K0RE9418 PD78F9418 - Datasheet Archive

 

K0RE9418 Development Board Product Overview The K0RE9418 development board is a low-cost ($39) and easy way to begin evaluating

 

K0RE Family K0RE9418 K0RE9418 Development Board Product Overview The K0RE9418 K0RE9418 development board is a low-cost ($39) and easy way to begin evaluating the integrated features of the µPD78F9418 PD78F9418, a member of NEC Electronics' K0S 8-bit microcontroller family. This device is an excellent embedded microcontroller for portable human interface applications. µPD78F9418 PD78F9418 Features · 32 KB of flash memory · 28 x 4 multi-mode LCD controller/ driver · Seven-channel 10-bit resolution A/D converter · Watchdog timer · Real-time clock · 1.8 to 5.5 volt operation The K0RE9418 K0RE9418 board adds the basic required external components to provide an operating platform from which to build a prototype system. It also provides a means of immediately starting a design by enabling the products' I/O pins to be attached to the microcontroller's peripherals. For prototyping, all device pins are brought out to convenient 0.1-inch center thru-holes that surround the package. K0RE9418 K0RE9418 Board Features For flash programming, we recommend the low cost ($149) K0REWriter II. Evaluations versions of a C compiler, assembler and simulator with virtual hardware support are available for downloading from the development tools section of NEC Electronics America's web site. · µPD78F9418 PD78F9418 32 KB flash microcontroller · 4.91 MHz crystal · 32 kHz sub-oscillator crystal · Reset switch · Power-on reset IC · LCD bias resistors · 10-pin flash programming connector Block Diagram K0RE9418 K0RE9418 Development Board The information in this document is current as of October 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such NEC Electronics products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC Electronics no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact NEC Electronics sales representative in advance to determine NEC Electronics`s willingness to support a given application. (Note) (1) " NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) " NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). To find out more about the products and services available from NEC Electronics America, call 1-800-366-9782 or visit our web site at www.necelam.com Printed in U.S.A. Document No. 50959