Download

PDF Abstract Text:

A Guide to Building a PC with an AMD Athlon Processor

22914B / 0-September 1999

A Guide to Building a PC with an AMD Athlon Processor
22914B / 0-September 1999
Step 16.
Check Alignment of the Motherboard with the Standoff Holes
Position the motherboard in the case so you can see the alignment of the mounting holes in the motherboard with the standoffs. Verify that you can install the motherboard in the case with the processor module on it. Some cases have power supplies or other components that block the installation of the motherboard after the processor module is installed. Note: It is best to install the processor module in the motherboard before you install the motherboard in the case. Unfortunately this is not possible with some cases. If you can install your motherboard in the case with the processor module on it, continue with the next step. Otherwise, install the motherboard in the case before going to the next step. When you are installing the processor module outside the case, use an anti-static mat or other soft surface under the motherboard.
Photo 27. Check Alignment of the Motherboard with Standoff Holes