. UR-suffix devices only, all , accordance with table II herein and MIL-PRF-19500. 4.2.1 JANHC and JANKC devices. Qualification for JANC devices shall be in accordance with appendix G of MIL-PRF-19500. This testing may be performed on a TO
|
Original
|
PDF
|
MIL-PRF-19500/610E
MIL-PRF-19500/610D
1N6677-1
1N6677UR-1,
MIL-PRF-19500.
1N6677UR-1
110C
DO-213AA
MIL-PRF19500
1N6677UR
MIL-PRF-19500/1N6677-1
|
2N7371
Abstract: 2N6052 equivalent 2N7368 C-2688 c2688 L
Text: product described herein shall consist of this specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 , transistor. Four levels of product assurance are provided as specified in MIL-PRF-19500. 1.2 Physical , , symbols, and definitions used herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical , , screen 14, of MIL-PRF-19500. 3.5 Electrical performance characteristics. Unless otherwise specified , specified in table I. 3.7 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.8 Workmanship
|
Original
|
PDF
|
MIL-PRF-19500/623C
MIL-PRF-19500/623B
2N7371
MIL-PRF-19500.
2N6052 equivalent
2N7368
C-2688
c2688 L
|
2N7575
Abstract: diode cc 3053 operation50 2N7576
Text: sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance requirements , device type as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1 (TO-254AA) 1.3 Maximum , figure 1 (TO-254AA). 3.4.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500. , 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.6 Electrical performance , /738 4.4.2.1 Group B inspection, table E-VIA (JANS) of MIL-PRF-19500. Subgroup Method Condition
|
Original
|
PDF
|
MIL-PRF-19500/738
2N7575,
2N7576,
2N7577,
MIL-PRF-19500.
O-254AA)
2N7575
diode cc 3053
operation50
2N7576
|
|
|
1N6683
Abstract: 1N6685 1N6685US 1N6684 1N6640US
Text: unencapsulated device type die as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1 (D0 , . Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. EC , shall be in accordance with MIL-PRF-19500. 3.5 Polarity. The polarity of all types shall be indicated , Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500. 6 MIL-PRF- 19500 , inspection. Conformance inspection shall be in accordance with MIL-PRF-19500. 4.4.1 Group A inspection
|
Original
|
PDF
|
MIL-PRF-19500/625A
MIL-S-19500/625
1N6683,
1N6684,
1N6685,
1N6683US,
1N6684US,
1N6685US
1N6683
1N6685
1N6685US
1N6684
1N6640US
|
1N6532 equivalent
Abstract: 1N6528 M100UFG JX6528 1n6535 jantxv RM117 1N6531 1N6535 1N6530 1N6532
Text: specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance , are provided for each device as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1 , definitions used herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. The , in MIL-PRF-19500. * 3.5 Marking. Devices shall be marked as specified in MIL-PRF-19500. Manufacturer , accordance with MIL-PRF-19500. 4.4.1 Group A inspection. Group A inspection shall be conducted in accordance
|
Original
|
PDF
|
MIL-PRF-19500/577C
MIL-PRF-19500/577B
1N6528
1N6535,
MIL-PRF-19500.
1N6532 equivalent
M100UFG
JX6528
1n6535 jantxv
RM117
1N6531
1N6535
1N6530
1N6532
|
1N939B-1
Abstract: 1N935B-1 1N939BUR-1 1N940B-1 1N935BUR-1 156n diode 1N937B-1 1N937BUR-1 1N938B-1 1N938BUR-1
Text: herein shall consist ofthis specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This , specified in MIL-PRF-19500. Seven levels of radiation hardened (total dose only) product assurance are provided for each encapsulated device type as specified in MIL-PRF-19500. 1.2 Physical dimensions. See , herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. The interface and , . Shall be as specified in MIL-PRF-19500. 3.5.2 JANS construction. Construction shall be dash-one
|
Original
|
PDF
|
MIL-PRF-19500/156N
MIL-PRF-19500/156M
1N935B-1,
1N937B-1,
1N938B-1,
1N939B-1,
1N940B-1,
1N935BUR-1,
1N937BUR-1,
1N938BUR-1,
1N939B-1
1N935B-1
1N939BUR-1
1N940B-1
1N935BUR-1
156n diode
1N937B-1
1N937BUR-1
1N938B-1
1N938BUR-1
|
1999 - 1N821-1
Abstract: 1N829-1 MIL-PRF-19500 zener diode 1N829-1 JANTX
Text: , and definitions. Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. , . 3.5.1 Dash-one construction. Shall be as specified in MIL-PRF-19500. 3.5.2 JANS construction. Construction shall be dash-one, category I or II metallurgical bond in accordance with MIL-PRF-19500. 3.5.3 , MIL-PRF- 19500 /159K 3.6 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.6.1 Marking of "UR" , with MIL-PRF-19500. 4.2.1 Group E inspection. Group E inspection shall be conducted in accordance with
|
Original
|
PDF
|
MIL-PRF-19500/159K
MIL-PRF-19500/159J
1N821-1,
1N823-1,
1N825-1,
1N827-1,
1N829-1,
1N821UR-1,
1N823UR-1,
1N825UR-1,
1N821-1
1N829-1
MIL-PRF-19500 zener diode
1N829-1 JANTX
|
equivalent diode for 1n457
Abstract: SE 442 1N457 equivalent 1N457 1N458 1N459 Diode Equivalent 1N458 equivalent diode for 1n458
Text: product described herein shall consist of this specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 , product assurance is provided for each device type as specified in MIL-PRF-19500. 1.2 Physical dimensions , herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. Interface and , requirements of MIL-PRF-19500. All glass diodes shall be designed with sufficient thermal compensation in the , /193F 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. Manufacturer's identification and
|
Original
|
PDF
|
MIL-PRF-19500/193F
MIL-PRF-19500/193E
1N457,
1N458,
1N459,
MIL-PRF-19500.
equivalent diode for 1n457
SE 442
1N457 equivalent
1N457
1N458
1N459
Diode Equivalent 1N458
equivalent diode for 1n458
|
JANKCAR2N7389
Abstract: 2N7426 IRHC7360SE JANKCAF2N7389 IRHC9Y130 JANKCAR2N7268 2n7391 2n7425 JANKCAR2N7261 2n7389
Text: die. Two levels of product assurance are provided for each device type as specified in MIL-PRF-19500. , consist of this document and MIL-PRF-19500. 3.2 Qualification. Devices furnished under this , herein shall be as specified in MIL-PRF-19500. 3.4 Interface and physical dimensions. The interface and , accordance with MIL-PRF-19500. At the option of the manufacturer, marking may be omitted from the body, but , INCH-POUND MIL-PRF- 19500 /657A 22 February 2000 SUPERSEDING MIL-PRF- 19500 /657 23 December 1997
|
Original
|
PDF
|
MIL-PRF-19500/657A
MIL-PRF-19500/657
MIL-PRF-19500.
JANKCAR2N7389
2N7426
IRHC7360SE
JANKCAF2N7389
IRHC9Y130
JANKCAR2N7268
2n7391
2n7425
JANKCAR2N7261
2n7389
|
2N7569
Abstract: No abstract text available
Text: specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance , each device type as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1 (TO-3). 1.3 , (see 6.2). 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.6 Electrical performance , ) of MIL-PRF-19500. Subgroup Method Condition B4 1037 For solder die attach: 2,000 , MIL-PRF-19500. Subgroup Method Condition B3 1027 For eutectic die attach: VCB 25 V dc
|
Original
|
PDF
|
MIL-PRF-19500/734
2N7569,
2N7570,
2N7571
MIL-PRF-19500.
2N7569
|
MIL-PRF-195001
Abstract: 1N1614 Diodes 1N1614 1N1614R 1N1615 1N1615R 1N1616 1N1616R 1N4458 1N4458R
Text: specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers the performance , as specified in MIL-PRF-19500. 1.2 Reverse types, (suffix R). Reverse and standard types are , . Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. * 3.4 Interface , . 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. The polarity shall be indicated by a , , appendix E, table E-VIb (JANTX and JANTXV) of MIL-PRF-19500. Subgroup Method Condition B2 4016
|
Original
|
PDF
|
MIL-PRF-19500/162D
MIL-PRF-19500/162C
1N1614,
1N1615,
1N1616,
1N4458,
1N4459,
1N1614R,
1N1615R,
1N1616R,
MIL-PRF-195001
1N1614 Diodes
1N1614
1N1614R
1N1615
1N1615R
1N1616
1N1616R
1N4458
1N4458R
|
2N7405
Abstract: 2N7406 2N7408 on3161
Text: consist of this specification sheet and MIL-PRF-19500. 1. SCOPE 1.1 Scope. This specification covers , specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1, (TO-254). * 1.3 Maximum ratings. TA , requirements shall be as specified in table I. 3.8 Marking. Marking shall be in accordance with MIL-PRF-19500. , . Qualification inspection shall be in accordance with MIL-PRF-19500. Alternate flow is allowed for qualification inspection in accordance with MIL-PRF-19500. 4.2.1 Group E qualification. Group E inspection shall be
|
Original
|
PDF
|
MIL-PRF-19500/634C
MIL-PRF-19500/634B
2N7405,
2N7406,
2N7407,
2N7408,
MIL-PRF-19500.
2N7405
2N7406
2N7408
on3161
|
2n7391
Abstract: 2N7392 2N7444 2N7434
Text: consist of this specification sheet and MIL-PRF-19500. 1. SCOPE * 1.1 Scope. This specification covers , construction is not permitted. 3.5 Marking. Marking shall be in accordance with MIL-PRF-19500. 3.6 , (JANS) of MIL-PRF-19500. Subgroup Method Condition B3 1051 Test condition G, 100 cycles , inspection, table VIb (JANTXV) of MIL-PRF-19500. Method Condition B2 1051 Test condition G, 25 , , VDD 50 V, ID = ID1 1/ For sampling plan, see MIL-PRF-19500. 2/ This test required for the
|
Original
|
PDF
|
MIL-PRF-19500/661C
MIL-PRF-19500/661B
2N7444,
2N7434,
2N7391,
2N7392,
MIL-PRF-19500.
2n7391
2N7392
2N7444
2N7434
|
723a
Abstract: 1N6910 1N6912 1N691 BT 342 project
Text: acquiring the product described herein shall consist of this specification sheet and MIL-PRF-19500. 1 , for each device type as specified in MIL-PRF-19500. 1.2 Physical dimensions. See figure 1. * 1.3 , definitions. Abbreviations, symbols, and definitions used herein shall be as specified in MIL-PRF-19500. 3.4 , MIL-PRF- 19500 ). Metallurgical bond shall be in accordance with the requirements of category II in MIL-PRF-19500. , 4.4 Conformance inspection. Conformance inspection shall be in accordance with MIL-PRF-19500. 4.4.1
|
Original
|
PDF
|
MIL-PRF-19500/723A
MIL-PRF-19500/723
1N6910UTK2,
1N6911UTK2,
1N6912UTK2,
1N6910UTK2CS,
1N6911UTK2CS,
1N6912UTK2CS,
1N6910UTK2AS,
1N6911UTK2AS,
723a
1N6910
1N6912
1N691
BT 342 project
|
