Voltage Controlled Crystal Oscillator (VCXO) 5.0V Supply Voltage HCMOS
|
|
|
Top Searches for this datasheet
EC31 Series
Voltage Controlled Crystal Oscillator (VCXO) 5.0V Supply Voltage HCMOS/TTL output package Stability 20ppm Wide frequency pull range
EC31
5.08 20.8 13.2
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Aging 25°C) Load Drive Capability Start Time Frequency Deviation Control Voltage 1.000MHz 155.520MHz 70°C -40°C 85°C -55°C 125°C 5.0VDC ±5ppm year Maximum 10TTL Load 15pF HCMOS Load Maximum mSeconds Maximum ±50ppm Minimum ±100ppm Minimum ±150ppm Minimum ±200ppm Minimum ±20%, ±15%, ±10% Maximum, Maximum (not avail. w/±200ppm Freq. Dev.) 20mA Maximum 40mA Maximum 50mA Maximum ±100ppm, ±50ppm, ±25ppm, ±20ppm Maximum (0°C 70°C only) 2.4VDC Minimum VDD-0.5VDC Minimum 0.4VDC Maximum 0.5VDC Maximum ±10(%) (Standard) ±5(%) (Optional) nSeconds Maximum ±100pSeconds 44.736MHz ±200pSeconds >44.736MHz ±100pSeconds 30.000MHz ±200pSeconds >30.000MHz ±25pSeconds 44.736MHz ±50pSeconds >44.736MHz ±25pSeconds 30.000MHz ±50pSeconds >30.000MHz
VOLTAGE CLASS REV.DATE
2.5VDC ±2.0VDC Positive Transfer Characteristic, 2.5VDC ±2.0VDC Positive Transfer Characteristic, 2.5VDC ±2.0VDC Positive Transfer Characteristic, 2.5VDC ±2.5VDC Positive Transfer Characteristic,
Linearity Input Current 1.000MHz 20.000MHz 20.001MHz 30.000MHz 30.001MHz 155.520MHz Inclusive Operating Temperature Range, Supply Voltage, Load w/TTL Load w/HCMOS Load w/TTL Load w/HCMOS Load 1.4VDC w/TTL Load; Waveform w/HCMOS Load 1.4VDC w/TTL Load w/HCMOS Load 0.4VDC 2.4VDC w/TTL Load; Waveform w/HCMOS Load Freq. Deviation Options Blank, Freq. Deviation Options Period Jitter: Sigma Freq. Deviation Options Blank, Freq. Deviation Options
Frequency Tolerance Stability Output Voltage Logic High (VOH) Output Voltage Logic (VOL) Duty Cycle
Rise Time Fall Time Period Jitter: Absolute
MANUFACTURER
CATEGORY
SERIES
PACKAGE
ECLIPTEK CORP.
OSCILLATOR
EC31
5.0V
OS13
03/02
800-ECLIPTEK www.ecliptek.com latest revision
Specifications subject change without notice.
PART NUMBERING GUIDE EC31 24.000M
FREQUENCY TOLERANCE STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) FREQUENCY DEVIATION Blank=±50ppm Minimum (Standard) A=±100ppm Minimum B=±150ppm Minimum, C=±200ppm Minimum (2.5VDC ±2.5VDC) AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) FREQUENCY OPERATING TEMP. RANGE Blank=0°C 70°C (Standard) ET=-40°C 85°C LINEARITY Blank=20% Maximum(Standard) 05=5% Maximum, 10=10% Maximum 15=15% Maximum
NOTES
MECHANICAL DIMENSIONS
DIMENSIONS MILLIMETERS
MARKING SPECIFICATIONS
Control Voltage (VC) Case Ground Output Supply Voltage
Line ECLIPTEK Line EC31
Series Designator
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Characteristic Seal Integrity Solderability Marking Permanency Shock Vibration Specification Bubble test Perfluorocarbon +125°C ±5°C seconds minimum. Sn63 Solder +230°C ±5°C seconds/95% coverage. Strokes with brush after minute soak solvent, times. Random drop hard wooden plate times from height 20cm. Frequency with amplitude 1.5mm sweeping between 10Hz 55Hz within minute (approximately) hours minimum each axis total hours.
CATEGORY SERIES PACKAGE VOLTAGE
Line XX.XXX
Frequency Digits Maximum Decimal)
Line
Week Year Last Digit Year Ecliptek Manufacturing Identifier
Note: shall designated with
MANUFACTURER
CLASS
REV.DATE
ECLIPTEK CORP.
OSCILLATOR
EC31
5.0V
OS13
03/02
800-ECLIPTEK www.ecliptek.com latest revision
Specifications subject change without notice.
Other recent searches
SD200SD15A - SD200SD15A SD200SD15A Datasheet
JS30M - JS30M JS30M Datasheet
ICS8530 - ICS8530 ICS8530 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
