v02.0609 MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5 n

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

v02.0609 MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5 n

Datasheet Thumbnail

Top Searches for this datasheet

HMC515LP5 515LP5E
v02.0609
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5
noise MMIC w/Half Frequency, Divide-by-4 Outputs for: VSAT Radio Point Point/Multipoint Radio Test Equipment Industrial Controls Military End-Use
Features
Dual Output: 11.5 12.5 Fo/2 5.75 6.25 Pout: Phase Noise: -110 dBc/Hz @100 Typ. External Resonator Needed Lead Ceramic 5x5mm Package: 25mm2
Functional Diagram
General Description
HMC515LP5 HMC515LP5E GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCOs. HMC515LP5 HMC515LP5E integrate resonators, negative resistance devices, varactor diodes feature half frequency divide-by-4 outputs. VCO's phase noise performance excellent over temperature, shock, process oscillator's monolithic structure. Power output typical from supply voltage. prescaler function disabled conserve current required. voltage controlled oscillator packaged leadless surface mount package, requires external matching components.
VCOS WITH FO/2 OUTPUT
Electrical Specifi cations, +25° Vcc1, Vcc2
Parameter Frequency Range Fo/2 RFOUT RFOUT/2 RFOUT/4 -110 Vtune Icc1 Icc2 Min. Typ. 11.5 12.5 5.75 6.25 Max. Units dBc/Hz MHz/V MHz/°C
Power Output Phase Noise Offset, Vtune= RFOUT Tune Voltage Supply Current Tune Port Leakage Current (Vtune= 13V) Output Return Loss Harmonics/Subharmonics
Pulling (into 2.0:1 VSWR) Pushing Vtune= Frequency Drift Rate
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC515LP5 515LP5E
v02.0609
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5
Frequency Tuning Voltage,
13.2 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) 12.8 12.4 11.6 11.2 10.8 10.4 TUNING VOLTAGE (VOLTS)
+25C +85C -40C
Frequency Tuning Voltage, 25°C
13.2 12.8 12.4 11.6 11.2 10.8 10.4 TUNING VOLTAGE (VOLTS)
Vcc= 4.75V Vcc= 5.00V Vcc= 5.25V
Sensitivity Tuning Voltage, Vcc=
TUNING VOLTAGE (VOLTS)
+25C +85C -40C
Output Power Tuning Voltage, Vcc=
VCOS WITH FO/2 OUTPUT
SENSITIVITY (MHz/Volt)
OUTPUT POWER (dBm)
+25C +85C -40C
TUNING VOLTAGE (VOLTS)
Phase Noise Tuning Voltage
PHASE NOISE (dBc/Hz)
Phase Noise Vtune=
Phase Noise (dBc/Hz)
Offset Offset
+25C +85C -40C
-100
-100 -120 -140
-110
-120 TUNING VOLTAGE (VOLTS)
-160
FREQUENCY OFFSET (GHz)
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC515LP5 515LP5E
v02.0609
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5
RFOUT/2 Frequency Tuning Voltage, Vcc=
OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (VOLTS)
+25C +85C -40C
RFOUT/2 Output Power Tuning Voltage, Vcc=
OUTPUT POWER (dBm) TUNING VOLTAGE (VOLTS)
+25C +85C -40C
VCOS WITH FO/2 OUTPUT
Divide-by-4 Frequency Tuning Voltage, Vcc=
OUTPUT FREQUENCY (GHz) TUNING VOLTAGE (VOLTS)
+25C +85C -40C
Divide-by-4 Output Power Tuning Voltage, Vcc=
OUTPUT POWER (dBm) TUNING VOLTAGE (VOLTS)
+25C +85C -40C
Absolute Maximum Ratings
Vcc1, Vcc2 Vtune Junction Temperature Continuous Pdiss (T=85 (derate 28.6 mW/C above Thermal Resistance (junction ground paddle) Storage Temperature Operating Temperature Sensitivity (HBM) +5.5 +15V 1.43 °C/W +150 Class
Typical Supply Current
4.75 5.00 5.25 (mA)
Note: will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC515LP5 515LP5E
v02.0609
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5
Outline Drawing
NOTES: LEADFRAME MATERIAL: COPPER ALLOY DIMENSIONS INCHES [MILLIMETERS] LEAD SPACING TOLERANCE NON-CUMULATIVE. BURR LENGTH SHALL 0.15mm MAXIMUM. BURR HEIGHT SHALL 0.05mm MAXIMUM. PACKAGE WARP SHALL EXCEED 0.05mm. GROUND LEADS GROUND PADDLE MUST SOLDERED GROUND. REFER HITTITE APPLICATION NOTE SUGGESTED LAND PATTERN.
VCOS WITH FO/2 OUTPUT
Package Information
Part Number HMC515LP5 HMC515LP5E Package Body Material Stress Injection Molded Plastic RoHS-compliant Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Rating MSL3 MSL3
Package Marking H515 XXXX H515 XXXX
peak reflow temperature peak reflow temperature 4-Digit number XXXX
Descriptions
Number Function Description Connection. These pins connected ground. Performance will affected. Interface Schematic
RFOUT/4
Divide-by-4 Output.
Vcc1
Supply Voltage prescaler. prescaler required, this left open conserve current.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC515LP5 515LP5E
v02.0609
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5
Descriptions
Number Function Description Interface Schematic
RFOUT/2
Half frequency output coupled).
output coupled).
Vcc2
Supply Voltage,
VTUNE
VCOS WITH FO/2 OUTPUT
Control Voltage Modulation Input. Modulation bandwidth dependent drive source impedance. "Determining Bandwidth Wideband Varactor Tuned VCO" application note.
Paddle
Package bottom exposed metal paddle that must connected RF/DC ground.
Typical Application Circuit
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC515LP5 515LP5E
v02.0609
MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5
Evaluation
VCOS WITH FO/2 OUTPUT
List Materials Evaluation 110227
Item Description Mount Connector Header Capacitor, 0402 Pkg. 1,000 Capacitor, 0402 Pkg. Tantalum Capacitor HMC515LP5 HMC515LP5E 110225 Eval Board
Reference this number when ordering complete evaluation Circuit Board Material: Rogers 4350
circuit board used final application should circuit design techniques. Signal lines should have impedance while package ground leads backside ground paddle should connected directly ground plane similar that shown. sufficient number holes should used connect bottom ground planes. evaluation circuit board shown available from Hittite upon request.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com

v02.0609 MMIC HALF FREQUENCY OUTPUT DIVIDE-BY-4, 11.5 12.5 n

Top Searches for this datasheet

Other recent searches