I.431 T1 Search Results

TEW5111

Contextual Info: CEPT/T1 TEW5111 Input Transformer TEW5111 is designed and approved to be used as a receive transformer with the following devices: Complies with ANSI T1.408 and CCITT I.431 for Longitudinal Balance and T1.408, G.703 & BS6328 for Return Loss. MITEL Typical applications are:

4921N

Contextual Info: CEPT /T1 TEW4921 Output Transformer TEW4921 is designed and approved to be used as a transmit transformer with the Mitel MT89760/-60B and MT89790/90B devices in T1 and CEPT applications. Complies with ANSI T1.408 and CCITT I.431., with regards to Longitudinal Balance.

T5683

Abstract: DS2187 PM4341 TEW5281 T-1408
Contextual Info: CEPT /T1 TEW5281 Input Transformer TEW5281 is designed and approved to be used as a Receive Transformer in T1 and CEPT applications with the following devices: Complies with ANSI T1.408 and CCITT I.431 with regards to Longitudinal Balance, and with T1.408, G.703 and BS6328 for

TEW5316

Abstract: 6 pin pulse transformer
Contextual Info: CEPT TEW5316 is designed and approved to be used as a transmit transformer in CEPT applications with the following devices: – TEW5316 Output Transformer STC Typical applications are: TEL5219L Complies with CCITT G.703 and I.431 with regards to Longitudinal Balance, Pulse

TEW5615

Abstract: 5615c
Contextual Info: CEPT TEW5515 is designed and approved to be used, as a transmit transformer in CEPT applications, 75 Ω coaxial line, with the following devices: – STC TEW5615 Output Transformer TEL5219L Complies with CCITT G.703 and I.431 with regards to Longitudinal Balance, Pulse

pic 16F 738

Abstract: tr/diode gi 08d "TOPS" 1N21C
Contextual Info: P r e l i m i n a r y In f o r m a t i o n PM I PMC-Sierra, Inc. I T# 1^^ ISSUE 3 PM 4 3 1 4 Q D S X QUAD T1 IE 1 LINE INTERFACE DE VICE P M 431 4 QDSX QUAD LI NE T1/E1 INTERFACE Pr el i m i nar y DEVICE I nf or m at i on I s s ue 3: M a r c h , 1996 PMC-Sierra, Inc.

Sliding goertzel algorithm C code

Abstract: 431A1 Sliding goertzel algorithm Adaptive Differential Pulse Code Modulation Decoder sliding goertzel 431a1a wavelet transform goertzel GOERTZEL ALGORITHM SOURCE CODE LMS adaptive filter
Contextual Info: ® PCI-431 Series Ultra-Performance, Analog I/O DSP Coprocessor Boards for PCI Bus FEATURES • 320C44 DSP; dual on-board 32-bit busses. • For FFT’s, digital filtering, sonar/radar, robotics, imaging, and spectral analysis. • Up to four, simultaneous, streaming, 12-bit, 10MHz

32C43

Abstract: lg crt monitor circuit diagram BAV14 sl68d P82C431 BA536 D6105 ibm crt monitor circuit diagram crt LG monitor circuit diagram Q355
Contextual Info: Q I I P 5 82C 431/82C 432A /82C 433/82C 434A CS8240: ENHANCED GRAPHICS CHIPSet • 100% hardware and software compatible to IBM™ Enhanced Graphics Adapter card ■ Full 16 color support in 640 x 200 and 320 * 200 pixels for IBM Color Display ■ Supports IBM Color Graphics and Monorhmm g adapters, Slid Hgrcy! $T“ GfaphfOS

Contextual Info: I L C BATA DEVICE CORP b5E D ie j h BUS-65142 AND BUS-65144 ILC DATA DEVICE CORPORATION — 4^7071^ GDafiò^l 431 mi>j>C MIL-STD-1553 DUAL REDUNDANT REMOTE TERMINAL HYBRID FEATURES • Complete Intergrated Remote Ter­ minal Including: - Dual Low-Power Transceivers

AUTOMATIC light dim dip CONTROLLER

Contextual Info: CMOS ST-BUS FAMILY MT9079 Advanced Controller for E1  Features • • • • • • • • • ISSUE 5 Meets applicable requirements of CCITT G.704, G.706, G.732, G.775, G.796, I.431 and ETSI ETS 300 011 HDB3, RZ, NRZ fibre interface and bipolar

intel 4269

Abstract: 458 TIMER CIRCUIT COLLECTION E1 PCM encoder MT9079AL 74hct05 74hct74 motorola 74f74 MT9079AP 74HCT05 national MT8952
Contextual Info: CMOS ST-BUS FAMILY MT9079 Advanced Controller for E1  Features • • • • • • • • • ISSUE 2 Meets applicable requirements of CCITT G.704, G.706, G.732, G.775, G.796, I.431 and ETSI ETS 300 011 HDB3, RZ, NRZ fibre interface and bipolar

HDB3 coaxial link

Abstract: HDB3 T7288 LUCENT 7288 el T7288-EL T7288-PL TTL catalog E1 HDB3 hdb3 alarm AMI encoding
Contextual Info: Data Sheet January 1998 T7288 CEPT/E1 Line Interface Features • Fully integrated 2.048 Mbits/s line interface ■ Intended for use in systems that must comply with ITU-T specifications G.703, G.823, I.431, G.732, G.735—G.739 ■ Pin-selectable 75 Ω or 120 Ω operation

BT806

Abstract: i.431 T1 BT8069B 61535 CS61534 TEW4977 TEW4977-2 TEW4977-3 transformer 120 12 output transformer
Contextual Info: CEPT/T1 TEW4977 Input/Output Transformer TEW4977 & -1 are designed and approved to be used as an Input transformer with the following devices. Fully encapsulated in epoxy. Typical applications are: CS61534, 61535, 61574, 6158, 61535A, 61574A, 61575, 6158A.

MT89790B

Abstract: TEW5716
Contextual Info: CEPT/T1 TEW5716 Output Transformer Applications: TEW5716 is designed to be used, as a transmit transformer in the ISDN primary rate access network interfacing the Mitel MT89760/60B and MT89790/90B devices. TEW5716-4 is designed for MT89790B when operating from

TEW5043

Abstract: TEW5767 TEW5767-1
Contextual Info: T1/CEPT TEW5767 High Voltage Isolation Transformer TEW5767 is specifically designed to be used as a high voltage isolationtransformer in T1 and CEPT applications. The Return Loss exceeds the requirements of CCITT G.703. The Longitudinal balance exceeds the requirements of

MT89790B

Abstract: TEW5433
Contextual Info: CEPT/T1 TEW5433 is designed to be used, as a transmit transformer in the ISDN primary rate access network for, Mitel TEW5433 Output Transformer MT89760/60B MT98790/90B TEW5433-4 is designed for, MT89790B when operating from a single 5 V dc source. Applications:

PEB2236

Abstract: 431 at PEB2235 STLC5432 TEW5376 TEW5376-1 TEW5376-2 TEW5376-3
Contextual Info: CEPT/T1 TEW5376 is designed to be used either as a transmit or as a receive transformer in the ISDN primary rate access network, for the following devices. Siemens SGS-THOMSON TEW5376 Input/Output Transformer When in transmit mode, connect the two primary windings in

431.g

Abstract: PEB2235 PEB2236 TEW4994 TEW4994-1 TEW4994-2 TEW4994-3 5 pin pulse transformer
Contextual Info: CEPT /T1 TEW 4994 input/output Transformer windings in series, pin 5 to pin 2, thus forming a center tap at pin 5/2. TEW4994 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing SIEMENS PEB2235 and PEB2236 to a 75, 100 or 120 ohm

center tap pulse transformer

Abstract: PEB2235 PEB2236 TEW4980 TEW4980-1
Contextual Info: CEPT/T1 TEW4980 In/Output Transformer TEW4980 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing SIEMENS PEB2235 and PEB2236 to a 75, 100 or 120 ohm line. Typical applications are: When in transmit mode, connect the two primary

PEB2235

Abstract: TEW5315 6 pin pulse transformer
Contextual Info: CEPT/T1 TEW5315 In/Output Transformer When in receive mode, connect the two primary windings in series, pin 6 to pin 4, thus forming a center tap at pin 6/4. TEW5315 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing the

diode 4000v

Abstract: MT89760B TEW4922 TEW4922-1
Contextual Info: CEPT/T1 TEW4922 Input Transformer TEW4922 is designed and approved to be used as a receive transformer with MITEL MT89760/-60B and MT89790/-90B devices. Typical applications are: • Primary rate ISDN network nodes. • PBX or computer to T1/CEPT Digital Trunks.

PEB2235

Abstract: PEB2236 TEW5736
Contextual Info: CEPT/T1 TEW5736 Input/Output Transformer TEW5736 is designed to be used, either as a transmit or as a receive transformer in the ISDN primary rate access network, interfacing the Siemens PEB2235 and PEB2236 devices When in receive mode, connect the two primary windings in seriesp, pin 5 to pin 3.

431.G

Abstract: 431 g MT89790
Contextual Info: CEPT/T1 4922-X Input Transformer 4922-X is designed and approved to be used as a receive transformer with MITEL MT89760/-60B and MT89790/-90B devices. Typical applications are: • Primary rate ISDN network nodes. • PBX or computer to T1/CEPT Digital Trunks.

Contextual Info: CEPT/T1 TEW4922 Input Transformer TEW4922 is designed and approved to be used as a receive transformer with MITEL MT89760/-60B and MT89790/-90B devices. Typical applications are: • Primary rate ISDN network nodes. • PBX or computer to T1/CEPT Digital Trunks.