v03.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, Isolation: In

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

v03.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, Isolation: In

Datasheet Thumbnail

Top Searches for this datasheet

HMC232LP4 232LP4E
v03.0805
GaAs MMIC SPDT NON-REFLECTIVE SWITCH,
Isolation: Input P1dB Insertion Loss: Typical Non-Reflective Design Package Included HMC-DK005 Designer's
Typical Applications
HMC232LP4 HMC232LP4E ideal for: Telecom Infrastructure Microwave Radio VSAT Military Radios, Radar Test Instrumentation
Functional Diagram
General Description
HMC232LP4 HMC232LP4E broadband high isolation non-reflective GaAs MESFET SPDT switches cost leadless surface mount plastic packages. Covering GHz, switch features isolation isolation GHz. Input P1dB compression typical, while input dBm. switch operates using complementary negative control voltage logic lines -5/0V requires bias supply.
SWITCHES
Parameter
Electrical Specifi cations, +25° With 0/-5V Control, System
Frequency 12.0 12.0 State" 12.0 12.0 12.0 12.0 12.0 Min. Typ. Max. Units
Insertion Loss
Isolation
Return Loss
Return Loss RF1, Input Power Compression
"Off State"
Input Third Order Intercept (Two-Tone Input Power= Each Tone, Tone Separation) Switching Characteristics tRISE, tFALL (10/90% tON, tOFF (50% 10/90%
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC232LP4 232LP4E
v03.0805
GaAs MMIC SPDT NON-REFLECTIVE SWITCH,
Insertion Loss
INSERTION LOSS (dB) FREQUENCY (GHz)
Isolation
FREQUENCY (GHz)
ISOLATION (dB)
SWITCHES
Return Loss
RF1, RF1,
Input Compression Point
RETURN LOSS (dB)
INPUIT P1dB (dBm)
Compression Point Compression Point
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Third Order Intercept Point
INPUIT (dBm) FREQUENCY (GHz)
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC232LP4 232LP4E
v03.0805
GaAs MMIC SPDT NON-REFLECTIVE SWITCH,
Absolute Maximum Ratings
Input Power (Vctl= -5V) (0.5 GHz) Control Voltage Range Channel Temperature Thermal Resistance (RTH) (junction lead) Storage Temperature Operating Temperature Sensitivity (HBM) +1.0V -7.5 °C/W +150 Class
Control Voltages
State High Bias Condition -0.2V Max. Typ. Typ. (±0.5 Vdc)
Truth Table
Control Input High High Signal Path State
SWITCHES
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
Caution: "Hot Switch" power levels greater than (Vctl 0/-5 Vdc).
Outline Drawing
NOTES: LEADFRAME MATERIAL: COPPER ALLOY DIMENSIONS INCHES [MILLIMETERS] LEAD SPACING TOLERANCE NON-CUMULATIVE. BURR LENGTH SHALL 0.15mm MAXIMUM. BURR HEIGHT SHALL 0.05mm MAXIMUM. PACKAGE WARP SHALL EXCEED 0.05mm. GROUND LEADS GROUND PADDLE MUST SOLDERED GROUND. REFER HITTITE APPLICATION NOTE SUGGESTED LAND PATTERN.
Package Information
Part Number HMC232LP4 HMC232LP4E Package Body Material Stress Injection Molded Plastic
Lead Finish Sn/Pb Solder 100% matte
Rating MSL1 MSL1
Package Marking H232 XXXX H232 XXXX
RoHS-compliant Stress Injection Molded Plastic
peak reflow temperature peak reflow temperature 4-Digit number XXXX
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC232LP4 232LP4E
v03.0805
GaAs MMIC SPDT NON-REFLECTIVE SWITCH,
Suggested Driver Circuit
Descriptions
Number Function Description This should connected ground maximize isolation. Interface Schematic
Package bottom must also connected ground. This coupled matched Ohm. Blocking capacitors required line potential equal
RFC, RF1,
truth table control voltage table.
truth table control voltage table.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
SWITCHES
HMC232LP4 232LP4E
v03.0805
GaAs MMIC SPDT NON-REFLECTIVE SWITCH,
Evaluation
SWITCHES
List Materials Evaluation 107723
Item Description Mount Connector 0603 Pkg. HMC232LP4 HMC232LP4E SPDT Switch 107602 Evaluation
Reference this number when ordering complete evaluation Circuit Board Material: Rogers 4350
circuit board used final application should generated with proper circuit design techniques. Signal lines port should have impedance package ground leads package bottom should connected directly ground plane similar that shown above. evaluation circuit board shown above available from Hittite Microwave Corporation upon request.
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com
HMC232LP4 232LP4E
v03.0805
GaAs MMIC SPDT NON-REFLECTIVE SWITCH,
Notes:
SWITCHES
price, delivery, place orders, please contact Hittite Microwave Corporation: Alpha Road, Chelmsford, 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line www.hittite.com

v03.0805 GaAs MMIC SPDT NON-REFLECTIVE SWITCH, Isolation: In

Top Searches for this datasheet

Other recent searches