High-Speed, Single-Supply, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAm

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

High-Speed, Single-Supply, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAm

Datasheet Thumbnail

Top Searches for this datasheet

OPA350 OPA2350 OPA4350
High-Speed, Single-Supply, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAmplifiertSeries
RAIL-TO-RAIL INPUT RAIL-TO-RAIL OUTPUT (within 10mV) WIDE BANDWIDTH: 38MHz HIGH SLEW RATE: 22V/µs NOISE: 5nV/Hz THD+NOISE: 0.0006% UNITY-GAIN STABLE MicroSIZE PACKAGES SINGLE, DUAL, QUAD
DESCRIPTION
OPA350 series rail-to-rail CMOS operational amplifiers optimized voltage, single-supply operation. Rail-to-rail input/output, noise (5nV/Hz), high speed operation (38MHz, 22V/µs) make them ideal driving sampling Analog-to-Digital (A/D) converters. They also well suited cell phone control loops video processing drive capability) well audio general purpose applications. Single, dual, quad versions have identical specifications maximum design flexibility. OPA350 series operates single supply 2.5V with input common-mode voltage range that extends 300mV below ground 300mV above positive supply. Output voltage swing within 10mV supply rails with load. Dual quad designs feature completely independent circuitry lowest crosstalk freedom from interaction. single (OPA350) dual (OPA2350) come miniature MSOP-8 surface mount, SO-8 surface mount, DIP-8 packages. quad (OPA4350) packages space-saving SSOP-16 surface mount SO-14 surface mount. specified from -40°C +85°C operate from -55°C +150°C.
SPICE model available www.ti.com
APPLICATIONS
CELL PHONE CONTROL LOOPS DRIVING CONVERTERS VIDEO PROCESSING DATA ACQUISITION PROCESS CONTROL AUDIO PROCESSING COMMUNICATIONS ACTIVE FILTERS TEST EQUIPMENT
OPA350
Output
OPA4350
OPA4350
SSOP-16
SO-14
DIP-8, SO-8, MSOP-8
OPA2350
DIP-8, SO-8, MSOP-8
Please aware that important notice concerning availability, standard warranty, critical applications Texas Instruments semiconductor products disclaimers thereto appears this data sheet. trademarks property their respective owners.
PRODUCTION DATA information current publication date. Products conform specifications terms Texas Instruments standard warranty. Production processing does necessarily include testing parameters.
Copyright 2000-2005, Texas Instruments Incorporated
www.ti.com
OPA350 OPA2350 OPA4350
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage 7.0V Signal Input Terminals(2), Voltage (V-) 0.3V (V+) 0.3V Current 10mA Open Short-Circuit Current(3) Continuous Operating Temperature Range -55°C +150°C Storage Temperature Range -55°C +150°C Junction Temperature +150°C Lead Temperature (soldering, 10s) +300°C Stresses above these ratings cause permanent damage. Exposure absolute maximum conditions extended periods degrade device reliability. These stress ratings only, functional operation device these other conditions beyond those specified implied. Input terminals diode-clamped power-supply rails. Input signals that swing more than 0.3V beyond supply rails should current limited 10mA less. Short-circuit ground, amplifier package.
ELECTROSTATIC DISCHARGE SENSITIVITY
This integrated circuit damaged ESD. Texas Instruments recommends that integrated circuits handled with appropriate precautions. Failure observe proper handling installation procedures cause damage. damage range from subtle performance degradation complete device failure. Precision integrated circuits more susceptible damage because very small parametric changes could cause device meet published specifications.
PACKAGE/ORDERING INFORMATION(1)
PRODUCT SINGLE OPA350EA OPA350UA OPA350PA DUAL OPA2350EA OPA2350UA OPA2350PA QUAD OPA4350EA OPA4350UA SSOP-16 SO-14 -40°C +85°C -40°C +85°C OPA4350EA OPA4350UA OPA4350EA/250 OPA4350EA/2K5 OPA4350UA OPA4350UA/2K5 Tape Reel, Tape Reel, 2500 Rails Tape Reel, 2500 MSOP-8 SO-8 DIP-8 -40°C +85°C -40°C +85°C -40°C +85°C OPA2350UA OPA2350PA OPA2350EA/250 OPA2350EA/2K5 OPA2350UA OPA2350UA/2K5 OPA2350PA Tape Reel, Tape Reel, 2500 Rails Tape Reel, 2500 Rails MSOP-8 SO-8 DIP-8 -40°C +85°C -40°C +85°C -40°C +85°C OPA350UA OPA350PA OPA350EA/250 OPA350EA/2K5 OPA350UA OPA350UA/2K5 OPA350PA Tape Reel, Tape Reel, 2500 Rails Tape Reel, 2500 Rails PACKAGE-LEAD PACKAGE DESIGNATOR SPECIFIED TEMPERATURE RANGE PACKAGE MARKING ORDERING NUMBER TRANSPORT MEDIA, QUANTITY
most current package ordering information, Package Option Addendum located this data sheet.
www.ti.com
OPA350 OPA2350 OPA4350
ELECTRICAL CHARACTERISTICS: 2.7V 5.5V
Boldface limits apply over temperature range, -40°C +85°C.
specifications +25°C, connected VS/2 VOUT VS/2, unless otherwise noted. PARAMETER OFFSET VOLTAGE Input Offset Voltage -40°C +85°C Temperature Power-Supply Rejection Ratio -40°C +85°C Channel Separation (dual, quad) INPUT BIAS CURRENT Input Bias Current Temperature Input Offset Current NOISE Input Voltage Noise, 100Hz 400kHz Input Voltage Noise Density, 10kHz Input Current Noise Density, 100kHz Current Noise Density, 10kHz INPUT VOLTAGE RANGE Common-Mode Voltage Range Common-Mode Rejection Ratio -40°C +85°C INPUT IMPEDANCE Differential Common-Mode OPEN-LOOP GAIN Open-Loop Voltage Gain -40°C +85°C -40°C +85°C FREQUENCY RESPONSE Gain-Bandwidth Product Slew Rate Settling Time: 0.1% 0.01% Overload Recovery Time Total Harmonic Distortion Noise Differential Gain Error Differential Phase Error THD+N 10k, 50mV (V+) -50mV 10kW, 50mV (V+) -50mV 200mV (V+) -200mV 1kW, 200mV (V+) -200mV 100pF Step Step 600, 2.5VPP(2), 1kHz 600, 1.4V(3) 600, 1.4V(3) 0.22 0.0006 0.17 0.17 V/µs CMRR -40°C +85°C 2.7V, -0.1V 2.8V 5.5V, -0.1V 5.6V 5.5V, -0.1V 5.6V -0.1 1013 1013 (V+) µVrms nV/Hz nV/Hz fA/Hz ±0.5 ±0.5 Typical Characteristics PSRR -40°C +85°C 2.7V 5.5V, 2.7V 5.5V, ±150 0.15 ±500 µV/°C µV/V µV/V µV/V TEST CONDITIONS OPA350, OPA2350, OPA4350 TYP(1) UNIT
+5V. VOUT 0.25V 2.75V. NTSC signal generator used. Figure test circuit. Output voltage swings measured between output power supply rails. typical characteristic curve, Output Voltage Swing Output Current.
OPA350 OPA2350 OPA4350
www.ti.com
ELECTRICAL CHARACTERISTICS: 2.7V 5.5V (continued)
Boldface limits apply over temperature range, -40°C +85°C.
specifications +25°C, connected VS/2 VOUT VS/2, unless otherwise noted. PARAMETER OUTPUT Voltage Output Swing from Rail(4) -40°C +85°C -40°C +85°C Output Current Short-Circuit Current Capacitive Load Drive POWER SUPPLY Operating Voltage Range Minimum Operating Voltage Quiescent Current (per amplifier) -40°C +85°C TEMPERATURE RANGE Specified Range Operating Range Storage Range Thermal Resistance MSOP-8 Surface Mount SO-8 Surface Mount DIP-8 SO-14 Surface Mount SSOP-16 Surface Mount +5V. VOUT 0.25V 2.75V. NTSC signal generator used. Figure test circuit. Output voltage swings measured between output power supply rails. typical characteristic curve, Output Voltage Swing Output Current. °C/W °C/W °C/W °C/W °C/W -40°C +85°C +150 +150 VOUT 10k, 100dB 10kW, 100dB 100dB 1kW, 100dB IOUT CLOAD ±40(5) Typical Characteristics TEST CONDITIONS OPA350, OPA2350, OPA4350 TYP(1) UNIT
www.ti.com
OPA350 OPA2350 OPA4350
TYPICAL CHARACTERISTICS
specifications +25°C, +5V, connected VS/2, unless otherwise noted.
OPEN-LOOP GAIN/PHASE FREQUENCY Voltage Gain (dB) 100k Frequency (Hz) -180 100M -135 PSRR, CMRR (dB) Phase
POWER SUPPLY COMMON- MODE REJECTION RATIO FREQUENCY
PSRR
CMRR -0.1V 5.1V)
100k
Frequency (Hz)
INPUT VOLTAGE CURRENT NOISE SPECTRAL DENSITY FREQUENCY 100k
CHANNEL SEPARATION FREQUENCY
Voltage Noise (nVHz)
Current Noise
Current Noise (fAHz)
Channel Separation (dB)
Dual quad devices. 100k
Voltage Noise
100k Frequency (Hz)
Frequency (Hz)
TOTAL HARMONIC DISTORTION NOISE FREQUENCY Harmonic Distortion THD+N 100, 3VPP
HARMONIC DISTORTION NOISE FREQUENCY (-40dBc) (-60dBc) 0.01 (-80dBc) 0.001 (-100dBc) 0.0001 (-120dBc) 2.5VPP
0.01
3VPP 3VPP Input goes through transition region 2.5VPP 0.25V 2.75V) Input does through transition region
0.001
3rd-Harmonic 2nd-Harmonic 100k Frequency (Hz)
0.0001 Frequency (Hz) 100k
OPA350 OPA2350 OPA4350
www.ti.com
TYPICAL CHARACTERISTICS (continued)
specifications +25°C, +5V, connected VS/2, unless otherwise noted.
DIFFERENTIAL GAIN/PHASE RESISTIVE LOAD Phase 1.4V NTSC Signal Generator Figure test circuit.
OPEN-LOOP GAIN TEMPERATURE
Open-Loop Gain (dB)
Differential Gain Differential Phase
Gain
1000 Resistive Load Temperature
COMMON-MODE POWER- SUPPLY REJECTION RATIO TEMPERATURE CMRR, 5.5V (VCM -0.1V +5.6V) Slew Rate (V/µs) CMRR (dB) PSRR (dB)
SLEW RATE TEMPERATURE Negative Slew Rate Positive Slew Rate
PSRR
CMRR, 2.7V (VCM -0.1V +2.8V)
Temperature (_C)
Temperature (_C)
QUIESCENT CURRENT SHORT-CIRCUIT CURRENT TEMPERATURE +ISC -ISC Short-Circuit Current (mA) Quiescent Current (mA) Quiescent Current (mA) Temperature (_C)
QUIESCENT CURRENT SUPPLY VOLTAGE Amplifier Supply Voltage
www.ti.com
OPA350 OPA2350 OPA4350
TYPICAL CHARACTERISTICS (continued)
specifications +25°C, +5V, connected VS/2, unless otherwise noted.
INPUT BIAS CURRENT TEMPERATURE
INPUT BIAS CURRENT INPUT COMMON-MODE VOLTAGE
Input Bias Current (pA)
Input Bias Current (pA) Temperature
-0.5 -0.5 Common-Mode Voltage
CLOSED-LOOP OUTPUT IMPEDANCE FREQUENCY Output Impedance Output Voltage (VPP) 0.01 0.001 0.0001 100k 100M Frequency (Hz) 100k
MAXIMUM OUTPUT VOLTAGE FREQUENCY 5.5V Maximum output voltage without slew rate-induced distortion.
2.7V
Frequency (Hz)
100M
OUTPUT VOLTAGE SWING OUTPUT CURRENT +125_ (V+)-2 -55_C +25_C Open-Loop Gain (dB) (V+)-1 Output Voltage Output Current (mA)
OPEN-LOOP GAIN OUTPUT VOLTAGE SWING IOUT 250µA 2.5mA
(V-)+2
Depending circuit configuration (including closed-loop gain) performance degraded shaded region. +125_C +25_C -55_C
IOUT 4.2mA
(V-)+1
(V-)
Output Voltage Swing from Rails (mV)
OPA350 OPA2350 OPA4350
www.ti.com
TYPICAL CHARACTERISTICS (continued)
specifications +25°C, +5V, connected VS/2, unless otherwise noted.
OFFSET VOLTAGE PRODUCTION DISTRIBUTION Percent Amplifiers -500 -450 -400 -350 -300 -250 -200 -150 -100 Typical distribution packaged units. Percent Amplifiers
OFFSET VOLTAGE DRIFT PRODUCTION DISTRIBUTION Typical production distribution packaged units.
Offset Voltage (µV)
Offset Voltage Drift (µV/_C)
SMALL-SIGNAL OVERSHOOT LOAD CAPACITANCE 100k Load Capacitance (pF) Settling Time (µs) Overshoot
SETTLING TIME CLOSED-LOOP GAIN
0.01%
0.1% Closed-Loop Gain (V/V) -100
SMALL-SIGNAL STEP RESPONSE 100pF
LARGE-SIGNAL STEP RESPONSE 100pF
50mV/div
100ns/div
1V/div
200ns/div
www.ti.com
OPA350 OPA2350 OPA4350
APPLICATIONS INFORMATION
OPA350 series amps fabricated state-of-the-art micron CMOS process. They unity-gain stable suitable wide range general-purpose applications. Rail-to-rail input/output make them ideal driving sampling converters. They also well-suited controlling output power cell phones. These applications often require high speed noise. addition, OPA350 series offers low-cost solution general-purpose consumer video applications drive capability). Excellent performance makes OPA350 series well-suited audio applications. Their bandwidth, slew rate, noise (5nV/Hz), (0.0006%), small package options ideal these applications. class output stage capable driving loads connected point between ground. Rail-to-rail input output swing significantly increases dynamic range, especially voltage supply applications. Figure shows input output waveforms OPA350 unity-gain configuration. Operation from single supply with load connected VS/2. input 5VPP sinusoid. Output voltage swing approximately 4.95VPP. Power supply pins should bypassed with 0.01µF ceramic capacitors.
OPERATING VOLTAGE
OPA350 series amps fully specified from +2.7V +5.5V. However, supply voltage range from +2.5V +5.5V. Parameters tested over specified supply range-a unique feature OPA350 series. addition, many specifications apply from -40°C +85°C. Most behavior remains virtually unchanged throughout full operating voltage range. Parameters that vary significantly with operating voltage temperature shown typical characteristics.
RAIL-TO-RAIL INPUT
tested input common-mode voltage range OPA350 series extends 100mV beyond supply rails. This achieved with complementary input stage-an N-channel input differential pair parallel with P-channel differential pair, shown Figure N-channel pair active input voltages close positive rail, typically (V+) 1.8V 100mV above positive supply, while P-channel pair inputs from 100mV below negative supply approximately (V+) 1.8V. There small transition region, typically (V+) (V+) 1.6V, which both pairs This 400mV transition region vary ±400mV with process variation. Thus, transition region (both input stages range from (V+) 2.4V (V+) 2.0V end, (V+) 1.6V (V+) 1.2V high end. OPA350 series amps laser-trimmed reduce offset voltage difference between N-channel P-channel input stages, resulting improved common-mode rejection smooth transition between N-channel pair P-channel pair. However, within 400mV transition region PSRR, CMRR, offset voltage, offset drift, degraded compared operation outside this region. double-folded cascode adds signal from input pairs presents differential signal class output stage. Normally, input bias current approximately 500fA. However, large inputs (greater than 300mV beyond supply rails) turn OPA350's input protection diodes, causing excessive current flow input pins. Momentary voltages greater than 300mV beyond power supply tolerated current input pins limited 10mA. This easily accomplished with input resistor, shown Figure Many input signals inherently current-limited less than 10mA; therefore, limiting resistor required.
1.25V/div
VOUT
Figure Rail-to-Rail Input Output
OPA350 OPA2350 OPA4350
SBOS099C SEPTEMBER 2000 REVISED JANUARY 2005 Reference Current
www.ti.com
VIN+
VIN- VBIAS1 Class Control Circuitry
VBIAS2
(Ground)
Figure Simplified Schematic within tens millivolts from supply rails maintain high open-loop gain. typical characteristics Output Voltage Swing Output Current Open-Loop Gain Output Voltage.
IOVERLOAD 10mA
OPAx350
CAPACITIVE LOAD STABILITY
VOUT
OPA350 series amps drive wide range capacitive loads. However, amps under certain conditions become unstable. configuration, gain, load value just factors consider when determining stability. unity-gain configuration most susceptible effects capacitive load. capacitive load reacts with amp's output impedance, along with additional load resistance, create pole small-signal response that degrades phase margin. unity gain, OPA350 series amps perform well with very large capacitive loads. Increasing gain enhances amplifier's ability drive more capacitance. typical characteristic Small-Signal Overshoot Capacitive Load shows performance with resistive load. Increasing load resistance improves capacitive load drive capability.
Figure Input Current Protection Voltages Exceeding Supply Voltage
RAIL-TO-RAIL OUTPUT
class output stage with common-source transistors used achieve rail-to-rail output. light resistive loads (>10k), output voltage swing typically millivolts from supply rails. With heavier resistive loads (600 10k), output swing
www.ti.com
OPA350 OPA2350 OPA4350
FEEDBACK CAPACITOR IMPROVES RESPONSE
optimum settling time stability with high-impedance feedback networks, necessary feedback capacitor across feedback resistor, shown Figure This capacitor compensates zero created feedback network impedance OPA350's input capacitance (and parasitic layout capacitance). effect becomes more significant with higher impedance networks.
series provides effective means buffering A/D's input capacitance resulting charge injection while providing signal gain. Figure shows OPA350 driving ADS7861. ADS7861 dual, 500kHz, 12-bit sampling converter tiny SSOP-24 package. When used with miniature package options OPA350 series, combination ideal space-limited applications. further information, consult ADS7861 data sheet (SBAS110A).
OUTPUT IMPEDANCE
PA350
VOUT
frequency open-loop output impedance OPA350's common-source output stage approximately When connected with feedback, this value reduced significantly loop gain amp. example, with 122dB open-loop gain, output impedance reduced unity-gain less than 0.001. each decade rise closed-loop gain, loop gain reduced same amount which results ten-fold increase effective output impedance (see typical characteristic, Output Impedance Frequency). higher frequencies, output impedance will rise open-loop gain drops. However, these frequencies output also becomes capacitive parasitic capacitance. This prevents output impedance from becoming high, which cause stability problems when driving capacitive loads. mentioned previously, OPA350 excellent capacitive load drive capability with bandwidth.
Where equal OPA350's input capacitance (approximately 9pF) plus parasitic layout capacitance.
Figure Feedback Capacitor Improves Dynamic Performance suggested that variable capacitor used feedback capacitor since input capacitance vary between amps layout capacitance difficult determine. circuit shown Figure value variable feedback capacitor should chosen that input resistance times input capacitance OPA350 (typically 9pF) plus estimated parasitic layout capacitance equals feedback capacitor times feedback resistor: where equal OPA350's input capacitance (sum differential common-mode) plus layout capacitance. capacitor varied until optimum performance obtained.
VIDEO LINE DRIVER
Figure shows circuit single supply, composite video line driver. synchronized outputs composite video line driver extend below ground. shown, input should ac-coupled shifted positively provide adequate signal swing account these negative signals single-supply configuration. input terminated with resistor ac-coupled with 47µF capacitor voltage divider that provides bias point input. Figure this point approximately (V-) 1.7V. Setting optimal bias point requires some understanding nature composite video signals. best performance, should careful avoid distortion caused transition region OPA350's complementary input stage. Refer discussion rail-to-rail input.
DRIVING CONVERTERS
OPA350 series amps optimized driving medium speed 500kHz) sampling converters. However, they also offer excellent performance higher speed converters. OPA350
OPA350 OPA2350 OPA4350
www.ti.com
0.1µF SERIAL DATA SERIAL DATA BUSY CLOCK ADS7861 CONVST AGND Serial Interface 0.1µF
REFIN REFOUT DGND
2.45V 4.9V output. Choose CB1, CB0, CA1, filter high frequency noise.
Figure OPA4350 Driving Sampling Converter
www.ti.com
OPA350 OPA2350 OPA4350
220µF
0.1µF 0.1µF 10µF
1000µF ROUT Cable VOUT
47µF Video
OPA350
(pin
10µF
Figure Single-Supply Video Line Driver
(2.5V)
REF1004-2.5 100k
100k
G=5+
200k
Figure Op-Amp Instrumentation Amplifier With Improved High Frequency Common-Mode Rejection
OPA350 OPA2350 OPA4350
www.ti.com
4.7nF
10.5k
+2.5V
+2.5V
2.74k
19.6k
OPA350 -2.5V
VOUT
1830pF
270pF
OPA350
VOUT
49.9k
-2.5V
Figure 10kHz Low-Pass Filter
Figure 10kHz High-Pass Filter
PACKAGE OPTION ADDENDUM
www.ti.com
16-Mar-2007
PACKAGING INFORMATION
Orderable Device OPA2350EA/250 OPA2350EA/250G4 OPA2350EA/2K5 OPA2350EA/2K5G4 OPA2350PA OPA2350PAG4 OPA2350UA OPA2350UA/2K5 OPA2350UA/2K5G4 OPA2350UAG4 OPA350EA/250 OPA350EA/250G4 OPA350EA/2K5 OPA350EA/2K5G4 OPA350PA OPA350PAG4 OPA350UA OPA350UA/2K5 OPA350UA/2K5G4 OPA350UAG4 OPA4350EA/250 OPA4350EA/250G4 OPA4350EA/2K5 OPA4350EA/2K5G4 OPA4350UA Status ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE Package Type MSOP MSOP MSOP MSOP PDIP PDIP SOIC SOIC SOIC SOIC MSOP MSOP MSOP MSOP PDIP PDIP SOIC SOIC SOIC SOIC SSOP/ QSOP SSOP/ QSOP SSOP/ QSOP SSOP/ QSOP SOIC Package Drawing Pins Package Plan Green (RoHS Sb/Br) Green (RoHS Sb/Br) Lead/Ball Finish NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU NIPDAU Peak Temp Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Type Type Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Type Type Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR
2500 Green (RoHS Sb/Br) 2500 Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br)
2500 Green (RoHS Sb/Br) 2500 Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br)
2500 Green (RoHS Sb/Br) 2500 Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br)
2500 Green (RoHS Sb/Br) 2500 Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br) Green (RoHS Sb/Br)
2500 Green (RoHS Sb/Br) 2500 Green (RoHS Sb/Br) Green (RoHS Sb/Br)
Addendum-Page
PACKAGE OPTION ADDENDUM
www.ti.com
16-Mar-2007
Orderable Device OPA4350UA/2K5 OPA4350UA/2K5G4 OPA4350UAG4
Status ACTIVE ACTIVE ACTIVE
Package Type SOIC SOIC SOIC
Package Drawing
Pins Package Plan 2500 Green (RoHS Sb/Br) 2500 Green (RoHS Sb/Br) Green (RoHS Sb/Br)
Lead/Ball Finish NIPDAU NIPDAU NIPDAU
Peak Temp Level-2-260C-1 YEAR Level-2-260C-1 YEAR Level-2-260C-1 YEAR
marketing status values defined follows: ACTIVE: Product device recommended designs. LIFEBUY: announced that device will discontinued, lifetime-buy period effect. NRND: recommended designs. Device production support existing customers, does recommend using this part design. PREVIEW: Device been announced production. Samples available. OBSOLETE: discontinued production device.
Plan planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), Green (RoHS Sb/Br) please check latest availability information additional product content details. TBD: Pb-Free/Green conversion plan been defined. Pb-Free (RoHS): TI's terms "Lead-Free" "Pb-Free" mean semiconductor products that compatible with current RoHS requirements substances, including requirement that lead exceed 0.1% weight homogeneous materials. Where designed soldered high temperatures, Pb-Free products suitable specified lead-free processes. Pb-Free (RoHS Exempt): This component RoHS exemption either lead-based flip-chip solder bumps used between package, lead-based adhesive used between leadframe. component otherwise considered Pb-Free (RoHS compatible) defined above. Green (RoHS Sb/Br): defines "Green" mean Pb-Free (RoHS compatible), free Bromine (Br) Antimony (Sb) based flame retardants exceed 0.1% weight homogeneous material)
MSL, Peak Temp. Moisture Sensitivity Level rating according JEDEC industry standard classifications, peak solder temperature. Important Information Disclaimer:The information provided this page represents TI's knowledge belief date that provided. bases knowledge belief information provided third parties, makes representation warranty accuracy such information. Efforts underway better integrate information from third parties. taken continues take reasonable steps provide representative accurate information have conducted destructive testing chemical analysis incoming materials chemicals. suppliers consider certain information proprietary, thus numbers other limited information available release. event shall TI's liability arising such information exceed total purchase price part(s) issue this document sold Customer annual basis.
Addendum-Page
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Aug-2007
TAPE REEL INFORMATION
Pack Materials-Page
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Aug-2007
Device
Package Pins
Site
Reel Diameter (mm)
Reel Width (mm)
(mm)
(mm)
(mm)
(mm)
Pin1 (mm) Quadrant NONE
OPA2350EA/250 OPA2350EA/2K5 OPA2350UA/2K5 OPA350EA/250 OPA350EA/2K5 OPA350UA/2K5 OPA4350EA/250 OPA4350EA/2K5 OPA4350UA/2K5
TAPE REEL INFORMATION
Device OPA2350EA/250 OPA2350EA/2K5 OPA2350UA/2K5 OPA350EA/250 OPA350EA/2K5 OPA350UA/2K5 OPA4350EA/250 OPA4350EA/2K5 OPA4350UA/2K5 Package Pins Site Length (mm) 346.0 346.0 346.0 346.0 187.0 375.0 346.0 Width (mm) 346.0 346.0 346.0 346.0 187.0 340.0 346.0 Height (mm) 29.0 29.0 29.0 29.0 25.6 57.0 33.0
Pack Materials-Page
PACKAGE MATERIALS INFORMATION
www.ti.com
3-Aug-2007
Pack Materials-Page
MECHANICAL DATA
MPDI001A JANUARY 1995 REVISED JUNE 1999
(R-PDIP-T8)
0.400 (10,60) 0.355 (9,02)
PLASTIC DUAL-IN-LINE
0.260 (6,60) 0.240 (6,10)
0.070 (1,78) 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) Seating Plane 0.125 (3,18) 0.010 (0,25) Gage Plane
0.020 (0,51)
0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.010 (0,25)
0.430 (10,92)
4040082/D 05/98 NOTES: linear dimensions inches (millimeters). This drawing subject change without notice. Falls within JEDEC MS-001
latest package information,
POST OFFICE 655303
DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated subsidiaries (TI) reserve right make corrections, modifications, enhancements, improvements, other changes products services time discontinue product service without notice. Customers should obtain latest relevant information before placing orders should verify that such information current complete. products sold subject TI's terms conditions sale supplied time order acknowledgment. warrants performance hardware products specifications applicable time sale accordance with TI's standard warranty. Testing other quality control techniques used extent deems necessary support this warranty. Except where mandated government requirements, testing parameters each product necessarily performed. assumes liability applications assistance customer product design. Customers responsible their products applications using components. minimize risks associated with customer products applications, customers should provide adequate design operating safeguards. does warrant represent that license, either express implied, granted under patent right, copyright, mask work right, other intellectual property right relating combination, machine, process which products services used. Information published regarding third-party products services does constitute license from such products services warranty endorsement thereof. such information require license from third party under patents other intellectual property third party, license from under patents other intellectual property Reproduction information data books data sheets permissible only reproduction without alteration accompanied associated warranties, conditions, limitations, notices. Reproduction this information with alteration unfair deceptive business practice. responsible liable such altered documentation. Information third parties subject additional restrictions. Resale products services with statements different from beyond parameters stated that product service voids express implied warranties associated product service unfair deceptive business practice. responsible liable such statements. products authorized safety-critical applications (such life support) where failure product would reasonably expected cause severe personal injury death, unless officers parties have executed agreement specifically governing such use. Buyers represent that they have necessary expertise safety regulatory ramifications their applications, acknowledge agree that they solely responsible legal, regulatory safety-related requirements concerning their products products such safety-critical applications, notwithstanding applications-related information support that provided Further, Buyers must fully indemnify representatives against damages arising products such safety-critical applications. products neither designed intended military/aerospace applications environments unless products specifically designated military-grade "enhanced plastic." Only products designated military-grade meet military specifications. Buyers acknowledge agree that such products which designated military-grade solely Buyer's risk, that they solely responsible compliance with legal regulatory requirements connection with such use. products neither designed intended automotive applications environments unless specific products designated compliant with ISO/TS 16949 requirements. Buyers acknowledge agree that, they non-designated products automotive applications, will responsible failure meet such requirements. Following URLs where obtain information other Texas Instruments products application solutions: Products Amplifiers Data Converters Interface Logic Power Mgmt Microcontrollers RFID Power Wireless amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lpw Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office 655303, Dallas, Texas 75265 Copyright 2007, Texas Instruments Incorporated

High-Speed, Single-Supply, Rail-to-Rail OPERATIONAL AMPLIFIERS MicroAm

Top Searches for this datasheet

Other recent searches