v04.0507 GaAs MMIC DIVIDE-BY-4, FREQUENCY DIVIDERS DETECTORS

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

v04.0507 GaAs MMIC DIVIDE-BY-4, FREQUENCY DIVIDERS DETECTORS

Datasheet Thumbnail

Top Searches for this datasheet

HMC493LP3 493LP3E
v04.0507
GaAs MMIC DIVIDE-BY-4,
FREQUENCY DIVIDERS DETECTORS
Typical Applications
Prescaler Applications: Point-to-Point Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Military
Features
Ultra Phase Noise: -150 dBc/Hz Very Wide Bandwidth Output Power: Single Supply: Package
Functional Diagram
General Description
HMC493LP3 HMC493LP3E noise Divide-by-4 Static Dividers utilizing InGaP GaAs technology packaged leadless surface mount plastic packages. This device operates from (with square wave input) input frequency from single supply. additive phase noise -150 dBc/Hz offset helps user maintain excellent system noise performance.
Electrical Specifi cations, +25° System, Vcc=
Parameter Maximum Input Frequency Minimum Input Frequency Input Power Range Sine Wave Input. Output Power Reverse Leakage Phase Noise (100 offset) Output Transition Time Supply Current (Icc1 Icc2) Both Outputs Terminated dBm, dBm, Fout Conditions Min. Typ. 18.5 -150 Max. Units dBc/Hz pSec
Divider will operate down square-wave input signal
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC493LP3 493LP3E
v04.0507
GaAs MMIC DIVIDE-BY-4,
Input Sensitivity Window,
Input Sensitivity Window Temperature
FREQUENCY DIVIDERS DETECTORS
INPUT POWER (dBm) INPUT POWER (dBm)
Recommended Operating Window
+25C +25C +85C +85C -40C -40C
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
Output Power Temperature
Phase Noise Performance, Pin= dBm,
PHASE NOISE (dBc/Hz)
OUTPUT POWER (dBm)
-100 -120 -140 -160
-+25C +85C -40C
INPUT FREQUENCY (GHz)
OFFSET FREQUENCY (Hz)
Output Harmonic Content, Pin= dBm,
Reverse Leakage, Pin= dBm,
Both Output Ports Terminated Output Port Terminated
OUTPUT LEVEL (dBm) OUTPUT LEVEL (dBm)
Pfeedthru Harmonic Harmonic
INPUT FREQUENCY (GHz)
INPUT FREQUENCY (GHz)
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC493LP3 493LP3E
v04.0507
GaAs MMIC DIVIDE-BY-4,
FREQUENCY DIVIDERS DETECTORS
Output Voltage Waveform, Pin= dBm, Fout= MHz,
AMPLITUDE (mV) -100 -300 -500 22.7
Absolute Maximum Ratings
Input (Vcc +5V) Supply Voltage (Vcc1, Vcc2) Channel Temperature (Tc) Continuous Pdiss (derate 11.9 mW/° above Thermal Resistance (RTH) (junction ground paddle) Storage Temperature Operating Temperature Sensitivity (HBM) +5.5V °C/W +150 Class
23.1
23.5
23.9
24.3
24.7
TIME (nS)
Typical Supply Current
Vcc1, Vcc2 (mA) 4.75 5.25
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Outline Drawing
Note: Divider will operate over full voltage range shown above
NOTES: LEADFRAME MATERIAL: COPPER ALLOY DIMENSIONS INCHES [MILLIMETERS] LEAD SPACING TOLERANCE NON-CUMULATIVE BURR LENGTH SHALL 0.15mm MAXIMUM. BURR HEIGHT SHALL 0.05mm MAXIMUM. PACKAGE WARP SHALL EXCEED 0.05mm. GROUND LEADS GROUND PADDLE MUST SOLDERED GROUND. REFER HITTITE APPLICATION NOTE SUGGESTED
Package Information
Part Number HMC493LP3 HMC493LP3E Package Body Material Stress Injection Molded Plastic
LAND PATTERN.
Lead Finish Sn/Pb Solder 100% matte
Rating MSL1 MSL1
Package Marking XXXX XXXX
RoHS-compliant Stress Injection Molded Plastic
peak reflow temperature peak reflow temperature 4-Digit number XXXX
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC493LP3 493LP3E
v04.0507
GaAs MMIC DIVIDE-BY-4,
Description
Number 4-9, Function Description connection. Interface Schematic
FREQUENCY DIVIDERS DETECTORS
Input must blocked.
Input 180° phase with differential operation. ground single ended operation.
Divided Output.
Divided output 180° phase with
Vcc1, Vcc2
Supply voltage 0.25V. Connect both pins supply.
Ground: Backside package exposed metal ground slug which must connected RF/DC ground.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC493LP3 493LP3E
v04.0507
GaAs MMIC DIVIDE-BY-4,
FREQUENCY DIVIDERS DETECTORS
Evaluation
List Materials Evaluation 107384
Item Description Mount Connector Capacitor, 0402 Pkg. 1000 Capacitor, 0603 Pkg. Tantalum Capacitor HMC493LP3 HMC493LP3E Divide-by-2 107197 Eval Board
Reference this number when ordering complete evaluation Circuit Board Material: Rogers 4350
circuit board used final application should circuit design techniques. Signal lines should have impedance while package ground leads backside ground slug should connected directly ground plane similar that shown. sufficient number holes should used connect bottom ground planes. evaluation circuit board shown available from Hittite upon request. This evaluation board designed single ended input testing. provide differential output signals.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC493LP3 493LP3E
v04.0507
GaAs MMIC DIVIDE-BY-4,
Application Circuit
FREQUENCY DIVIDERS DETECTORS
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com

v04.0507 GaAs MMIC DIVIDE-BY-4, FREQUENCY DIVIDERS DETECTORS

Top Searches for this datasheet

Other recent searches