Download

PDF Abstract Text:

American Opto Plus LED SMC / A-282LYG G / W

0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type

American Opto Plus LED SMC / A-282LYG G / W
0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type
Package Dimensions
Notes: 1. All dimensions are in millimeters
Feb. 2005 Rev. 1.0
American Opto Plus LED SMC / A-282LYG G / W
0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type
Internal Circuit Diagram
COMMON ANODE
COMMON CATHODE
Feb. 2005 Rev. 1.0
American Opto Plus LED SMC / A-282LYG G / W
0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type
DEVICE SELECTION GUIDE
Part Number SMC / A-282LYG G / W Chip Material AlInGaP / GaAs Emitted Color Green Face / Segment Gray / White
ABSOLUTE MAXIMUM RATINGS
Parameter
Power Dissipation per segment Derating Linear From 25°C per segment Peak Current per segment (1 / 10 Duty Cycle @1KHz ) Continuous Forward Current per segment Reverse Voltage Operating Temperature Range Storage Temperature Range
Symbol
PAD -IAF IPF VR TOPR TSTG
Max Rating
Solder temperature 1.6 mm from body for 3 seconds at 260°C
OPTICAL-ELECTRICAL CHARACTERISTICS
Parameter
Ave. Luminous Intensity Ave. Luminous Intensity Forward Voltage / segment Reverse Current / segment Spectrum Line Half-Width Emission Wavelength
Symbol Test Condition
mcd mcd V uA nm nm
Feb. 2005 Rev. 1.0
American Opto Plus LED SMC / A-282LYG G / W
0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type
Typical Electro-Optical Characteristic Curves (Ambient Temperature: 25°C)
Relative Luminous Intensity vs. Wavelength Forward Current vs. Forward Voltage
Allowable DC Current vs. Ambient Temperature
Relative Intensity vs. Forward Current
Feb. 2005 Rev. 1.0
American Opto Plus LED SMC / A-282LYG G / W
0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type
SMT SOLDERING INSTRUCTION
Number of reflow process shall be less than 2 times, and cooling process to normal temperature is required between the first and the second soldering process.
RECOMMENDED SOLDERING PATTERN (UNIT: mm)
Feb. 2005 Rev. 1.0
American Opto Plus LED SMC / A-282LYG G / W
0.28inch (7.0 mm) digit height Low power consumption RoHS Compliance Case mold type
TAPE and REEL SPECIFICATION (UNIT: mm)
Feb. 2005 Rev. 1.0