Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar Su

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar Su

Datasheet Thumbnail

Top Searches for this datasheet

Vishay Tansitor
Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar
Subminiature package size light weight Cylindrical case with axial radial leads 0.22µF 68µF Operating temperature range 55°C 125°C High stability reliability Tested accordance with MIL-PRF-49137 Utilize high technology extend range capacitance values each size Unique comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range: 55°C 125°C Capacitance: Measured 25°C with maximum bias volt signal. Capacitance Tolerance: Standard tolerance ratings 0.1µF above, ratings below 0.1µF. Special tolerances also available. Dissipation Factor: When measured simultaneously with capacitance, shall exceed value shown ratings tables. Leakage Current (DCL Max): When measured with voltage applied through 1,000 resistor minutes, leakage (µA) shall exceed: 25°C: Leakage current shall exceed values listed Standard Ratings Tables 85°C: Leakage current shall exceed times values listed Standard Ratings Tables 125°C rated voltage: Leakage current shall exceed times values listed Standard Ratings Tables. Operating Voltage: Full working voltage 85°C. From 85°C 125°C working voltage derates linearly 85°C working voltage.
APPLICATIONS
Hearing aids Portable communications Space/avionics Laptop computers.
MECHANICAL SPECIFICATIONS
Solder coated nickel leads (type MIL-STD-1276) standard case sizes. Leads weldable and/or solderable. Special leads available request (e.g. bare nickle, gold plated nickle ribbon leads). Lead length 1/2" [38.1 minimum nonpolar parts. polar parts negative lead 1-1/4" [31.8mm] minimum positive lead 1-1/2" [38.1mm] minimum.
ORDERING INFORMATION
MODEL CAPACITANCE VOLTAGE RATING 85°C CASE CODE Polar Nonpolar LEAD CONFIGURATION Axial Radial CAPACITANCE TOLERANCE +40, -20%
Example Part Number Code: SHA1.0-35C7AM complete part number rating tables, Change suffix special capacitance tolerance required.
www.vishay.com
technical questions, contact tantalum@vishay.com
Document Number: 43004 Revision 13-Jun-02
Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar
DIMENSIONS inches [millimeters]
POLAR STYLE
AXIAL Polarity RADIAL
Vishay Tansitor
Tolerance
Tolerance
CASE CODE
0.100 [2.54] 0.110 [2.80] 0.125 [3.18] 0.145 [3.68] 0.160 [4.06] 0.160 [4.06] 0.190 [4.83] 0.200 [5.08] 0.225 [5.72] 0.250 [6.35]
AXIAL
0.057 [1.45] 0.067 [1.70] 0.067 [1.70] 0.067 [1.70] 0.070 [1.78] 0.077 [1.96] 0.077 [1.96] 0.080 [2.03] 0.100 [2.54] 0.150 [3.81]
0.030 [0.76] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.050 [1.27] 0.070 [1.78] 0.120 [3.05]
0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.015 [0.38] 0.020 [0.51] 0.025 [0.64]
RADIAL
0.007 [0.18] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.016 [0.41]
POLAR STYLE
Tolerance Tolerance
CASE CODE
0.175 [4.45] 0.210 [5.33] 0.240 [6.10] 0.275 [6.99] 0.310 [7.87]
0.135 [3.43] 0.160 [4.06] 0.200 [5.08] 0.235 [5.97] 0.270 [6.86]
0.120 [3.05] 0.120 [3.05] 0.140 [3.56] 0.190 [4.83] 0.290 [7.37]
0.070 [1.78] 0.070 [1.78] 0.080 [2.03] 0.105 [2.67] 0.155 [3.94]
0.100 [2.54] 0.100 [2.54] 0.100 [2.54] 0.125 [3.18] 0.200 [5.08]
0.020 [0.51] 0.020 [0.51] 0.020 [0.51] 0.020 [0.51] 0.025 [0.64]
0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.010 [0.25] 0.016 [0.41]
Document Number: 43004 Revision 13-Jun-02
technical questions, contact tantalum@vishay.com
www.vishay.com
Vishay Tansitor
Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar
MAX. 25°C (µA) WVDC 85°C WVDC 85°C 0.68 *Add axial, radial WVDC 85°C WVDC 85°C WVDC 85°C SHA.68-10C1*M SHA1.0-10C2*M SHA1.5-10C3*M SHA2.2-10C4*M SHA3.3-10C5*M SHA4.7-10C6*M SHA6.8-10C7*M SHA15-10C8*M SHA22-10C9*M SHA1.0-6C1*M SHA1.5-6C2*M SHA2.2-6C3*M SHA3.3-6C4*M SHA4.7-6C5*M SHA6.8-6C6*M SHA10-6C7*M SHA22-6C8*M SHA33-6C9*M SHA1.5-4C1*M SHA2.2-4C2*M SHA3.3-4C3*M SHA4.7-4C4*M SHA6.8-4C5*M SHA10-4C6*M SHA15-4C7*M SHA33-4C8*M SHA47-4C9*M SHA2.2-3C1*M SHA3.3-3C2*M SHA4.7-3C3*M SHA6.8-3C4*M SHA10-3C5*M SHA15-3C6*M SHA22-3C7*M SHA47-3C8*M SHA68-3C9*M CASE CODE PART NUMBER
STANDARD RATINGS POLAR CAPACITORS
CAPACITANCE (µF)
SHA3.3-2C1*M SHA15-2C5*M SHA22-2C6*M SHA68-2C8*M
www.vishay.com
technical questions, contact tantalum@vishay.com
Document Number: 43004 Revision 13-Jun-02
Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar
STANDARD RATINGS POLAR CAPACITORS
CAPACITANCE (µF) MAX. WVDC 85°C 0.47 0.68 0.33 0.47 0.68 0.22 0.33 0.47 0.68 *Add axial, radial WVDC 85°C WVDC 85°C WVDC 85°C SHA.22-35C1*M SHA.33-35C2*M SHA.47-35C3*M SHA.68-35C4*M SHA1.0-35C5*M SHA1.5-35C6*M SHA1.5-35C7*M SHA2.2-35C8*M SHA2.2-25C7*M SHA3.3-25C8*M SHA6.8-25C9*M SHA.33-20C1*M SHA.47-20C2*M SHA.68-20C3*M SHA1.0-20C4*M SHA1.5-20C5*M SHA2.2-20C6*M SHA3.3-20C7*M SHA10-20C9*M SHA.47-15C1*M SHA.68-15C1*M SHA1.0-15C3*M SHA1.5-15C4*M SHA2.2-15C5*M SHA3.3-15C6*M SHA4.7-15C7*M SHA15-15C9*M CASE 25°C (µF) PART NUMBER CODE
Vishay Tansitor
STANDARD RATINGS NON-POLAR CAPACITORS
CAPACITANCE (µF) MAX. WVDC 85°C axial, radial Document Number: 43004 Revision 13-Jun-02 technical questions, contact tantalum@vishay.com www.vishay.com WVDC 85°C SHA2.2-4N2*M SHA4.7-4N3*M SHA10-4N4*M SHA33-4N5*M SHA3.3-2N2*M SHA6.8-2N3*M SHA15-2N4*M SHA47-2N5*M CASE 25°C (µF) PART NUMBER CODE
Vishay Tansitor
Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar
(µF) MAX. WVDC 85°C 0.68 0.47 0.33 0.68 axial, radial WVDC 85°C WVDC 85°C WVDC 85°C WVDC 85°C SHA.33-35N2*M SHA.68-35N3*M SHA1.5-35N4*M SHA.47-20N2*M SHA1.0-20N3*M SHA2.2-20N4*M SHA6.8-20N5*M SHA.68-15N2*M SHA1.5-15N3*M SHA3.3-15N4*M SHA10-15N5*M SHA1.0-10N2*M SHA2.2-10N3*M SHA4.7-10N4*M SHA15-10N5*M SHA1.5-6N2*M SHA3.3-6N3*M SHA6.8-6N4*M SHA22-6N5*M CASE 25°C (µF) PART NUMBER CODE
STANDARD RATINGS NON-POLAR CAPACITORS
CAPACITANCE
MARKING
Capacitors case sizes print marked: Capacitance picofarads digits significant figures digit indicates number zeros. other case sizes have color marking: Capacitance picofarads, indicated dots. give significant digits. indicates number Capacitance Tolerance indicated side case. Black omitted. Color Gold Silver None None Tolerance 40%/- zeros. Color location shown dimensional sketches. Color Black Brown Orange Yellow Green Blue Grey positive lead indicated color epoxy unit. Radial lead style marked with brown epoxy top. Axial lead style marked with brown epoxy cathode end. White e.g. Yellow-Violet-Green 4,700,000
Document Number: 43004 Revision 13-Jun-02
Digit
Black omitted black sleeve. Violet
www.vishay.com
technical questions, contact tantalum@vishay.com
Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar
PERFORMANCE RELIABILITY
capacitors tested accordance with MIL-PRF49137, with specific requirements follows: Temperature Stability: When tested MIL-PRF-49137/ capacitance shall within +/-15% -55°C 85°C, +/-10% 25°C after exposure temperature extremes. shall within 200% initial limit 55°C, 150% initial limit 85°C, meet initial 25°C. shall within initial limit 85°C, meet initial limit 25°C. Moisture Resistance: (per Method MIL-STD-202) After cycles hours 25°C 65°C 80-98% capacitance shall within +/-15% initial value, within initial limit leakage within initial limit. Life: (per Method MIL-STD-202) after 1,000 hours 85°C rated voltage; capacitance shall within +/-10% initial limit, within initial limits, leakage within 200% initial limit. Surge Voltage: (per MIL-PRF-49317) After 1,000 cycles 85°C WVDC; capacitance shall within +/-10% initial limit, leakage within initial limits. Resistance Soldering Heat: (per Method MILSTD-202, Condition After immersion 260°C molten solder within 1/4" body unit, there shall evidence mechanical electrical degradation. Solderability: (per Method MIL-STD-202) After dipping leads 235°C molten solder within .125" body unit, solder shall cover lead surface. Terminal Strength: (per Method MIL-STD-202) After following test there shall loosening terminals permanent damage terminals. Test Condition (Pull Test) 0.010" leads withstand pound, 0.016" leads pounds 0.007" leads pound. Test Condition (Bend Test) leads shall withstand 3-90° bends with pound applied force.
IMPEDANCE-OHMS
Vishay Tansitor
IMPEDANCE FREQUENCY
FREQUENCY
(MFD-WVDC)
F-50 µF-1
LEAKAGE CURRENT TEMPERATURE
(MFD-WVDC)
CAPACITANCE TEMPERATURE
(MFD-WVDC)
CHANGE CAPACITANCE
D.C. LEAKAGE CURRENT (µA)
1µF-20V 100µF-10V
ICAL
0.01 +100 TEMPERATURE
TEMPERATURE
Document Number: 43004 Revision 13-Jun-02
technical questions, contact tantalum@vishay.com
www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
product specifications data subject change without notice. Vishay Intertechnology, Inc., affiliates, agents, employees, persons acting their behalf (collectively, "Vishay"), disclaim liability errors, inaccuracies incompleteness contained herein other disclosure relating product. Vishay disclaims liability arising application product described herein information provided herein maximum extent permitted law. product specifications expand otherwise modify Vishay's terms conditions purchase, including limited warranty expressed therein, which apply these products. license, express implied, estoppel otherwise, intellectual property rights granted this document conduct Vishay. products shown herein designed medical, life-saving, life-sustaining applications unless otherwise expressly indicated. Customers using selling Vishay products expressly indicated such applications entirely their risk agree fully indemnify Vishay damages arising resulting from such sale. Please contact authorized Vishay personnel obtain written terms conditions regarding products designed such applications. Product names markings noted herein trademarks their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com

Subminiature, Leaded Solid Tantalum Capacitors Polar Non-polar Su

Top Searches for this datasheet

Other recent searches