Best Selection Catalog OMRON's Fiber Sensors continue support inc
|
|
|
Top Searches for this datasheet
Fiber Sensors
Best Selection Catalog
OMRON's Fiber Sensors continue support increasing range applications.
This catalog brings latest information Fiber Units.
E32-series Fiber Units
Amplifier Units
E3X-DA-S/-MDA Series
E3X-NA Series
Standard Models
First, Standard Lineup
These Fibers Units used variety applications, such detecting presence workpieces positioning.
Wide Variety Shapes Adapting Different Installation Locations
Choose model that suits installation space from wide variety shapes sizes shapes, standard small sizes).
Space Savings Simple Mounting
Flat Models
Flat models that allow simple screw mounting straightforward wiring have been added lineup. Using these models eliminates problem fibers getting caught surrounding objects.
Flat model
Detect Workpieces Tight Spaces
Custom-produced Sleeves
Screw-shaped Cylindrical Flat Equipped with sleeve
Models with sleeves allow detection tight spaces. will perform time-consuming task fashioning sleeve, with length bends suit space (except ultrafine sleeves).
Models with sleeves
Flexible, Pliable Fiber That Handled Like Wire
have developed broad range fibers meet wide variety needs. Multicore (flexible) fiber type standard fiber that used like wire without worrying about bending radius. have also produced fiber that will break when used moving parts fiber that degraded contact with oil.
Length Specified Units
Saving Energy Work
will produce fiber required length meter units). large-scale installations, specifications handled. (Specifications also possible.)
Conventional fiber
Flexible fiber
will certainly appreciate ease that flexible fiber ensures.
Special-beam Models
Detection with Increased Reliability
variety heads incorporating latest optical technology makes possible solve common problems related detection increase reliability.
Resistant dust dirt Capable detecting small workpieces Resistant workpiece vibration these models handle unstable detection conditions.
Small-spot models
E32-C42+ E39-F3A
Area-sensing models
E32-T16J
Limited-reflective models
E32-L24L
High-power models
E32-T17L
Environmentresistive Models
High Resistance External Conditions with Fiber
have developed model variations adapting variety environmental conditions. These models enable detection high-temperature environments vacuums.
Heat-resistant models
Chemical-resistant models
High-temperature environments Environments subject splattering chemicals Vacuums these models handle applications special environments.
Applicationcorresponding Models
Fiber Units Food-packaging, Semiconductor, Industries
These models, which were developed specific applications, offer top-quality detection performance.
Label detection Liquid-level detection Alignment mapping glass substrates Wafer mapping these models specific applications.
Label-detection models
E32-G14
Alignment-check models
E32-L16
Liquid-level detection models
E32-D36T
Selection Guide
Fiber Units have developed model variations handling broad range applications.
Amplifier Units
Fiber Units
Detection conditions Standard detection Environmental conditions Standard environments Standard Models
Workpiece presence Positioning Level differences marks
Special environments
High-temperature environments Environments subject scattering chemicals Vacuum environments
Environment-resistive Models
P.14
Workpiece presence
Positioning
Level differences
Marks
Workpiece presence
Positioning
Level difference
Special-beam Models Specialbeam
Long-distance sensing, resistance dust dirt Small beam, resistance rattling Detection transparent objects
P.10
High power
Small spot
Area sensing Retroreflective sensing
Application-corresponding Models Applicationcorresponding
Labels Liquid level Alignment mapping glass substrates Wafer mapping
P.16
Labels
Liquid level
Alignment
Mapping
Amplifier Units
Type Digital Manual
Appearance
2-channel models
(2-output models: (high-speed models: green display levels) 8-turn sensitivity adjuster delay timer (fixed Water-resistant models available. E3X-MDA@ E3X-NA@ E3X-NA@F (high-speed model) E3X-NA@V (water-resistant model)
Response time
Light source Red, green, blue, infrared Dual display (including digital, bar, percent, hold display functions) Threshold adjustment performed manually teaching OFF-delay, ON-delay, one-shot timer (adjustable from Advanced-function models available (2-output/input models). Models E3X-DA@-S E3X-DA@TW-S (2-output model) E3X-DA@RM-S (input model)
Function
CONTENTS
Selection Guide
Overview Features, Applications, Variations
Standard Models Flexible (New Standard)
Standard Break-resistant Fluorine Coating
Special-beam Models
Long Distance, High Power
Ultracompact, Ultrafine Sleeve Coaxial, Small Spot Fine Beam (Narrow Vision Field) Area Sensing. Retroreflective Convergent-reflective
Environment-resistive Models
Heat-resistant
Chemical-resistant. Vacuum-resistant
Application-corresponding Models
Label Detection.
Liquid-level Detection Glass-substrate Alignment Glass-substrate Mapping Water Mapping
Ordering Information
Through-beam Fiber Units Fiber Units with Reflective Sensors Application-corresponding Fiber Units
Ratings/Characteristics Dimensions
Through-beam Fiber Units Fiber Units with Reflective Sensors Application-corresponding Fiber Units
Precautions
Features/Applications
Standard Models
Flexible (New Standard)
Perform wiring without worrying about bending radius. Choose model suit installation space from variety shapes. Flexible fiber Conventional fiber
Feature: Multicore (Flexible) Fibers
Cores Cladding
large number ultrafine cores surrounded cladding. result, fiber flexible bent without significantly reducing light intensity. This helps solve problems, such fiber being broken getting caught other objects.
Ratings/Characteristics
Min. sensing 0.005-mm dia. object Min. bending radius Ambient tem-40°C 70°C icing condensation) perature range Fiber material Plastic
Fewer problems
Light intensity affected bends fiber Fiber broken getting caught surrounding objects
Standard
Feature: Flat Models
Choose model suit installation space from variety shapes. flat models allow space savings simple installation. Flat models, which allow simple attachment wiring, have been added lineup. Choose model suit installation space from sensing directions sizes, standard small.
Ratings/Characteristics
Min. sensing 0.005-mm dia. object Min. bending radius Ambient tem-40°C 70°C icing condensation) perature range
Screw-shaped
Cylindrical
Flat
Equipped with sleeve
Fiber material Plastic *Depends fiber diameter.
Break-resistant
Bundle-fiber models used moving parts. Capable withstanding least million repeated bends typical applications).
Feature: Bundle Fibers
Fiber Units contain large number independent fine fibers, ensuring high degree flexibility.
Ratings/Characteristics
Min. sensing 0.005-mm dia. object Min. bending (withstands repeated bending) radius Ambient tem-40°C 70°C icing condensation) perature range Fiber material Plastic
Standard Models
Fluorine Coating
Fiber degradation prevented using fluo- Feature: Fluorine Coating roresin coating. (Cross section) Free cutting possible with cutter provided.
blocked!
Fluororesin used sheath material prevent fiber degradation resulting from adhesion.
Note: head chemical-resistant.
Fluororesin coating
Ratings/Characteristics
Min. sensing object Min. bending radius 0.005-mm dia.
Ambient tem-40°C 70°C (with icing condensation) perature range Fiber material Plastic
Fiber Customization Service Length, Bends)
(Fiber Length, Sleeve
This customization/delivery service applies standard models. aimed reducing industrial waste simplifying installation procedure.
Fiber Length Sensing Distance Through-beam Fiber Units Fiber Units with Reflective Sensors (Fiber length corresponds (Fiber length corresponds 100%.) 100%.)
Sensing distance
Fiber Length Aplicable Models Standard models Model Number Used Ordering Standard model number Fiber length Fiber length: length from units)
Sensing distance
Fiber length
Fiber length
Sleeve Length Bends Applicable Models E32-TC200B/E32-TC200F E32-DC200B/E32-DC200F E32-DC200B cannot bent.
Model Number Used When Changing Only Sleeve Length
Model: E32- C200
Model Number Used When Changing Sleeve Length Bends
Total length Total length
Model Numbers Incorporating Bending Radius, Dimensions Specifying Only (Units: Specifying Only (Units:
Bending radius
R7.5 R12.5
(±1) Model number E32- C200 E32- C200 12.5 17.5 17.5 22.5 E32- C200 E32- C200 E32- C200 E32- C200 E32- C200 E32- C200
Bending radius
R7.5 R12.5
(±1) Model number E32- C200 E32- C200 17.5 12.5 22.5 E32- C200 E32- C200 E32- C200 E32- C200 E32- C200 E32- C200
Insert Through-beam Fiber Units Fiber Units with Reflective Sensors. Insert that appears original model number. Insert "50" total length total length must exceed
Features/Applications
Standard Models
Overview Model Variations
Sensing distance (mm) (See note Model Standard Break-resistant Fluorine coating
Through-beam Fiber Units
Type Flexible (New Standard) (See note
(Cross section)
Fluororesin coating
Shape head
Flexible pliable E32-T11R E32-T21R E32-TC200E E32-TC200BR E32-TC200FR E32-T12R dia. E32-T222R dia. E32-T14LR dia. E32-T24R E32-T24 E32-T15XR E32-T25XR E32-T25X E32-T15YR E32-T25YR E32-T25Y E32-T15ZR E32-T25ZR E32-T25Z E32-T15Z E32-T15Y E32-T15X E32-T14L E32-T222 E32-T12 E32-TC200F E32-TC200B E32-TC200
Withstands repeated bending E32-T11 E32-T21
Cable protected against E32-T11U
Screw-shaped
(top-view)
(with sleeve)
(1.2-dia. sleeve) (0.9-dia. sleeve)
Cylindrical
(top-view)
dia.
E32-T12B E32-T22B
(side-view)
Flat
(top-view)
E32-T15XB E32-T25XB
(side-view)
(flat-view)
Note sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode). These symbols defined follows. Bendable fiber, Flexible fiber, Fluorine-coated fiber.
Standard Models
Overview Model Variations
Sensing distance (mm) (See note Model Standard Break-resistant Fluorine coating
Fiber Units with Reflective Sensors
Type Flexible (New Standard) (See note
(Cross section)
Fluororesin coating
Shape head
Flexible pliable E32-D11R E32-D21R E32-DC200E E32-DC200BR E32-DC200FR E32-D12R dia. (1.5 dia.) E32-D22R dia. E32-D14LR dia. E32-D24R E32-D24 E32-D15XR E32-D25X
Withstands repeated bending E32-DC200 E32-D21 E32-DC200B E32-DC200F E32-D12 E32-D22 E32-D14L E32-D22B E32-D221B E32-D11
Cable protected against E32-D11U
Screw-shaped
(top-view)
(with sleeve)
(2.5-dia. sleeve) (1.2-dia. sleeve)
Cylindrical
(top-view)
dia.
(side-view)
Flat
(top-view)
E32-D15X E32-D15XB E32-D25X E32-D25XB E32-D15Y
E32-D15YR
(side-view)
E32-D25YR
(flat-view)
E32-D25Y E32-D15ZR E32-D15Z E32-D25ZR E32-D25Z
Note sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode). These symbols defined follows. Bendable fiber, Flexible fiber, Fluorine-coated fiber.
Features/Applications
Special-beam Models
Long Distance, High Power
Powerful beam reduces influence dust dirt. Long sensing distance enables large-scale installations.
Applications
Detecting parts inside (trans- Detecting workpieces lucent) containers coating processes
E32-T11L
E32-T17L
Ratings/Characteristics
Ambient tem-40°C 70°C icing condensation) perature range
E32-T14
Fiber material Plastic
Overview Model Variations
Type Features Equipped with large lens Side-view, screw mounting screw Equipped with large lens screw Shape, sensing distance (mm)* 20,000 3,400 1,330 Model number E32-T17L E32-T14 E32-T11L E32-D16 E32-D11L
Ultracompact, Ultrafine Sleeve
Ultracompact head installed tight spaces. Ultrafine sleeve ensures reliable detection small objects, such electronic components.
Refle- Through-beam ctive
Applications
Alignment inspections Detection terminals
E32-D33
dia. dia.
E32-T223R
E32-T33-S5
0.22 dia.
dia. dia.
Ratings/Characteristics
Min. sensing 0.005-mm dia. object Ambient tem- -40°C 70°C icing condensation) perature range Material Plastic
E32-T334-S5 E32-D33
Overview Model Variations
Type Features 1-dia. cylinder 0.5-dia. sleeve (0.25-dia. opening) 0.22-dia. sleeve (0.1-dia. opening) 0.8-dia. sleeve 0.5-dia. sleeve Shape, sensing distance (mm)* Model number E32-T223R E32-T33-S5 E32-T334-S5 E32-D33 E32-D331
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Refle- Through-beam ctive
Special-beam Models
Coaxial, Small Spot
Small spot diameter (0.1 min. diameter) enables Applications reliable detection small workpieces. Detecting light ensures easy visual recognition simple positioning.
E32-C31+ E39-F3C
Ratings/Characteristics
Min. sensing object 0.005-mm dia.
E32-C42+ E39-F3A
Ambient tem-40°C 70°C icing condensation) perature range Fiber material Plastic
Overview Model Variations
Type Features Coaxial, screw Coaxial, 3-dia. cylinder Shape, sensing distance (mm)* 0.1-dia. spot distance Spot diameter variable range distances range 0.5-dia. spot Model number E32-CC200 E32-D32L E32-C41+ E39-F3A-5 E32-C42+ E39-F3A E32-C31+ E39-F3B
Coaxial, reflective
Small spot Small variable spot Long distance, small spot Long distance, parallel light
Spot diameter max. E32-C31+ distances range E39-F3C
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
dia. spot
E32-C41+ E39-F3A-5
Variable from dia.
dia. dia.
E32-C42+ E39-F3A
E32-C31+ E39-F3B
E32-C31+ E39-F3C
Features/Applications
Special-beam Models
Fine Beam (Narrow Vision Field)
Fine beam reduces unwanted light surrounding area. Powerful beam allows applications requiring long sensing distance.
Approx. Approx.
Applications
Alignment inspection orientation flats
E32-T22S
Ratings/Characteristics
Min. bending radius Ambient tem-40°C 70°C icing condensation) perature range Fiber material Plastic
1300
E32-T24S
Overview Model Variations
Type Features view Shape, sensing distance (mm)* Model number
Through-beam
1,900 E32-T22S
Side view
1,300 E32-T24S
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Area Sensing
These Fiber Units ensure greater reliability with Applications tection position inconsistencies passing workpieces presence workpieces with holes. Detecting passage Wide sensing bands (through-beam candies models) enable detection large position inconsistencies.
Detecting chips film
E32-T16WR
E32-T16PR
Ratings/Characteristics
Ambient tem- -40°C 70°C icing condensation) perature range E32-T16W@ only: -25°C 55°C Fiber material Plastic
E32-T16WR
E32-D36P1
Overview Model Variations
Type Features Sensing width: Sensing width: Flat-view Sensing width: Beam width: Shape, sensing distance (mm)* Model number E32-T16PR
Through-beam
E32-T16JR 1,300 E32-T16WR E32-D36P1
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Reflective
Special-beam Models
Retroreflective
return optical path ensures that more light interrupted transparent workpieces than with through-beam models. Equipped with function eliminate light reflected directly from workpiece.
Applications
Detecting translucent medicine
Ratings/Characteristics
Ambient temperature range E32-R21: -40°C 70°C E32-R16: -25°C 55°C (with icing condensation)
E32-R21
Fiber material Plastic
E32-R16
Overview Model Variations
Type Features function, screw function, screw mounting, long distance Shape, sensing distance (mm)* Model number
Retroreflective
E32-R21 1,500 E32-R16
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Limited-reflective
Limited-reflective models eliminate light reflected from distant objects. Small level differences reliably detected. optical-axis direction selected according installation space.
Applications
Detecting connector pins Detecting wafers (glass substrates)
E32-L25L
Non-detection range Detection range
E32-L24L
Ratings/Characteristics
Min. sensing object 0.005-mm dia. Plastic 200°C models only: Glass
E32-L24L
Fiber material
Overview Model Variations
Type Features Ultracompact, flat-view Ideal checking stocks glass substrates Heat-resistant 105°C, top-view Wide sensing range, flat-view Heat-resistant 200°C, flat-view Shape, sensing distance (mm)* Model number E32-L24S E32-L25L (center: 7.2) E32-L16 E32-L86
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Limited-reflective
Features/Applications
Environment-resistive Models
Heat-resistant
These Fiber Units used various applications temperatures 400°C.
Applications
Detecting wafers high-temperature environments
E32-T61-S
Ratings/Characteristics
150°C models Min. bending radius Plastic 200°C higher models E32-T81R other models E32-D81R Glass (SUS spiral coating)
E32-T84S-S
Glass (fluoFiber material (fluororesin coating) roresin coating)
Overview Model Variations
Type Ambient temperature range Features Shape, sensing distance (mm)* 1,300 Model number E32-T51 E32-T84S-S E32-T61-S E32-D61-S E32-D73-S
Through-beam Reflective
-40°C 150°C screw -40°C 200°C L-shaped, long distance -60°C 350°C screw -60°C 350°C screw -40°C 400°C screw, with sleeve
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Chemical-resistant
Built-in lens high-power beam reduce influence dirt drops water. Round design prevents drops water sticking head (E32-T11F).
Applications
Detecting workpieces cleaning processes
E32-T12F
Ratings/Characteristics
other models Ambient temperature range -40°C 70°C E32-T51F -40°C 150°C E32-T81F-S -40°C 200°C Glass (fluororesin coating)
E32-T14F
Plastic Fiber material (fluororesin coating)
Overview Model Variations
Type Features Water-resistant round head Built-in lens, high power Heat-resistant 200°C Built-in lens, high power Shape, sensing distance (mm)* 2,000 3,000 Model number E32-T11F E32-T12F E32-T81F-S E32-D12F
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Reflective Through-beam
Environment-resistive Models
Vacuum-resistant
These models used high-vacuum environ- Applications (Configuration Example) ments pressures from 10-5 Vacuum chamber Atmospheric-pressure side Vacuum side Lens Unit E39-F1V 4-channel multi-flange, which maximum leakage rate contributes space savings.
Fiber Unit vacuum side (set Flange E32-T51V E32-VF4 E32-T54V E32-VF1 E32-T84SV Fiber Units atmosphericpressure side (set E32-T10V Amplifier Unit E3X-DA-S E3X-NA
Ratings/Characteristics
120°C models Min. bending radius 200°C models Atmosphericpressure side Plastic
Fiber mate- Glass (fluorores- Glass (SUS coating) spiral coating) rial
Overview Model Variations
Type Features screw, top-view, heat-resistant 120°C, long distance L-shaped, heat-resistant 120°C L-shaped, long distance, heat-resistant 200°C Shape, sensing distance (mm)* 1,000 Model number E32-T51V+ E39-F1V E32-T54V E32-T84SV
Through-beam
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Fiber Units Atmospheric-pressure Side
Appearance Type Common Model number E32-T10V
Flanges
Appearance Type 4-channel flange Model number E32-VF4
1-channel flange
E32-VF1
Ratings/Characteristics
Item Number channels Model channels E32-VF4 max. Operating: -25°C 55°C Storage: -25°C 55°C Aluminum (A5056) Fluorocarbon rubber (Viton) Approx. Approx. Stainless steel (SUS304) Aluminum (A5056) channels E32-VF1
Leakage rate Ambient temperature range Material Flange-seal material Weight (packed state)
Features/Application
Application-corresponding Models
Label Detection
Built-in lens high-power beam enable reliable detection labels through mounting board. These Fiber Units washed with hydrogen peroxide, making them ideal food industry.
Applications
Detecting labels
Ratings/Characteristics
Fiber material Plastic
E32-G14
Ambient tem-40°C 70°C icing condensation) perature range
E32-G14
Degree protection
IP67
Overview Model Variations
Type Features Slot sensor, adjustment optical axis required Screw mounting, side-view Shape, sensing distance (mm)* Model number E32-G14
Through-beam
3,400
E32-T14
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Liquid-level Detection
Operating Principle Area sensing possible with minimal influence from bubbles drops water (E32-A01/A02/D36T). Tube-mounting safety when disconnections occur, models have been developed, light model liquid presTube Liquid ence light model liquid absence (E32-A01/ A02). Tube-mounting model Liquid-contact model
liquid present Liquid present
Liquid-contact model
Liquid
E32-D36T
Type
E32-D82F1
Features Light when liquid present (ideal checking lower limits) Light when liquid absent (ideal checking overflow) restriction tube diameter, resistant bubbles drops water
presence/absence liquid detected using refractive properties light. More specifically, utilizes fact that difference refractive index between tip/tube larger than difference between liquid tip/tube.
Shape, sensing distance (mm)* Model number
Overview Model Variations
Applicable tube: Transparent tube with diameter 3.2, 6.4, rec- E32-A01 ommended wall thickness Applicable tube: Transparent tube with diameter range recommended wall thickness E32-A02
Tube-mounting
Applicable tube: Transparent tube reE32-D36T striction diameter) E32-D82F1
Liquidcontact
Heat-resistant 200°C, shape preLiquid-contact model vents liquid buildup
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Application-corresponding Models
Glass-substrate Alignment
There little variation detection position within Engineering Data (E32-A07/A08/L16) detection range (±0.1 max.) Detection-Position Characteristic (Typical Examples) different model variations handle variety Sensing object: glass E32-A07 rounded edge) sensing distances temperature conditions.
Sensing distance, (mm)
E32-L16
E32-A08
E32-L16
Detection position, (mm)
Overview Model Variations
Type Features wide-range sensing Shape, sensing distance (mm)* Long-distance sensing Heat-resistant 300°C Model number E32-L16 E32-A08 E32-A07E1 E32-A07E2 E32-L66
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Glass-substrate Mapping
These models reliably detect thin glass-substrate Engineering Data (E32-A09) faces beveled edge). Digital Light-intensity Value Sensing Distance Angle Characteristics Left Right Directions (Typical Examples) (Typical Example) Using large-diameter lens makes possible cope with tilting glass substrates. Beveled
Digital light-intensity value
Rate change digital light-intensity value
Limited-reflective
Rounded edge
edge
Sensing distance, (mm)
Angle,
Sensing object: glass beveled/rounded edge)
Sensing object: glass rounded edge)
Emission side
Reception side
E32-A09
Overview Model Variations
Type Features Large-diameter lens ensures resistance tilting Heat-resistant 150°C Heat-resistant 300°C (center: Shape, sensing distance (mm)* Model number E32-A09 (center: E32-A09H E32-A09H2
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Limited-reflective
Features/Applications
Application-corresponding Models
Wafer Mapping
Wafers reliable detected with ultrafine beam. optical axis adjusted before delivery allow easy installation.
E32-A03
Features
Optical axis adjusted before delivery that displacement typically within 0.1°.
Direction rotation
Vertical rotation
E32-A03-1
Engineering Data
Rate change digital light-intensity value
8-inch Wafer Mapping Characteristic (Typical Examples) Wafer piles also detected
wafers
wafer
Fiber 6.35 2-wafer pile
Fiber
Silicon wafer 0.75
Distance moved, (mm)
Overview Model Variations
Type Features Opening angle: 1.5° Shape, sensing distance (mm)* E32-A03-1 E32-A04 E32-A04-1 Model number E32-A03
Through-beam
With mounting flange Opening angle: ultraslim With mounting flange
*The sensing distances apply combination with E3X-DA-S Amplifier Unit (general-purpose, standard mode).
Responding Increasing Size Installations
Impressive long-distance sensing capacity function eliminating light reflected from reflector Size-adjustable line area beams
Glass detection through view port
Long-distance
E3C-LDA-series Photoelectric Sensors with Separate Digital Amplifiers (Laser Type)
High-precision Sensing Simple Installation
Parallel light kept constant diameter Adjustment function adjusting optical axis
Wafer Ejection inspection
Ordering Information
Through-beam Fiber Units
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
Standard object Min. bend(min. sensing radius object) (mm) (mm)
Features
Model number
screw
E32-T11R
3-dia. cylinder
dia.
E32-T12R
(140)
Flat shape
E32-T15XR
Standard size
(40) E32-TC200B4R dia. Min. bending radius sleeve: dia.
dia. (0.005 dia.)
screw, with sleeve
E32-TC200BR E32-TC200B4R
3-dia. cylinder, side-view
(50)
E32-T14LR
Flat shape, side-view Flat shape, flat-view
E32-T15YR
Flexible (new standard)
E32-T15ZR
Standard models
screw (small) 2-dia. cylinder (small)
E32-T21R
E32-T22R
dia.
dia.
(30)
1.5-dia. cylinder E32-T222R (small) Flat shape (small) dia. (0.005 dia.) screw (small), with sleeve 1-dia. cylinder (small), side-view E32-T25XR
Small size
(40) E32-TC200F4R dia. Min. bending radius sleeve: dia.
E32-TC200FR E32-TC200F4R
E32-T24R
(10)
Flat shape (small), side-view Flat shape (small), flat-view
E32-T25YR
E32-T25ZR
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Through-beam Fiber Units
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
Standard object Min. bend(min. sensing radius object) (mm) (mm)
Features
Model number
screw
E32-TC200
3-dia. cylinder
E32-T12
1,000 (200)
Flat shape
E32-T15X
Standard size
(40) E32-TC200B4R
dia. Min. bending radius sleeve: dia.
screw, with E32-TC200B sleeve E32-TC200B4 dia. (0.005 dia.) 3-dia. cylinder, E32-T14L side-view Flat shape, side-view Flat shape, flat-view
(120)
E32-T15Y
E32-T15Z
Standard models
Standard
(180)
E32-TC200A screw (small) E32-TC200E
dia.
2-dia. cylinder (small)
(50)
E32-T22
dia.
1.5-dia. cylinder (small) Flat shape (small) dia. (0.005 dia.) screw (small), with sleeve 1-dia. cylinder (small), sideview
E32-T222
Small size
E32-T25X
(40) E32-TC200F4R dia. Min. bending radius sleeve:
E32-TC200F E32-TC200F4
dia.
E32-T24
(30)
Flat shape (small), sideview Flat shape (small), flat-view
E32-T25Y
E32-T25Z
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Through-beam Fiber Units
Type Appearance (mm) Sensing distance (mm) Min. Standard object bending (min. sensing radius object) (mm) (mm) Features Model number
screw
E32-T11
Standard size
dia.
(180)
(0.005 dia.)
3-dia. cylinder
E32-T12B
Break-resistant
Flat shape
E32-T15XB
Standard models
(45)
screw (small) 2-dia. cylinder (small) 1.5-dia. cylinder (small) Flat shape (small)
E32-T21
Small size
E32-T221B
dia.
(0.005 dia.)
E32-T22B
dia.
(35)
E32-T25XB
Coating
(180)
dia. (0.005 dia.)
screw, fluorine coating Large built-in lens, screw screw
E32-T11U
20,000*3 20,000*3 10,000 (4,000) 4,000*4 4,000*4 2,600 (1,500) 4,000*4 3,700 2,400 (970)
dia.
E32-T17L E32-TC200+ E39-F1 E32-T11R+ E39-F1
Long-distance, high-power
Special-beam models
dia. (0.1 dia.)
screw, flexible fiber
4,000*4 3,600 2,300 (930) 4,000*4 3,400 2,250 (900)
screw, E32-T11+ break-resistant E39-F1
Screw mounting, side-view
E32-T14
screw
E32-T11L
1,700 1,330 (350)
dia. (0.01 dia.) 3-dia. cylinder E32-T12L
dia.
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting. optical fiber long each side, sensing distance 20,000 optical fiber long each side, sensing distance 4,000
Through-beam Fiber Units
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
Standard object Min. bend(min. sensing radius object) (mm)*1 (mm)
Features screw, side-view screw, side-view, flexible fiber screw, side-view, break-resistant screw (small)
Model number E32-T11L+ E39-F2 E32-T11R+ E39-F2
(180)
Long-distance, high-power
(100)
dia. (0.1 dia.)
(160)
dia. (0.005 dia.)
E32-T11+ E39-F2
E32-T21L
(100)
2-dia. cylinder E32-T22L (small)
dia.
Ultracompact, thin-sleeve
dia.
(30) (10) 2,500 1,900 1,250 (500) 1,750 1,300 (350) 1,100 (220)
dia. (0.005 dia.) 0.25 dia. (0.005 dia.) 0.125 dia. (0.005 dia.) dia. (0.005 dia.) dia. (0.1 dia.)
1-dia. cylinder, E32-T223R flexible fiber 0.5-dia. sleeve; 0.25dia. opening
dia. dia.
Sleeve cannot bent.
Special-beam models
E32-T33-S5
dia. 0.25 dia.
Sleeve cannot bent.
0.25-dia. sleeve, 0.125- E32-T333-S5 dia. opening 0.22-dia. sleeve, 0.1dia. opening E32-T334-S5
dia. 0.22 dia.
Sleeve cannot bent.
Fine-beam
3-dia. cylinder E32-T22S
dia.
dia.
dia. (0.1 dia.)
3.5-dia. cylinE32-T24S der, side-view
(0.2 dia.)
E32-T16PR Area width: E32-T16P
Area-sensing
1,500 1,100 (300) (190)
1,300 1,000 (260)
Area width: sideview
E32-T16JR
E32-T16J
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting. This value which detection possible within sensing area, with sensing distance (The sensing object stationary.)
Through-beam Fiber Units
Type Appearance (mm) Sensing distance (mm)
1,700 1,300 (340)
Min. Standard object (min. sensing bending radius object) (mm)*1 (mm)
Features
Model number
(0.3 dia.)
E32-T16WR Area width: E32-T16W Area width: long distance
Special-beam models
Area-sensing
2,300 1,800 1,150 (450) 3,700 (0.6 dia.) 2,800 1,850 (740) (140)
E32-T16
dia. (0.1 dia)
Multi-point detecE32-M21 tion (4-head) Heat-resistant E32-T51 150°C Heat-resistant 150°C; sideE32-T54 view Heat-resistant E32-T81R-S 200°C Heat-resistant 200°C; sideview Heat-resistant 200°C, long distance Heat-resistant 200°C; Lshaped; long distance E32-T61-S+ E39-F2 E32-T61-S+ E39-F1
150°C*5
1,000 (200) (60) (70)
dia. (0.1 dia.)
dia.
dia. (0.005 dia.)
Heat-resistant
(120)
dia. (0.1 dia.)
4,000*7 dia. (0.1 dia.) 3,400 2,200 (900)
200°C*6
Environment-resistive models
dia.
1,750 dia. 1,300 (0.1 dia) (350)
E32-T84S-S
350°C*6
(120)
dia. (0.005 dia.)
2,500 2,000 1,300 (520) 4,000*7 3,000 2,000 (800)
Heat-resistant E32-T61-S 350°C Fluororesin cover, E32-T11F round head Fluororesin cover, E32-T12F long distance
dia.
dia. (0.1 dia.)
Chemical-resistant
dia.
dia.
(100)
dia. (0.1 dia.)
1,800 dia. (0.1 dia.) 1,400 (350)
Fluororesin cover, E32-T14F side-view Fluororesin cover, heat-resistant E32-T51F 150°C Fluororesin cover, heat-resistant E32-T81F-S 200°C
dia.
dia.
(190)
dia. (0.005 dia.)
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting. This value which detection possible within sensing area, with sensing distance (The sensing object stationary.) This value which detection possible within sensing area, with sensing distance give digital value 1,000. (The sensing object stationary.) continuous operation, products within temperature range of-40°C 130°C. maximum temperature that withstood varies with location. Refer dimensions diagrams details. optical fiber long each side, sensing distance 4,000
Through-beam Fiber Units
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
(50)
Standard object (min. sensing object) (mm) dia. (0.01 dia.)
Min. bending radius (mm)
Features screw, heatresistant 120°C screw, heatresistant 120°C, long distance L-shaped, heatresistant 120°C L-shaped, heatresistant 120°C, long distance L-shaped, heatresistant 200°C, long distance
Model number
E32-T51V
Environment-resistive models
Vacuum-resistant
1,350 1,000 (260) (35)
dia. (0.1 dia.) dia. (0.01 dia.)
E32-T51V E39-F1V
E32-T54V
(180)
dia. (0.1 dia.)
E32-T54V E39-F1V
(130)
dia. (0.1 dia.)
E32-T84SV
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values.
Flanges
Appearance (mm) Type Model number
Lens Units
Appearance (mm) Type E39-F1V Quantity Remarks Long-distance Lens Unit used E32T51V E32-T54V.
4-channel flange
E32-VF4
Mounting Brackets
1-channel flange E32-VF1 Appearance (mm) Type Quantity Remarks used E32T54V.
Fiber Units Atmospheric-pressure Side
Appearance (mm) Type Amplifier-Flange Connection Fiber
Indicates models that allow free cutting.
E39-L54V Model number E32-T10V
Ordering Information
Fiber Units with Reflective Sensors
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
(Min. sensing Min. bending object) (mm) radius (mm)
Features screw
Model number E32-D11R
3-dia. cylinder
dia.
E32-D12R
(50)
Flat shape screw, with sleeve
E32-D15XR E32-DC200BR E32-DC200B4R
Standard size
Sleeve cannot bent. dia.
dia.
(14)
6-dia. cylinder, side-view Flat shape, side-view Flat shape, flat-view (0.005 dia.)
E32-D14LR
Flexible (new standard)
Standard models
(12)
E32-D15YR
E32-D15ZR
screw (small) screw (small)
E32-D211R
E32-D21R
dia.
3-dia. cylinder (small) Flat panel (small) screw (small), with sleeve
E32-D22R
Small size
E32-D25XR E32-DC200FR E32-DC200F4R
Min. bending dia. radius sleeve:
dia.
2-dia. cylinder (small), side-view Flat shape (small), side-view Flat shape (small), flat-view
E32-D24R
E32-D25YR
E32-D25ZR
sensing distances white paper. values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Fiber Units with Reflective Sensors
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
Min. (Min. sensing bending object) (mm) radius (mm)
Features
Model number
(90)
screw
E32-DC200
dia.
(70)
3-dia. cylinder
E32-D12
Flat shape
E32-D15X
Standard size
E32-DC200B4
Sleeve cannot bent.
(40)
(90)
dia.
screw, with sleeve
E32-DC200B E32-DC200B4
dia.
(36)
6-dia. cylinder, side-view Flat shape, side-view Flat shape, flat-view (0.005 dia.) screw (small) screw (small) 3-dia. cylinder (small) Flat shape (small) screw (small), with sleeve 2-dia. cylinder (small), side-view Flat shape (small), side-view Flat shape (small), flat-view
E32-D14L
(30)
E32-D15Y
Standard models
E32-D15Z
Standard
E32-D211
E32-DC200E
dia.
(22)
E32-D22
E32-D25X
Small size
E32-DC200F4
Min. bending radius sleeve:
(40)
dia.
E32-DC200F E32-DC200F4
dia.
E32-D24
E32-D25Y
E32-D25Z
sensing distances white paper. values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Fiber Units with Reflective Sensors
Min. (Min. sensing bending object) (mm) radius (mm)
Type
Appearance (mm)
Sensing distance (mm)
Features
Model number
Standard size
screw
E32-D11
(50)
Flat shape screw (small) (0.005 dia.)
E32-D15XB
Break-resistant
E32-D21B
Standard models
(20)
3-dia. cylinder (small) screw (small)
E32-D221B
dia.
Small size
E32-D21
dia.
1.5-dia. cylinder E32-D22B (small) Flat shape (small) E32-D25XB
(15) (50) 1,000 240)
Coating
(0.005 dia.)
screw, fluorine coating Large built-in lens, screw mounting screw
E32-D11U
Long-distance, high-power
E32-D16
17.5
(110)
E32-D11L
Special-beam models
screw
E32-D21L
(35)
3-dia. cylinder (0.005 dia.) E32-D22L
dia.
Ultracompact, thin-sleeve
dia. dia. Sleeve cannot bent.
0.8-dia. sleeve
E32-D33
dia. dia. Sleeve cannot bent.
(0.8)
0.5-dia. sleeve
E32-D331
sensing distances white paper. values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Fiber Units with Reflective Sensors
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
Min. (Min. sensing bending object) (mm) radius (mm)
Features
Model number
(45)
E32-CC200R screw E32-CC200
(90) (45)
3-dia. cylinder screw (small) 2-dia. cylinder (small)
E32-D32L
dia.
E32-C31
(22)
E32-D32 E32-C42+ E39-F3A E32-D32+ E39-F3A E32-C41+ E39-F3A-5
dia.
Coaxial, small-spot
spot diameter: Spot diameter distances range Spot diameter (0.005 dia.)
Small spot (variable)
Special-beam models
Small spot Spot diameter Spot diameter Spot diameter Spot diameter max. distances range Long distance, small spot E32-C31+ E39-F3A-5 E32-C41+ E39-F3B E32-C31+ E39-F3B
4-dia. spot
Long-distance E32-C31+ sensing, parallel E39-F3C light
Area-sensing
(45)
(0.005 dia.)
Beam width:
E32-D36P1
Retroreflective
E39-R3 Reflector
250) 1,500 1,500 1,500 (150 1,500)
(0.1 dia.)
screw
E32-R21+ E39-R3 (Attached)
(0.2 dia.)
E39-R3 Reflector
E32-R16+ Screw mounting, E39-R1 long distance (Attached)
sensing distances white paper. values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Fiber Units with Reflective Sensors
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
Min. (Min. sensing bending object) (mm) radius (mm)
Features
Model number
(3.3)
Small level differences, high E32-L25 power, side-view Small level differences, topview Ultracompact, flat-view E32-L25A
Special-beam models
Convergent-reflective
(center: (center: (center: (center: 7.2) (center: 7.2) (5.4 (center: 7.2)
E32-L24S
(0.005 dia.)
Heat resistant 105°C top-view Heat resistant 105°C top-view
E32-L24L
E32-L25L
Heat resistant 200°C, flat- E32-L86 view Wide-range sensing, flatview Heat resistant 150°C Heat resistant 200°C Heat resistant 350°C E32-L16
150°C*5
Heat-resistant
(72)
E32-D51 E32-D81R-S E32-D81R E32-D61-S E32-D61 E32-D73-S E32-D73
Environment-resistive models
200°C*6
(27)
(0.005 dia.)
350°C*6
400°C*6
1.25 dia. Min. bending radius sleeve:
(18) (30)
Heat resistant 400°C, with sleeve
Chemical-resistant
dia.
Fluororesin covE32-D12F long distance (0.005 dia.) Fluororesin covE32-D14F side-view
dia.
(10)
sensing distances white paper. values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting. continuous operation, products within temperature range -40°C 90°C. continuous operation, products within temperature range -40°C 130°C. maximum temperature that withstood varies with location. Refer dimensions diagrams details. Confirm applicable Amplifier Units before placing order. (Refer Precautions Correct Use.)
Ordering Information
Application-corresponding Fiber Units
High-resolution mode Standard mode High-speed mode *When used combination with E3X-DA-S Amplifier Unit (general-purpose). Super-high-speed mode)
Type
Appearance (mm)
Sensing distance (mm)
(10) 4,500 3,400 2,250 (900)
Standard object Min. bend(min. sensing radius object) (mm)*1 (mm)
Features
Model number
Label-detection
dia. (0.1 dia.)
Slot sensor adjustment optical E32-G14 axis required) Screw mounting, side-view E32-T14
Applicable tube: Transparent tube with diameter range recommended wall thickness Applicable tube: Transparent tube restriction diameter)
Compact
restriction tube diameter, resistant bubbles drops water
E32-L25T
E32-D36T
Liquid-level detection
Applicable tube: Transparent tube with diameter 3.2, 6.4, recommended wall thickness Applicable tube: Transparent tube with diameter range recommended wall thickness
Application-corresponding models
Light when fluid present, resistant E32-A01 bubbles drops water Light when fluid present, resisE32-A02 tant bubbles drops water
Liquid-contact models
Heat resistant 200°C, fluororesin cover
E32-D82F1 E32-D82F2
Glass-substrate-alignment
E32-L16 Variation detection position within E32-A08 detection range: E32-A07E1 E32-A07E2 Heat resistant 300°C Resistant tilting Heat resistant 150°C Heat resistant 300°C E32-L66
Soda glass with reflection factor
Glass-substrate-mapping
(center: (center: (center:
Edge soda glass with reflection factor rounded edge)
E32-A09
E32-A09H
(center: (center: (center:
E32-A09H2
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
continuous operation, products within temperature range -40°C 130°C. maximum temperature that withstood varies with location. Refer dimensions diagrams details. These values based assumption that there repeated sudden changes temperature. characteristics sensing object incline different between Attachments with model numbers ending "E1" "E2." Refer page installation precautions.
Application-corresponding Fiber Units
Type Appearance (mm) Sensing distance (mm) Standard object Min. bend(min. sensing radius object) (mm)*1 (mm) Features Model number
dia.
1,150 (250)
dia. (0.1 dia.)
Opening angle: 1.5°; optical axis adjusted E32-A03 before delivery Opening angle: 1.5°; with mounting flange; optical axis E32-A03-1 adjusted before delivery Long distance; opening angle: E32-T24S
Application-corresponding models
dia.
Wafer-mapping
dia.
1,750 1,300 (350)
dia.
dia.
(100)
dia. (0.1 dia.)
Ultraslim mm); opening angle: E32-A04 optical axis adjusted before delivery Ultraslim mm); opening angle: with mounting E32-A04-1 flange; optical axis adjusted before delivery
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. Indicates models that allow free cutting.
Accessories
Lens Units
Sensing distance (mm) Type Appearance Applicable Fiber Units HighStandard resolution mode mode 4,000*2 4,000*2 4,000*2 4,000*2 4,000*2 2,650 4,000*2 3,200 4,000*2 3,700 3,600 3,600 2,100 3,400 Highspeed mode 2,100 2,600 2,400 2,300 2,300 1,300 2,200 Superhighspeed mode 1,500 Long-distance sensing; opening angle: dia. (0.1 dia.) E39-F1 (heat resistant 200°C) Side-view, space-saving dia. (0.1 dia.) (heat resistant 200°C) Long distance reflection (heat E39-F3 resistant 200°C) Standard object (min. sensing object) (mm) Features Model number
*When used combination with E3X-DA-S Amplifier Unit (general-purpose).
E32-T11L
Long-distance Lens Units
E32-TC200 E32-T11R E32-T11 E32-T11U E32-T81R-S E32-T61-S E32-T11L E32-TC200
Through-beam Lens Units
Side-view Units
E32-T11R E32-T11 E32-T11U E32-T81R-S E32-T61-S E32-T11L E32-TC200 E32-T11R E32-T11 E32-T11U E32-T81R-S E32-T61-S E32-C42 E32-D32
E39-F2
Reflection Units
Reflective Lens Units
Spot diameter variable range distances range Small spot Spot diameter variable range distances (variable) range 0.1-dia. spot distance 0.5-dia. spot distance 0.2-dia. spot distance 0.5-dia. spot distance Spot diameter max. distances range Small spot
E39-F3A
Small-spot Lens Units
E32-C41 E32-C31 E32-C41 E32-C31 E32-C31 E32-C41
E39-F3A-5
Long distance, E39-F3B small spot Long-distance sensing, paral- E39-F3C light
values minimum sensing object representative values that indicate values obtained standard mode with sensing distance sensitivity optimum values. optical fiber long each side, sensing distance 4,000
Accessories
Protective Spiral Tube
Appearance Application Applicable Fiber Units M3-screw models E32-D21@ E32-DC200E E32-DC200F@ E32-C31 M3-screw models E32-T21@ (Except E32-T21R.) E32-TC200E E32-TC200F@ Fiber protection M4-screw models E32-T11@ E32-TC200 E32-TC200B@ E32-T51 M6-screw models E32-D11@ E32-DC200 E32-DC200B E32-CC200@ E32-D51 Tube length Model number E39-F32A5 E39-F32A E39-F32B5 E39-F32B E39-F32C5 E39-F32C E39-F32D5
E39-F32D
Note: Before using Protective Spiral Tube, remove protective tube that protects area between head optical fiber provided with some models.
Other Accessories
Appearance
Application
Name
Applicable Fiber Units
Remarks
Model number
Used fiber.
Cutter
Fiber Units that allow free cutting
Provided with applicable Fiber Units.
E39-F4
Attachments inserting thin fibers into Amplifier Units
Thin-fiber Attachments
Fiber Units that allow free cutting have 1.0-dia. sheath
Provided with applicable Fiber Units.
E39-F9
Used extend fibers.
Fiber Units that allow free cutting have 2.2-dia. sheath
E39-F10
Fiber Connectors Easy-to-use, onetouch relay connectors Fiber Units that allow free cutting
E39-F13: Used Fiber Units with 2.2dia. sheath. E39-F14: Used Fiber Units with 1.0dia. sheath. E39-F15: Used Fiber Units with sheath diameter between
E39-F13 E39-F14 E39-F15
Used bends sleeves.
Sleeve Bender
E32-TC200B(4) E32-TC200F(4) E32-DC200F(4)
E39-F11
Ratings/Characteristics
Fiber Units
Type Item E32-T1@R E32-D1@R Ambient operating -40°C 70°C temperature range Ambient humidity range Fiber material Plastic (PVC coating) Plastic (polyethylene coating) Plastic (PVC coating) Plastic (fluororesin coating) Flexible E32-T2@R E32-D2@R Standard Break-resistant Fluorine-coating Standard models
Degree protection standard: IP67 Type Item Long-distance, high-power other models E32-D16 Special-beam models Ultracompact, ultrafine-sleeve Coaxial, small-spot Fine-beam (narrow vision field)
Ambient operating -40°C 70°C temperature range Ambient humidity range Plastic (polyethylene Plastic (combination PVC, polyethylene, Fiber material Plastic (PVC coating) coating) polyolefin sheaths) Degree protection standard: IP67 Type Item other models Ambient operating -40°C 70°C temperature range Ambient humidity range Fiber material Plastic (PVC coating) Area-sensing E32-D36P1 E32-T16 E32-T16W(R) -25°C 55°C standard: IP40 standard: IP67 Special-beam models
Plastic (PVC coating) standard: IP50
Retroreflective E32-R21 -40°C 70°C E32-R16 -25°C 55°C
Plastic (polyethylene Plastic (PVC coating) Plastic (polyethylene coating) coating) standard: IP67 Special-beam models Convergent-reflective standard: IP66
Degree protection standard: IP50 (IP67 E32-T16) Type Item other models Ambient operating -40°C 70°C temperature range Ambient humidity range Fiber material Plastic (polyethylene coating)
E32-L25L E32-L24L -40°C 105°C
E32-L86 -40°C 200°C
Glass (SUS spiral coating)
Degree protection standard: IP50 (IP40 E32-L24S, E32-L16, E32-L86)
There must icing condensation within range specified ambient operating temperature. continuous operation, products within temperature range -40°C 90°C. maximum temperature that withstood varies with location. Refer dimensions diagrams details.
Fiber Units
Type Item E32-T5@ E32-D5@ Ambient operating -40°C 150°C temperature range Ambient humidity range Plastic Fiber material (fluororesin coating) Degree protection standard: IP67 Type Item other models Ambient operating -40°C 70°C temperature range Ambient humidity range Fiber material Environment-resistive models Chemical-resistant E32-T51F -40°C 150°C E32-T81F-S -40°C 200°C Vacuum-resistant other models -25°C 120°C 32-T84SV -25°C 200°C E32-T8@R-S E32-D8@R-S -40°C 200°C Environment-resistive models Heat-resistant E32-T84S-S E32-T6@-S E32-D6@-S -60°C 350°C E32-D73-S -40°C 400°C
Glass (fluororesin coating)
Glass (SUS spiral coating)
Plastic (fluororesin coating)
Glass (fluororesin coating)
Glass (fluororesin coating)
Glass (SUS spiral coating)
Degree protection standard: IP67 Type Item Label-detection
Application-corresponding models Liquid-level detection other models E32-A01 E32-A02 E32-D82F -40°C 200°C Wafer-mapping -40°C 70°C
Ambient operating -40°C 70°C temperature range Ambient humidity range Fiber material Plastic (polyethylene coating) standard: IP50 Repeat accuracy: max. Type Item Glass-substrate-alignment other models E32-L66 E32-A09 -40°C 70°C Plastic (fluororesin coating)
(Fluororesin coating) standard: IP68 Repeat accuracy: max.
Plastic (polyethylene coating) standard: IP50
Degree protection standard: IP67 Other
Application-corresponding models Glass-substrate-mapping E32-A09H -40°C 150°C E32-A09H2 -40°C 300°C
Ambient operating -40°C 70°C 300°C temperature range Ambient humidity range Glass Plastic Fiber material (polyethylene coating) (SUS spiral coating) Degree protection standard: IP40
Plastic Plastic (polyethylene coating) (fluororesin coating)
Glass (SUS spiral coating)
There must icing condensation within range specified ambient operating temperature. continuous operation, products within temperature range -40°C 90°C. maximum temperature that withstood varies with location. Refer dimensions diagrams details. continuous operation, products within temperature range -40°C 130°C. These values based assumption that there repeated sudden changes temperature.
Dimensions
Standard/Flexible Models E32-TC200 E32-T11R
dia. M2.6 0.45
(Unit:
Through-beam Fiber Units Through-beam models consist parts: emitter receiver.
Indicates models that allow free cutting.
E32-TC200E
hexagonal nuts toothed washers Sensing head: 0.7* Optical fiber: dia. hexagonal nuts toothed washers Sensing head: 0.5* Optical fiber: dia.
dia.
2,000 *Material: Brass/nickel plating
Fiber Attachment (E39-F9) 2,000 *Material: Brass/nickel plating
E32-TC200A E32-T21R
dia.*1 hexagonal nuts toothed washers Sensing head: 0.5*2 Optical fiber: dia.
E32-T22 E32-T22R
Heat-shrinkable tube dia. dia. Sensing head* dia. Optical fiber: dia.
13.5
dia. 2,000 E32-T21R: dia. Material: Brass/nickel plating
Fiber Attachment (E39-F9) 2,000 *Material: Stainless steel (SUS303)
E32-T12 E32-T12R
dia. dia. Sensing head: dia.* Optical fiber: dia.
E32-T222 E32-T222R
dia. (14) 2,000 *Material: Brass/nickel plating dia. 2,000 *Material: Brass/nickel plating Fiber Attachment (E39-F9) Sensing head* Optical fiber: dia.
E32-T15X E32-T15XR
Sensing head* Sensing surface dia. 2,000 Optical fiber: Two, dia.
E32-T25X E32-T25XR
Sensing surface: Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides *Material: Aluminum Sensing head* 2,000 Optical fiber: dia.
Fiber Attachment (E39-F9) *Material: Aluminum
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
E32-TC200B (B4) E32-TC200BR (B4R)
Stainlesssteel tube dia. dia. max. (SUS304) hexagonal nuts toothed washers Sensing head: (coarse thread) Optical fiber: dia.
E32-TC200(F4) E32-TC200FR(F4R)
Stainless0.5 dia. dia. steel tube (SUS304) max. hexagonal nuts toothed washers Sensing head: Optical fiber: dia.
(40)*1
2,000 E32-TC200B4 Material: Brass/nickel plating
(40)*1
Fiber Attachment (E39-F9) 2,000 E32-TC200F4 Material: Brass/nickel plating
E32-T14L E32-T14LR
Sensing head: dia.* Heat-shrinkable tube dia. 2,000 Optical fiber: dia.
E32-T24 E32-T24R
Fiber Attachment (E39-F9) Stainless-steel Heat-shrinkable tube tube: dia. Sensing head: dia.* dia. Optical fiber: dia.
2,000 *Material: Stainless steel (SUS304)
Sensing surface
*Material: Stainless steel (SUS304)
Standard/Flexible Models E32-T15Y E32-T15YR
Sensing surface
Through-beam Fiber Units
E32-T25Y E32-T25YR
2,000 Sensing surface Optical fiber: Two, dia. *Material: Aluminum Fiber Attachment (E39-F9) *Material: Aluminum 2,000 Optical fiber: dia.
Sensing head*
Sensing head*
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
E32-T15Z E32-T15ZR
Sensing surface Sensing head*
2,000
E32-T25Z E32-T25ZR
*Material: Aluminum
Sensing surface Sensing head*
2,000 Optical fiber: dia.
Optical fiber: 2.2. dia.
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Fiber Attachment (E39-F9) *Material: Aluminum
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
Break-resistant/Coated Models E32-T11 E32-T11U E32-T21
Sensing head: hexagonal nuts 0.5* toothed washers Four, 0.25 dia. Protective tube Optical fiber: dia.
Sensing head: hexagonal nuts 0.7* toothed washers Sixteen, 0.265 dia. Protective tube M2.6 0.45
Optical fiber: dia.
(14)
2,000 *Material: Brass/nickel plating
Fiber Attachment (E39-F9) 2,000 *Material: Brass/nickel plating
E32-T12B
Sixteen, 0.265 dia. dia. Sensing head: dia.* Optical fiber: dia.
E32-T221B
Four, 0.25 dia. dia. Sensing head* dia. (14) 2,000 *Material: Brass/nickel plating Heat-shrinkable tube Optical fiber: dia.
Fiber Attachment (E39-F9) 2,000 *Material: Stainless steel (SUS303)
E32-T22B
Four, 0.25 dia. Sensing head* Optical fiber: dia.
dia. 2,000
Fiber Attachment (E39-F9) *Material: Brass/nickel plating
E32-T15XB
Sensing head* Sensing surface: Sixteen, 0.265 dia. 2,000 Optical fiber: dia.
E32-T25XB
Sensing surface: Four, 0.25 dia. Sensing head* 2,000 Optical fiber: dia.
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
*Material: Aluminum
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Fiber Attachment (E39-F9) *Material: Aluminum
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
Note: symmetrical parts. Mounting screws (countersunk screw pcs) included
Through-beam Fiber Units
Long-distance/High-power Models E32-T17L
Sensing head: Lens: dia. (PMMA) hexagonal nuts
Indicates models that allow free cutting.
E32-T14
Optical fiber: 2.2. dia. R3.5
Lens (PMMA) dia. Optical axis
Heat-resistant Nitrile rubber
Two, dia.
Optical fiber: dia.
10,000 *Material:
10.5
10±0.2 11.2 2,000
E32-T11L
dia. M2.6 0.45 hexagonal nuts toothed washers Sensing head: 0.7* Optical fiber: 2.2. dia.
E32-T12L
dia. dia. Sensing head: dia.* Optical fiber: 2.2. dia.
(14)
(14) 2,000 *Material: Brass/nickel plating
2,000 *Material: Brass/nickel plating
E32-T21L
dia. hexagonal nuts toothed washers Sensing head: 0.5* Optical fiber: dia.
E32-T22L
dia. dia. Sensing head: dia.* Heat-shrinkable tube Optical fiber: dia.
(1.7)
Fiber Attachment (E39-F9) 2,000 *Material: Brass/nickel plating
Fiber Attachment (E39-F9) 2,000 *Material: Stainless steel
Ultracompact/Thin-sleeve Models E32-T223R
2,000 dia. Optical fiber: dia. (0.5) 0.25 dia. dia. Fiber Attachment (E39-F9) Optical fiber: dia.
E32-T33-S5
1,000
dia.
Sensing head*
dia. Sensing head*
Heat-shrinkable tube
Fiber Attachment (E39-F9) *Material: Stainless steel
*Material: Stainless steel
E32-T333-S5
0.125 dia. 1,000 Optical fiber: dia.
E32-T334-S5
dia. 1,000 Optical fiber: dia.
0.25 dia. dia. Heat-shrinkable tube Sensing head*
Fiber Attachment (E39-F9) *Material: Stainless steel
0.22 dia. dia. Heat-shrinkable tube Sensing head*
Fiber Attachment (E39-F9)
Note: Fiber Attachment attached with adhesive cannot removed.
Note: Fiber Attachment attached with adhesive cannot removed. *Material: Stainless steel
Through-beam Fiber Units
Fine-beam (narrow vision field) Models E32-T22S
dia. dia. 2,000 *Material: Brass/nickel plating Sensing head* Optical fiber: dia.
E32-T24S
Sensing head* 17.6 dia. Optical fiber: dia.
Area-sensing Models E32-T16W E32-T16WR
18.5 Sensing surface
20.5 dia.
Mounting bracket (provided accessory) 2,000
Sensing surface
*Material: Brass/nickel plating
E32-M21
Optical axis
Sensing head: 0.35
hexagonal nuts toothed washers Silicon tube
Four, 1-dia. plastic fibers
silicon tubes black other gray. this difference distinguish between emission reception sides. Material: Stainless steel (SUS303) Sleeve
Sensing head* Two, 3.2-dia. mounting holes with 6-dia. countersinks 2,000
Optical fiber: dia.
*Material: (sensing surface: PMMA)
2,000
E32-T16P E32-T16PR
E32-T16J E32-T16JR
Receiver Sensing surface
E32-T16
Two, dia. 6-dia. countersink 14.5 10.7 Optical axis
Emitter 14.5 10.7 Sensing surface
15.5 8.85
Sensing head*1
Optical axis
Sensing surface
Lens*
Optical axis
Sensing head*1
Two, 3.2-dia. holes with 6-dia. countersinks
Sensing head* Optical fiber: dia. 2000
dia.
Sensing surface (PMMA)
2,000
2,000
Optical fiber: dia. Material: Heat-resistant (sensing surface: PMMA) Provided with stickers with slits width each).
*Material: sensing head PMMA lens.
Optical fiber: dia. Material: Heat-resistant (sensing surface: PMMA) Provided with stickers with slits width each).
Heat-resistant Models E32-T51
dia. hexagonal nuts toothed washers Sensing head: 0.7* Optical fiber: dia.
E32-T54
Sensing surface dia. Sensing head: dia.* Optical fiber: dia.
2.85 dia.
2,000 *Material: Brass/nickel plating
2,000 *Material: Stainless steel (SUS303)
Note: maximum allowable temperature 150°C. maximum allowable temperature continuous operation 130°C.
Note: maximum allowable temperature 150°C. maximum allowable temperature continuous operation 130°C.
Through-beam Fiber Units
Heat-resistant Models E32-T81R-S
M2.6 0.45 hexagonal nuts toothed washers Sensing head: Protective tube dia. dia. Fluororesin tube dia. Sleeve dia. Material: Stainless steel (SUS303) 2,000
Indicates models that allow free cutting.
dia.
(75) dia.
Note: maximum allowable temperatures sections 200°C 110°C, respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
E32-T84S-S
(14.2) 2,000
E32-T61-S
dia. Flexible tube: dia. (stainless steel) hexagonal nuts Hexagonal caulking toothed washers dia. Sleeve dia. M2.6 0.45 Sensing head:
max.
dia.
dia.
Flexible tube: dia. (stainless steel)
dia.
Sleeve
dia. Antislip tread
dia. 2,000
dia. Sensing head dia.
Material: Stainless steel (SUS303)
Material: Stainless steel (SUS303) diameter fiber length exceeds
Lens dia.)
Note: maximum allowable temperatures sections 200°C 110°C, respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Note: maximum allowable temperatures sections 200°C 110°C, respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Chemical-resistant Models E32-T11F
Lens: dia. Sensing head Optical fiber: dia. dia. Lens: dia. Sensing head: dia. Fluororesin dia. Optical fiber: dia.
E32-T12F
R3.6
19.8 (35)
2,000 Material: Sheath material: Fluororesin
2,000
E32-T14F
Sensing head: dia. Fluororesin dia. Optical fiber: dia.
E32-T51F
2,000 Lens: dia. (20)
Optical axis (21) 2,000
Fluororesin Sensing head: dia.
Optical fiber: dia.
E32-T81F-S
cover
dia.
(R6)
Protective tube
tube dia.
dia. Sleeve
dia.
dia.
(0.8)
(70) 2,000
Note: maximum allowable temperatures sections 200°C 110°C, respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Through-beam Fiber Units
Vacuum-resistant Models E32-T51V
1.15 dia. M2.6 0.45 nuts spring washers
E32-T54V
1.15 dia.
dia.
Optical fiber: dia.
dia.
dia.
M2.6 0.45
dia.
(15)
1,000
(30) 1,000
Connected flange (vacuum side) *Material: Aluminum
dia. dia.
dia.
dia.
dia.
Connected flange (vacuum side) *Material: Stainless steel (SUS304)
E32-T84SV
Lens dia.)
E39-F1V
1,000
Sensing head: dia.* (14.2)
0.5-dia. hole dia.
dia. dia. dia. Flexible tube (stainless steel): dia. dia. dia.
max.
M2.6 0.45 Effective depth: Spot-facing depth:
Connected flange (vacuum side) *Material: Stainless steel (SUS304)
E32-VF4
dia.
Four, dia.
dia. dia.
E32-VF1
(96) (63)
(23)
dia.
(33.53)
Flange O-ring Flange dia.
Two, connectors spring O-ring washer
Note Perform mounting that O-ring atmosphericpressure side vacuum chamber wall. Mounting-hole cutout dimensions: dia. ±0.5
Note Perform mounting that O-ring atmospheric-pressure side vacuum chamber wall. Mounting-hole cutout dimensions: 14.5 dia. ±0.2
Dimensions
Fiber Units with Reflective Sensors
Standard/Flexible Models E32-DC200 E32-D11R
Two, dia. dia. hexagonal nuts toothed washers Sensing head* 0.75 Optical fiber: Two, dia.
(Unit:
Indicates models that allow free cutting.
E32-D211 E32-D211R
Two, dia.
Fiber Attachments (E39-F9) hexagonal nuts toothed washers Sensing head: 0.7* Optical fiber: Two, dia.
2,000 *Material:
2,000 *Material: Stainless steel (SUS303)
E32-DC200E E32-D21R
Two, dia.
Fiber Attachments (E39-F9) hexagonal nuts toothed washers Sensing head: 0.5* Optical fiber: Two, dia.
2,000 *Material: Stainless steel (SUS304)
E32-D12 E32-D12R
2,000 Two, dia. dia.
E32-D22 E32-D22R
Two, dia.
Fiber Attachments (E39-F9) Optical fiber: Sensing head: dia.* Two, dia. dia.
Sensing head*
Heat-shrinkable tube
Optical fiber: Two, dia. *Material: Stainless steel (SUS304)
2,000 *Material: Brass/nickel plating
E32-D15X E32-D15XR
Sensing head*
2,000 Optical fiber: Two, dia.
E32-D25X E32-D25XR
Sensing head*
2,000 Optical fiber: Two, dia.
Sensing surface: Two, dia.
Fiber Attachments (E39-F9)
*Material: Aluminum
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Note: Mounting screws (countersunk screw pcs) included
Sensing surface: Two, dia. Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
*Material: Aluminum
Note: Mounting screws (countersunk screw pcs) included
E32-DC200B(B4) E32-DC200BR(B4R)
Two, dia. Stainless-steel tube (SUS304) dia. max. hexagonal nuts toothed washers Sensing head: 0.75 Optical fiber: Two, dia. (fine thread)
E32-DC200F(F4) E32-DC200FR(F4R)
Fiber Attachments (E39-F9) hexagonal nuts StainlessTwo toothed washers Sensing head: Two, dia. dia. steel tube max. (SUS304) Optical fiber: Two, dia.
(40)*1 2,000 E32-DC200B4 Material: Brass/nickel plating
(40)*1
2,000 E32-DC200F4 Material: Stainless steel (SUS304)
E32-D14L E32-D14LR
Sensing head* dia. Light baffle 2,000 Heat-shrinkable tube Optical fiber: Two, dia.
E32-D24 E32-D24R
Fiber Attachments (E39-F9) Stainless-steel tube: dia. Sensing head: dia.* Optical fiber: Heat-shrinkable tube Two, dia.
Sensing surface 2,000
Light baffle
Sensing surface
*Material: Stainless steel (SUS304)
*Material: Stainless steel (SUS304)
Fiber Units with Reflective Sensors
Standard/Flexible Models E32-D15Y E32-D15YR
Sensing surface Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides Optical fiber: Two, dia. Sensing head* 2,000
E32-D25Y E32-D25YR
Sensing surface Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks
Sensing head*
2,000 Optical fiber: Two, dia.
Fiber Attachments (E39-F9)
Note: Mounting screws (countersunk screw pcs) included
*Material: Aluminum
Note: Mounting screws (countersunk screw pcs) included
*Material: Aluminum
E32-D15Z E32-D15ZR
Sensing head* Sensing surface Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides 2,000 Optical fiber: Two, dia.
E32-D25Z E32-D25ZR
Sensing head* Sensing surface *Material: Aluminum
2,000 Optical fiber: Two, dia.
Fiber Attachments (E39-F9)
*Material: Aluminum
Note: Mounting screws (countersunk screw pcs) included
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks
Note: Mounting screws (countersunk screw pcs) included
Break-resistant/Coated Models E32-D11 E32-D11U
Two, sixteen, hexagonal nuts 0.265 dia. Sensing head: toothed washers Protective tube 0.75* Optical fiber: Two, dia.
2,000 *Material: Brass/nickel plating
E32-D21B
Two, four, 0.25 dia. Fiber Attachments (E39-F9) hexagonal nuts toothed washers Sensing head: 0.7* Optical fiber: Two, dia.
E32-D21
hexagonal nuts Sensing head: toothed washers Four, 0.25 dia. 0.5* Protective tube Fiber Attachments (E39-F9) Optical fiber: Two, dia.
2,000 Material: Stainless steel (SUS303)
2,000 *Material: Brass/nickel plating
E32-D221B
Two, four, 0.25 dia. Fiber Attachments (E39-F9) Sensing head: dia. dia.* Optical fiber: Two, dia.
E32-D22B
Four, 0.25 dia. Sensing head Optical fiber: Brancher (ABS): dia. dia.
Attachment
dia. 2,000 *Material: Brass/nickel plating 2,000
Material: Stainless steel (SUS304) Note: Attachment attached with adhesive cannot removed.
E32-D15XB
Sensing head* Sensing surface: Two, sixteen, 0.265 dia. 2,000 Optical fiber: Two, dia.
E32-D25XB
Sensing head* *Material: Aluminum Fiber Attachments (E39-F9) *Material: Aluminum 2,000 Optical fiber: Two, dia.
Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks both sides
Note: Mounting screws (countersunk screw pcs) included
Sensing surface: Two, four, 0.25 dia. Two, 2.2-dia. mounting holes with two, 4.4-dia. countersinks
Note: Mounting screws (countersunk screw pcs) included
Fiber Units with Reflective Sensors
Long-distance/High-power Models E32-D16
Two, 5.8-dia lenses 2,000
Indicates models that allow free cutting.
E32-D11L
hexagonal nuts toothed washers Sensing head: 0.75*
Two, dia.
17.5 Optical axis Optical axis Optical fiber: Two, dia. *Material: Aluminum
dia.
Optical fiber: Two, dia.
Sensing head*
Two, 3.2-dia. mounting holes with 6-dia. countersinks
2,000 *Material: Brass/nickel plating
E32-D21L
Two, dia. Fiber Attachments (E39-F9) hexagonal nuts toothed washers Sensing head: 0.7* Optical fiber: Two, dia.
E32-D22L
Sensing head: Optical fiber: Two, dia. Two, dia. dia. dia.* Fiber Attachments (E39-F9)
2,000 *Material: Brass/nickel plating
2,000 *Material: Brass/nickel plating
Ultracompact/Thin-sleeve Models E32-D33
Fiber Attachments (E39-F9) Optical fiber: Two, dia.
E32-D331
Attachment Stainless-steel tube: dia. Two, 0.125 dia. Irraxtube: dia. Brancher: dia. Sensing head: dia.
Stainless-steel tube: dia. Sensing head: dia.* Two, 0.25 dia.
Heatshrinkable tube
2,000 *Material: Stainless steel (SUS303)
2,000
Material: Stainless steel (SUS303) Note: Attachment attached with adhesive cannot removed.
Coaxial/Small-spot Models E32-CC200 E32-CC200R
Sixteen, 0.25-dia. reception Emission fiber: fibers dia. dia. hexagonal nuts toothed washers Sensing head: 0.75* Optical fiber: dia.
E32-D32L
2,000 Emission fiber: dia. 1,570
Sixteen, 0.265-dia. reception fibers
2,000 *Material: Brass/nickel plating
Sensing head: dia.*
Brancher (heat-resistant, ABS, black): dia.
Optical fiber: dia.
*Material: Stainless steel (SUS304)
Note: There white line fiber that inserted emitter-side port.
Note: There yellow dotted line fiber that inserted emitter-side port.
E32-C31
hexagonal nuts Optical fiber: Emission fiber: Sensing head: toothed washers 0.5* Heat-shrinkable tube Two, dia. dia.
Fiber Attachments (E39-F9)
E32-D32
Sensing head: dia.* dia. Heat-shrinkable tube Fiber Attachments (E39-F9) Optical fiber: Two, dia.
Four, 0.25-dia. reception fibers
Emission fiber: dia.
2,000 *Material: Stainless steel (SUS303)
Note There white line cable fiber that inserted emitter-side port. core diameter sensing head assumed range 2.44 2.49
Four, 0.25-dia. reception fibers
2,000 *Material: Stainless steel (SUS303)
Note: There white line cable fiber that inserted emitter-side port.
E32-C41
0.175 dia. (emission fiber) toothed hexagonal washers nuts Irraxtube: dia. Brancher (ABS resin): dia.
Fiber White markings: Attachment Optical fiber: Emission side Two, dia. (heat-shrinkable tube)
E32-C42
0.175 dia. (emission fiber) Sensing head: dia.* dia. Irraxtube: dia. Brancher (ABS resin) dia.
White markings: Fiber Attachments Emission side (heat-shrinkable tube)
Optical fiber: Two, dia.
0.175 dia. (reception fibers) Sensing head: 0.5*
(100) 1,000 *Material: Stainless steel (SUS303)
0.175 dia. (reception fibers)
(100) 1,000 *Material: Stainless steel (SUS303)
Note: Fiber Attachment attached with adhesive cannot removed.
Note: Fiber Attachment attached with adhesive cannot removed.
Fiber Units with Reflective Sensors
Area-sensing Models E32-D36P1
2,000 Optical fiber: Two, dia.
Two, 3.2-dia. mounting holes 10.85 0.265 dia. (emission reception fibers alternating arrangement) Sensing head* *Material: Brass/nickel plating
Retroreflective Fiber Units E32-R21 E39-R3 Reflector provided accessory.)
Fiber Attachments hexagonal nuts Lens washers Silicon tube (PMMA) Sensing head* 0.75 Optical fiber: Two, dia. dia. 17.8 27.8 2,000 *Material:
E32-R16 E39-R1 Reflector provided accessory.)
Sensing head
21.5
15.2
Optical fiber: Two, dia. Standard length: Lens (PMMA) Two, screws (provided) Material:
Convergent-reflective Models E32-L24S
Two, 3.2-dia. mounting holes with 6-dia. countersinks both sides Optical axis Sensing head* *Material: Fiber Attachments (E39-F9)
E32-L16
22.5
2,000
Optical fiber: Two, dia.
2,000 Optical fiber: Two, dia. dia. dia.
Optical axis 0.75
Sensing head*
17.5
12.3
Two, 3.2-dia. mounting holes with 6-dia. countersinks both sides
*Material:
E32-L24L
Sensing distance Optical axis Two, 3.2-dia. lenses Optical fiber: Two, dia. Side-view prism (PC) Fiber Attachments (E39-F9)
E32-L25L
Two, 3.2-dia. lenses
Sensing distance Fiber Attachments (E39-F9) Optical fiber: Two, dia.
Sensing head* Two, 3.2-dia. mounting holes with 6-dia. countersinks both sides 2,000 *Material: Polycarbonate
Sensing head* Two, 3.2-dia. mounting holes with 6-dia. countersinks both sides 2,000 *Material: Polycarbonate
E32-L25
Sensing distance
E32-L25A
Sensing distance
Optical fiber: Two, dia.
Sensing head*
Sensing head* Two, 3.2-dia. holes with 6-dia. countersinks
Two, 3.2-dia. holes with 6-dia. countersinks
2,000 *Material: Heat-resistant
2,000 Optical fiber: Two, dia.
Note: There white line fiber that inserted emitter-side port.
Note: There white line fiber that inserted emitterside port.
*Material: Heat-resistant
Fiber Units with Reflective Sensors
Convergent-reflective Models E32-L86
Optical axis Two, dia. dia. Two, 3.2-dia. holes with 6-dia. countersinks side 33.5 2,000 (max.)
Indicates models that allow free cutting.
Note: maximum allowable temperatures sections respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Sensing head (stainless steel) Flexible tube: dia.*1 Material: Stainless steel
Heat-resistant Models E32-D51
Two, dia. hexagonal nuts toothed washers Sensing head: 0.75* Optical fiber: Two, dia.
2,000 *Material: Brass/nickel plating
Note: maximum allowable temperature maximum allowable temperature continuous operation
E32-D81R-S E32-D81R
Fiber: dia.
Using E32-D81R-S
toothed washers (SUS) hexagonal nuts (SUS) Sensing head: 0.75 flexible tube Protective tube (gray) (4.2 dia.) dia.
Using E32-D81R
SUS303 dia. Sleeve
dia. Sleeve
dia.
(70) 2,000
Note maximum allowable temperatures sections respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Confirm applicable Amplifier Units before placing order. (Refer Precautions Correct Use.)
11.5
16.5
Material: Stainless steel (SUS303)
E32-D61-S E32-D61
dia.
Using E32-D61-S
hexagonal nuts toothed washers Sensing head: 0.75 dia. dia. flexible tube dia. dia. Sleeve Hexagonal caulking dia.
Using E32-D61
SUS316L Sleeve
2,000
11.5
16.5
Note maximum allowable temperatures sections respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Confirm applicable Amplifier Units before placing order. (Refer Precautions Correct Use.)
Material: Stainless steel (SUS303) diameter fiber length exceeds diameter fiber length exceeds
E32-D73-S E32-D73
dia. Stainless-steel tube: 1.25 dia. 1.65 dia. dia.
Using E32-D73-S
hexagonal nuts toothed washers flexible tube Sensing head: dia. dia. dia.
Using E32-D73
Hexagonal caulking dia. SUS316L Sleeve
dia. Sleeve
2,000
11.5
Note maximum allowable temperatures sections respectively. section inserted into Amplifier Unit (indicated *2), how15 ever, must stay within Amplifier Unit's operating temperature range.
Confirm applicable Amplifier Units before placing order. (Refer Precautions Correct Use.)
16.5
Material: Stainless steel (SUS303)
Chemical-resistant Models E32-D12F
Sensing head: dia. Fluororesin dia. Optical fiber: Two, dia.
E32-D14F
2,000 (26) Fluororesin tube (protective cover)
2,000
Optical Sensing head: dia. axis Optical-axis mark
Optical fiber: dia.
Dimensions
Application-corresponding Fiber Units
Label-detection Models E32-G14
(Unit:
36.3 25.2 Sensing head*
2,000
R1.6
R1.6
Liquid-level Detection Models
R3.5 Lens (PMMA) Optical axis
E32-D36T
23.45 11.4 2,000
23.5
20.4 Eight, R0.5 Optical fiber: Two, dia. Emission side: Sixteen, 0.265 dia. Sensing head 13.25 Thirty-two, 0.265 dia.*
*Material:
Optical fiber: Two, dia.
Reception side: Sixteen, 0.265 dia.
E32-L25T
Two, 3.2-dia. lenses (PC) Fiber Attachments (E39-F9) (13) 15.2 Optical fiber: Two, dia.
Mounting hole Sensing head (PC)
2,000
E32-A01
Sensing head*
E32-A02
Sensing head*
Optical fiber: dia. Optical fiber: dia.
14.5
Tube holder Sensing surface Optical axis Receiver 5,000
Tube holder Sensing surface
Optical axis
5,000
19.9
*Material: sensing head, PMMA prism, pipe holder.
*Material: sensing head, PMMA prism, pipe holder.
Emitter
E32-D82F1 E32-D82F2
Sensing head (fluororesin): dia.
Fiber connector (brass/nickel plating): dia. dia. Optical fiber: Two, dia.
Note: maximum allowable temperatures sections 200°C 85°C, respectively.
Amplifier Unit Length unbendable section: (350) 2,000
2,000 1,500 from E32-D82F2 section optical fiber Amplifier-unit side plastic therefore allows free cutting.
Application-corresponding Fiber Units
Models Glass-substrate Alignment/Mapping E32-A08 E32-A07E1(E2)
24.5 10.7 2,000 Reception fiber: dia.
Indicates models that allow free cutting. E32-L66
21.7 2,000
Optical axis Two, 3.2-dia. mounting holes with four, 6-dia. countersinks
dia. dia. Sensing head Material: Stainless steel (SUS303)
Emission fiber: dia.
Two, 3.2-dia. mounting holes with 6-dia. countersinks
E32-A07E1(E2) reception fiber emission fiber. fiber with model display tube (fiber with blue dotted line) light emitting side.
Two, 2.8-dia. flexible tubes (stainless steel)
Note: maximum allowable temperatures sections 300°C 110°C, respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
E32-A09 E32-A09H
Optical axis 2,000
E32-A09H2
Optical axis
2,000 Two, 3.24-dia. mounting holes with four, 6-dia. countersinks
Lens: dia.
Optical fiber: Two, dia. Lens: dia. Two, 3.2-dia. mounting holes with 6-dia. countersinks *Material: Aluminum
Sensing head
2.8-dia. flexible tubes*
dia.
dia. dia. Material: Stainless steel
Sensing head*
Note: maximum allowable temperatures sections 300°C 110°C, respectively. section inserted into Amplifier Unit (indicated *2), however, must stay within Amplifier Unit's operating temperature range.
Wafer-mapping Models E32-A03
Two, R1.6 20.5 2,000
E32-A03-1
24.5 2,000 Optical fiber: dia. Stamp (1-mm dia.) Two, dia. Fiber Attachment (E39-F9)
17.6 dia. R1.6
Stamp (1-mm dia.)
dia.
Fiber Attachment (E39-F9)
18.5
Sensing head
dia. 12.5
E39-L83 Mounting Bracket (SUS)
*Material: Brass/nickel plating
Sensing surface
dia.
Sensing surface
Sensing head
*Material: Brass/nickel plating
Note: stamped surface opposing surface installation (reference) surfaces.
Note stamped surface opposing surface installation (reference) surfaces. symmetrical parts.
E32-A04
20.5 Four, R1.35 dia. dia. dia. Sensing head Stamp (1-mm dia.) Fiber Attachment (E39-F9) Stamp (1-mm dia.) 2,000 Optical fiber: dia.
E32-A04-1
dia. Installation (reference) surface Optical axis Sensing surface 2,000 Optical fiber: dia.
*Material: Stainless steel (SUS303) Sensing surface
Two, dia.
Fiber Attachment (E39-F9)
Note: stamped surface opposing surface installation (reference) surfaces.
Sensing head *Material: Stainless steel (SUS303)
Note: symmetrical parts.
Accessories
Lens Units Lens Units E39-F1
M2.6 0.45 Effective depth: Spot-facing depth: dia. Material: Brass body optical glass lens itself. dia.
Side-view Units E39-F2
M2.6 Effective depth: dia. Spot-facing depth:
Material: Brass body optical glass lens itself. Note: set.
Two, slotted-head screws*
Note: set.
Reflection Unit with Lens internally E39-F3 Two, dia. toothed washer
Two, dia.
Material: Brass body aluminum base.
8±0.2 20.7
angle-setting screw
*Secure fiber head with slotted-head screws. insert lens (E39-F1).
Lens Unit Reflective Fiber Units E39-F3A
Allen-head screw (for securing fiber) dia. dia. Lens surface (lens diameter:
Lens Unit Reflective Fiber Units E39-F3A-5
Straight knurling dia. dia. 16.5 Lens surface (lens diameter: dia. Effective screw length: dia.
Material: Aluminum body optical glass lens.
Note: This Lens Unit E32-D32 E32C42.
Material: Aluminum body optical glass lens
Note: This Lens Unit E32-C31 E32-C41.
Lens Unit Reflective Fiber Units E39-F3B
dia. dia. Lens surface (lens diameter: 24.1 25.2 Depth:
Lens Unit Reflective Fiber Units E39-F3C
dia. 10.9 Lens surface (lens diameter:
Straight knurling dia. Effective screw length:
Material: Aluminum body optical glass lens.
Note: This Lens Unit E32-C31 E32-C41.
Material: Aluminum body optical glass lens.
Note: This Lens Unit E32-C31 E32-C41.
Accessories
Protective Spiral Tubes E39-F32A/F32A5 E39-F32B/F32B5
0.5; depth: dia. Tube Material: Brass/nickel plating Material: Stainless steel (SUS304) Head connector (4.6 dia.) dia.
Note length 1,000 E39-F32A/-F32B E39-F32A5/-F32B5. E39-F32B(5) consists E39-F32A(5)s.
E39-F32C/F32C5
0.7; depth: dia. Tube Material: Brass/nickel plating Material: Stainless steel (SUS304) Head connector (5.6 dia.) dia.
Note: length 1,000 E39-F32C E39-F32C5.
E39-F32D/F32D5
0.75; depth: Head connector dia.
dia.)
dia.
Note: length 1,000 E39-F32D E39-F32D5.
Tube
Material: Brass/nickel plating Material: Stainless steel (SUS304)
Other Accessories Fiber Cutter E39-F4
Thin-fiber Attachments E39-F9
dia.
24.5
Mark indicating position insertion into Amplifier Unit (2.2 dia.)
Material:
dia.
Standard-fiber insertion hole Thin-fiber insertion hole
11.7
Note: set. *Provided with thin-fiber models.
Splice dia. 12.8 Material: Polyester Material: Brass Retention clip Fiber: dia.
Fiber Connector E39-F10
Retention Fiber: dia. clip dia.
Fiber Connector E39-F13 E39-F14 E39-F15
(48.6) 32.6 29.6
Note: Dimension varies with model number shown following table.
Four, dia. 33.8 22.4 20.4 27.4 Model E39-F13 E39-F14 E39-F15 Dimension 2.4/1.2
Four, (See note.)
Four,
Four, R0.8
Sleeve Bender E39-F11
10.8
R12.5 R7.5
42.5
Safety Precautions
Refer Warranty Limitations Liability.
WARNING
This product designed rated ensuring safety persons either directly indirectly. such purposes.
Fiber Cutting Procedure thin fiber follows:
attachment temporarily fitted thin fiber before shipment.
Thin fiber attachment (E39-F9)
Precautions Correct
product atmospheres environments that exceed product ratings.
Temporarily fitted
Fiber Units
Mounting
Tightening Force tightening force applied Fiber Unit should follows: Screw-mounting Model
Spring mounting clip Toothed washers Retaining screw (flat head sunken head) max.)
Secure attachment after adjusting position direction indicated arrow. Insert fiber into E39-F4.
Cylindrical Model
Cutter (E39-F4)
holes thin fiber Three holes standard fiber (2.2-mm dia.)
proper-sized wrench.
Nuts (attachment)
Clamping torque 0.98 max. 0.78 max. 0.29 max. max. 0.78 max. tip: 0.49 max. More than from tip: 0.78 max. 0.49 max. 0.39 max.
Finished state (proper cutting state)
Approx. Insertion direction Note: Insert fiber direction indicated arrow.
Fiber Units screw/ 6-mm dia. cylinder M3/M4 screw 2-mm dia./3-mm dia. cylinder 1.5-mm dia./1-mm dia. cylinder E32-L25A E32-M21 E32-T16 E32-R21 E32-T16W(R) E32-T16P(R) E32-T16J(R) E32-L24S E32-L24L E32-T25L
Connection pull press Fiber Units. Fiber Units have withstand force 29.4 maximum. bend Fiber Unit beyond permissible bending radius given under Ordering Information. bend edge Fiber Units (excluding E32-T@R E32-D@R).
Correct
min.
Incorrect
Amplifier Unit
Fiber Unit
0.29 max.
apply excess force Fiber Units.
Correct
Fiber Unit Nylon wireholder
min.
Incorrect
Chemical-resistive Models
following method recommended prevent fluororesin case from cracking when Sensor being secured. especially careful crack case when using screws secure Sensor.
Fiber Sensing Head one-turn loop absorb vibrations.
Fiber Head could broken excessive vibration. prevent this, following effective:
Tape
E39-F11 Sleeve Bender bending radius stainless steel tube should large possible. smaller bending radius becomes, shorter sensing distance will Insert stain1.2 dia. max. less steel tube dia. min. Sleeve Bender bend stainless steel tube R12.5 slowly along curve R7.5 Sleeve Bender.
Fiber position mark
Liquid-level Detection Sensors: Tube-mounting Models Ensure that tube deformed when using band secure Fiber Unit. Drops water, bubbles, haze inside tube cause malfunctions. E32-A07E1(E2)
There difference sensing object angle between E32-A07E1 E32-A07E2. Select model accordance with bending direction sensing object. fiber with model display tube light emitting side.
View from cable drawing side Sensing object
max.
Stainless steel tube
Emission Reception
Reception Emission
E32-A07E2
E32-A07E1
bend here.
Adjustment
E32-G14 sensing distance short, making incident light intensity large. This makes impossible teach without workpiece. Perform teaching with without workpiece. Liquid-level (E32-D82F) Detection Position liquid-level detection position distance 5.2±2 from fluororesin section. Liquid-level detection position (Refer diagram 5.2±2 (from right.) fluororesin section) liquid-level detection position varies with surface tension liquid degree wetness Fiber Unit's detection position.
Heat-resistant Fiber Units (E32-D51 E32-T51) fibers these Units cannot extended using E39F10 Fiber Connector. maximum allowable temperature continuous operation with these Units 130°C. 150°C short-term use. E32-T14 E32-G14 These Units enter light-ON state there reflecting objects ends lenses. this case, attach black stickers provided ends lenses.
Stickers
Wafer Sensors (E32-L25(A)) ensure correct performance, insert fiber with white line into emitter-side port Amplifier Unit. E32-T16 E32-T16P Example
E32-T16's sensing head
Other Considerations
Liquid Level (E32-D82F) Operation become unstable following cases: Bubbles stick cone sensing head. Solute deposited cone sensing head. liquid high viscosity. There some liquids, such milky white liquids, which detection possible. fluororesin section bump into another object. Damage deformation sensing head result unstable operation. Heat-resistant Fiber Units (E32-D81R, E32-D61, E32D73) pitch emission-side reception-side fiber-insertion ports varies with Amplifier Unit. sure appropriate Fiber Unit.
Amplifier Unit E3X-DA@-S E3X-MDA@ E3X-DA@-N E3X-NA@ Fiber Unit E32-D@-S E32-D@
Slit provided
slit provided, peel backing sheet, align with edges sensing surface, attach sensing head. slit applications where saturation occurs (i.e., changes light intensity cannot obtained) short sensing distances.
E32-M21 Separate fibers distances sufficient prevent interference. Vacuum-resistant Fiber Units (E32-V) Although Flanges, Fiber Units vacuum side, Lens Units have been cleaned, extra precaution, clean these products with alcohol before high-vacuum environments ensure that they properly degreased. Liquid-level Detection Sensors (E32-D82F) Secure Fiber Unit using unbendable section. Otherwise, liquid-level detection position displaced. applications hazardous environments, install Fiber Unit hazardous environment install Amplifier Unit safe environment.
Chemical-resistant Fiber Liquid Level (E32-D82F)
Fluororesin high chemical resistance. However, applications atmosphere vaporized chemicals (gases) steam cause malfunction damage inside sensors. full check before using such environments.
Accessories
E39-R3 Reflector detergent, etc., remove dust from surfaces where tape applied. Adhesive tape will attached properly dust remains surface. E39-R3 cannot used places where exposed chemicals. E39-F32@ Protective Spiral Tubes Insert fiber Protective Spiral Tube from head connector side (screwed) tube. Push fiber into Protective Spiral Tube. tube should straight that fiber twisted when inserted. Then turn spiral tube. Secure Protective Spiral Tube suitable place with attached nut. E39-F10 Fiber Connector Mount Fiber Connector shown following illustrations.
Splice Fiber Unit Retention unit Protective Spiral Tube Fiber Unit Fiber Unit Retention unit
Fiber Unit
Fiber Unit
Protective Spiral Tube
Fiber Unit
Fiber Units should close possible when they connected. Sensing distance will reduced approximately when fibers connected. Only 2.2-mm dia. fibers connected.
Mounting panel
Hexagon clamping
Protective Spiral Tube
Fiber Unit Toothed washer
attached saddle secure Protective Spiral Tube. secure Protective Spiral Tube position other than cap, apply tape tube that portion becomes thicker diameter.
Saddle Tube
READ UNDERSTAND THIS DOCUMENT
Please read understand this document before using products. Please consult your OMRON representative have questions comments.
WARRANTY
OMRON's exclusive warranty that products free from defects materials workmanship period year other period specified) from date sale OMRON. OMRON MAKES WARRANTY REPRESENTATION, EXPRESS IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, FITNESS PARTICULAR PURPOSE PRODUCTS. BUYER USER ACKNOWLEDGES THAT BUYER USER ALONE DETERMINED THAT PRODUCTS WILL SUITABLY MEET REQUIREMENTS THEIR INTENDED USE. OMRON DISCLAIMS OTHER WARRANTIES, EXPRESS IMPLIED.
LIMITATIONS LIABILITY
OMRON SHALL RESPONSIBLE SPECIAL, INDIRECT, CONSEQUENTIAL DAMAGES, LOSS PROFITS COMMERCIAL LOSS CONNECTED WITH PRODUCTS, WHETHER SUCH CLAIM BASED CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY. event shall responsibility OMRON exceed individual price product which liability asserted. EVENT SHALL OMRON RESPONSIBLE WARRANTY, REPAIR, OTHER CLAIMS REGARDING PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, MAINTAINED SUBJECT CONTAMINATION, ABUSE, MISUSE, INAPPROPRIATE MODIFICATION REPAIR.
SUITABILITY
PRODUCTS CONTAINED THIS DOCUMENT SAFETY RATED. THEY DESIGNED RATED ENSURING SAFETY PERSONS, SHOULD RELIED UPON SAFETY COMPONENT PROTECTIVE DEVICE SUCH PURPOSES. Please refer separate catalogs OMRON's safety rated products. OMRON shall responsible conformity with standards, codes, regulations that apply combination products customer's application product. customer's request, OMRON will provide applicable third party certification documents identifying ratings limitations that apply products. This information itself sufficient complete determination suitability products combination with product, machine, system, other application use. following some examples applications which particular attention must given. This intended exhaustive list possible uses products, intended imply that uses listed suitable products: Outdoor use, uses involving potential chemical contamination electrical interference, conditions uses described this document. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, installations subject separate industry government regulations. Systems, machines, equipment that could present risk life property. Please know observe prohibitions applicable products. NEVER PRODUCTS APPLICATION INVOLVING SERIOUS RISK LIFE PROPERTY WITHOUT ENSURING THAT SYSTEM WHOLE BEEN DESIGNED ADDRESS RISKS, THAT OMRON PRODUCT PROPERLY RATED INSTALLED INTENDED WITHIN OVERALL EQUIPMENT SYSTEM.
PERFORMANCE DATA
Performance data given this document provided guide user determining suitability does constitute warranty. represent result OMRON's test conditions, users must correlate actual application requirements. Actual performance subject OMRON Warranty Limitations Liability.
CHANGE SPECIFICATIONS
Product specifications accessories changed time based improvements other reasons. practice change model numbers when published ratings features changed, when significant construction changes made. However, some specifications product changed without notice. When doubt, special model numbers assigned establish specifications your application your request. Please consult with your OMRON representative time confirm actual specifications purchased products.
DIMENSIONS WEIGHTS
Dimensions weights nominal used manufacturing purposes, even when tolerances shown.
ERRORS OMISSIONS
information this document been carefully checked believed accurate; however, responsibility assumed clerical, typographical, proofreading errors, omissions.
PROGRAMMABLE PRODUCTS
OMRON shall responsible user's programming programmable product, consequence thereof.
COPYRIGHT COPY PERMISSION
This document shall copied sales promotions without permission. This document protected copyright intended solely conjunction with product. Please notify before copying reproducing this document manner, other purpose. copying transmitting this document another, please copy transmit entirety.
host remarkable functions inside compact body. complete lineup sensor heads handle even wider range applications. This platform OMRON's sensing technology.
Laser-type Smart Sensors ZX-L Series
Linear Platform
Inductive Displacement Smart Sensors ZX-E Series
High-resolution sensing using laser magnetic technology.
Smart Monitor
improved lineup smarter sensing. lineup Smart Sensors that eddy current method.
ON/OFF Platform
Digital Fiber Sensors E3X-DA-S Series/MDA Series
Laser-type Photoelectric Sensors with Separate Digital Amplifiers E3C-LDA Series
common platform Fiber Sensors Sensors with Separate Amplifiers.
Mobile Console
Refinement generation that goes beyond superior performance. Photoelectric Sensors with Separate Digital Amplifiers have joined Smart Sensor family.
This document provides information mainly selecting suitable models. Please read Instruction Sheet carefully information that user must understand accept before purchase, including information warranty, limitations liability, precautions.
Note: this document operate Unit.
Authorized Distributor:
Note: Specifications subject change without notice.
2007.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
interest product improvement, specifications subject change without notice.
(c)Copyright OMRON Corporation 2007 Rights Reserved.
Other recent searches
STN3PF06 - STN3PF06 STN3PF06 Datasheet
Si3442BDV - Si3442BDV Si3442BDV Datasheet
MAX913 - MAX913 MAX913 Datasheet
MAX912 - MAX912 MAX912 Datasheet
MAX912 - MAX912 MAX912 Datasheet
MAX913 - MAX913 MAX913 Datasheet
APT9F100B - APT9F100B APT9F100B Datasheet
APT9F100S - APT9F100S APT9F100S Datasheet
1SS178 - 1SS178 1SS178 Datasheet
1885290000 - 1885290000 1885290000 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
