ADB0407 - Datasheet Archive

 

OCS - 1000 SERIES The RS switch joystick is the ideal choice for single step switching applications, where a compact, robust

 

MICROSWITCH JOYSTICK - STOCK NO. 479-1570 OCS - 1000 SERIES The RS switch joystick is the ideal choice for single step switching applications, where a compact, robust joystick is required. Supplied with a new, comfortable knob and improved construction the joystick is designed for sub panel mounting via the use of the 4 x M2.5 screws supplied. The operating mode of the joystick is defined by the use of the supplied limiter plates. Selection of the required limiter will enable single axis, dual axes, cross or diagonal operation. The joystick is supplied with industry standard V4 micro-switches, configured with changeover contacts carrying a nominal 5A/250V AV rating. All switches have gold flash terminals to ensure reliable switching at very low current levels. DIMENSIONS T ECHNICAL SPECIFICATION Switch type V4 Number of switches 4 Nominal current 5 Amp Maximum voltage 250V AC Contacts Changeover - gold Termination Solder Contact life Load dependent Temperature range -20 to +50C Environmental IP65 (above panel) Mechanical life >5 million cycles Lever travel +/- 12 degrees from centre. (nom) Lever material Stainless steel Lever diameter 4mm nominal Body material Mineral filled nylon-6 Knob material Nylon Gaiter material Vinyl Mounting 4 X M2.5x20mm Stainless www.rswww.com The Company reserves the right to change specification without notice. ADB0407 ADB0407 Doc no. 801009-v1