Download

PDF Abstract Text:

MF1408-01a

CMOS 4-BIT SINGLE CHIP MICROCOMPUTER

MF1408-01a
CMOS 4-BIT SINGLE CHIP MICROCOMPUTER
S5U1C63000P Manual
(S1C63 Family Peripheral Circuit Board)
NOTICE
No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency.
MS-DOS, Windows, Windows 95, Windows 98 and Windows NT are registered trademarks of Microsoft Corporation, U.S.A. PC-DOS, PC / AT, PS / 2, VGA, EGA and IBM are registered trademarks of International Business Machines Corporation, U.S.A. NEC PC-9800 Series and NEC are registered trademarks of NEC Corporation. All other product names mentioned herein are trademarks and / or registered trademarks of their respective owners.
New configuration of product number
Starting April 1, 2001, the configuration of product number descriptions will be changed as listed below. To order from April 1, 2001 please use these product numbers. For further information, please contact Epson sales representative.
Devices S1
Packing specification Specification Package (D: die form F: QFP) Model number Model name (C: microcomputer, digital products) Product classification (S1: semiconductor)
Development tools C 63000 S5U1
Packing specification Version (1: Version 1) Tool type (A1: Assembler Package) Corresponding model number (63000: common to S1C63 Family) Tool classification (C: microcomputer use) Product classification (S5U1: development tool for semiconductor products)
CONTENTS
S5U1C63000P Manual (S1C63 Family Peripheral Circuit Board)
This manual describes how to use the S1C63 Family Peripheral Circuit Board (S5U1C63000P). This circuit board is used to provide emulation functions when it is installed in the ICE (S5U1C63000H1 / S5U1C63000H2), a debugging tool for the 4-bit Single Chip Microcomputer S1C63 Family. This manual describes only the common specifications of the S1C63 Family Peripheral Circuit Board (S5U1C63000P), so refer to the S5U1C63000P Manual (Peripheral Circuit Board for S1C63xxx) for the model dependent specifications. For details on ICE functions and how to operate the debugger, refer to the separately prepared manuals.
Contents
CHAPTER
1.1 1.2 1.3 Outline of S5U1C63000P ....................................... 1 Components of S5U1C63000P ................................... 1 External View of S5U1C63000P .................................. 1
CHAPTER
2.1 2.2 2.3 Installing the S5U1C63000P in the ICE (S5U1C63000H1 / S5U1C63000H2) .... 2 Downloading Cricuit Data 1 - when new ICE (S5U1C63000H2) is used ....... 3 Downloading Cricuit Data 2 - when previous ICE (S5U1C63000H1) is used .... 3
CHAPTER
S5U1C63000P MANUAL (S1C63 FAMILY PERIPHERAL CIRCUIT BOARD)
EPSON
CHAPTER 1: INTRODUCTION
CHAPTER 1
INTRODUCTION
1.1 Outline of S5U1C63000P
The S5U1C63000P provides on a board all the peripheral circuits of S1C63 Family microcomputers other than the core CPU. By installing this board in the ICE (S5U1C63000H1 / S5U1C63000H2) you can use it to emulate each model in the S1C63 Family. This board contains a programmable gate array (FPGA) and supports each model by downloading the circuit data from the host PC to the FPGA via the ICE.
1.2 Components of S5U1C63000P
1.3 External View of S5U1C63000P
IOSEL2
VLCD VSVD VC5
XC4062XLA
RESET
Fig. 1.3.1 External view of S5U1C63000P
S5U1C63000P MANUAL (S1C63 FAMILY PERIPHERAL CIRCUIT BOARD)
EPSON
CHAPTER 2: SETTING UP THE S5U1C63000P
CHAPTER 2
SETTING UP THE S5U1C63000P
2.1 Installing the S5U1C63000P in the ICE (S5U1C63000H1 / S5U1C63000H2)
(1) Unfasten the screws located on the left and right sides of the front panel of the ICE (S5U1C63000H1 / S5U1C63000H2) by turning them counterclockwise, then remove the front panel. (2) Insert the S5U1C63000P board into the ICE along the its uppermost guide rails until the tip of the board touches the back of the ICE. If some other board is mounted on the uppermost guide rails, remove that board by using the jig supplied with the ICE before you insert the S5U1C63000P board (see Figure 2.1.3). (3) Once the S5U1C63000P board has been inserted almost fully into the ICE, secure it in position by using the jig supplied with the ICE (see Figure 2.1.2). (4) When the above is done, replace the front panel.
S5U1C63000P board
Fig. 2.1.1 Installing the S5U1C63000P board in the ICE (S5U1C63000H1 / S5U1C63000H2)
· Installing the S5U1C63000P board
Set the jig included with the ICE into position as shown in Figure 2.1.2. Using this jig as a lever, push it toward the inside of the board evenly on the left and right sides. After confirming that the S5U1C63000P board has been firmly fitted into the internal slot of the ICE, remove the jig. Fig. 2.1.2 Installing the S5U1C63000P board
S5U1C63000P board
· Dismounting the S5U1C63000P board
Set the jig included with the ICE into position as shown in Figure 2.1.3. Using this jig as a lever, push it toward the outside of the board evenly on the left and right sides. After confirming that the S5U1C63000P board has been dismounted from the backboard connector, pull the S5U1C63000P board out of the ICE. Fig. 2.1.3 Dismounting the S5U1C63000P board
S5U1C63000P board
EPSON
S5U1C63000P MANUAL (S1C63 FAMILY PERIPHERAL CIRCUIT BOARD)
CHAPTER 2: SETTING UP THE S5U1C63000P
2.2 Downloading Circuit Data 1 - when new ICE (S5U1C63000H2) is used
The downloading takes about 15 minutes. 5) Terminate the debugger and then turn the ICE off. 6) Set the DIP switch "IOSEL2" on this board to the "D" position. 7) Turn the ICE on and invoke the debugger again. Debugging can be started here.
2.3 Downloading Circuit Data 2 - when previous ICE (S5U1C63000H1) is used
The standard ICE (S5U1C63000H1, previous model) did not support the circuit data download function for this board. To use the download function, update the ICE firmware according to the following procedure. 1) Set the baud rate of the ICE to 9600 bps. Refer to the manual supplied with the ICE for setting the DIP switch. 2) Connect the ICE to the host PC and then start up the host PC in DOS. When Windows is running, restart in DOS mode.
Note: Do not use the DOS prompt of Windows.
EPSON
S5U1C63000P MANUAL (S1C63 FAMILY PERIPHERAL CIRCUIT BOARD)
CHAPTER 3: PRODUCT SPECIFICATIONS
CHAPTER 3
S5U1C63000P
Dimension: Weight: Power supply:
PRODUCT SPECIFICATIONS
The specifications of the S5U1C63000P are listed below.
I / O connection cable (80-pin)
S5U1C63000P connector: Cable connector (80-pin): Cable connector (40-pin): Cable: Interface: Length: KEL8830E-080-170L KEL8822E-080-171 3M7940-6500SC 40-pin flat cable CMOS interface (3.3 V) Approx. 40 cm
1 pair 1 pair
I / O connection cable (100-pin)
S5U1C63000P connector: Cable connector (100-pin): Cable connector (50-pin): Cable: Interface: Length: KEL8830E-100-170L KEL8822E-100-171 3M7950-6500SC 50-pin flat cable CMOS interface (3.3 V) Approx. 40 cm
1 pair 1 pair
Accessories
EPSON
S5U1C63000P MANUAL (S1C63 FAMILY PERIPHERAL CIRCUIT BOARD)
International Sales Operations
AMERICA
EPSON ELECTRONICS AMERICA, INC. - HEADQUARTERS 150 River Oaks Parkway San Jose, CA 95134, U.S.A. Phone: +1-408-922-0200 Fax: +1-408-922-0238
EPSON (CHINA) CO., LTD.
23F, Beijing Silver Tower 2# North RD DongSanHuan ChaoYang District, Beijing, CHINA Phone: 64106655 Fax: 64107319
SHANGHAI BRANCH
4F, Bldg., 27, No. 69, Gui Jing Road Caohejing, Shanghai, CHINA Phone: 21-6485-5552 Fax: 21-6485-0775
- SALES OFFICES West
1960 E. Grand Avenue EI Segundo, CA 90245, U.S.A. Phone: +1-310-955-5300 Fax: +1-310-955-5400
EPSON HONG KONG LTD.
20 / F., Harbour Centre, 25 Harbour Road Wanchai, Hong Kong Phone: +852-2585-4600 Fax: +852-2827-4346 Telex: 65542 EPSCO HX
Central
101 Virginia Street, Suite 290 Crystal Lake, IL 60014, U.S.A. Phone: +1-815-455-7630 Fax: +1-815-455-7633
EPSON TAIWAN TECHNOLOGY & TRADING LTD.
10F, No. 287, Nanking East Road, Sec. 3 Taipei Phone: 02-2717-7360 Fax: 02-2712-9164 Telex: 24444 EPSONTB
Northeast
301 Edgewater Place, Suite 120 Wakefield, MA 01880, U.S.A. Phone: +1-781-246-3600 Fax: +1-781-246-5443
HSINCHU OFFICE Southeast
3010 Royal Blvd. South, Suite 170 Alpharetta, GA 30005, U.S.A. Phone: +1-877-EEA-0020 Fax: +1-770-777-2637 13F-3, No. 295, Kuang-Fu Road, Sec. 2 HsinChu 300 Phone: 03-573-9900 Fax: 03-573-9169
EPSON SINGAPORE PTE., LTD.
EUROPE
EPSON EUROPE ELECTRONICS GmbH - HEADQUARTERS Riesstrasse 15 80992 Munich, GERMANY Phone: +49-(0)89-14005-0 Fax: +49-(0)89-14005-110
No. 1 Temasek Avenue, #36-00 Millenia Tower, SINGAPORE 039192 Phone: +65-337-7911 Fax: +65-334-2716
SEIKO EPSON CORPORATION KOREA OFFICE
50F, KLI 63 Bldg., 60 Yoido-dong Youngdeungpo-Ku, Seoul, 150-763, KOREA Phone: 02-784-6027 Fax: 02-767-3677
SALES OFFICE
Altstadtstrasse 176 51379 Leverkusen, GERMANY Phone: +49-(0)2171-5045-0 Fax: +49-(0)2171-5045-10
SEIKO EPSON CORPORATION ELECTRONIC DEVICES MARKETING DIVISION Electronic Device Marketing Department IC Marketing & Engineering Group
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5816 Fax: +81-(0)42-587-5624
UK BRANCH OFFICE
Unit 2.4, Doncastle House, Doncastle Road Bracknell, Berkshire RG12 8PE, ENGLAND Phone: +44-(0)1344-381700 Fax: +44-(0)1344-381701
ED International Marketing Department Europe & U.S.A. FRENCH BRANCH OFFICE
ED International Marketing Department Asia
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN Phone: +81-(0)42-587-5814 Fax: +81-(0)42-587-5110
BARCELONA BRANCH OFFICE Barcelona Design Center
S5U1C63000P Manual
(S1C63 Family Peripheral Circuit Board)
ELECTRONIC DEVICES MARKETING DIVISION
EPSON Electronic Devices Website
http://www.epson.co.jp / device /
Issue May, 2001 Printed in Japan M A