CARD-E09A Evaluation Hardware Manual (English) SEIKO EPSON C

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

CARD-E09A Evaluation Hardware Manual (English) SEIKO EPSON C

Datasheet Thumbnail

Top Searches for this datasheet

MF1202-01a
CARD-E09A
Evaluation Hardware Manual (English)
SEIKO EPSON CORPORATION
CARD-E09A Evaluation Hardware Manual
ENERGY SAVING EPSON
EPSON offers effective savings customers through wide range electronic devices, such semiconductors, liquid crystal display (LCD) modules, crystal devices. These savings achieved through sophisticated melding three different efficiency technologies. Power saving technology provides power consumption voltages. Space saving technology provides further reductions product size weight through super-precise processing high-density assembly technology. Time saving technology shortens time required design development customer side shortens delivery times.
concept Energy Saving technology conserves resources blending essence these three efficiency technologies. essence these technologies represented each products that provide customers. industrial sector, leading priorities include measures counter greenhouse effect reducing measures preserve global environment, development energy-efficient products. Environmental problems global concern, although contribution energy saving technology developed EPSON appear insignificant, seek contribute development energy-saving products customers through utilization
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual (English)
Evaluation Board(SCE88J1B01) Hardware Manual Board (SCE88J2B01) Hardware Manual
EPSON
Rev.A
CARD-E09A
Evaluation Hardware Manual (English)
NOTICE: part this material reproduced duplicated form means without written permission Seiko Epson. Seiko Epson reserves right make changes this material without notice. Seiko Epson does assume liability kind arising inaccuracies contained this material application product circuit and, further, there representation that this material applicable products requiring high level reliability, such medical products. Moreover, license intellectual property rights granted implication otherwise, there representation warranty that anything made accordance with this material will free from patent copyright infringement third party. This material portions thereof contain technology subject relating strategic products under control Foreign Exchange Foreign Trade Control Japan require export license from Ministry International Trade Industry other approval from anther government agency. ©SEIKO EPSON CORPORATION 1999 rights reserved. CompactFlashis trademark Sandisk Corporation. CompactFlashis licensed (CompactFlash Association).PS/2 registered trademark International Business Machines Corporation.ETHERNET registered trademark Xerox limited. other product names mentioned herein trademarks and/or registered trademarks their respective companies.
CARD-E09A Evaluation Board
(SCE88J1B01)
Hardware Manual
CARD-E09A Evaluation Hardware Manual
Contents
1.CAUTIONS 2.OUTLINE. 2.1.Features 2.2.Block Diagram. 2.3.Appearance Connector Layout 3.PIN ASSIGNMENT 3.1.CARD-E09A Connectors. 3.2.PCMCIA Slots 3.3.ISH Extension Bus. 3.4.LCD Connector 3.5.CRT Display Connector 3.6.Mouse Keyboard Interface 3.7.Parallel Port Interface. 3.8.Serial Port Interface. 3.9.Miscellaneous Interface. 3.10.10BASE-T Interface. 3.11.Touch Panel Connector 3.12.Speaker Connectors. 3.13.PROM Socket 3.14.Backup Battery 3.15.LEDS. 3.16.Suspend/Resume Switch 3.17.Manual Reset Switch. 3.18.Power-On Reset Switch. 3.19.Power Input Connector 3.20.External Clock Input Display Controller. 4.JUMPER SETTINGS 5.POWER SUPPLY SPECIFICATION 6.CURRENT CONSUMPTION. 6.1.Power System Chart. 6.2.Current Consumption (Reference).
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
7.MEMORY 7.1.SH7709A Memory 7.2.PCMCIA Slot Addresses 7.3.ISH-Bus ISA-Bus Expansion 7.3.1.SH-bus. 7.3.2.ISA-bus 7.4.U1, Functions. 8.LAN FUNCTIONS 8.1.Outline 8.2.Internal Registers. 8.3.NE2000-Compatible RTL8019AS Unique Registers 8.3.1.NE2000-Compatible Registers 8.3.2.Registers Unique RTL8019AS 8.4.RTL8019AS Configuration Setup Mode. 8.5.Initial Value Configuration Registers. 9.TERMINAL CHARACTERISTICS. 9.1.CARD-E09A Connectors. 9.2.PCMCIA Slot. 9.3.ISH Expansion Bus. 9.4.LCD Connector 9.5.CRT Connector 9.6.Mouse Keyboard Connectors. 9.7.Parallel 9.8.Serial 9.9.Miscellaneous(Serial IrDA)IF. 9.10.10BASE-T Connector. 9.11.Touch Panel Connector 9.12.Speaker Connector 9.13.EPROM Socket 9.14.Backup Battery 9.15.Power Input 10.CARD-E09A MOUNTING PROCEDURE 11.DIMENSION CHART 12.LIST CONNECTORS.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
1.CAUTIONS
Make sure that connected CARD-E09A evaluation board (Evaluation board, thereafter) before mounting CARD-E09A. system startup PROM present CN15 socket, leave pins open.
2.OUTLINE
Evaluation board contains standard connectors, power circuit, Ethernet circuit (10BASE-T) others required connect peripheral units functional evaluation SCE8700C Series Card-PC (called CARD-E09A) that uses SH7709A (SH3). Note: connecter CARD-E09A different from EASI connector.
2.1.Features 240-pin connector CARD-E09A Dual PCMCIA slots extension (SH-bus, ISA-bus others) 50-pin connector 15-pin D-sub connector display Mini-DIN connector PS/2 mouse keyboard connector Parallel port interface connector Dual-channel serial port interface (the 16550-compatible RS-232C interface) connector Single-channel serial port interface (SH3 built-in serial channel interface with FIFO, RS-232C interface) connector Single-channel serial port interface IrDA connector Single-channel serial port interface (SH3 built-in without FIFO) connector Ethernet (10BASE-T) interface Touch panel interface Speaker connector(s) PROM socket Backup battery pack
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
2.2.Block Diagram
+3.3/5V
MOUSE/KB BUFFER PARALLEL TOUCH PANEL SERIAL SERIAL SERIAL IrDA SPEAKER
+3/5V POWER
+3.3V
BUFFER
PCMCIA SLOT-A
PCMCIA SLOT-B
CARD-E09A
CA22-25 A0-22 BUFFER
DRIVER DRIVER DRIVER
D0-15
ISH-BUS
Interrupts, Signals
SHSignals BUFFER
(10BASE-T)
PROM (SOCKET)
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
2.3.Appearance Connector Layout
195mm
Touch Panel 10BASE-T MOUSE/K
CN14
CN13
MISC
SCIF
Parallel
LED1 LED2 LED3 LED4 LED5
132mm
SCIF3 SCIF4
CN10
CARD-E09A
CN15
PCMCIA
CN11
SPEAKER
CN12
-Bus
CN16
POWER
CN17 attery mounted back.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
3.PIN ASSIGNMENT
Refer table below cross reference power supply signal name.
CARD-E09A Evaluation Board CARD-E09A Voltage +3.3V +5.0V
following symbols used "Type" column each pin. Input Output Output (Open drain output) Output (Tri-state output) Input/output Power ground (GND) Analog input/output Analog output
POWER Analog Analog
3.1.CARD-E09A Connectors 240-pin connector used CARD-E09A attachment. function details, "CARD-E09A Hardware Manual." Connector: Molex 53481-2409
SH-Card?Connector Signal Name BCD1# BCE1# BCE2# BOE# SLOT_B_VCC BVS1 BIORD# BIOWR# BWE# BRDY_IRQ# BVS2 BRESET BWAIT# BREG# BBVD2_SPKR BBVD1_STSCHG# Type POWER POWER POWER Function PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B power PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal +3.3V (P3V) power PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
BWP_IOIS16# BCD2# BADRENA# BDATAENA# BVPPPGM BVPPVCC BVCC5# BVCC3# KBCLK KBDATA MSCLK MSDATA RESETDRV IOCHRDY IOW# IOR# MEMCS16# SBHE# IOCS16# MEMR# MEMW# ISADATAENA# RI4# DTR4# VCORE VCORE CTS4# TXD4 RTS4# RXD4 DSR4# DCD4# RI3# DTR3# CTS3# TXD3 RTS3# RXD3 DSR3# DCD3# CKIO TCLK RESETP# RESETM# WAIT# CS2# CS0# RD/WR# WE1# WE0#
POWER POWER POWER POWER POWER
PCMCIA slot-B signal Ground PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B signal PCMCIA slot-B control signal PCMCIA slot-B control signal PCMCIA slot-B control signal PCMCIA slot-B control signal Keyboard clock Keyboard data Mouse clock Mouse data ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus data enable signal FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface core logic power core logic power FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface FIFO serial (16550-compatible) interface SH-bus signal (clock) Reset signal (Power-ON reset) Reset signal (Manual reset) SH-bus signal SH-bus signal control signal SH-bus signal SH-bus signal SH-bus signal SH-bus signal
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
ACD1# ACE1# ACE2# AOE# SLOT_A_VCC
POWER POWER POWER POWER POWER POWER POWER
SH-bus signal Address Address Address +3.3V (P3V) power Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Data Data Data +3.3V (P3V) power Data Data Data Data Data Data Data Data Data Data Data Data Data
PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A power
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
AVS1 AIORD# AIOWR# AWE# ARDY_IRQ# AVS2 ARESET AWAIT# AREG# ABVD2_SPKR ABVD1_STSCHG# AWP_IOIS16# ACD2# AADRENA# ADATAENA# AVPPPGM AVPPVCC AVCC5# AVCC3# CA25 CA24 CA23 SLCT BUSY ACK# LPTD7 LPTD6 LPTD5 LPTD4 LPTD3 SLCTIN# LPTD2 INIT# LPTD1 VCORE ERROR# LPTD0 AFD# STROBE# STANDBY# ROMDIS# RESERVE EXTCLKI RESERVE CA22 TXD0 SCK0 RXD0
POWER POWER POWER POWER POWER
PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal +3.3V (P3V) power PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A signal PCMCIA slot-A control signal PCMCIA slot-A control signal PCMCIA slot-A control signal PCMCIA slot-A control signal Address Address Address Parallel signal Parallel signal Parallel signal Parallel signal Parallel data Parallel data Parallel data Parallel data Parallel data Parallel signal Parallel data Parallel signal Parallel data core logic power backup power Parallel signal Parallel data Parallel signal Parallel signal Standby (suspend) status signal CARD-E09A internal disable signal Display controller external clock input Address Serial Serial Serial converter port
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
TXD1 RXD1 TXD2 RXD2 RTS2# CTS2# PWOFF# SRBTN# FPVCCON PTC7/PINT7 PTC6/PINT6 PTC5/PINT5 PTC4/PINT4 PTC3/PINT3 PTC2/PINT2 PTC1/PINT1 DACK0# DREQ0# DACK1# DREQ1# IRQ1 IRQ2 IRQ3 IRQ4 VSYNC HSYNC FPDAT15 FPDAT14 FPDAT13 FPDAT12 FPDAT11 FPDAT10 FPDAT9 FPDAT8 FPDAT7 FPDAT6 FPDAT5 FPDAT4 FPDAT3 FPDAT2 FPDAT1 FPDAT0
POWER POWER POWER POWER POWER
converter port converter port converter port IrDA serial IrDA serial FIFO serial FIFO serial FIFO serial FIFO serial Power-OFF enable signal Suspend/Resume button signal signal port/interrupt port/interrupt port/interrupt +3.3V (P3V) Power port/interrupt port/interrupt port/interrupt port/interrupt control signal control signal control signal control signal Interrupt request signal Interrupt request signal Interrupt request signal Interrupt request signal Interrupt request signal signal signal signal signal signal signal (data) signal (data) signal (data) signal (data) signal (data) signal (data) signal (data) signal (data) +3.3V (P3V) signal (data) signal (data) signal (data) signal (data) signal (data) signal (data) signal (data) signal (data)
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
DOTCLK FPVEEON LINE FRAME
POWER
signal signal signal signal signal
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
3.2.PCMCIA Slots Connector CN11 dual-slot PCMCIA interface. type-II PC-card inserted into slot type-III PC-card inserted into slot Slot connector. Slot bottom connector shown below.
Card surface
Board side
Connectors Header: Ejector: 92140-040 (Slot 92140-045 (Slot 95079-02CA (Slot 95079-00CA (Slot
(Both made BERG Corp.)
CN11 PCMCIA Connector Signal Name A_D3 A_D4 A_D5 A_D6 A_D7 ACE1# A_A10 AOE# A_A11 A_A9 A_A8 A_A13 A_A14 AWE1# ARDY_IRQ# SLOT_A_VCC VPP1 A_A16 A_A15 A_A12 A_A7 A_A6 A_A5 A_A4 A_A3 A_A2 A_A1 A_A0 A_D0
POWER POWER POWER
Function Slot-A data Slot-A data Slot-A data Slot-A data Slot-A data Slot-A card enable signal Slot-A address Slot-A output enable signal Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A write enable signal Slot-A ready/interrupt request signal Slot-A power Slot-A power Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A data
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
A_D1 A_D2 AWP_IOIS16# ACD1# A_D11 A_D12 A_D13 A_D14 A_D15 ACE2# AVS1 AIORD# AIOWR# A_A17 A_A18 A_A19 A_A20 A_A21 SLOT_A_VCC A_VPP2 A_A22 A_A23 A_A24 A_A25 AVS2 ARESET AWAIT# AREG# ABVD2_SPKR ABVD1_STSCHG# A_D8 A_D9 A_D10 ACD2# B_D3 B_D4 B_D5 B_D6 B_D7 BCE1# B_A10 BOE# B_A11 B_A9 B_A8 B_A13 B_A14 BWE1# BRDY_IRQ#
POWER POWER POWER POWER POWER POWER
Slot-A data Slot-A data Slot-A write protect (16-bit signal)
Slot-A card detect signal Slot-A data Slot-A data Slot-A data Slot-A data Slot-A data Slot-A card enable signal Slot-A voltage sense signal Slot-A read signal Slot-A write signal Slot-A address Slot-A address Slot-A address Slot-A address Slot-A address Slot-A power Slot-A power Slot-A address Slot-A address Slot-A address Slot-A address Slot-A voltage sense signal Slot-A card reset signal Slot-A wait signal Slot-A register select signal Slot-A battery voltage sense/speaker signal Slot-A battery voltage sense/status change signal Slot-A data Slot-A data Slot-A data Slot-A card detect signal
Slot-B data Slot-B data Slot-B data Slot-B data Slot-B data Slot-B card enable signal Slot-B address Slot-B output enable signal Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address lot-B write enable signal Slot-B ready/interrupt request signal
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
SLOT_B_VCC B_VPP1 B_A16 B_A15 B_A12 B_A7 B_A6 B_A5 B_A4 B_A3 B_A2 B_A1 B_A0 B_D0 B_D1 B_D2 BWP_IOIS16# BCD1# B_D11 B_D12 B_D13 B_D14 B_D15 BCE2# BVS1 BIORD# BIOWR# B_A17 B_A18 B_A19 B_A20 B_A21 SLOT_B_VCC B_VPP2 B_A22 B_A23 B_A24 B_A25 BVS2 BRESET BWAIT# BREG# BBVD2_SPKR BBVD1_STSCHG# B_D8 B_D9 B_D10 BCD2#
POWER POWER POWER POWER POWER POWER POWER
Slot-B power Slot-B power Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B data Slot-B data Slot-B data Slot-B write protect (16-bit signal)
Slot-B card detect signal Slot-B data Slot-B data Slot-B data Slot-B data Slot-B data Slot-B card enable signal Slot-B voltage sense signal Slot-B read signal Slot-B write signal Slot-B address Slot-B address Slot-B address Slot-B address Slot-B address Slot-B power Slot-B power Slot-B address Slot-B address Slot-B address Slot-B address Slot-B voltage sense signal Slot-B card reset signal Slot-B wait signal Slot-B register select signal Slot-B battery voltage sense/speaker signal Slot-B battery voltage sense/status change signal Slot-B data Slot-B data Slot-B data Slot-B card detect signal
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.3.ISH Extension Connector 100-pin extension which SH-bus signals, ISA-bus signals others. memory maps their areas addresses.
Connector: TX15-100P-LT-MH1 (JAE)
ISH-bus Connector Signal Name RESETDRV IOCHRDY IOW# IOR# MEMCS16# SBHE# IOCS16# MEMR# MEMW# ISADATAENA# CKIO TCLK RESETP# RESETM# WAIT# CS2# RD/WR# WE1# WE0# BA25 BA24 BA23 BA22 BA21 BA20 BA19 BA18 BA17 BA16 BA15 BA14 BA13 BA12 BA11 BA10 POWER POWER Function ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal data enable signal SH-bus signal (clock) SH-bus signal (clock) SH-bus signal (clock) SH-bus signal (clock) ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal ISA-bus signal Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address Address
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
RESERVE RESERVE RESERVE STANDBY# RESERVE PWOFF# SRBTN# PTC7/PINT7 PTC6/PINT6 PTC5/PINT5 PTC4/PINT4 PTC3/PINT3 PTC2/PINT2 PTC1/PINT1 FPVCCON DACK0# DREQ0# DACK1# DREQ1# IRQ1 IRQ2 IRQ3 IRQ4 BD15 BD14 BD13 BD12 BD11 BD10
POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER
Address Address Address Address conversion Standby signal Power-OFF signal Suspend/resume button signal Port-C signal Port-C signal Port-C signal Port-C signal Port-C signal Port-C signal Port-C signal signal signal signal signal signal Interrupt request power power power +3.3V power +3.3V power +3.3V power Interrupt request Interrupt request Interrupt request Interrupt request Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data Data
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.4.LCD Connector Connector 50-pin, header interface.
Connector: PS-50PE-D4T1-B1 (JAE)
Connector Signal Name FRAME LINE DOTCLK FPDAT8 FPDAT7 FPDAT6 FPDAT5 FPDAT4 FPDAT3 FPDAT2 FPDAT1 FPDAT0 FPVEEON FPVCCON P12V P12V P12V FPDAT9 FPDAT10 FPDAT11 FPDAT12 FPDAT13 FPDAT14 FPDAT15 RESERVE FPVEEON Type POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER POWER Function +3.3V power (*1) Frame pulse signal Line pulse signal clock (shift clock) +3.3V power (*1) Display data Display data Display data Display data Display data +3.3V power (*1) Display data Display data Display data Display data +3.3V power (*1) power control signal power control signal Multi-purpose signal (*2) Multi-purpose signal (*2) +12V power +12V power +12V power Multi-purpose signal (*2) Display data Display data Display data +3.3V power (*1) Display data Display data Display data Display data +3.3V power (*1) power control signal
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
RESERVE RESERVE RESERVE
+3.3VDC +5VDC applied pins, which determined setting.
Pins connected Pins connected +3.3V (default)
signals pins signals, clocks, display enable signals setup SED1355 display controller used CARD-E09A. these function details, SED1355 manual.
3.5.CRT Display Connector Connector 15-pin, D-sub display interface (IF).
Connector: 17HE-B13150-74HC1 (DDK)
Connector Signal Name HSYNC VSYNC Type Analog Analog Analog POWER POWER POWER POWER POWER Function GREEN BLUE Horizontal sync signal Vertical sync signal
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.6.Mouse Keyboard Interface Connector type mouse keyboard interface. This connector allows direct connection mouse keyboard. special branch connector necessary connect keyboard mouse same time.
Connector: TCS7927-56-401 (Hoshiden)
KB/MS Connector Signal Name MSDATA KBDATA MSCLK KBCLK Type POWER POWER Function Mouse data Keyboard data power Mouse clock Keyboard clock
3.7.Parallel Port Interface Connector 26-pin header parallel port interface.
Connector: PS-26PE-D4T1-B1 (JAE)
Parallel Connector Signal Name STROBE# AFD# ERROR# INIT# SLCTIN# ACK# BUSY SLCT Type POWER POWER POWER POWER POWER POWER POWER POWER Function Strobe signal Auto Feed signal Data Error signal Initialize signal Data Select signal Data Data Data Data Data Acknowledge signal Busy signal Paper signal Select signal
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
3.8.Serial Port Interface Connectors CN6, CN10 serial port interfaces with 10-pin, header. Connector serial port interface with FIFO from SH3. Connectors CN10 16550-compatible serial port interface. They connected RS-232C driver/receiver.
Connector: PS-10PE-D4T1-B1 (JAE)
SCIF Connector Signal Name RESERVED RXD2 RTS2# TXD2 CTS2# RESERVED SCIF3 Connector Signal Name DCD3# DSR3# RXD3 RTS3# TXD3 CTS3# DTR3# RI3# CN10 SCIF4 Connector Signal Name DCD4# DSR4# RXD4 RTS4# TXD4 CTS4# DTR4# RI4# Type POWER Function Receive data Request send signal Transmit data Clear send data
Type POWER
Function Data carrier detect signal Data ready signal Receive data Request send signal Transmit data Clear send signal Data terminal ready signal Ring indicator signal
Type POWER
Function Data carrier detect signal Data ready signal Receive data Request send signal Transmit data Clear send signal Data terminal ready signal Ring indicator signal
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.9.Miscellaneous Interface Connector 10-pin herder with following functions. Serial port interface from with FIFO, driver/receiver. Serial port interface IrDA 1.0; pins Power signal; +3.3V powers; pins
Connector: PS-10PE-D4T1-PN1
MISC Connector Signal Name TXD0 SCK0 RXD0 TXD1 RXD1 PSOFF Type POWER POWER POWER Function power +3.3V power Transmit data Serial clock Receive data Transmit data IrDA Receive data IrDA Ground Power control signal (Low power High power Off)
3.10.10BASE-T Interface Connector CN13 10BASE-T interface.
Connector: 290A-88-30-335 (Mitsumi)
CN13 Connector Signal Name Type Function Transmit data (Positive) Transmit data (Negative) Receive data (Positive) Receive data (Negative)
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
3.11.Touch Panel Connector Connector CN14 4-pin touch panel interface. supports four-wire, resistance membrane touch panel.
Connector: FFC-4CM1 (Honda)
CN14 Touch Panel Connector Signal Name TPX1 TPY1 TPX2 TPY2 Type Analog Analog Analog Analog Function
Touch panel connection diagram.
TPY2 TPX2 TPY1 TPX1
PTC4-2, AN5-4 IRQ2 CARD-E09A.
State PTC4 /PINT4 output value PTC3 /PINT3 output value PTC2 /PINT2 output value CARD-E09A signals IRQ2
Reads Reads waiting interrupt UP/DOWN detection
X-Read Y-Read interrupt DOWN Read occurs
3.12.Speaker Connectors Connector CN12 dual-pin speaker connector. Terminal converter output CARDE09A used.
Connector: 173981-2 (AMP)
CN12 Speaker Connector Signal Name SPEAKER+ SPEAKERType Analog Analog Function Speaker (Positive) Speaker (Negative)
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.13.PROM Socket Connector CN15 40-pin PROM socket (with power). used connected. PROMs having 1M-bit (64K bits), 2M-bit (128K bits), 4M-bit (256K bits) JEDEC standard assignment used.
CN15 PROM Socket Signal Name
Type POWER POWER POWER
Function (Connected board) Chip enable Data Data Data Data Data Data Data Data Ground Data Data Data Data Data Data Data Data Output enable Address Address Address Address Address Address Address Address Address Ground Address Address Address Address Address Address Address Address Address power
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
3.14.Backup Battery CN17 backup battery holder, CR2032 manganese dioxide lithium battery used.
Battery holder: HL32-A2 (Sony)
CN17 Battery Holder Signal Name Type POWER POWER Function Battery positive terminal Battery negative terminal
Battery used: CR2032 (3V, mAh)
3.15.LEDS LED4 LED5 power status indicator LEDs. Green LED4 lights when power turns Orange LED5 lights when power ready off.
LED5 switching meaningful only when PWOFF# signal (pin card) controlled software.
3.16.Suspend/Resume Switch push button switch used suspend resume request power-off ready request).
3.17.Manual Reset Switch push button switch used manual function reset. (When switch pressed, RESETM# signal Low.)
3.18.Power-On Reset Switch push button switch used power-on reset. (When switch pressed, RESETP# signal Low.)
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.19.Power Input Connector CN16 4-pin, power input connector. Although +12V power inputs available, this Evaluation board operate with power only following cases. card inserted into PCMCIA slot does +12V power. panel does +12V power.
Connector: 178454-1 (AMP)
CN16 Power Connector Signal Name P12V Type POWER POWER POWER POWER Function +12V power
power
3.20.External Clock Input Display Controller CARD-E09A reference clock select function SED1355 display controller. Although SED1355 usually operates MHz, External Clock Input mode selected reference clock needs adjusted connected. select External Clock Input mode, enter clocks into (through hole terminal) board. connected EXTCLKI signal (pin 174) CN1. Additional software setup required. details, manual SH-CARD Windows CE2.11 Development Kit.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
4.JUMPER SETTINGS
board three jumper connectors (JP1, JP3).
JP1: Boot selection
Short Open System starts with PROM mounted CN15. (Default) System starts with internal CARD-E09A. PROM CN15 ignored.
connected when delivered. Open have PROM.
JP2: VCORE selection
Pins shorted Pins shorted VCORE=3.3Vis VCORE=1.9V (Default) Caution: this setup CARD-E09A.
JP3: (CN3, selection
Pins shorted Pins shorted VCC=3.3V VCC=5V
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
5.POWER SUPPLY SPECIFICATION
following provides power supply specifications board. Power supply Name board Input voltage CN16 tolerance +5.0V +/-5% (Note1) +12V P12V +12.0V (Note Power supply +3.3V core power supply backup power supply Name board VCORE Supply voltage accuracy +3.3V ±0.1V +1.9V ±0.1V +2.0V +3.6V (VBK P3V)
power converted board power circuit supplied +3.3V core power circuits. Also, lithium battery +3.3V powers switched supplied backup power circuit.
Note board devices with +/-5% voltage tolerance. However, following points should considered.
When power supplied PCMCIA slot, voltage drop resistance PCMCIA power switch circuit follows. Check power supply specifications card load current before use.
Voltage drop
Load current Load current voltage drop ratio PCMCIA power
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
Note Consider following points +12V power having required accuracy.
Follow accuracy load circuit connected +12V power supply panel (CN3). Similar power supply, +12V voltage drop PCMCIA slot resistance power switching circuit. Check power supply specifications load current card before use.
Voltage drop
Load current Load current voltage drop ratio PCMCIA (VPP) power
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
6.CURRENT CONSUMPTION
6.1.Power System Chart following shows power supply system.
BATTERY
3-Terminal
3.3V
3-Terminal
1.9V CORE (3.3V) Compact Flash Card
ADDRESS &DATA BUFFER-IC Touch Panel PCMCIA Power
RS232C Driver Anather Logic PCMCIA (SLOT- A,B) Connector
SLOT_*_V
(*:A
+12V
3.3/5V Converter Buffer Controller KEYBOARD MOUSE PROM SPEAKER
Power System Chart
6.2.Current Consumption (Reference) following provides reference current consumption CARD-E09A. Supply power connector CN16 according your application. current consumption CARD-E09A Compact Flash Card, respective manuals.
(Converted) Power Supply 100mA 30mA 80mA 80mA 120mA 120mA 100mA 500mA (*2) Power Supply
CARD-E09A Evaluation Board (excluding CARD-E09A)
Keyboard PROM Others (3.3V system) Others system) PCMCIA SLOT-A PCMCIA SLOT-B Power expansion
60mA (*1) 60mA (*1) 100mA (*1)
required card +12V power. Maximum value available expansion bus, including current consumption devices 16-bit current board those mounted universal area.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
7.MEMORY
7.1.SH7709A Memory following provides standard SH7709A memory EPROM, PCMCIA, ISA-bus SHbus areas. details, "CARD-E09A Hardware Manual."
00000000h
Area0
open: Internal CARD-E09A short: External SH7709A internal register
04000000h
Area1
08000000h
Area2
SH-Bus
0C000000h
Area3
SDRAM Companion chip internal CARDE09A(if short)
10000000h
Area4
14000000h
Area5
SED1355
18000000h
Area6
PCMCIA/ISA SH7709A internal register
1C000000h
Area7
Area system operation starts from area after reset. open, internal flash CARD-E09A used area short, PROM mounted CN15 used area later case, internal CARD-E09A seen area
Area Area used through expansion CN2. chip select signal area CS#2. Addresses BA25 expansion used. Data BD15 expansion used together with ISA-bus.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Area following addresses assigned inside area
Area6 18000000h PCMCIA-0 Memory/Attribute PCMCIA-1 Memory/Attribute PCMCIA-2 Memory/Attribute
18800000h
19000000h
19800000h
PCMCIA-4 PCMCIA-5 PCMCIA-6 Memory
1A000000h 1A800000h
1B000000h
1B800000h 1BC00000h 1BFFFFFFh
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
7.2.PCMCIA Slot Addresses Upper address bits (A23, A25) PCMCIA slot slot determined "Slot Address Register" CARD-E09A. Refer "CARD-E09A Hardware Manual" detail.
SH7709A addresses Area 18000000h 18800000h 19000000h 19800000h 1A000000h 1A800000h 1B000000h 1B800000h 1BFFFFFFh Memory
Slot output addresses 0000000h 0800000h 1000000h 1800000h 2000000h 2800000h 3000000h 3800000h
Determined value Area Select bits Slot Configuration registers (11000100h, 11000140h)
Determined value CA25, CA24 CA23 Slot Address registers (11000102h, 11000142h)
Item PCMCIA slot address
Effective address
Explanation A23, determined "Slot Address Register "Slot Address Register
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
7.3.ISH-Bus ISA-Bus Expansion
7.3.1.SH-bus Signals area SH7709A directly connected expansion bus. Item SH-bus expansion Effective address BA25 Explanation
7.3.2.ISA-bus SH7709A addresses mapped shown above. Upper address bits output ISA-bus determined "ISA Address Register" CARD-E09A. details, refer "CARD-E09A Hardware Manual." Item ISA-bus address expansion Effective address BA23 Explanation BA22 BA23 determined "ISA Address Register."
following provides relationship between memory addresses.
SH7709A addresses Area 18000000h 1B800000h 1BC00000h 1BFFFFFFh MEMORY Determined value SA22 SA23 bits Address Register (11000870h) address output buses 000000h 400000h 800000h C00000h FFFFFFh 000000h 400000h 800000h C00000h FFFFFFh
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
ISA-bus Areas Controller following shows controller areas ISA-bus, they determined population resistor R30, R31, R33. (High-order bits address used BA22 BA23 selection.) area BA22=0 BA23=0 when delivered.
Signal BA23 BA22 Address value OPEN Mounted Mounted OPEN OPEN Mounted Mounted OPEN
Summary table following provides relationship between ISA-bus expansion bus.
Signal A21-0 D15-D0 CKIO, BS#, RD#, RD/WR#, WE0#, WE1#, WAIT#, CS2# SBHE#, IOR#, IOW#, IOCS16#, MEMR#, MEMW#, MEMCS16#, IOCHRDY, RESETDRV, ISADATAENA# SH-bus ISA-bus
available 7.4.U1, Functions this board control data addresses. shown reference circuit diagram this board includes other functions than 5-volt 3.5-volt conversion. When want details this section, separate reference circuit diagram covering functions.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
8.LAN FUNCTIONS
8.1.Outline Evaluation board uses REALTEK's RTL8019AS Ethernet controller that meets IEEE 802.3 Standards compatible NE2000 series. controller following features. 16K-byte SRAM buffer (included RTL8019AS) 10BASE-T interface
RTL8019AS connected ISA-bus CARD-E09A (refer chapter describing memory map)
8.2.Internal Registers RTL8019AS types registers: NE2000-compatible RTL8019AS unique registers, plug-and-play (called "PnP") registers. this board setup, register description omitted.
8.3.NE2000-Compatible RTL8019AS Unique Registers following lists registers compatible NE2000 series those unique RTL8019AS controller. registers shown boldface unique RTL8019AS, others compatible NE2000. Registers accessed through page mapping, four total pages accessed setup bits (PS1 PS0) register. During access, bits register must set. Then, data written read appropriate port.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
PAGE=0 (PS1=0, PS0=0)
Index 10-17 18-1F Read Write Command register (CR) Command register (CR) Current Local address (CLDA0) Page Start register (PSTART) Current Local address (CLDA1) Page Stop register (PSTOP) Boundary pointer (BNDR) Boundary pointer (BNRY) Transmit Status register (TSR) Transmit Page Start address (TPSR) Number Collisions register (NCR) Transmit Byte Count register (TBCR0) FIF0 Transmit Byte Count register (TBCR1) Interrrupt Status register (ISR) Interrrupt Status register (ISR) Current Remote address Remote Start Address register (RSAR0) (CRDA0) Current Remote address Remote Start Address register (RSAR1) (CRDA1) 8019ID0 Remote Byte Count register (RBCR0) 8019ID1 Remote Byte Count register (RBCR1) Receive Status register (RSR) Receive Configuration resister (RCR) Tally counter (CNTR0) Transmit Configuration resister (TCR) Tally counter (CNTR1) Data Configuration resister (DCR) Tally counter (CNTR2) Interrupt Mask register (IMR) Remote Port Reset Port
PAGE=1 (PS1=0, PS0=1)
Index 10-17 18-1F Read Command register (CR) Physical Address register (PAR0) Physical Address register (PAR1) Physical Address register (PAR2) Physical Address register (PAR3) Physical Address register (PAR4) Physical Address register (PAR5) Current Page register (CURR) Multicast Address register (MAR0) Multicast Address register (MAR1) Multicast Address register (MAR2) Multicast Address register (MAR3) Multicast Address register (MAR4) Multicast Address register (MAR5) Multicast Address register (MAR6) Multicast Address register (MAR7) Remote Port Reset Port Write Command register (CR) Physical Address register (PAR0) Physical Address register (PAR1) Physical Address register (PAR2) Physical Address register (PAR3) Physical Address register (PAR4) Physical Address register (PAR5) Current Page register (CURR) Multicast Address register (MAR0) Multicast Address register (MAR1) Multicast Address register (MAR2) Multicast Address register (MAR3) Multicast Address register (MAR4) Multicast Address register (MAR5) Multicast Address register (MAR6) Multicast Address register (MAR7)
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
PAGE=2
Index 10-17 18-1F
(PS1=1, PS0=0)
Read Write Command register (CR) -Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-Read only-
Command register (CR) Page Start register (PSTART) Page Stop register (PSTOP) -ReservedTransmit Page Start address (TPSR) Configuration resister (RCR) Transmit Configuration resister (TCR) Data Configuration resister (DCR) Interrupt Mask register (IMR) Remote Port Reset Port
PAGE=3
Index 10-17 18-1F
(PS1=1, PS0=1)
Read Write Command register (CR) 9346CR BPAGE -ReservedCONFIG1 CONFIG2 CONFIG3 TEST -ReservedHLTCLK -Reserved-ReservedFMWP -Reserved-Reserved-Reserved-
Command register (CR) 9346CR BPAGE CONFIG0 CONFIG1 CONFIG2 CONFIG3 -ReservedCSNSAV -Reserved-ReservedINTR -ReservedCONFIG4 -Reserved-ReservedRemote Port Reset Port
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
8.3.1.NE2000-Compatible Registers Command register (CR) (00h; type) Used register page selection, enabling disabling remote operations, command issue.
Symbol PS1,PS0 Explanation Page Select: Register page Explanation NE2000 compatible NE2000 compatible NE2000 compatible Unique RTL8019AS
Remote Command:
Function allowed Remote Read Remote Write Transmits packets. Aborts completes remote DMA.
Transmit Packet bit: This must always packet transfer. When packet transfer completed aborted, this internally reset. Nothing occurs when zeros (0s) written. Start bit: This does affect system control. value written this read only. zero during power-up.) Stop bit: This STOP command. When set, packets sent received all. during power-up.) Function Start command Stop command
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Interrupt Status register (ISR) (07h; Page type) This register indicates status Network Interface controller (NIC), used determine interrupt cause. cleared when each Also, register must cleared after power-up.
Symbol Explanation Reset Status: This when reset, cleared when Start command issued Also, when receive buffer overflowed, cleared when more packets read from buffer. Remote Complete: when remote completed. Counter Overflow: when more Network Tally counters. Overwrite Warning: when Receive buffer exhausted. Transmit Error: packet transfer completed excessive collision. Receive Error: when packet having more following errors received. error Frame alignment error Packet missing Packet Transmitted: This shows that packets have been transmitted without errors. Packet Received: This shows that packets have been received without errors.
Interrupt Mask register (IMR) (0Fh; Page type) (0Fh; Page type) bits correspond bits register. They zeros (0s) during power-up. interrupt enabled when set.
Symbol RDCE CNTE OVWE TXEE RXEE PTXE PRXE Explanation Complete Interrupt Enable: Counter Overflow Interrupt Enabel: Overwrite Warning Interrupt Enabel: Transmit Error Interrupt Enable: Receive Error Interrupt Enable: Packet Transmitted Interrupt Enable: Packet Received Interrupt Enable:
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
Data Configuration register (DCR) (0Eh; Page type) (0Eh; Page type)
Symbol FT1,FT0 Explanation Always FIFO Threshold Select: FIFO Threshold Select bits Auto Initialize Remote: Does execute transmit command. Executes transmit command. Loopback Select: Select Loopback mode. Bits must also allow loopback operations. Selects normal operation mode. Long Address Select: This must zero (0). This supports dual 16-bit mode only. during power-up.) Byte Order Select: Sets byte MD15 byte (32xxx, 80x86) Sets byte byte MD15 (680x0) Word Transfer Select: Selects byte-width transfer. Selects word-width transfer.
Transmit Configuration register (TCR) (0Dh; Page type) (0Dh; Page type)
Symbol OFST Explanation Always Always Always Collision Offset Enable Auto Transmit Disable: Normal operation Disables transmitter when receives multicast address hashed enables transmitter when receives multicast address hashed Encoded Loopback Control: Explanation Mode0 Mode1 Mode2 Mode3 Inhibit CRC: Setup MODE Normal Normal Loopback Loopback logic operation Generator Checker Enabled Disabled Enabled Disabled Disableld Enabled Disabled Enabled Normal operation Internal loopback External loopback External loopback
LB1,LB0
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Transmit Status register (TSR) (04h; Page type) This register shows packet transmission status.
Symbol Explanation Window Collision: This when collision detected after slot time (51.2 microseconds). Similar usual collision, packets rescheduled transmitted. Heartbeat: must start Collision signal Heartbeat signal) within first microseconds interframe following transmission. This transceiver cannot transmit this signal. Always Carrier Sense Lost: This carrier lost during packet transmission. Transmit Aborted: This shows that packet transmission aborted excessive collision. Transmit Collided: This shows that packet transmission collided another station network. Always Packet Transmitted: This shows that packet transmission completed without errors.
Receive Configuration register (RCR) (0Ch; Page type) (0Ch; Page type)
Symbol Explanation Always Always When Monitor Mode set, receive packets checked their addresses, frame alignment. they buffered memory. Otherwise, packets buffered memory. Promiscuous Physical: PRO=1, packets have physical addresses accepted. PRO=0, packets accepted their physical node address matches station address PAR0 PAR5. Accept Multicast: AM=1, packets having multicast destination addresses accepted. AM=0, packets having multicast destination addresses rejected. Accept Broadcast: AB=1, packets having broadcast destination addresses accepted. AB=0, packets having broadcast destination addresses rejected. Accept Runt Packets: AR=1, packets shorter than bytes accepted. AR=0, packets shorter than bytes rejected. Save Errored Packets: SEP=1, packet having receive error accepted. SEP=0, packet having receive error rejected.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
Receive Status register (RSR) (0Ch; Page type)
Symbol Explanation Deferring: This when carrier collision detected. Receive Disable: This when enters Monitor mode, receiver disabled. This reset when Monitor mode ended receiver enabled. Physical/Multicast Address: when receive packet multicast broadcast destination address. reset when receive packet physical destination address. Missed Packet: This when packet rejected insufficient receive buffer Monitor mode selected. CNTR2 tally counter incremented. Always Frame Alignment Error: This shows that input packet does byte boundary does match last byte boundary. CNTR0 tally counter incremented. Error: This shows that receive packet error. This also during error. CNTR1 tally counter incremented. Packet Received Intact: This shows that packets have been received without errors.
Current Local registers (CLDA0 (01h 02h; Page type) current local address obtained from these registers.
CLDA1 CLDA0
Page Start register (PSTART) (01h; Page type) (01h; Page type) This register sets Start Page address receive buffers. Page Stop register (PSTOP) (02h; Page type) (02h; Page type) This register sets Stop Page address receive buffers.
PSTART/ PSTOP
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Boundary register (BNRY) (03h; Page type) This register used prevent overwrite receive buffers. usually used pointer Receive Buffer page that host recently read.
BNRY
Transmit Page Start register (TPSR) (04h; Page type) This register sets Start Page address packets transmitted.
TPSR Bit5 Bit3 Bit2
Transmit Byte Count registers (TBCR0 (05h 06h; Page type) transmit packet length bytes) these registers.
TBCR1 TBCR0 TBC15 TBC7 TBC14 TBC6 TBC13 TBC5 TBC12 TBC4 TBC11 TBC3 TBC10 TBC2 Bit1 TBC9 TBC1 Bit0 TBC8 TBC0
Number Collisions register (NCR) (05h; Page type) This register stores number collision times occurring during packet transmission.
First-In, First-Out register (FIFO) (06h; Page type) FIFO contents after loopback checked this register.
FIFO
Current Remote Address registers (CRDA0 (08h 09h; Page type) Current address remote stored these registers.
CRDA1 CRDA0
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
Remote Start Address registers (RSAR0 (08h 09h; Page type) Start address remote these registers.
RSAR1 RSAR0
Remote Byte Count registers (RBCR0 (0Ah 0Bh; Page type) data byte count remote these registers.
RBCR1 RBCR0 Bit7 RBC15 RBC7 RBC14 RBC6 RBC13 RBC5 RBC12 RBC4 RBC11 RBC3 RBC10 RBC2 RBC9 RBC1 RBC8 RBC0
Frame Alignment Error Tally Counter register (CNTR0) (0Dh; Page type)
CNTR0 CNT7 CNT6 Bit5 CNT5 CNT4 CNT3 CNT2 CNT1 CNT0
Error Tally Counter register (CNTR1) (0Eh; Page type)
CNTR1 CNT7 CNT6 CNT5 CNT4 CNT3 CNT2 CNT1 CNT0
Missed Packet Tally Counter register (CNTR2) (0Fh; Page type)
CNTR2 CNT7 CNT6 CNT5 CNT4 CNT3 CNT2 CNT1 CNT0
Physical Address registers (PAR0 PAR5) (01h 06h; Page type) Ethernet node addresses these registers. They compared with destination address input packets, used packet acceptance rejection.
PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 DA15 DA23 DA31 DA39 DA47 DA14 DA22 DA30 DA38 DA46 DA13 DA21 DA29 DA37 DA45 DA12 DA20 DA28 DA36 DA44 DA11 DA19 DA27 DA35 DA43 DA10 DA18 DA26 DA34 DA42 DA17 DA25 DA33 DA41 DA16 DA24 DA32 DA40
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Current Page register (CURR) (07h; Page type) This register points page address first receive buffer page used packet reception.
CURR
Multicast Address registers (MAR0 (08h 0Fh; Page type) These registers provide filtering bits multicast addresses hashed logic.
MAR0 MAR1 MAR2 MAR3 MAR4 MAR5 MAR6 MAR7 FB15 FB23 FB31 FB39 FB47 FB55 FB63 FB14 FB22 FB30 FB38 FB46 FB54 FB62 FB13 FB21 FB29 FB37 FB45 FB53 FB61 FB12 FB20 FB28 FB36 FB44 FB52 FB60 FB11 FB19 FB27 FB35 FB43 FB51 FB59 FB10 FB18 FB26 FB34 FB42 FB50 FB58 FB17 FB25 FB33 FB41 FB49 FB57 FB16 FB24 FB32 FB40 FB48 FB56
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
8.3.2.Registers Unique RTL8019AS introduced above, registers unique RTL8019AS used Page Page follows.
Page 8019AS read.
INDEX Name 8019ID0 8019ID1 Type
following explains contents unique registers used Page 9346CR Register
Symbol EEM1-0 TYPE Explanation Selects RTL8019AS operation mode. EEM1 EEM0 Normal operation mode Normal (DP8390-compatible) Auto Load: When this mode selected, RTL8019AS loads 93C46 contents similar time when RSTDRV activated. (The load time msec.) When data load completed, operation automatically returned normal mode (EEM1=EEM0=0). register reset 21h. 93C46 Programming: this mode, both local remote operations disabled. 93C46 accessed directly bits that reflect each status EECS, EESK, EEDI, EEDO pins. Config Register Write Enable: This mode must selected write data CONFIG1 registers Page
EECS EESK EEDI EEDO
used Reflect each status EECS, EESK, EEDI, EEDO pins Auto Load mode 93C46 Programming mode.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
BPAGE register 02h) This register selects BROM page that read host. However, this Evaluation board does support BROM this register used. CONFIG0 register (03h)
7and6 Symbol VERID TYPE Explanation Controller (RTL8019AS) version Bit7 Bit6 Mode Initial value Write-enabled EEM1=EEM0=1 9346CR register.
PNPJP
1and0
10Base5 mode selected (pin high Others always zero this board. Indicates status zero this board. Indicates status zero (not jumpered) this board. when 10BASE2 mode selected following satisfied. PL1=PL0=0 (Auto Detect mode) Link test failed. PL1=PL0=1 (10BASE2 mode) Always zero
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
CONFIG1 register (04h
Symbol IRQEN TYPE Explanation
6to4
IRQS2-0
IRQS2_0 status control. goes high when interrupt request issued, goes when request present. Turns tri-state output. Initial value this 9346CR. When register EEM1 EEM0 overwrite enabled. select: used selecting which RTL8019AS used. Outputs selected forced tristate. When specified from setting EEPROM, this board selects INT0. This output connected IRQ1 CARDE09A.
IRQS2 IRQS1 IRQS0 Interrupt line INT0 INT1 INT2 INT3 INT4 INT5 INT6 INT7
3to0
I0S3-0
used selecting base address (see Note). When specified from setting EEPROM, this board selects 300h.
IOS3 IOS2 IOS1 IOS0 base address 300h 320h 340h 360h 380h 3A0h 3C0h 3E0h 200h 220h 240h 260h 280h 2A0h 2C0h 2E0h
NOTE: RTL8019A connected ISA-bus CARD-E09A. When base (hex), configuration this board practice, shown below.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Both bits Address Register CARD-E09A address gained access 1BC0030h Area-6. CONFIG2 register (05h)
7and6 Symbol PL1-0 TYPE Explanation Selects network media type. Media type BSELB TP/CX auto-detect (10baseT link test enabled.) 10BaseT with link test disabled 10Base5 10Base2
BS4-0
When this BROM disabled regardless setup. Initial value write-enabled EEM1=EEM0=1 9346CR register. Sets BROM size memory base address. This board does support BROM. BROM Base Size BA14 High SA14 SA14 BA15 High High SA15 Disabled C000h, C800h, D000h, D800h, C000h, D000h, C000h, C400h, C800h, CC00h, D000h, D400h, D800h, DC00h, C000h, Page C400h, Page C800h, Page CC00h, Page D000h, Page D400h, Page D800h, Page DC00h, Page
BROM Size
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
CONFIG3 register (06h)
Symbol TYPE Explanation When this RTL8019AS operating mode. This when high when 93C46 Jumper-less mode. ignored Jumper mode. When this set, RTL8019AS full-duplex mode that allows simultaneous transmission reception twistedpair link full-duplex Ethernet switching hub. Selects output LED2 LEDS0 LEDS1 LED0 LED_COL LED_LINK LED1 LED_RX LED_CRS LED2 LED_TX MCSB
FUDUP
5and
LEDS1-0
SLEEP
PWRDN
ACTIVEB
Reserved. Value must written. Selects Sleep mode follows. Sleep mode Normal mode Initial value write-enabled EEM1=EEM0=1 9346CR register. Selects Power Down mode follows. Power Down mode Normal mode initial value obtained from 93C46, write-enabled EEM1=EEM0=1 9346CR register. There types Power Down mode, depending HLTCKL register setup. Mode Power down with clock operation Mode Power down with stopped clock both mode types, serial network interface transceiver RTL8019AS turned off. network operations ignored. Also, signals (except LEDBNC) high. Mode internal clock RTL8019AS stopped. Usually, registers (except HLTCLK) cannot accessed this mode. This inverse Activate register (index 30h). When RTL8019AS deactivated, access group-1 registers (except BROM memory read HLTCLK registers) ignored. HLTCLK regis logic operated normal way.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
TEST register (07h)
Symbol TYPE Explanation Reserved. Write-inhibited.
CSNSAV register (08h; type) (This register used backup assigned register.) HLTCLK register
Symbol HLT7-0
(09h; type)
TYPE Explanation Halt Clock register: This only register that controller access during inactive. Data writing invalid except Power Down mode. Write value Power Down mode Mode Power down with clock operation Mode Power down with stopped clock Others Ignored
INTR register
(0Bh; type)
ISA-bus status INT7 pins reflected.
FMWP register
Symbol
(0Ch; type)
TYPE Explanation Flash Memory Write Protect: Meaningless this board does flash memory. writeenabled EEM1=EEM0=1 9346CR register. Data written into flash memory times continuous data writing (57h 58h). value other than written, write sequence aborted memory write-protected.
CONFIG4 register
Symbol IOMS
(0Dh; type
TYPE Explanation Reserved. Uses SA15 address decoding NE2000 register. (I/O address full decoding) Uses address decoding NE2000 register.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
8.4.RTL8019AS Configuration Setup Mode RTL8019AS supports three configuration modes jumper setup, jumperless setup, setup. This Evaluation board uses jumperless setup mode hardware setup shown bottom table. low, low, EEPROM (93C46) (not equal PNP) select jumperless setup mode.
(pin High (pin High
93C46
Configuration mode Jumper mode mode mode jumperless mode
resource configuration information RTL8019AS (such base address interrupt request lines) stored CONFIG3 registers Page explained above. initial value these registers depend EEPROM contents jumperless mode. loaded from EEPROM when Auto Load command executed when hardware reset signal issued RTL8019AS. value modified after startup, held CONFIG3 registers used. However, configuration value lost when Auto Load command executed, hardware reset issued RTL8019AS, power supply turned off. initial value cannot changed this board modification means modification EEPROM contents.
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
8.5.Initial Value Configuration Registers following lists initial values CONFIG1 registers that when Auto Load command executed when hardware reset signal generated. value "Before loaded" value that been loaded from EEPROM. value "93C46" storage value" value that contained EEPROM loaded when triggered. value shaded area initially regardless EEPROM contents. CONFIG1
Name Before loaded 93C46 storage value Initial value
IRQEN
IRQS2
IRQS1
IRQS0
IOS3
IOS2
IOS1
IOS0
CONFIG2
Name Before loaded 93C46 storage value Initial value
BSELB
CONFIG3
Name Before loaded 93C46 storage value Initial value
FUDUP
LEDS1
LEDS0
SLEEP
PWRDN
ACTIVEB
CONFIG4
Name Before loaded 93C46 storage value Initial value
IOMS
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
9.TERMINAL CHARACTERISTICS
9.1.CARD-E09A Connectors "Termination-1" gives termination specifications CARD-E09A. value parentheses valid SLOT_A_VCC SLOT_B_VCC "Termination-2" gives termination specifications this board. type termination
Signal Name ACD1#, ACD2#, AVS1, AVS2, BCD1#, BCD2#, BVS1, BVS2 ARDY_IRQ#, AWAIT#, ABVD2_SPKR, ABVD1_STSCHG#, AWP_IOIS16#, BRDY_IRQ#, BWAIT#, BBVD2_SPKR, BBVD1_STSCHG#, BWP_IOIS16#, ACE1#, ACE2#, AOE#, AIORD#, AIOWR#, AWE#, ARESET, AREG#, BCE1#, BCE2#, BOE#, BIORD#, BIOWR#, BWE#, BRESET, BREG# AADRENA#, ADATAENA#, AVPPPGM, AVPPVCC, AVCC5#, AVCC3#, BADRENA#, BDATAENA#, BVPPPGM, BVPPVCC, BVCC5#, BVCC3#, DREQ0#, DREQ1# DACK0#, DACK1# RESETDRV, IOW#, IOR#, SBHE#, MEMR#, MEMW#, ISADATAENA# IOCHRDY, MEMCS16#, IOCS16#, TXD0, SCK0 RXD0 TXD1 RXD1 TXD2, RTS2# RXD2,CTS2# TXD3, TXD4, DTR3#, DTR4#, RTS3#, RTS4# RXD3, RXD4, DSR3#, DSR4#, CTS3#, CTS4#, DCD3#, DCD4#, RI3#, RI4# IRQ1-4 SRBTN# STANDBY#, PWOFF# CKIO, CS0#, CS2#, RD/WR#, WE1#, WE0#, RD#, WAIT# ROMDIS# TCLK RESETP#, RESETM# Type Termination-1 Card) 100KPU 100K(60K)PU Termination-2 (Board)
100KPU 100KPU 100KPU Active 100KPU
1.2KPU
50KPU
60KPU 100KPU 60KPU 4.7KPU 50KPU 100KPU
1.2KPU 1.2KPU
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
DA0, PTC7/PINT7-PTC1/PINT1 LINE, FRAME, DOTCLK, MOD, FPVCCON, FPVEEON, FPDAT0-15 VSYNC, HSYNC, LINE B,G,R EXTCLKI KBCLK, KBDATA, MSCLK, MSDATA SLCT, BUSY, ACK#, ERROR# SLCTIN#, INIT#, AFD#, STROBE#, LPTD7-0 A25-22 A21-0 CA25-22 D15-8 D7-0
60KPU
150PD 100KPU HOLD 100KPU HOLD
(5V) 10KPU (5V) 10KPU (5V)
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
9.2.PCMCIA Slot following provides signal characteristics when CARD-E09A inserted into socket. values parentheses "Termination" column valid when SLOT_A_VCC SLOT_B_VCC Termination Output
Signal Name Type Termination 3.3V(5V) A_D0-15 B_D0-15 ACE1#, ACE2#, AOE#, AWE1#, AIORD#, AIOWR#, ARESET BCE1#,BCE2#, BOE#, BWE1#, BIORD#, BIOWR#, BRESET A_A0-25 B_A0-25 AREG# BREG# ARDY_IRQ#, AWP_IOIS16#, AWAIT#, ABVD2_SPKR, ABVD1_STSCHG#, BRDY_IRQ#, BWP_IOIS16#, BWAIT#, BBVD2_SPKR, BBVD1_STSCHG# ACD1#, ACD2#, AVS1, AVS2, BCD1#, BCD2#, BVS1, BVS2 100K(60K)PD 100K(60K)PD 100KPU Drive(mA) 3.3V/5V -2/-3 -2/-3 -2/-3 Output voltage(V) [max] [min] SLOT_A_VCC-0.4 SLOT_B_VCC-0.4 SLOT_A_VCC-0.4
100KPU
-2/-3
SLOT_B_VCC-0.4
100K(60K)PU
-2/-3 -2/-3 -2/-3 -2/-3
SLOT_A_VCC-0.4 SLOT_B_VCC-0.4 SLOT_A_VCC-0.4 SLOT_B_VCC-0.4
100KPU
Input
Signal Name Type Input Low(V) [min] [max] 0.8/1.0 0.8/1.0 0.8/0.8 0.8/0.8 [min] 2.0/3.5 2.0/3.5 2.0/2.0 2.0/2.0 Input High(V) [max] SLOT_A_VCC SLOT_B_VCC SLOT_A_VCC SLOT_B_VCC
A_D0-15 B_D0-15 ARDY_IRQ#, AWP_IOIS16#, AWAIT#, ABVD2_SPKR, ABVD1_STSCHG#, BRDY_IRQ#, BWP_IOIS16#, BWAIT#, BBVD2_SPKR, BBVD1_STSCHG# ACD1#, ACD2#, AVS1, AVS2, BCD1#, BCD2#, BVS1,2
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
9.3.ISH Expansion Termination Output
Signal Name Type Termination Drive(mA) Output Voltage(V) [max] [min] P3V-0.4
RESETDRV, IOW#, IOR#, SBHE#, MEMR#, MEMW#, STANDBY# ISADATAENA# CKIO, CS2#, RD/WR#, WE1#, WE0#, RD#, PWOFF# DACK0#, DACK1# FPVCCON BA25-22 BA21-0 BD15-0 PTC7/PINT7 -PTC1/PINT1 IOCHRDY, MEMCS16#, IOCS16#, RESETP#, RESETM#, TCLK, WAIT#, SRBTN#, DREQ0#, DREQ1# IRQ1-4
60KPU 100KPD 60KPU 1.2KPU
-0.2 -0.2 -0.2
0.55 0.55 0.55
P3V-0.4 P3V-0.4 P3V-0.4 P3V-0.4 P3V-0.4
100KPU 60KPU
Input
Signal Name Type Input Low(V) [min] [max] -0.3 P3Vx0.2 -0.3 -0.3 -0.3 P3Vx0.1 P3Vx0.2 [min] P3Vx0.9 P3V-0.5 Input High(V) [max] P3V+0.3 P3V+0.3 P3V+0.3 P3V+0.3
IOCHRDY, MEMCS16#, IOCS16# TCLK, WAIT#, SRBTN#, DREQ0#, DREQ1# RESETP# (Cautions), RESETM#, IRQ1-4 PTC7/PINT7-PTC1/PINT1 BD15-0
Cautions: RESET# signal must exceed 0.5V backed when system power supply off. (This rule must also used during transient power on/off switching.)
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
9.4.LCD Connector Output
Signal Name Type Drive(mA) -0.2 Output voltage(V) [max] [min] P3V-0.3 0.55 P3V-0.3
FRAME, LINE, DOTCLK, MOD, FPDAT15-0 FPVEEON FPVCCON
9.5.CRT Connector Termination output
Signal Name Type Termination Drive(mA) Output voltage(V) [max] [min] P3V-0.3
HSYNC, VSYNC
Analog
150PD
9.6.Mouse Keyboard Connectors Termination output
Signal Name Type Termination Drive(mA) Output voltage(V) [max] [max]
MSDATA, KBDATA, MSCLK, KBCLK
I/OD
1.2KPU[5V]
Input
Signal Name Type Input Low(V) [min] [max] [min] Input High(V) [max]
MSDATA, KBDATA, MSCLK, KBCLK
I/OD
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
9.7.Parallel Termination output
Signal Name Type Termination Drive(mA) Output voltage(V) [max] [min]
STROBE#, AFD#, INIT#, SLCTIN# ERROR#, ACK#, BUSY, SLCT PD0-7
I/OD I/OD
10KPU[5V] 10KPU[5V] 10KPU[5V]
Input
Signal Name Type Input Low(V) [min] [max] [min] Input High(V) [max]
STROBE#, AFD3, INIT#, SLCTIN# ERROR#, ACK#, BUSY, SLCT PD0-7
I/OD I/OD
9.8.Serial Termination output
Signal Name Type Termination Input Low(V) [min] [max] [min] Input High(V) [max]
RXD2, CTS2# RTS2#, TXD2
5.5KPD
Termination output
Signal Name Type Termination Input Low(V) [min] [max] [min] Input High(V) [max]
DCD3#, DCD4#, DSR3#, DSR4#, RXD3, RXD4 CTS3#, CTS4# RI3#, RI4# RTS3#, RTS4# TXD3, TXD4 DTR3#, DTR4#
5.5KPD
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
9.9.Miscellaneous(Serial IrDA)IF Output
Signal Name Type Drive(mA) -0.2 Output voltage(V) [max] [min] 0.55
TXD0, SCK0, TXD1 PSOFF
Input
Signal Name Type Input Low(V) [min] [max] P3Vx0.2 [min] Input High(V) [max] P3V+0.3
RXD0,1
9.10.10BASE-T Connector
Signal Name Type
9.11.Touch Panel Connector
Signal Name TPX1 TPY1 TPX2 TPY2 Type Analog Analog Analog Analog
9.12.Speaker Connector
Signal Name SPEAKER+ SPEAKERType Analog Analog
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
9.13.EPROM Socket Termination output
Signal Name Type Termination Drive(mA) Output voltage(V) [max] [min] P3V-0.4
CE#, OE3, A17-0
60KPD
Input
Signal Name Type Input Low(V) [min] [max] [min] Input High(V) [max]
9.14.Backup Battery
Backup voltage(V) VIN(Min) VIN(Max)
9.15.Power Input
Signal name P12V Voltage +12V
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
10.CARD-E09A MOUNTING PROCEDURE
Tools required: Three keys long) Three nuts Three screws
Insert three keys into three board holes, tighten them using three nuts. Securely insert CARD-E09A board into socket shown. Tighten three screws board (onto three keys).
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
12.LIST CONNECTORS
CN6,8,10 CN11 Location SH-CARD ISH-BUS MISC SERIAL MOUSE/KB PARALLEL PCMCIA LOWER HEADER PCMCIA UPPER HEADER PCMCIA LOWER EJECTOR PCMCIA UPPER EJECTOR SPEAKER 10BASE-T TOUCH PANEL POWER Connector model 53481-2409 TX15-100P-LT-MH1 PS-50PE-D4T1-B1 PS-10PE-D4T1-PN1 17HE-B13150-74HC1 PS-10PE-D4T1-B1 TCS-7927-56-401 PS-26PE-D4T1-B1 92140-040 92140-045 95079-02CA 95079-00CA 173981-2 290A-88-30-335 FFC-4CM1 178454-1 Manufacturer MOLEX HOSHIDEN BERG BERG BERG BERG MITSUMI HONDA Connector applicable TX14-100R-LT-MH1 PS-50SM-D4P1-1C PS-10SM-D4P1-1C PS-10SM-D4P1-1C PS-26SM-D4P1-1C 179228-2 (Housing) 179518-1 (Contact) HKP-4FS01 (Housing) HKP-F113 (Contact) 1-480424-0 (Housing) 170148-1 (Contact)
CN12 CN13 CN14 CN16
Manufacturer's name (abbreviation) details
MOLEX HOSHIDEN BERG MITSUMI HONDA
Molex Inc. Japan Aviation Electronics Industry, Ltd. Daiichi Denshi Kogyo Corp. Hoshiden Corp. Berg Electronics, Japan Corp. Inc. Mitsumi Electric Machinery Corp. Honda Communication Industry Corp.
EPSON
Rev.A
Board
(SCE88J2B01)
Hardware Manual
CARD-E09A Evaluation Hardware Manual
Contents
1.OVERVIEW 2.BLOCK DIAGRAM. 3.BOARD EXTERNAL VIEW 4.FUNCTION DESCRIPTION 4.1.ISH Expansion Connector 4.2.Logic Analyzer Connector. 4.3.LED Debugging. 4.4.Universal Board. 5.ELECTRICAL SPECIFICATIONS.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
1.OVERVIEW
Board evaluation board connected expansion connector (CN2) CARD-E09A Evaluation Board. "CARD-E09A Evaluation Board Hardware Manual" also. Board following functions used evaluation CARD-E09A. Through-holes which output signals from expansion signals from expansion output board. used signal verification signal output. LEDs debugging 16-bit LEDs available debugging. LEDs come corresponding status data bits port. Logic analyzer connector Connector connecting logic analyzer mounted. Universal board Universal board mounted. board contains 2.54-mm pitch through-holes pads which added evaluation.
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
2.BLOCK DIAGRAM
BA00~23 Decoder
BD00-15 extension
Latches
connector logic analyzer CKIO,RD#,WE0#,WE1#,CS2
Disconnect signal through hole
Through hole(full signals)
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
3.BOARD EXTERNAL VIEW
Board dimensions: 195!132 (same CARD-E09A Evaluation Board)
2.54mm pitch, through hole(21x28 holes)
Through hole ISH-BUS signal throughput
Pass controller
Pass controller
Connector logic analyzer debugging
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
4.FUNCTION DESCRIPTION
Relationship between power signal name indications voltages follows.
Board CARD-E09A Evaluation Board CARD-E09A Voltage +3.3V +5.0V
4.1.ISH Expansion Connector
100-pin connector. used connecting with expansion CARD-E09A Evaluation Board. signals from expansion output expansion output through-holes located center board. detailed information signal types functions, which same CARD-E09A Evaluation Board, "CARD-E09A Evaluation Board Hardware Manual". Connector: TX14-100R-LT-MH1 (JAE) ISH-BUS Connector Signal Name Signal Name RESETDRV RESERVE IOCHRDY RESERVE IOW# IOR# RESERVE MEMCS16# STANDBY# SBHE# RESERVE IOCS16# PWOFF# MEMR# SRBTN# MEMW# PTC7/PINT7 ISADATAENA# PTC6/PINT6 CKIO PTC5/PINT5 TCLK PTC4/PINT4 RESETP# PTC3/PINT3 RESETM# PTC2/PINT2 WAIT# PTC1/PINT1 CS2# FPVCCON RD/WR# DACK0# WE1# DREQ0# WE0# DACK1# DREQ1# BA25 BA24 BA23 BA22 BA21 BA20 BA19 IRQ1
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
BA19 BA18 BA17 BA16 BA15 BA14 BA13 BA12 BA11 BA10
IRQ1 IRQ2 IRQ3 IRQ4 BD15 BD14 BD13 BD12 BD11 BD10
4.2.Logic Analyzer Connector
CN2, connectors connecting logic analyzer 20-pin type header. Each signal connected signal having same name CN1. Among these connectors, have signals connected only through-hole located close CN5, thereby allowing additional signal connection when necessary. signals CS0#, BD16 correspond such signals. signal names have special meanings; they only convenience. (For these signals, columns shaded, Remarks columns marked with asterisk.) Connector: J3592-6002FL (3M) Logic analyzer connector
Signal Name Remarks CKIO BA15 BA14 BA13 BA12 BA11 BA10
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
Logic analyzer connector Signal Name Remarks BA25 BA24 BA23 BA22 BA21 BA20 BA19 BA18 BA17 BA16 CS0# CS2# CS3# CS4# CS5# CS6#
Logic analyzer connector Signal Name Remarks WE0# BD15 BD14 BD13 BD12 BD11 BD10
EPSON
Rev.A
CARD-E09A Evaluation Hardware Manual
Logic analyzer Signal Name WE1# BD31 BD30 BD29 BD28 BD27 BD26 BD25 BD24 BD23 BD22 BD21 BD20 BD19 BD18 BD17 BD16
connector
Remarks
4.3.LED Debugging
LEDs debugging. CARD-E09A, when data written addresses 81h, data latched corresponding each data comes on/goes off. comes when data indicates goes when data indicates "0". addresses BA23 decorded. corresponds corresponds When BD00="1" comes When BD15="1" comes
Rev.A
EPSON
CARD-E09A Evaluation Hardware Manual
4.4.Universal Board
universal board equipped with 2.54-mm pitch through-holes three sets 20-pin pad. pads equipped with pads pass-controller connected (Note) grounded. (Note) Although silk indication board "VCC", pads connected P3V.
5.ELECTRICAL SPECIFICATIONS
circuit LEDs debugging operates with power supply. electrical specifications this circuit follows: GND=0V Unit
Item Circuit power supply voltage Input voltage each signal SBHE#, IOW#)
Min.
Max.
EPSON
Rev.A
International Sales Operations
AMERICA
EPSON ELECTRONICS AMERICA, INC. HEADQUARTERS
1960 Grand Avenue Segundo, 90245, U.S.A. Phone +1-310-955-5300 +1-310-955-5400
ASIA
CHINA EPSON (CHINA)CO.,LTD.
28F, Beijing Silver Tower North DongSanHuan ChaoYang District, Beijing,CHINA Phone 64106655 64107320
SALES OFFICES West
River Oaks Parkway Jose, 95134, U.S.A. Phone +1-408-922-0200 +1-408-922-0238
SHANGHAI BRANCH
Bldg., Jing Road Caohejing, Shanghai, CHINA Phone 21-6485-5552 21-6485-0775 HONG KONG, CHINA
Central
Virginia Street, Suite Crystal Lake, 60014, U.S.A. Phone +1-815-455-7630 +1-815-455-7633
EPSON HONG KONG LTD.
20/F., Harbour Centre, Harbour Road Wanchai, HONG KONG Phone +852-2585-4600 +852-2827-4346 Telex 65542 EPSCO
Northeast
Edgewater Place, Suite Wakefield, 01880, U.S.A. Phone +1-781-246-3600 +1-781-246-5443
TAIWAN, R.O.C. EPSON TAIWAN TECHNOLOGY TRADING LTD.
10F, 287,Nanking East Road, Sec. Taipei, TAIWAN, R.O.C. Phone 02-2717-7360 02-2712-9164 Telex 24444 EPSONTB
Southeast
3010 Royal Blvd. South, Suite Alpharetta, 30005, U.S.A. Phone +1-877-EEA-0020 +1-770-777-2637
HSINCHU OFFICE
13F-3, No.295, Kuang-Fu Road, Sec. HsinChu 300, TAIWAN, R.O.C. Phone 03-573-9900 03-573-9169
EUROPE
EPSON EUROPE ELECTRONICS GmbH HEADQUARTERS
Riesstrasse 80992 Muenchen, GERMANY Phone +49- 89-14005-0 +49- 89-14005-110
SINGAPORE EPSON SINGAPORE PTE., LTD.
Temasek Avenue, #36-00 Millenia Tower, SINGAPORE 039192 Phone +65-337-7911 +65-334-2716
GERMANY SALES OFFICE
Altstadtstrasse 51379 Leverkusen, GERMANY Phone +49- 217-15045-0 +49- 217-15045-10
KOREA SEIKO EPSON CORPORATION KOREA OFFICE
50F, Bldg., Yoido-Dong Youngdeungpo-Ku, Seoul, 150-010, KOREA Phone 02-784-6027 02-767-3677
UNITED KINGDOM BRANCH OFFICE
Doncastle House, Doncastle Road Bracknell, Berkshire RG12 8PE, ENGLAND Phone +44- 1344-381700 +44- 1344-381701
JAPAN SEIKO EPSON CORPORATION ELECTRONIC DEVICES MARKETING DIVISION Electronic Device Marketing Department Card Products Marketing Group
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-7503 Fax: +81-(0)42-587-8423
FRANCE FRENCH BRANCH OFFICE
Avenue Atlantique, Conquerants Z.A. Courtaboeuf F-91976 Ulis Cedex, FRANCE Phone +33- 1-64862350 +33- 1-64862355
International Marketing Department (Europe U.S.A.)
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5812 Fax: +81-(0)42-587-5564
International Marketing Department (Asia)
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5814 Fax: +81-(0)42-587-5110
CARD-E09A Evaluation Hardware Manual
(English)

CARD-E09A Evaluation Hardware Manual (English) SEIKO EPSON C

Top Searches for this datasheet

Other recent searches