Download

PDF Abstract Text:

PIERCING SPLICE

Wire-to-wire splices

PIERCING SPLICE
Wire-to-wire splices
Model No. PSL-40
Applicable wire(reference) Total cross sectional area(mm2)
0.6 to 1.0
Finish
- Tin-plated -
Dimension L Thickness mm(in.) mm(in.)
This splice, like the SPC terminal, has special channels inside its crimp areas so that insulation-coated windings (magnet wire like enamel-coated wire, etc.) can be electrically connected without removing the insulation coating. It is suited for connections between the windings of motors, relays and other rotating devices, and the connections between the windings and the leads of such devices.
PSL-40T PSL-60 PSL-60T PSL-80 PSL-80T
0.7 to 1.8
Tin-plated -
1.5 to 3.5
Tin-plated
Material
Brass
Note: 1. The applicable wire size (total sectional area) above serves as a basic guideline. Before use, the performance of this connector must be tested with the wire that is to be used. 2. Do not use this connector to connect more than two magnet wires (enamel-coated wires, etc.).