DS9107 iButton Capsule DESCRIPTION iButton Capsule mech
|
|
|
Top Searches for this datasheet
19-4880; 8/09
DS9107
iButton Capsule
DESCRIPTION
iButton Capsule mechanical enclosure protect Temperature Logger iButtons (DS1921 DS1922 series) from moisture, solvents pressure. device consists base with cavity iButton, screw-in plug with O-ring seal enclosure, with stainless-steel screws mount iButton Capsule cable, e.g., measure temperature different levels within liquid. cable inserted into notch plug where held place matching protrusion piece. Base, plug, made polyphenylene sulfide (PPS). This material chosen mechanical properties (remains stable during both long short-term exposure high temperatures), inherent flame resistance, outstanding chemical resistance (inert steam, strong bases, fuels acids). Although virtually insoluble below 200°C, attacked chlorinated hydrocarbons. silicone O-ring matches temperature chemical qualities PPS. addition, resistant sunlight, ozone, oxygen, light. chemical stability screws does compromise that silicone.
TECHNICAL DRAWING
Screws
25.4
2.54
Protrusion Notch
25.4
6.35
Plug
12.7
O-Ring
25.4
APPLICATIONS
Autoclave Sterilization Seawater temperature profiling Monitoring beverage production Scientific research
16.5
Base
6.35
ORDERING INFORMATION
PART DS9107+ DESCRIPTION iButton Capsule
Cavity F5-size iButton
22.2
dimensions millimeters.
+Denotes lead(Pb)-free/RoHS-compliant product.
iButton registered trademark Maxim Integrated Products, Inc.
DS9107: iButton Capsule
ABSOLUTE MAXIMUM RATINGS
Temperature Range -40°C +140°C
Stresses beyond those listed under "Absolute Maximum Ratings" cause permanent damage device. These stress ratings only, functional operation device these other conditions beyond those indicated operational sections specifications implied. Exposure absolute maximum rating conditions extended periods affect device.
SPECIFICATIONS
PARAMETER Weight Physical Dimensions Torque Tightening Plug Number Open/Close Cycles Number Autoclave Cycles Thermal Response Time Constant Note Note Note Empty (Note Maximum torque applied From 25°C 101.3kPa (14.7psia) 121°C 205kPa (29.7psia), tightened maximum torque (Note (Note CONDITIONS UNITS grams 18.4 technical drawing 36.5
Equivalent 2.5ft/lbs. Absolute pressure specified; autoclave peak pressure 103.4 psig) above standard atmospheric pressure. value derived from submerging iButton capsule with DS1922T inside into 55°C water. initial temperature iButton capsule 23.5°C. Without capsule, response time constant approximately 30s.
Top, Plug, Base Material: Polyphenylene sulfide (PPS Ryton) with black flat finish, electrically non-conductive. injection molding compounds (Ryton® PPS) used DS9107 subject general safety provisions U.S. Food, Drug Cosmetic Act. responsibility purchaser/user DS9107 iButton Capsule determine safety suitability injection molding compounds their specific application. O-Ring Material: S500-70 Silicone Compound, orange, approved. Replacement O-Rings: Size AS568-019, inner diameter 13/16 inch, outer diameter 15/16 inch, cross section 1/16 inch, nominal values. Screws Material: Type austenitic stainless-steel. Replacement Screws: flat-head Phillips countersunk, self-tapping, M2.3, long.
APPLICATIONS INFORMATION
iButton inserted into base part with data contact towards bottom base. plug then placed into base initially tightened hand. Then base held with wrench, using metal stick inserted horizontally into notch plug, plug tightened until head touches base. important exceed maximum permissible torque. iButton Capsule does provide electrical contact iButton inside. Therefore necessary setup (mission) temperature logger first before inserting into iButton Capsule. download logged temperature data, logger needs taken iButton Capsule.
Ryton registered trademark Chevron Phillips Chemical Company
DS9107: iButton Capsule
REVISION HISTORY
REVISION DATE 8/09 DESCRIPTION Added sign PART number Ordering Information table, indicating lead(Pb)-free/RoHS-compliant package. PAGES CHANGED
Maxim cannot assume responsibility circuitry other than circuitry entirely embodied Maxim product. circuit patent licenses implied. Maxim reserves right change circuitry specifications without notice time.
Maxim Integrated Products, Gabriel Drive, Sunnyvale, 94086 408-737-7600
2009 Maxim Integrated Products Maxim registered trademark Maxim Integrated Products, Inc.
Other recent searches
TSC87251G1 - TSC87251G1 TSC87251G1 Datasheet
ST72361 - ST72361 ST72361 Datasheet
PL123E-04 - PL123E-04 PL123E-04 Datasheet
IRF820 - IRF820 IRF820 Datasheet
DS-331 - DS-331 DS-331 Datasheet
BFCN-1445+ - BFCN-1445+ BFCN-1445+ Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
