TRANSISTORS THYRISTORS DIODES LEDS Diode Thyristor SANKEN EL
|
|
|
Top Searches for this datasheet
SEMICONDUCTORS GENERAL CATALOG
TRANSISTORS THYRISTORS DIODES LEDS
Diode Thyristor
SANKEN ELECTRIC CO., LTD.
Warning
contents this document subject changes, improvement other purposes,
without notice. Make sure that this latest version document before use.
operation circuit examples this document provided reference purposes
only. Sanken assumes liability violation industrial property, intellectual property, other rights Sanken third parties, that stem from these examples.
user must take responsibility considering determining which objects
products this document used with.
Although will continue improve quality reliability products,
semiconductor products, their nature, have certain fault failure rates. user must take responsibility designing checking secure device system that part failure lead human injury, fire, damages, other losses.
products this document intended normal electronic devices (such home
appliances, office equipment, communication terminals, measurement devices). Make delivery specifications with before use. considering using products device that requires high reliability (such transport machines their control units, traffic light control systems, disaster prevention, security equipment kind safety equipment), make sure that consult sales representative make delivery specifications with these products devices that require extremely high reliability (such aerospace instruments, nuclear power control units, life support systems) without written consent.
products this document designed radiation-proof. contents this document must transcribed copied without written consent. Gallium arsenide (GaAs) used some products this document.
Burning breaking such products, well accidental inhalation ingestion chemically treated liquids gases, extremely dangerous.
SANKEN SEMICONDUCTORS
Regulator 1-1-1 1-1-2 Linear Regulator Switching Mode Regulator
1-1-3 Multi-Output Type Regulator Motor Driver 1-2-1 1-2-2 1-2-3 1-2-4 2-Phase Stepper Motor Unipolar Driver 3-Phase Stepper Motor Driver 5-Phase Stepper Motor Driver High Voltage 3-Phase Motor Driver
Transistors
Transistors FETs Transistors FETs Arrays
Thyristors
Thyristors Triacs
Diodes
Rectifier Diodes Fast Recovery Diodes Ultrafast Recovery Diodes Schottky Barrier Diodes High Voltage Rectifier Diodes Power Zener Diodes Silicon Varistors
LEDs
Visible Light LEDs Infrared LEDs
Part Number Index Discontinued Service Parts
Ordering Information Standard Packing Quantities Regulator Selection Guide 1-1-1 Linear Regulator Application Note 1-1-2 Switching Mode Regulator Application Note 1-1-3 Multi-Output Type Regulator Application Note Motor Driver Selection Guide Application Note 1-2-1 1-2-2 1-2-3 1-2-4 2-Phase Stepper Motor Unipolar Driver 3-Phase Stepper Motor Driver 5-Phase Stepper Motor Driver High-voltage 3-phase Motor Driver
Ordering Information
products listed must ordered standard packing increments.
Series Name/ Product Name PG001M SCM1100M SDK03M SI-3000B SI-3000C SI-3000J SI-3000KD SI-3000KFE SI-3000KM SI-3000KS SI-3000KWF SI-3000KWM SI-3000LSA SI-3000LU SI-3000ZD SI-3000ZFE SI-3010LLSL SI-7510 SI-8000E SI-8000FD SI-8000FFE SI-8000GL SI-8000HD SI-8000HFE SI-8000JD SI-8000JF SI-8000S SI-8000SD SI-8000TFE SI-8000SI-8000W SI-8011NVS SI-8400L Package DIP16 PS4(Surface-mount) PS16(Surface-mount) TO220F-5 TO220F-5 TO220F-5 TO263-5(Surface-mount) TO220F-5 TO252-5(Surface-mount) SOP8(Surface-mount) TO220F-5 TO252-5(Surface-mount) SOP8(Surface-mount) SOT89-5(Surface-mount) TO263-5(Surface-mount) TO220F-5 SOP8(Surface-mount) DIP30 TO220F-5 TO263-5(Surface-mount) TO220F-5 DIP8 TO263-5(Surface-mount) TO220F-5 TO263-5(Surface-mount) TO220F-5 TO220F-5 TO263-5(Surface-mount) TO220F-5 TO252-5(Surface-mount) SOP8(Surface-mount) TSSOP24 Non-package type (EI-12.5 core) SI-8405NH SI-8405NL SI-8500L SOP8(Surface-mount) SOP8(Surface-mount) Non-package type (EI-19 core) SI-8511NVS SLA6805MP/ SLA6816MP SLA6848MP TSSOP24 SLA23Pin LF.No.2151/2152:648 LF.No.2153:540 LF.No.2171:648 2800 1000 1000 Standard Packing Quantities Bulk 1000 2000 2000 2000 600/2000 2000 600/2000 2000 600/2000 600/2000 2000 2000 600/2000 Taping 2000 1200 3000 1000 3000 1000 1000 1000 3000 1000 2800 SMA6843MP SMA7022MU/ 7029M SMA7036M SPI-8000A SPI-8000TW STA801M STA810M STA820M SMA24Pin ZIP15 (SMA15Pin) ZIP15(SMA15Pin) HSOP16 HSOP16 SIP10(STA10Pin) SIP8(STA8Pin) SIP8(STA8Pin) SMA682xM SLA707xMR/ SLA7611M SLA706xM SLA7042M/ 7044M SLA705xM Series Name/ Product Name SLA7022MU/ 7029M SLA7024M/ 7026M/7027MU SLA703xM Package ZIP15 with (SLA15Pin) ZIP18 with (SLA18Pin) ZIP18 with (SLA18Pin) ZIP18 with (SLA18Pin) ZIP18 with (SLA18Pin) ZIP21 with (SLA21Pin) ZIP23 with (SLA23Pin) ZIP18 with (SLA18Pin) SMA24Pin Standard Packing Quantities Bulk 1080 Taping
1080
1080
1080
1080
1080
1080
1080
LF.No.2451:1080 LF.No.2452:1008 LF.No.2452:1008 1440
1440
1400 1400
SLA24Pin
Regulator
Selection Guide
Linear Regulator (low dropout voltage, built-in overcurrent, thermal protection circuits)
Surface-Mount Type
Output Current Series Name SI-3000LU SI-3000LSA SI-3000KS SI-3000KM SI-3000KD SI-3000LLSL SI-3000ZD 0.25 Output Voltage Variable (Reference Voltage) 1.25 1.28 SOT89-5 SOP8 SOP8 TO252-5 TO263-5 SOP8 TO263-5 Package Current Consumption During Output ON/OFF Overcurrent Protection Characteristic Drooping Foldback Drooping Foldback*1 Foldback*2 Foldback Foldback Page
Drooping SI-3012KM/3025KM/3033KM Drooping SI-3012KD/3033KD
Thru-Hole Type
Output Current Series Name SI-3000B SI-3000KFE SI-3000C SI-3000J SI-3000ZFE 0.27 Output Voltage 15.7 Variable (Reference Voltage) 2.55 TO220F-5 TO220F-5 TO220F-5 TO220F-5 TO220F-5 Package Current Consumption During Output ON/OFF Overcurrent Protection Characteristic Foldback Foldback Foldback*3 Foldback Foldback Page
*3:Drooping SI-3033C
Regulator
Switching Mode Regulator (built-in overcurrent, thermal protection circuits)
Surface-Mount Type
Output Current Series Name SI-8000W SI-8000JD SI-8000SI-8000SD SPI-8000A SI-8005Q* SI-8001FDE SI-8001FDL SI-8008HD SOP8 TO263-5 TO252-5 TO263-5 HSOP16 HSOP8 TO263-5 TO263-5 TO263-5 Drooping Foldback Drooping Drooping Foldback Drooping Drooping Drooping Drooping Drooping Output Voltage Variable (Reference Voltage) Maximum Input Voltage Package Current Consumption During Output ON/OFF Overcurrent Protection Characteristic Page
Thru-Hole Type
Output Current Series Name SI-8000E SI-8000JF SI-8000TFE SI-8000GL SI-8000S SI-8100QL*2 SI-8000FFE SI-8000HFE Output Voltage Variable (Reference Voltage) Maximum Input Voltage 43*1 TO220F-5 TO220F-5 TO220F-5 DIP8 TO220F-5 DIP8 TO220F-5 TO220F-5 Package Current Consumption During Output ON/OFF
*:Current Mode Control
Overcurrent Protection Characteristic Drooping Foldback Drooping Foldback Drooping Drooping Drooping Drooping
Page
SI-8033S
Surface-Mount, Synchronous Rectifier Type
Oscillation Frequency Series Name (kHz) SI-8011NVS SI-8405NL SI-8511NVS SI-8405NH Variable (Reference Voltage) Maximum Input Voltage TSSOP24 SOP8 TSSOP24 SOP8 Package Current Consumption During Output ON/OFF
*2:Current Mode Control
Overcurrent Protection Characteristic Foldback Drooping Foldback Drooping
Page
Flywheel Diode (Schottky-Barrier Diode) Built-in Type
Output Current Series Name STA810M STA820M Output Voltage Maximum Input Voltage SIP8 (STA8Pin) SIP8 (STA8Pin) Package Current Consumption During Output ON/OFF Overcurrent Protection Characteristic Foldback Drooping Page
L-Combined Type
Output Current Series Name SI-8400L SI-8500L Output Voltage Maximum Input Voltage Non-package type (EI-12.5 core) Non-package type (EI-19 core) Package Current Consumption During Output ON/OFF Overcurrent Protection Characteristic Drooping Drooping Page
Regulator
Multi Output Type Regulator
2-Output Type
Output Voltage Series Name STA801M SPI-8001TW SPI-8002TW SPI-8003TW SI-3003KWF SI-3002KWM TO252-5 Linear type Variable(1.0-24V) TO220F-5 Linear type Variable(1.0-24V) Variable(1.0-24V) HSOP16 Step-down switching type Variable(1.0-16V) Variable(1.0-24V) HSOP16 Step-down switching type Select from 11.5, 12.1 15.5 Variable(1.0-16V) SIP10 (STA10Pin) Step-down switching type Drooping Foldback Foldback Foldback Foldback Foldback Foldback Foldback Foldback Foldback Foldback Step-down switching type Output Current Package Regulator Type Functions Thermal Overcurrent Protection Protection Drooping ON/OFF Control Current Consumption During Built i-in flywheel diode (Schottky-barrier diode) Built i-in flywheel diode (Schottky-barrier diode) Remarks Page
HSOP16
Step-down switching type
Frequency Variable
1-1-1 Linear Regulator
Application Note
Heat dissipation Reliability
reliability highly dependent operating temperature. Please sure apply silicone grease mount heatsink with proper mounting torque. Heatsink design should particular attention ensuring sufficient heat dissipation capacity. addition, please take into account convection operation.
Mounting Torque
SI-3000B SI-3000C SI-3000J SI-3000KFE SI-3000ZFE
0.588 0.686
Calculating Internal Power Dissipation(PD)
given following formula: PD=IO [VIN(mean)-VO] Determine size heatsink according relationship between allowable power dissipation ambient temperature.
Recommended Silicone Grease
Shin-Etsu Chemical Co., Ltd.: G746 Momentive Performance Materials Inc.: YG-6260 Corning Toray Silicones Co., Ltd.: SC102 Please select proper silicone grease carefully since some grease products penetrate device result extremely short device life.
Setting Input Voltage
following waveform input voltage.
Others
Devices operated parallel connection aiming larger current. Diodes isolation purpose provided between input ground, also between output ground. They broken down device reverse biased. this case, please clamp device with diodes protect them.
Input Ripple
(mean)
(max.)
(min.)
When setting input voltage, please follow instructions below: Make VIN(min) (Output voltage) (Minimum dropout voltage) Make VIN(max) input voltage shown "Absolute Maximum Ratings"
Rectifier Diodes Power Supplies
rectify input voltage using rectifier diodes power supplies, please SANKEN rectifier diodes shown following list. (Please center-tap bridge configuration using stand-alone type diodes.)
Series Name SI-3000B Series SI-3000C Series SI-3000J Series SI-3000ZD Series SI-3000KD Series SI-3000KFE Series SI-3000KM Series SI-3000KS Series SI-3000LLSL Series SI-3000LSA Series SI-3000LU Series SI-3000ZFE Series Diodes AM01Z(Axial Type, VRM:200V, IO:1.0A) RM2Z(Axial Type,VRM:200V,IO:1.2A) SJPM-H2(Surface-Mount Stand-Alone Type,VRM:200V,IO:2.0A) RM2Z(Axial Type,VRM:200V,IO:1.2A)
Thermal Design
maximum junction temperature Tj(max) given absolute maximum ratings specific each product type must strictly observed. Thus, thermal design must consider maximum power dissipation PD(max), which varies conditions use, maximum ambient temperature Ta(max). simplify thermal design, Ta-PD characteristic graphs provided herein. Please observe following steps heatsink design: Obtain maximum ambient temperature Ta(max). Obtain maximum power dissipation PD(max). Look intersection point Ta-PD characteristic graph determine size heatsink. Although heatsink size obtained, actual applications, 10-to-20% derating factor generally introduced. Moreover, heat dissipation capacity heatsink highly depends mounted. Thus, recommended measure heatsink case temperature actual operating environment. Please refer Ta-PD characteristic graphs respective product types.
SJPM-H2(Surface-Mount Stand-Alone Type,VRM:200V,IO:2.0A) SJPM-H2(Surface-Mount Stand-Alone Type,VRM:200V,IO:2.0A) RM2Z(Axial Type,VRM:200V,IO:1.2A)
1-1-1 Linear Regulator
SI-3000LU Series Surface-Mount, Current Consumption, Dropout Voltage Linear Regulator
Features
Compact surface-mount package (SOT89-5) Output current: current consumption (OFF) dropout voltage: VDIF Output voltage range (1.5V 15V) Built-in drooping-type-overcurrent thermal protection circuits
Absolute Maximum Ratings
Parameter Input Voltage Output control terminal voltage Output Current Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (Junction Ambient Air) Symbol PD*1 Tj*2 Tstg*2 Ratings 0.75 +135 +125 Unit °C/W
(Ta=25°C)
j-a*1
When mounted glass-epoxy board (copper laminate area 2%). Thermal protection circuits operate junction temperature exceeds 135°C.
Applications
Auxiliary power supplies Battery-driven electronic equipment
Recommended Operating Conditions
Ratings Parameter Input Voltage Output Current Operating Ambient Temperature Symbol min.
max. VO+2*1
Unit
(max) (max) restricted relation (VIN Calculate these values referring reference data page Refer Dropout Voltage parameter. SI-3012LU, input voltage secure minimum voltage explained "Setting Input Voltage" section Linear Regulator Application Note.
Electrical Characteristics
Ratings Parameter Symbol min. Reference Voltage VADJ Conditions VDIF Dropout Voltage Conditions Conditions VLINE Line Regulation Conditions VLOAD Load Regulation Conditions Temperature Coefficient Reference Voltage Ripple Rejection Conditions Quiescent Circuit Current Circuit Current Output Overcurrent Protection Starting Current*1 Control Voltage (Output Terminal ON)*2 Control Voltage (Output OFF)*2 Control Current (Output Control Current (Output OFF) Conditions Iq(OFF) Conditions Conditions Conditions Conditions VC=2V VC=2V VIN=VO VIN=VO+1V, VC=0V VIN=VO+1V, =0mA VC=2V, R2=100k VADJ/Ta Conditions RREJ VIN=VO +1V, IO=1 250mA( O=3.3V) ±0.3 Tj=0 100°C VIN=VO f=100 120HZ( VO=3.3V) VIN=VO+1 VO+5V, IO=10mA( VO=3.3V) IO=100mA(VO =3.3V) 1.210 SI-3012LU(Variable) typ. 1.250 VIN=VO+1V, =10mA
(Ta=25°C, VC=2V unless otherwise specified) Unit max. 1.290 IO=250mA(VO =3.3V)
specified drop point output voltage condition that Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs.
SI-3000LU Series
External Dimensions (SOT89-5)
4.5±0.05 1.6±0.05 4.2±0.05 4.2±0.05 4.2±0.05 0.4±0.03 0.1±0.05
(Unit
2.5±0.05
4.3±0.05
±0.0
Assignment Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.05g
0.40
1.5±0.05
1.5±0.05
Block Diagram
SI-3012LU
0.4±0.05
1.5±0.05
0.90±0.1
4.2±0.05
4.7±0.05
4.2±0.05
0.90±0.1
Standard External Circuit
SI-3012LU
Load
Output capacitor larger) SI-3000LU series, capacitor such ceramic capacitor. CIN: Input capacitor approx.) Setting SI-3012LU output voltage (recommended voltage: Resistors output setting output voltage connecting shown diagram left. recommended R1=(VO-VADJ)/(VADJ/R2)
Reference Data
Copper Laminate Area Power Dissipation Tj=100°C size
Ta=25°C
Ta=40°C Ta=60°C Ta=85°C
Power Dissipation
monolithic mounts inner frame stage that connected (pin Therefore, enlarging copper laminate area connected improves heat radiation effect. Obtaining junction temperatureMeasure temperature lead part (pin with thermocouple, etc. Then, substitute this value following formula obtain junction temperature. j-c+Tc j-c=5 C/W)
1000
Copper Laminate Area (mm2)
Case temperature measurement point
1-1-1 Linear Regulator
SI-3000LSA Series
Features
Compact surface-mount package (SOP8) Output current:
Surface-Mount, Current Consumption, Dropout Voltage Linear Regulator
Absolute Maximum Ratings
Parameter Input Voltage Output control terminal voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (Junction Lead (pin Thermal Resistance (Junction Ambient Air) Symbol PD1*1 PD2*2 Tj*3 Tstg Ratings 1.16 +150 +150 +150 Unit °C/W °C/W (Ta=25°C)
circuit current output OFF: Iq(OFF) dropout voltage: VDIF0.8 VDIF SI-3018LSA types output voltages (1.8 available Output ON/OFF control terminal voltage compatible with LS-TTL Built-in foldback-type-overcurrent thermal protection circuits
When mounted glass-epoxy board 56.5 56.5 (copper laminate area 100%). When mounted glass-epoxy board (copper laminate area 100%). Thermal protection circuits activated junction temperature exceeds 135°C.
Applications
Auxiliary power supplies Battery-driven electronic equipment
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range Operating Junction Temperature Operating Ambient Temperature Symbol Tjop Taop SI-3018LSA 3.5*1 SI-3025LSA
SI-3033LSA
SI-3050LSA
Unit
3.5*1
5.2*1
+125
(max) (max) restricted relation (VIN Please calculate these values referring reference data page Refer Dropout Voltage parameter.
Electrical Characteristics
Ratings Parameter Symbol min. Output Voltage Conditions VDIF Dropout Voltage Conditions Conditions Line Regulation Load Regulation Temperature Coefficient Output Voltage Ripple Rejection Quiescent Circuit Current Circuit Current Output Overcurrent Protection Starting Current*1,3 Control Voltage (Output Terminal ON)*2 Control Voltage (Output OFF)*2 Control Current (Output Control Current (Output OFF) VLINE Conditions VOLOAD Conditions VO/Ta Conditions RREJ Conditions Conditions Iq(OFF) Conditions Conditions Conditions Conditions VC=0V VIN=3.3V VC=2V ±0.3 VIN=3.3V, IO=5mA, Tj=0 100°C VIN=3.3V, f=100 120HZ VIN=3.3V, IO=0A VIN=3.3V, IO=0A, VC=0V VIN=3.3V ±0.3 VIN=3.3V, IO=5mA, Tj=0 100°C VIN=3.3V, f=100 120HZ VIN=3.3V, IO=0A VIN=3.3V, IO=0A, VC=0V VIN=5V VIN=3.1 3.5V, IO=0.3A VIN=3.3V, IO=0 VIN=3.1 3.5V, IO=0.3A VIN=3.3V, IO=0 1.764 SI-3018LSA typ. 1.800 IO0.5A IO1A ±0.3 VIN=5V, IO=5mA, Tj=0 100°C VIN=5V, f=100 120HZ VIN=5V, IO=0A VIN=5V, IO=0A, VC=0V max. 1.836 min. 2.450 SI-3025LSA typ. 2.500 max. 2.550 IO0.5A min. 3.234 SI-3033LSA typ. 3.300 max. 3.366
(Ta=25°C, VC=2V unless otherwise specified) SI-3050LSA min. 4.90 typ. 5.00 max. 5.10 IO0.5A VIN=6 IO=0.3A VIN=6.5V, IO=0 ±0.5 VIN=6.5V, IO=5mA, Tj=0 100°C VIN=6.5V, f=100 120HZ VIN=6.5V, IO=0A VIN=6.5V, IO=0A, VC=0V VIN=6V Unit
VIN=3.3V, IO=0.5A
VIN=3.3V, IO=0.5A
VIN=5V, IO=0.5A
VIN=6.5V, IO=0.5A
VIN=4.5 5.5V, IO=0.3A VIN=5V, IO=0
specified drop point output voltage condition that SI-3033LSA), Output when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. These products cannot used following applications. Because these applications require certain current start-up built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
SI-3000LSA Series
External Dimensions (SOP8)
5.1±0.4 1.27 0.4±0.1 0.15+0.1 -0.05
0.5±0.1
(Unit
0.995max.
1.55±0.15 1.5±0.1
1.27
Assignment (Leave open) Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.1g
4.4±0.2
0.10 0.4±0.1 0.12
Block Diagram
0.05±0.05
Typical Connection Diagram
Reference Data
Copper Laminate Area Junction Ambient Thermal Resistance
Load
Output capacitor larger) CIN: Input capacitor This capacitor required case inductive input line long wiring. Tantalum capacitors recommended particularly temperatures. Leave open.
Allowable Output Current (vs. VIN-VOUT Voltage Difference) VIN-IO
(glass-epoxy, 160mm
120°C (20% derating 150°C)
Iout (max)
(°C/W)
j-a=100°C/W
inner frame stage, which mounted, directly connected VOUT pin. Therefore, enlarging copper laminate area around VOUT really effective heat radiation.
Ta=25°C Ta=85°C
1000 5000
Copper Laminate Area
VIN-VOUT Voltage Difference
1-1-1 Linear Regulator
SI-3000KS Series Surface-Mount, Current Consumption, Dropout Voltage Linear Regulator
Features
Compact surface-mount package (SOP8) Output current: Compatible with capacitor circuit current output current consumption (OFF) dropout voltage VDIF types output voltages (2.5 variable type) available Output ON/OFF control terminal voltage compatible with LS-TTL Built-in drooping-type-overcurrent thermal protection circuits
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (Junction Ambient Air) Thermal resistance (Junction Lead (pin Symbol VIN*1 IO*1 PD*1, Tstg Ratings 0.76 +125 +125 Unit °C/W °C/W
(Ta=25°C)
j-a*
(max) (max) restricted relation (VIN Please calculate these values referring Copper laminate area Power dissipation data shown hereinafter. When mounted glass epoxy board 1600 (copper laminate area 2%).
Applications
Local power supplies Battery-driven electronic equipment
Electrical Characteristics
Ratings Parameter Input Voltage Output Voltage (Reference voltage VADJ SI-3012KS) Symbol (VADJ) Conditions VDIF Dropout Voltage Conditions Conditions Line Regulation Load Regulation Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current*2 Control Voltage (Output ON)*3 Control Voltage (Output OFF) Terminal Control Current (Output Control Current (Output OFF) VOLINE Conditions VOLOAD Conditions Conditions (OFF) Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions VC=2V VC=0V VIN=3.3V (VO=2.5V) VIN=3.3V, VC=0V ±0.3 Tj=0 100°C (VO=2.5V) =3.3V, f=100 120HZ (VO=2.5V) VIN=3.3V IO=0.5A (VO=2.5V) IO=1A (VO=2.5V) VIN=3.3 IO=10mA (VO=2.5V) VIN=3.3V, IO=0 (VO=2.5V) VIN=3.3V, IO=0A, VC=2V, R2=24k VIN=3.3V, VC=0V ±0.3 Tj=0 100°C VIN=3.3V, f=100 120HZ VIN=3.3V, IO=0A, VC=2V VIN=3.3V, IO=0 VIN=3.3 IO=10mA IO=1A SI-3012KS (variable type) min. 1.24 1.28 VIN=3.3V, IO=10mA IO=0.5A 1.32 typ. max. min.
(Ta=25°C, Vc=2 unless otherwise specified)
SI-3025KS typ. 2.50 VIN=3.3V, IO=10mA IO=0.5A IO=1A VIN=5 10V, IO=10mA VIN=5V, IO=0 VIN=5V, IO=0A, VC=2V VIN=5V, VC=0V ±0.3 100°C VIN=5V, f=100 120HZ VIN=5V max. 2.55 min.
SI-3033KS typ. 3.300 VIN=5V, IO=10mA max.
Unit 3.366
2.45
3.234
Refer Dropout Voltage parameter. specified drop point output voltage condition that Output when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs.
SI-3000KS Series
External Dimensions (SOP8)
5.1±0.4 1.27 0.4±0.1 0.15+0.1 -0.05
0.5±0.1
(Unit Assignment Sence (ADJ SI-3012KS) Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx.
4.4±0.2
0.10 0.4±0.1 0.12
Block Diagram
SI-3012KS
VOUT
0.05±0.05
1.55±0.15
1.5±0.1
0.995max.
1.27
SI-3025KS, SI-3033KS
VOUT
Sense
Typical Connection Diagram
SI-3012KS
SI-3025KS, SI-3033KS
Load
sense
Load
Output voltage setting resistors output voltage connecting shown above. recommended value
CIN: Input capacitor larger) Output capacitor larger) SI-3000KS series, capacitor. When using electrolytic capacitor, SI-3000KS series oscillate temperature.
R1=(VO-VADJ)÷(VADJ/R2)
Reference Data
Copper Laminate Area Thermal Resistance
Area board
Copper Laminate Area Power Dissipation
Tj=100°C Area board Ta=25°C
Thermal resistance (°C/W)
Power dissipation
Ta=50°C Ta=80°C
Obtaining junction temperature Measure temperature lead part (pin with thermocouple, etc. Then, substitute this value following formula obtain junction temperature.
Tj=PD
22°C/W)
Copper laminate area (mm2) (GND terminal)
1000
Copper laminate area (mm2) (GND terminal)
1000
1-1-1 Linear Regulator
SI-3000KM Series Surface Mount, Current Consumption, Dropout Voltage Linear Regulator
Features
Compact surface mount package (TO252-5) Output current: dropout voltage: VDIF current consumption: (600 circuit current output OFF: (OFF) Built-in overcurrent thermal protection circuits Output ON/OFF control function Compatible with capacitors (SI3012KM/SI-3025KM/SI-3033KM)
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (Junction Ambient Air) Thermal Resistance (Junction case) Symbol PD*2 Tstg SI-3012KM/ 3025KM/3033KM +125 +125
Absolute Maximum Ratings
Ratings SI-3010KM/3050KM/ 3090KM/3120KM 35*1
(Ta=25°C) Unit °C/W °C/W
j-a*2
built-in input-overvoltage-protection circuit shuts down output voltage Input Overvoltage Shutdown Voltage electrical characteristics. When mounted glass-epoxy board 900mm2 (copper laminate area 4.3%).
Applications
Secondary stabilized power supply (local power supply)
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range Operating Ambient Temperature Operating Junction Temperature Symbol SI-3012KM 2.4*2 6.0*1 SI-3025KM 2.4*2 SI-3033KM
SI-3010KM 2.4*2 27*1 +100
SI-3050KM 2.4*2 17*1
SI-3090KM
SI-3120KM
Unit
20*1
25*1
(max) (max) restricted according operating conditions relation (VIN-VO) Please calculate these values referring Copper Laminate Area Power Dissipation data shown hereinafter. Refer Dropout Voltage parameter.
Electrical Characteristics (Low type compatible with output capacitor)
Ratings Parameter Input Voltage Output Voltage (Reference voltage VADJ SI-3012KM) Line Regulation Load Regulation Symbol min. (VADJ) Conditions VOLINE Conditions VOLOAD Conditions VDIF Dropout Voltage Conditions Conditions Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current*2 Control Voltage (Output Control Voltage (Output OFF) Control Current Terminal (Output Control Current (Output OFF) Conditions (OFF) Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions VC=2V VC=0V VC=2V VC=0V VIN=3.3V VC=2V VC=0V VIN=3.3V, VC=0V ±0.3 Tj=0 100°C (VC=2.5V) VIN=3.3V, f=100 120HZ (VO=2.5V) IO=0.5A (VO=2.5V) IO=1A (VO=2.5V) VIN=3.3V, IO=0A, VC=2V, R2=24k VIN=3.3V, VC=0V ±0.3 Tj=0 100°C VIN=3.3V, f=100 120HZ VIN=3.3V VIN=3.3V, IO=0A, VC=2V VIN=5V, VC=0V ±0.3 Tj=0 100°C VIN=5V, f=100 120HZ VIN=5V IO=1A VIN=5V, IO=0A, VC=2V 2.4*1 1.24 1.28 VIN=3.3V, IO=10mA VIN=3.3 IO=10mA (VO=2.5V) VIN=3.3V, IO=0 (VO=2.5V) IO=0.5A IO=1A VIN=3.3V, IO=0 IO=0.5A VIN=3.3 IO=10mA VIN=5V, IO=0 1.32 SI-3012KM (Variable type) typ. max. min.
SI-3025KM typ. 2.50 VIN=3.3V, IO=10mA max. 2.55 min.
SI-3033KM typ. 3.300 VIN=5V, IO=10mA VIN=5 10V, IO=10mA max.
Unit 3.366
2.45
3.234
Refer Dropout Voltage parameter. specified drop point output voltage condition that VIN=overcurrent protection starting current, mA). Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs.
SI-3000KM Series
Electrical Characteristics (High type)
Ratings Parameter Input Voltage Output Voltage (Reference voltage VADJ SI-3010KM) Line Regulation Conditions VOLOAD Load Regulation Conditions VDIF Dropout Voltage Conditions Conditions Quiescent Circuit Current Conditions Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Conditions Overcurrent Protection Starting Current*2 Control Voltage (Output Control Voltage (Output OFF) Control Current Terminal (Output Control Current (Output OFF) Input Overvoltage Shutdown Voltage Conditions Conditions Conditions VOVP Conditions IO=10mA VC=2V VC=0V IO=10mA VC=2V VC=0V IO=10mA (OFF) Conditions VO/Ta Conditions RREJ VIN=7V, VC=0V ±0.5 100°C (VO=5V) VIN=7V, f=100 120Hz (VO=5V) VIN=7V VC=2V VC=0V IO=10mA VIN=7V VC=2V VC=0V IO=0.5A (VO=5V) IO=1A (VO=5V) IN=7V, IO=0A, VC=2V R2=10k VIN=7V, VC=0V ±0.5 Tj=0 100°C VIN=7V, f=100 120Hz VIN=11V VIN=7V, IO=0A, VC=2V VIN=11V, VC=0V ±1.0 Tj=0 100°C VIN=11V, f=100 120Hz VIN=14V IO=1A VIN=11V, IO=0A, VC=2V VIN=14V, VC=0V ±1.5 Tj=0 100°C VIN=14V, f=100 120Hz VIN=7V, IO=0 (VO=5V) IO=0.5A IO=1A VIN=14V, IO=0A, VC=2V Symbol (VADJ) Conditions VOLINE VIN=6 11V, IO=10mA (VO=5V) VIN=7V, IO=0 IO=0.5A IO=1A SI-3010KM (Variable type) min. 2.4*1 0.98 1.00 1.02 VIN=7V, IO=10mA typ. max. min.
SI-3050KM typ. 5.00 max. 5.10 VIN=6 11V, IO=10mA min.
SI-3090KM typ. 9.00 max. 9.18 VIN=10 15V, IO=10mA VIN=11V, IO=0 min.
SI-3120KM typ. 12.00 max.
Unit 12.24
4.90
8.82
11.76
VIN=7V, IO=10mA
VIN=11V, IO=10mA
VIN=14V, IO=10mA
VIN=13 18V, IO=10mA VIN=14V, IO=0 IO=0.5A
Refer Dropout Voltage parameter. specified drop point output voltage condition that VIN=overcurrent protection starting current, mA). Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. SI-3010KM, SI-3050KM SI-3090KM, SI-3120KM cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage (max) (max) restricted relation (VIN Please calculate these values referring Copper Laminate Area Power Dissipation data shown hereinafter.
External Dimensions (TO252-5)
6.60 6.60±0.20 ±0.20 5.34 2.30±0.20 0.50
±0.10 ±0.20
(Unit
5.34±0.20 (5.04) (1.50)
1.10±0.20
(5°)
SEATING PLANE 0.00 0.127
2.70
0.70 0.50±0.10 1.27 1.27 2.30±0.20
0.50±0.10
(1.00)
2.70±0.20
(0.89)
Assignment SENSE (ADJ SI-3010KM/SI-3120KM) Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.33g
6.10±0.20
9.90±0.30
(4.41)
(5°)
(5°)
±0.20
1.524+0.254 -0.127
9.90±0.30
1-1-1 Linear Regulator
Block Diagram
SI-3010KM/SI-3012KM
VOUT
Sense
Typical Connection Diagram
SI-3025KM/SI-3033KM/SI-3050KM/ SI-3090KM/SI-3120KM SI-3010KM/SI-3012KM
D1*2
D1*2
sense
Load
CIN: Input capacitor larger) Output capacitor SI-3012KM/3025KM/3033KM larger) comes with circuit configuration that uses capacitor output capacitor. electrolytic capacitor used, oscillation occur temperature. SI-3010KM/3050KM/3090KM/3120KM larger) capacitor used, oscillation occur. Reverse bias protection diode This diode required protection against reverse biasing between input output. (Sanken SJPL-H2 recommended.) This diode required
Output voltage setting resistors Output voltage connecting shown above. recommended SI-3012KM).
R1=(VO-VADJ)÷(VADJ/R2)
SI-3010KM, insert case setting 1.5V. Recommended value 10k.
Reference Data
Copper Laminate Area-Thermal Resistance
Glass-epoxy board
Power Dissipation
Copper Laminate Area-Power Dissipation
Glass-epoxy board Ta=25°C 40°C 60°C 85°C
j-a(°C/W)
Copper Laminate Area (mm2) 1000
Obtaining junction temperature Measure temperature lead part with thermocouple, etc. Then, substitute this value following formula obtain junction temperature.
Tj=PD
Load
6°C/W)
Copper Laminate Area (mm2)
1000
Case temperature measurement point
1-1-1 Linear Regulator
SI-3000KD Series
Features
Surface-Mount, Current Consumption, Dropout Voltage Linear Regulator
Absolute Maximum Ratings
Parameter Input Voltage Output Current Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (Junction Ambient Air) Thermal Resistance (Junction Case) Symbol Ratings SI-3012KD/3033KD +125 +125 33.3 SI-3010KD/3050KD 35*1 (Ta=25°C) Unit
Compact surface-mount package (TO263-5) Output current: 1.0A dropout voltage: VDIF 0.6V 1.0A) circuit current consumption: (600 SI-3010KD, SI-3050KD circuit current output OFF: (OFF) Built-in overcurrent, thermal protection circuits Compatible with capacitors (SI-3012KD SI-3033KD)
PD*2 Tstg
°C/W °C/W
built-in input-overvoltage-protection circuit shuts down output voltage Input Overvoltage Shutdown Voltage electrical characteristics. When mounted glass-epoxy board 1600mm2 (copper laminate area 100%).
Applications
Secondary stabilized power supply (local power supply)
Electrical Characteristics (Low type compatible with output capacitor)
Ratings
(Ta=25°C, VC=2V unless otherwise specified) SI-3033KD Unit max.
Parameter
Input Voltage Output Voltage (Reference Voltage SI-3012KD) Line Regulation Load Regulation
Symbol min. (VADJ) Conditions VOLINE Conditions VOLOAD Conditions VDIF Conditions Conditions 2.4*3 1.24
SI-3012KD (Variable type) typ. 1.28 VIN=3.3V, IO=10mA VIN=3.3 IO=10mA (VO=2.5V) VIN=3.3V, IO=0 (VO=2.5V) IO=0.5A (VO=2.5V) IO=1A (VO=2.5V) VIN=3.3V, IO=0A, VC=2V, R2=2.4k VIN=3.3V, VC=0V ±0.3 Tj=0 100°C (VO=2.5V) VIN=3.3V, f=100 120HZ, IO=0.1A (VO=2.5V) VIN=3.3V VC=2V VC=0V max.
min.
typ. 3.300 VIN=5V, IO=10mA
1.32
3.234
3.366
VIN=5 10V, IO=10mA VIN=5V, IO=0 IO=0.5A IO=1A VIN=5V, IO=0A,VC=2V VIN=5V, VC=0V ±0.3 Tj=0 100°C VIN=5V, f=100 120HZ, IO=0.1A VIN=5V VC=2V VC=0V
Dropout Voltage
Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current*1 Control Voltage (Output Terminal ON)*2 Control Voltage (Output OFF) Control Current (Output Control Current (Output OFF)
Conditions (OFF) Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions
mV/°C
specified drop point output voltage under condition Output Voltage parameter. Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. Refer Dropout Voltage parameter. (max) (max) restricted relation (VIN Please calculate these values referring Copper laminate area Power dissipation data.
SI-3000KD Series
Electrical Characteristics (High Type)
Ratings
Parameter
Input Voltage Output Voltage (Reference Voltage VADJ SI-3010KD) Line Regulation
Symbol min. (VADJ) Conditions VOLINE Conditions VOLOAD 2.4*1 0.98
SI-3010KD (Variable type) typ. 1.00 VIN=7V, IO=10mA VIN=6 11V, IO=10mA (VO=5V) VIN=7V, IO=0 (VO=5V) IO=0.5A (VO=5V) IO=1A (VO=5V) VIN=7V, IO=0A, VC=2V R2=10k VIN=7V, VC=0V ±0.5 Tj=0 100°C (VO=5V) VIN=7V, f=100 120Hz, IO=0.1A (VO=5V) VIN=7V VC=2V IO=10mA VC=0V max. 27*5 1.02 min.
SI-3050KD typ. 5.00 VIN=7V, IO=10mA VIN=6 11V, IO=10mA VIN=7V, IO=0 IO=0.5A IO=1A VIN=7V, IO=0A, VC=2V VIN=7V, VC=0V ±0.5 Tj=0 100°C VIN=7V, f=100 120Hz, IO=0.1A VIN=7V VC=2V VC=0V IO=10mA max. 15*5 5.10
Unit
4.90
Load Regulation
Conditions VDIF
Dropout Voltage
Conditions Conditions
Quiescent Circuit Current
Conditions (OFF) Conditions VO/Ta Conditions RREJ
Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current*2
Conditions Conditions ON)*3 Conditions Conditions VOVP Conditions
Control Voltage (Output Terminal
Control Voltage (Output OFF)*3 Control Current (Output Control Current (Output OFF) Input Overvoltage Shutdown Voltage
Refer Dropout Voltage parameter. specified drop point output voltage under condition Output Voltage parameter. Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. SI-3010KD, SI-3050KD, cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage (max) (max) restricted relation (VIN Please calculate these values referring Copper laminate area Power dissipation data shown hereinafter.
External Dimensions (TO263-5)
Case temperature measurement point
(0.40)
±0.2
(unit
10.0
±0.2
(8.0) 3-R0.3
±0.2
(15°)
(4.4) -0.05
+0.10
(1.75)
(6.8)
±0.2
9.2±
±0.3
15.3
(3°)
±0.1
0.10 (3°)
±0.15
(R0.3)
±0.3
±0.2
±0.2
15.30
±0.3
(0.75)
0.88
±0.10
(R0.3)
2.54
0~6°
±0.1
(0.5) (1.7
±0.25
±0.2
±0.2
±0.2
(3°)
Assignment (Common rear side product) Sense (ADJ SI-3010KD/3012KD) Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 1.48g
±0.2
±0.25 (1.7 (3°)
±0.1
(4.6)
(1.7
±0.25
±0.25 (1.7
(3°) 2-R0.3 10.0
±0.02
1-1-1 Linear Regulator
Block Diagram
SI-3010KD/SI-3012KD
SI-3033KD/SI-3050KD
Sense
Typical Connection Diagram
SI-3033KD/SI-3050KD SI-3010KD/SI-3012KD
D1*2
D1*2
sense
Load
Load
CIN: Input capacitor larger) Output capacitor SI-3012KD/3033KD larger) capacitor such ceramic capacitor. When using electrolytic capacitor, oscillation occur temperature. SI-3010KD/3050KD/ larger) capacitor used, oscillation occur. Reverse bias protection diode This diode required protection against reverse biasing between input output. (Sanken SJPL-H2 recommended.) This diode required 3.3V.
Output voltage setting resistors output voltage connecting shown above. recommended value (24k SI-3012KD).
R1=(VO-VADJ)÷(VADJ/R2)
SI-3010KD, insert case setting 1.5V. recommended value 10k.
Reference Data
Copper Laminate Area Glass-Epoxy Board) Thermal Resistance (from Junction Ambient Temperature) (Typical Value)
Junction Ambient Temperature Thermal Resistance (°C/W)
When Using Glass-Epoxy Board
higher heat radiation effect achieved enlarging copper laminate area connected inner frame which monolithic mounted. Obtaining junction temperature Measure case temperature with thermocouple, etc. Then, substitute this value following formula obtain junction temperature.
Tj=PD 3°C/W)
1000 1200 1400 1600 1800
Copper Laminate Area (mm2)
1-1-1 Linear Regulator
SI-3000LLSL Series Surface-Mount, Current Consumption, Dropout Voltage Linear Regulator
Features
input voltage (1.3V) output voltage (1.0V) Compact surface-mount package (SOP8) dropout voltage: VDIF 0.3V 1.5A) Built-in overcurrent, input-overvoltage thermal protection circuits Built-in ON/OFF function (OFF state circuit current: max.) Compatible with capacitors
Absolute Maximum Ratings
Parameter Input Voltage Bias Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (Junction Lead (Pin Thermal Resistance (Junction Ambient Air) Symbol PD*1 Tstg Ratings +125 +100 +125 Unit
(Ta=25°C)
°C/W °C/W
(j-L) (j-a)*1
When mounted glass-epoxy board 40mm (copper laminate area 100%).
Applications
On-board local power supply stabilization secondary-side output voltage switching power supplies
Recommended Operating Conditions
Ratings Parameter Input Voltage Bias Voltage Output Current Operating Ambient Temperature Symbol
SI-3010LLSL 3.6*1 1.5*1 +85*1
Unit
(max) (max) restricted relation (VIN
Electrical Characteristics
Parameter Symbol min. Reference Voltage Line Regulation Load Regulation Dropout Voltage Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Overcurrent Protection Starting Current*1 Control Voltage (Output Terminal ON)*2 Control Voltage (Output OFF) Control Current (Output Control Current (Output OFF) VADJ Conditions VOLINE Conditions VOLOAD Conditions VDIF Conditions Conditions (OFF) Conditions VO/Ta Conditions Conditions Conditions Conditions 0.980 typ. 1.000
(Ta=25°C, VC=2V, VIN=1.8V, VB=3.3V, O=1.5V unless otherwise specified) Ratings SI-3010LLSL max. 1.020 VIN=1.7 2.5V, IO=10mA VIN=1.8V, IO=0 1.5A IO=1.0A IO=0A, R2=10k VC=0V ±0.2 Tj=0 100°C VIN=1.8V, VB=3.3V VC=2.7V VC=0.4V Unit
IO=10mA
specified drop point output voltage condition that overcurrent protection starting current, Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs.
SI-3000LLSL Series
External Dimensions (SOP8)
5.1±0.4 1.27 0.4±0.1 0.15+0.1 -0.05
0.5±0.1
(unit
Assignment Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.1g
0.995max.
1.55±0.15 1.5±0.1
0.10 0.4±0.1 0.12
Typical Connection Diagram/Block Diagram
CIN, Input bias capacitors (Approx. 10µF) Required when input line contains inductance when wiring long. Output capacitor (47µF larger) SI-3010LLSL designed capacitor (such ceramic capacitor) output capacitor. recommended value output capacitor 500m less room temperature). Output voltage setting resistors output voltage connecting shown left. recommended value 10k.
0.05±0.05
1.27
4.4±0.2
6.2±0.3
VOUT OCP(2)
Drive AMP1
ON/OFF
Open:OFF Low: High:
(VO-VADJ) (VADJ/R2) CSS:Soft start capacitor rising time output voltage connecting between VOUT ADJ.
Reference Data
Copper Laminate Area Power Dissipation
Ta=25°C
Ta=50°C
Ta=80°C Copper Laminate Area
1000
1-1-1 Linear Regulator
SI-3000ZD Series Surface-Mount, Dropout Voltage Linear Regulator
Features
Compact surface-mount package (TO263-5) Output current: 3.0A dropout voltage: VDIF 0.6V 3.0A) circuit current output OFF: (OFF) Built-in overcurrent thermal protection circuits
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (Junction Ambient Air) Thermal Resistance (Junction Case) Symbol VIN*1 IO*1 PD*3 Tstg Ratings +125 +125 33.3 Unit °C/W °C/W
(Ta=25°C)
Applications
Secondary stabilized power supply (local power supply)
Recommended Operating Conditions
Parameter Input Voltage Output Current Operating Ambient Temperature Operating Junction Temperature Output Voltage Variable Range Symbol VOADJ Ratings
Unit
Remarks
+100
Only SI-3011ZD. Refer block diagram.
(max) (max) restricted relation (VIN input voltage 2.4V higher when setting output voltage 2.0V lower (SI-3011ZD). When mounted glass-epoxy board 40mm (copper laminate area 100%).
Electrical Characteristics
Ratings Parameter Output Voltage (Reference Voltage VADJ SI-3011ZD) Line Regulation Load Regulation Dropout Voltage Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current*2
(Ta=25°C, VC=2V unless otherwise specified) SI-3011ZD (Variable type) min. typ. 1.100 VIN=VO+1V, IO=10mA VIN=3.3 IO=10mA (VO=2.5V) VIN=3.3V, IO=0 (VO=2.5V) IO=3A (VO=2.5V) VIN=VO+1V, IO=0A, VC=2V VIN=VO+1V, VC=0V ±0.3 Tj=0 100°C VIN=VO+1V, f=100 120HZ, IO=0.1A VIN=VO+1V VC=2.7V VC=0V VC=2.7V VC=0V VIN=5V VIN=5V, VC=0V ±0.3 Tj=0 100°C VIN=5V, f=100 120HZ, IO=0.1A IO=3A VIN=5V, IO=0A, VC=2V VIN=5V, IO=0 VIN=4.5 5.5V, IO=10mA max. 1.122 min. 3.234 1.078 SI-3033ZD typ. 3.300 VIN=5V, IO=10mA max. 3.366 Unit
Symbol (VADJ) Conditions VOLINE Conditions VOLOAD Conditions VDIF Conditions Conditions (OFF) Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions
Control Voltage (Output ON)*3 Control Voltage (Output OFF)*3 Control Current(Output Terminal Control Current(Output OFF)
input voltage 2.4V higher when setting output voltage 2.0V lower. specified drop point output voltage under condition Output Voltage parameter. Output when output control terminal terminal) open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. These products cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
SI-3000ZD Series
External Dimensions (TO263-5)
Case temperature measurement point
(0.40)
±0.2
(Unit
±0.2
10.0
(8.0) 3-R0.3
±0.2
(15°)
(4.4) +0.10 -0.05
(1.75)
(4.6)
(6.8)
±0.2
9.2±
±0.2
±0.2
(3°)
(3°)
±0.1
0.10 (3°)
±0.15
(R0.3)
±0.3
±0.2
0.88
±0.10
(R0.3)
0~6°
±0.1
(0.5) (1.7
±0.25
±0.2
±0.25 (1.7 (3°)
±0.1
(1.7
±0.25
±0.25 (1.7
Assignment (Common rear side product) Sense (ADJ SI-3011ZD) Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 1.48g
±0.3
15.3
±0.2
15.30
±0.3
(0.75)
(3°) 2-R0.3 10.0
±0.02
Block Diagram
SI-3011ZD
2.54
±0.2
Drive AMP1
CIN: Input capacitor (Approx. 10µF) Output capacitor (47µF larger) output voltage oscillate type capacitor (such ceramic capacitor) used output capacitor SI-3000ZD Series.
SI-3033ZD
AMP1
Reference Data
Copper Laminate Area Glass-Epoxy Board) Thermal Resistance (from Junction Ambient Temperature) (Typical Value)
Junction Ambient Temperature Thermal Resistance (°C/W)
When Using Glass-Epoxy Board
1000
1200
1400
1600
1800
Copper Laminate Area (mm2)
Drive
SENSE
Output voltage setting resistors output voltage connecting shown left. recommended value 11k.
(VO-VADJ) (VADJ/R2) Insert case setting 1.8V. recommended value 10k.
higher heat radiation effect achieved enlarging copper laminate area connected inner frame which monolithic mounted. Obtaining junction temperature Measure terminal temperature with thermocouple, etc. Then substitute this value following formula obtain junction temperature.
j-C+TC
1-1-1 Linear Regulator
SI-3000B Series 5-Terminal, Full-Mold, Dropout Voltage Linear Regulator
Features
Compact full-mold package (equivalent TO220) Output current: 0.27A dropout voltage: VDIF 0.5V IO=0.27A) Output ON/OFF control terminal compatible with LS-TTL. driven directly LS-TTL standard CMOS logic.) Built-in foldback overcurrent thermal protection circuits Accuracy overcurrent protection starting current SI-3157B 0.7A (VIN=18V) SI-3025B 0.7A (When VIN=18V, VO=15.7V) 0.75A (When VIN=18V, VO=11.7V) Variable output voltage type (SI-3025B) also available
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (junction case) Thermal Resistance (junction ambient air) Symbo Tstg Ratings 0.27*1 14(With infinite heatsink) 1.5(Without heatsink, stand-alone operation) +125 +100 +125 66.7(Without heatsink, stand-alone operation) Unit °C/W °C/W
(Ta=25°C)
Applications
antenna power supplies Electronic equipment
Electrical Characteristics
Ratings Parameter Input Voltage Output Voltage (Reference Voltage VADJ SI-3025B) Dropout Voltage Line Regulation Load Regulation Temperature Coefficient Output Voltage (SI-3025B: Temperature Coefficient Reference Voltage) Ripple Rejection Quiescent Circuit Current Symbol min. (VADJ) Conditions VDIF Conditions VOLINE Conditions VOLOAD Conditions VO/Ta (VADJ/Ta) Conditions RREJ Conditions Conditions Overcurrent Protection Starting Current*3,4 Control Voltage (Output Control Voltage (Output OFF) Terminal*5 Control Current (Output Control Current (Output OFF) Conditions Conditions Conditions Conditions VC=0.4V VC=2.7V -0.3 VC=0.4V VC=2.7V VIN=18V IO0.27A VIN=17 27V, IO=0.2A VIN=18V, IO=0 0.27A ±1.5 VIN=18V, IO=5mA, Tj=0 100°C VIN=18V, f=100 120HZ VIN=18V, IO=0A
(Ta=25°C unless otherwise specified)
SI-3157B typ.
max. 27*1
min. 6*2,6 2.448
SI-3025B typ.
Unit max. 27*1
14.92
15.70 VIN=18V, IO=0.2A
16.48
2.550 VIN=VO+3V, IO=0.2A
2.652
IO0.27A
VIN=(VO+1) 27V, IO=0.27A VIN=VO+3V, IO=0 0.27A ±0.5 VIN=VO+3V, IO=5mA, Tj=0 100°C VIN=VO+3V, f=100 120HZ VIN=VO+3V, IO=0A 0.75 VIN=18V, VO=11.7V VIN=18V, VO=15.7V -0.3
(SI-3025B:mV/V)
(SI-3025B:mV/V)
mV/°C
VIN(max) IO(max) restricted relation Refer Dropout Voltage parameter. (Refer Setting Input Voltage page specified drop point output voltage condition that VIN=VO+3V, IO=0.2A. These products cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage Output even when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. When setting output voltage lower, input voltage needs higher operate stably.
SI-3000B Series
External Dimensions (TO220F-5)
3.2±0.2
(Unit
10.0±0.2
2.8±0.2
4.0±0.2 7.9±0.2
±0.2
Part Number Number Assignment SI-3157B Sense
16.9±0.3
2.6±0.1
(2.0)
0.95±0.15 0.85 -0.1
(4.6)
+0.2
0.45 -0.1
+0.2
(8.0)
5.0±0.6
(17.9)
SI-3025B
3.9±0.7
(4.3) 8.2±0.7
Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 2.3g
Forming 1101
Block Diagram
SI-3157B
SI-3025B
Reg.
Reg.
Amp.
ON/OFF
ON/OFF
Protection
Protection
VREF
Amp.
Drive
Drive
Equivalent LS-TTL
Equivalent LS-TTL
Typical Connection Diagram
SI-3157B
Input
OPEN
SI-3157B Output
SI-3025B
Input OPEN SI-3025B Output
Output capacitor 100µF) Oscillation prevention capacitor (Approx. 47µF, 0.33µF) These capacitors required input line contains inductance wiring long. Especially temperatures, tantalum capacitors recommended Protection diode This diode required protection against reverse biasing input output. Sanken EU2Z recommended. External resistor setting output voltage relation between output voltage external resistors follows. (VADJ=2.55V(typ.)) VO=VADJ must 2.55k stable operation.
Ta-PD Characteristics
Infinite heatsink
With Silicone Grease Heatsink: Aluminum
Power Dissipation
Without heatsink
Ambient Temperature (°C)
VREF
1-1-1 Linear Regulator
SI-3000KFE Series Current Consumption, Dropout Voltage Linear Regulator
Features
Compact full-mold package (equivalent TO220) Output current: 1.0A dropout voltage: VDIF 0.5V 1.0A) High ripple rejection: 75dB circuit current output OFF: (OFF) Built-in overcurrent thermal protection circuits
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Storage Temperature Operating Ambient Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air) Symbol Tstg Ratings SI-3010KFE 35*1 16.6 1.72 +125 +125 +100 °C/W °C/W Unit Remarks
(Ta=25°C)
With infinite heatsink Without heatsink, stand-alone operation
Without heatsink, stand-alone operation
Applications
Secondary stabilized power supply (local power supply)
built-in input-overvoltage-protection circuit shuts down output voltage Input Overvoltage Shutdown Voltage electrical characteristics.
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range Output Voltage Variable Range Operating Ambient Temperature Operating Junction Temperature Symbol VOADJ SI-3010KFE 2.4*2 27*1 1.0*1 +100 Unit
(max) (max) restricted relationship (max) (VIN 16.6W. Refer Dropout Voltage parameter.
Electrical Characteristics
Ratings Parameter Symbol min. VADJ Reference Voltage Conditions VOLINE Line Regulation Conditions VOLOAD Load Regulation Conditions VDIF Dropout Voltage Conditions Conditions Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Conditions (OFF) Conditions VO/Ta Conditions RREJ Ripple Rejection Overcurrent Protection Starting Current*3 Control Voltage (Output ON)*4 Control Voltage (Output OFF) Control Current (Output Control Current (Output OFF) Input Overvoltage Shutdown Voltage Conditions Conditions Conditions Conditions Conditions Conditions VOVP Conditions IO=0.01A VIN=7V, VC=2V VIN=7V, VC=0V VIN=7V VIN=7V VIN=7V, VC=2V VIN=7V, VC=0V ±0.5 VIN=7V, IO=0.01A, VC=2V, Tj=0 100°C, VO=2.5V VIN=7V, IO=0.1A, VC=2V, f=100 120Hz, VO=5V VIN=7V, IO=0A, VC=2V IO=0.5A, VC=2V, VO=5V IO=1.0A, VC=2V, VO=5V VIN=7V, IO=0 VC=2V, VO=5A VIN=6 15V, IO=0.01A, VC=2V, VO=5A 0.98 SI-3010KFE typ. 1.00 VIN=7V, IO=0.01A, VC=2V, VO=5A max. 1.02 Unit
Terminal
specified drop point output voltage condition that overcurrent protection starting current, Output when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. SI-3000KFE cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
SI-3000KFE Series
Block Diagram
SI-3010KFE
Ta-PD Characteristics
With Infinite Heatsink Silicone Grease: G746 (Shin-Etsu Chemical) Heatsink: Aluminum
Power Dissipation
VOUT
(2.3°C/W) (5.2°C/W) (7.6°C/W)
Without Heatsink Ambient Temperature (°C)
Typical Connection Diagram
SI-3010KFE
D1*1
Load
CIN: Input capacitor (22µF larger) Output capacitor (47µF larger) capacitor (such ceramic capacitor) used output capacitor, oscillation occur. Reverse bias protection diode This diode required protection against reverse biasing between input output. (Sanken RU2Z recommended.)
Output voltage setting resistors output voltage adjusted connecting shown above. recommended value 10k.
R1=(VO-VADJ)÷(VADJ/R2)
SI-3010KFE, insert case setting 1.5V. recommended value 10k.
External Dimensions (TO220F-5)
Type
10.16
±0.2
(Unit Type
±0.1
±0.2
3.2±0.2
2.54
±0.2
10.0
±0.2
±0.2
4.0±0.2 7.9±0.2
±0.2
±0.2
6.68
Part Number Number Administer Number Assignment Vout Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx. external dimension shall either
±0.2
(17.9)
2.76
±0.2
2.6±0.1
(2.0)
±0.6
0.95
+0.1 R-end
±0.15 +0.2
p1.7
±0.2
±0.6
-0.1
+0.2
±0.7
±0.7
0.85 -0.1 P1.7
±0.7
±0.7
0.45 -0.1
+0.2
3.9±0.7
(4.3) 8.2±0.7
4.6±0.6
-0.05
(4.6)
5.0±0.6
(17.9)
16.9±0.3
15.87
1-1-1 Linear Regulator
SI-3000C Series 5-Terminal, Full-Mold, Dropout Voltage Linear Regulator
Features
Compact full-mold package (equivalent TO220) Output current: 1.5A dropout voltage: VDIF IO=1.5A) Variable output voltage (rise only) Available remote sensing Output ON/OFF control terminal compatible with LS-TTL. driven directly LS-TTL standard CMOS logic.) Built-in foldback overcurrent (SI-3033C: Drooping type overcurrent), input-overvoltage thermal protection circuits
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (junction case) Thermal Resistance (junction ambient air) Symbol Tstg Ratings SI-3033C SI-3050C/3090C SI-3120C/3150C 1.5*2 18(With infinite heatsink) 1.5(Without heatsink, stand-alone operation) +125 +100 +125 66.7(Without heatsink, stand-alone operation) SI-3240C
(Ta=25°C) Unit °C/W °C/W
Applications
stabilization secondary-side output voltage switching power supplies Electronic equipment
Electrical Characteristics
Ratings Parameter Input Voltage Output Voltage Symbol min.
(Ta=25°C unless otherwise specified)
SI-3033C typ. 3.300 3.300 VIN=5V, IO=1.0A max. 15*2 3.432 3.366 min. 4.80 4.90
SI-3050C typ. 5.00 5.00 VIN=8V, IO=1.0A IO1.0A IO1.5A VIN=6 15V, IO=1.0A VIN=8V, IO=0 1.5A ±0.5 VIN=8V, IO=5mA, Tj=0 100°C VIN=8V, f=100 120HZ VIN=8V, IO=0A VIN=8V VC=2.7V -0.3 VC=0.4V -0.3 max. 30*2 5.20 5.10 min. 10*3 8.64 8.82
SI-3090C typ. 9.00 9.00 VIN=12V, IO=1.0A VIN=10 20V, IO=1.0A VIN=12V, IO=0 1.5A ±1.0 VIN=12V, IO=5mA, Tj=0 100°C VIN=12V, f=100 120HZ VIN=12V, IO=0A VIN=12V -0.3 max. 30*2 9.36 9.18
Unit
SI-3000C SI-3000CA
3.168 Conditions VDIF Conditions Conditions 3.234
Dropout Voltage
Line Regulation Load Regulation Temperature Coefficient Output Voltage Ripple Rejection Quiescent Circuit Current Overcurrent Protection Starting Current*4,6 Control Voltage (Output Control Voltage (Output OFF) Control Current Terminal (Output Control Current (Output OFF)
VOLINE Conditions VOLOAD Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions Conditions
VIN=4.5 12V, IO=1.0A VIN=5V, IO=0 1.5A ±0.5
mV/°C
VIN=5V, IO=5mA, Tj=0 100°C VIN=5V, f=100 120HZ VIN=5V, IO=0A VIN=5V
some cases, printed right marking. VIN(max) IO(max) restricted relation Refer Dropout Voltage parameter. (Refer Setting Input Voltage page specified drop point output voltage condition that VIN=VO+3V, IO=1A. Output even when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. These products (except SI-3033C) cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
SI-3000C Series
Electrical Characteristics
Ratings Parameter Input Voltage Output Voltage Symbol min. 13*3 11.52 Conditions VDIF Dropout Voltage Conditions Conditions Line Regulation Load Regulation Temperature Coefficient Output Voltage Ripple Rejection Quiescent Circuit Current Overcurrent Protection Starting Current*4,6 Control Voltage (Output Control Voltage (Output OFF) Control Current Terminal*5 (Output Control Current (Output OFF) VOLINE Conditions VOLOAD Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions Conditions -0.3 VC=0.4V VC=2.7V -0.3 VIN=15V VIN=13 25V, IO=1.0A VIN=15V, IO=0 1.5A ±1.5 VIN=15V, IO=5mA, Tj=0 100°C VIN=15V, f=100 120HZ VIN=15V, IO=0A VIN=18V IO1.5A VIN=16 25V, IO=1.0A VIN=18V, IO=0 1.5A ±1.5 VIN=18V, IO=5mA, Tj=0 100°C VIN=18V, f=100 120HZ VIN=18V, IO=0A 11.76 12.00 12.00 VIN=15V, IO=1.0A IO1.0A SI-3120C typ. max. 30*2 12.48 12.24 min. 16*3 14.40 14.70 15.00 15.00 VIN=18V, IO=1.0A SI-3150C typ. max. 30*2 15.60 15.30 min. 25*3 23.04 23.52
(Ta=25°C unless otherwise specified) SI-3240C typ. 24.00 24.00 VIN=27V, IO=1.0A mV/°C max. 40*2 24.96 24.48 Unit
SI-3000C SI-3000CA
VIN=25 38V, IO=1.0A VIN=27V, IO=0 1.5A ±2.5 VIN=27V, IO=5mA, Tj=0 100°C VIN=27V, f=100 120HZ VIN=27V, IO=0A VIN=27V -0.3
some cases, printed right marking. VIN(max) IO(max) restricted relation Refer Dropout Voltage parameter. (Refer Setting Input Voltage page specified drop point output voltage condition that VIN=VO+3V, IO=1A. Output even when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. These products cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
1-1-1 Linear Regulator
External Dimensions (TO220F-5)
3.2±0.2
10.0±0.2
(unit
4.2±0.2 2.8±0.2 4.0±0.2 7.9±0.2 16.9±0.3
2.6±0.1
(17.9)
Part Number Number Assignment Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 2.3g
(2.0)
0.95±0.15 0.85 -0.1 (4.6)
+0.2
0.45 -0.1
+0.2
3.9±0.7
(4.3) 8.2±0.7
Forming 1101
Block Diagram
SI-3000C
(8.0)
5.0±0.6
Reg.
ON/OFF
Protection
Amp.
Drive
Equivalent LS-TTL
VREF
SI-3000C Series
Typical Connection Diagram
Input
OPEN
SI-3000C Output
Output capacitor 100µF) Oscillation prevention capacitors (Approx. 47µF, 0.33µF) These capacitors required input line contains inductance wiring long. Especially temperatures, tantalum capacitors recommended Protection diode This diode required protection against reverse biasing input output. Sanken EU2Z recommended.
Ta-PD Characteristics
Infinite heatsink
With Silicone Grease Heatsink: Aluminum
Power Dissipation
(2.3°C/W)
(5.2°C/W) (7.6°C/W)
Without heatsink
Ambient Temperature (°C)
1-1-1 Linear Regulator
SI-3000J Series
Features
5-Terminal, Full-Mold, Dropout Voltage Linear Regulator
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (junction case) Thermal Resistance (junction ambient air) Symbol Tstg Ratings SI-3050J SI-3090J 2.0*1 20(With infinite heatsink) 1.5(Without heatsink, stand-alone operation) +125 +100 +125 66.7(Without heatsink, stand-alone operation) SI-3120J/3150J (Ta=25°C) Unit °C/W °C/W
Compact full-mold package (equivalent TO220) Output current: 2.0A dropout voltage: VDIF IO=2.0A) Variable output voltage (rise only) Available remote sensing used remote sensing. Output ON/OFF control terminal compatible with LS-TTL. driven directly LS-TTL standard CMOS logic.) Built-in foldback-overcurrent, input-overvoltage thermal protection circuits
Applications
stabilization secondary-side output voltage switching power supplies Electronic equipment
Electrical Characteristics
Ratings Parameter Input Voltage Output Voltage Symbol min. Conditions VDIF Conditions Dropout Voltage Conditions Line Regulation Load Regulation Temperature Coefficient Output Voltage Ripple Rejection VOLINE Conditions VOLOAD Conditions VO/Ta Conditions RREJ Conditions Quiescent Circuit Current Overcurrent Protection Starting Current*3,5 Control Voltage (Output Control Voltage (Output OFF) Control Current Terminal (Output Control Current (Output OFF) Conditions Iq(off) Conditions Conditions Conditions Conditions -0.3 VIN=8V VC=2.7V -0.3 VC=0.4V -0.3 VIN=6 15V, IO=1.0A VIN=8V, IO=0 2.0A ±0.5 VIN=8V, IO=5mA, Tj=0 100°C VIN=8V, f=100 120HZ VIN=8V, IO=0A VIN=12V VIN=8V, IO=0A, VC=0.4V VIN=10 20V, IO=1.0A VIN=12V, IO=0 2.0A ±1.0 VIN=12V, IO=5mA, Tj=0 100°C VIN=12V, f=100 120HZ VIN=12V, IO=0A VIN=15V VIN=12V, IO=0A, VC=0.4V IO2.0A VIN=13 25V, IO=1.0A VIN=15V, IO=0 2.0A ±1.5 VIN=15V, IO=5mA, Tj=0 100°C VIN=15V, f=100 120HZ VIN=15V, IO=0A VIN=15V, IO=0A, VC=0.4V 4.90 5.00 VIN=8V, IO=1.0A SI-3050J typ. max. 15*1 5.10 min. 10*2 8.82 9.00 VIN=12V, IO=1.0A IO1.5A SI-3090J typ. max. 25*1 9.18 min. 13*2 11.76 12.00 VIN=15V, IO=1.0A SI-3120J typ. max. 27*1 12.24 min. 16*2 14.70
(Ta=25°C unless otherwise specified) SI-3150J typ. 15.00 VIN=18V, IO=1.0A VIN=16 25V, IO=1.0A VIN=18V, IO=0 2.0A ±1.5 VIN=18V, IO=5mA, Tj=0 100°C VIN=18V, f=100 120HZ VIN=18V, IO=0A VIN=18V, IO=0A, VC=0.4V VIN=18V -0.3 mV/°C max. 27*1 15.30 Unit
VIN(max) IO(max) restricted relation Refer Dropout Voltage parameter. (Refer Setting Input Voltage page specified drop point output voltage condition that VIN=VO+3V, IO=1A. Output even when output control terminal open. Each input level equivalent LS-TTL level. Therefore, driven directly LS-TTLs. These products cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
SI-3000J Series
External Dimensions (TO220F-5)
3.2±0.2
(unit
10.0±0.2
2.8±0.2
4.0±0.2 7.9±0.2
±0.2
Part Number Number
16.9±0.3
2.6±0.1
(2.0)
0.95
±0.15 +0.2
0.85 -0.1
(4.6)
0.45 -0.1
+0.2
(8.0)
5.0±0.6
(17.9)
Assignment Sense Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 2.3g
3.9±0.7
(4.3) 8.2±0.7
Forming 1101
Block Diagram
SI-3000J
ON/OFF
Protection
Amp.
Drive
Reg.
Equivalent LS-TTL
Typical Connection Diagram
VREF
Input
OPEN
SI-3000J Output
Output capacitor 100µF) Oscillation prevention capacitor (Approx. 47µF, 0.33µF) These capacitors required input line contains inductance wiring long. Especially temperatures, tantalum capacitors recommended Protection diode This diode required protection against reverse biasing input output. Sanken EU2Z recommended.
Ta-PD Characteristics
With Silicone Grease Heatsink: Aluminum
Power Dissipation
Infinite heatsink
(2.3°C/W) (5.2°C/W) (7.6°C/W)
Without heatsink
Ambient Temperature (°C)
1-1-1 Linear Regulator
SI-3000ZFE Series 5-Terminal, Dropout Voltage Linear Regulator
Features
Compact full-mold package (equivalent TO220) Output current: 3.0A dropout voltage: VDIF 0.7V 3.0A) circuit current output OFF: (OFF) Built-in overcurrent thermal protection circuits
Absolute Maximum Ratings
Parameter Input Voltage Output Control Terminal Voltage Output Current Power Dissipation Junction Temperature Operating Ambient Temperature Storage Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air) Symbol VIN*1 IO*1 Tstg Ratings (With infinite heatsink) (Without heatsink, stand-alone operation) +125 +100 +125 66.7 (Without heatsink, stand-alone operation)
25°C) Unit
Applications
Secondary stabilized power supply (local power supply)
°C/W °C/W
Recommended Operating Conditions
Parameter Input Voltage Output Current Operating Ambient Temperature Operating Junction Temperature Output Voltage Variable Range Symbol VOADJ Ratings
Unit
+100
(max) (max) restricted relationship (VIN input voltage 2.4V higher when setting output voltage 2.0V lower.
Electrical Characteristics
Parameter Symbol min. Reference Voltage Line Regulation Load Regulation Dropout Voltage Quiescent Circuit Current Circuit Current Output Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current*2
25°C, unless otherwise specified)
SI-3011ZFE typ. 1.100 VIN=VO+1V, IO=10mA VIN=3.3 IO=10mA (VO=2.5V) VIN=3.3V, IO=0 (VO=2.5V) IO=3A (VO=2.5V) VIN=VO+1V, IO=0A, VC=2V VIN=VO+1V, VC=0V ±0.3 Tj=0 100°C VIN=VO+1V, f=100 120HZ, IO=0.1A VIN=VO+1V VC=2.7V VC=0V max. 1.122 1.078 Unit
VADJ Conditions VOLINE Conditions VOLOAD Conditions VDIF Conditions Conditions (OFF) Conditions VO/Ta Conditions RREJ Conditions Conditions Conditions Conditions
Control Voltage (Output ON)*3 Control Voltage (Output OFF)*3 Control Current(Output Terminal Control Current(Output OFF)
input voltage 2.4V higher when setting output voltage 2.0V lower. specified drop point output voltage under Output Voltage parameter conditions. Output when output control terminal open. Each input level equivalent LS-TTL level. Therefore, device driven directly LS-TTLs. These products cannot used following applications because built-in foldback-type overcurrent protection cause errors during start-up stage. Constant current load Positive negative power supply Series-connected power supply adjustment raising ground voltage
SI-3000ZFE Series
External Dimensions (TO220F-5)
Type
±0.1
(unit Type
10.16
±0.2
±0.2
2.54
±0.2
±0.2
3.2±0.2
10.0
±0.2
±0.2
4.0±0.2 7.9±0.2
±0.2
Part Number number Administer number Assignment Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 2.3g external dimension shall either
±0.2
6.68
(17.9)
2.76
±0.2
2.6±0.1
(2.0)
±0.6
0.95
+0.1 R-end
±0.15 +0.2
p1.7
±0.2
±0.6
-0.1
+0.2
±0.7
±0.7
0.85 -0.1
0.45 -0.1
+0.2
3.9±0.7
(4.3) 8.2±0.7
Typical Connection Diagram/Block Diagram
SI-3011ZFE
Drive AMP1
CIN: Input capacitor (Approx. 10µF) This capacitor required when input line contains inductance when wiring long. Output capacitor (47µF higher) output voltage oscillate type capacitor (such ceramic capacitor) used output capacitor SI-3000ZFE. Output voltage setting resistors output voltage connecting shown left. recommended value 11k.
(VO-VADJ) (VADJ/R2)
Insert case setting 1.8V. recommended value 10k.
Ta-PD Characteristics
With Silicone Grease Heatsink: Aluminum
Power Dissipation
With Infinite Heatsink
(2.3°C/W) (5.2°C/W) (7.6°C/W)
Without heatsink
Ambient Temperature (°C)
4.6±0.6
-0.05
(4.6)
5.0±0.6
(17.9)
16.9±0.3
15.87
1-1-2 Switching Mode Regulator
Application Note
Heat Dissipation Reliability
reliability highly dependent operating temperature. Please sure apply silicone grease mount heatsink with proper mounting torque. Heatsink design should particular attention ensuring sufficient heat dissipation capacity. addition, please take into account convection operation. reliability discrete components such capacitors coils closely related temperature. high operating temperature reduce service life. Exceeding allowable temperature burn coils damage capacitors. important make sure that temperature output smoothing coils input/output capacitors exceed their allowable levels during operation. With adequate derating coils, minimize heat emission possible. (For discrete components, refer individual user manuals.)
Mounting Torque
SI-8000E SI-8000JF SI-8000S SI-8000TFE SI-8000HFE SI-8000FFE
0.588 (6.0
Recommended Silicone Grease
Shin-Etsu Chemical Co., Ltd.: G746 Momentive Performance Materials Inc.: YG-6260 Corning Toray Silicone Co., Ltd.: SC102 Please select proper silicone grease carefully since some grease products penetrate device result extremely short device life.
Internal Power Dissipation
obtained from following formula. device with built-in flywheel diode: device with external flywheel diode: Efficiency depends input/output conditions. Please refer efficiency characteristics devices. (Posted site.) VIN: Output voltage Input voltage Output current Efficiency(%) Diode forward voltage
Others
Devices operated parallel connection aiming larger current. applicable current boost voltage step-up use.
Rectifier Diodes Power Supplies
rectify input using rectifier diodes power supplies, please SANKEN rectifier diodes shown following list. (Please centertap bridge configuration using stand-alone type diodes.)
Series Name Series SI-8000E Series SI-8000GL Series SI-8000JD Series SI-8000JF Series SI-8000Series SI-8000TFE Series SI-8000S Series SI-8000SD Series SI-8000W Series SI-8011NVS Series SI-8400L Series SI-8500L Series SI-8511NVS Series SPI-8000A Series STA810M Series STA820M Series SI-8000HFE Series SI-8000Q Series SI-8100QL Series SI-8000FFE Series SI-8000FD Series SI-8000HD Series Diodes SJPM-H2 (Surface-Mount Stand-Alone Type, VRM=200V,Io=2.0A) AM01Z (Axial Type,VRM=200V,Io=1.0A)
RM10Z (Axial Type,VRM=200V,Io=1.5A)
Thermal Design
maximum junction temperature Tj(max) given Absolute Maximum Ratings specific each product type must strictly observed. Thus, thermal design must consider maximum power dissipation PD(max), which varies conditions use, maximum ambient temperature Ta(max). simplify thermal design, Ta-PD characteristic graphs provided herein. Please observe following steps heatsink design: Obtain maximum ambient temperature Ta(max). Obtain maximum power dissipation PD(max). Look intersection point Ta-PD characteristic graph determine size heatsink. Although heatsink size obtained, actual applications, 10-to20% derating factor generally introduced. Moreover, heat dissipation capacity heatsink highly depends mounted. Thus, recommended measure heatsink case temperature actual operating environment. Please refer Ta-PD characteristic graphs respective product types.
RM4Z (Axial Type,VRM=200V,Io=3.0A) AM01Z (Axial Type,VRM=200V,Io=1.0A) RM4Z (Axial Type,VRM=200V,Io=3.0A) AM01Z (Axial Type,VRM=200V,Io=1.0A) RM10Z (Axial Type,VRM=200V,Io=1.5A) RM4Z (Axial Type,VRM=200V,Io=3.0A) RM10Z (Axial Type,VRM=200V,Io=1.5A) RM4Z (Axial Type,VRM=200V,Io=3.0A)
RBV-1506 (Bridge Type, VRM=600V,Io=15A)
1-1-2 Switching Mode Regulator
Series Surface-Mount, Separate Excitation Step-down Switching Mode Regulator
Features
Surface-mount power package Output current: 0.5A High efficiency: Requires only discrete components Internally-adjusted phase correction output voltage Built-in reference oscillator (60kHz) Built-in overcurrent thermal protection circuits
Line
Part Number VO(V) IO(A) SAI01 SAI02 SAI03 12.0 SAI06
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation Junction Temperature Storage Temperature Thermal Resistance(junction case) Symbol Tstg Ratings 0.75 +125 +125 Unit °C/W
Applications
Power supplies telecommunication equipment Onboard local power supplies
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range Operating Junction Temperature Range Symbol Tjop SAI01 +125 SAI02 SAI03 SAI06 Unit
Electrical Characteristics
Ratings Parameter Symbol min. Output Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current Conditions 4.80 SAI01 typ. 5.00 VIN=20V, IO=0.3A VIN=20V, IO=0.3A VIN=20V, IO=0.3A VIN=10 30V, IO=0.3A VIN=20V, IO=0.1 0.4A ±0.5 f=100 120HZ 0.55 VIN=10V 0.55 VIN=8V max. 5.20 min. 3.17 SAI02 typ. 3.30 VIN=15V, IO=0.3A VIN=15V, IO=0.3A VIN=15V, IO=0.3A VIN=8 28V, IO=0.3A VIN=15V, IO=0.1 0.4A ±0.5 f=100 120HZ 0.45 VIN=18V max. 3.43 min. 11.40 SAI03 typ. 12.00 VIN=24V, IO=0.3A VIN=24V, IO=0.3A VIN=24V, IO=0.3A VIN=18 30V, IO=0.3A VIN=24V, IO=0.1 0.4A ±1.5 f=100 120HZ 0.45 VIN=15V max. 12.60 min. 8.55 SAI06 typ. 9.00 VIN=21V, IO=0.3A VIN=21V, IO=0.3A VIN=21V, IO=0.3A VIN=15 30V, IO=0.3A VIN=21V, IO=0.1 0.4A ±1.0 f=100 120HZ max. 9.45
(Ta=25°C) Unit
mV/°C
Conditions Conditions VOLINE Conditions VOLOAD Conditions VO/Ta RREJ Conditions Conditions
Series
External Dimensions (PS4)
±0.25 max. ±0.2
(unit
3VOS .GND
+0.15 0.75 -0.05
1VIN
±0.15
max.
±0.2
Part Number Number Case Temperature Measuring Point Assignment SWOUT Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.22g
0.89
2.54
4.32
±0.2 max.
±0.5 ±0.2
0~0.15
±0.3
±0.2
±0.3
-0.05
0.25
+0.15
Block Diagram
Reg. SWOUT
Typical Connection Diagram
3.3V 200µH 300µH
SWOUT
Reset Drive Comp.
100µF
SJPB-D4 (Sanken)
330µF
Amp. VREF
Ta-PD Characteristics
Glass epoxy board Natural cooling
Power Dissipation
efficiency depends input voltage output current. Therefore, obtain value from efficiency graph substitute percentage formula above. Output voltage Output current Efficiency Diode forward voltage SJPB-D4-0.3V
Ambient Temperature (°C)
Thermal design must considered separately.
1-1-2 Switching Mode Regulator
SI-8000W Series
Features
Surface-mount package (SOP8) Output current: 0.6A High efficiency: Requires only discrete components
Surface-Mount, Separate Excitation Step-down Switching Mode Regulator
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (Junction 7-Pin Lead) Thermal Resistance (Junction Ambient Air)*1 Symbol Tstg Ratings +125 +125 Unit °C/W °C/W
Internally-adjusted phase correction output voltage adjustment performed internally Built-in reference oscillator (60kHz) Built-in overcurrent thermal protection circuits
Glass-epoxy board 40mm (copper laminate area 4.3%)
Applications
Power supplies telecommunication equipment Onboard local power supplies
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range Operating Junction Temperature Range Symbol Tjop SI-8033W +125 SI-8050W Unit
Electrical Characteristics
Ratings Parameter Symbol min. Output Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient Output Voltage Ripple Rejection Overcurrent Protection Starting Current Conditions 3.17 SI-8033W typ. 3.30 VIN=15V, IO=0.3A VIN=15V, IO=0.3A VIN=15V, IO=0.3A VIN=8 28V, IO=0.3A VIN=15V, IO=0.1 0.4A ±0.5 f=100 120HZ 0.61 VIN=15V 0.61 VIN=20V max. 3.43 min. 4.80 SI-8050W typ. 5.00 VIN=20V, IO=0.3A VIN=20V, IO=0.3A VIN=20V, IO=0.3A VIN=10 30V, IO=0.3A VIN=20V, IO=0.1 0.4A ±0.5 f=100 120HZ max. 5.20
(Ta=25°C) Unit
Conditions Conditions VOLINE Conditions VOLOAD Conditions VO/Ta RREJ Conditions Conditions
SI-8000W Series
External Dimensions (SOP8)
5.1±0.4 1.27 0.4±0.1 0.15+0.1 -0.05
(Unit
0.995max.
1.55±0.15
1.27
Assignment SWOUT Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.1g
4.4±0.2
0.5±0.1 0.05±0.05 1.5±0.1 6.2±0.3
0.10 0.4±0.1 0.12
Block Diagram
Reg. SWOUT
Typical Connection Diagram
200µH SWOUT SJPB-D4 (Sanken)
Reset Drive Comp.
SI-8000W
100µF
Amp. VREF
330µF
Reference Data
Copper Laminate Area Power Dissipation
Tj=100°C Area board 40mm Ta=25°C
Power Dissipation
Copper Laminate Area Thermal Resistance
Area board 40mm
Ta=50°C
Thermal Resistance (°C/W)
Ta=80°C
Copper Laminate Area (mm2) (GND Terminal)
1000
Copper Laminate Area (mm2) (GND Terminal)
1000
1-1-2 Switching Mode Regulator
SI-8000JD Series
Features
Surface-mount package (TO263-5) Output current: 1.5A High efficiency: Requires only discrete components Internally-adjusted phase correction output voltage
Surface-Mount, Separate Excitation Step-down Switching Mode Regulator
Lineup
Part Number VO(V) IO(A) SI-8033JD SI-8050JD SI-8090JD SI-8120JD 12.0
Absolute Maximum Ratings
Parameter Input Voltage Output Current Power Dissipation* Junction Temperature Storage Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air) Symbol Tstg Ratings +125 +125 33.3 Unit °C/W °C/W When mounted glass-epoxy board (copper area 100%) When mounted glass-epoxy board (copper area 100%) Conditions
Capable downsizing choke-coil IC's high switching frequency (125 kHz). (Compared with conventional Sanken devices) Built-in foldback-overcurrent thermal protection circuits Output ON/OFF available (Circuit current output OFF: 200µA max) Soft start available ON/OFF Conditions
Limited thermal protection circuit
Applications
Power supplies telecommunication equipment Onboard local power supplies, etc.
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range* Operating Junction Temperature Range Operating Temperature Range* Symbol VIN1 VIN2 Tjop SI-8033JD SI-8050JD +125 +125 SI-8090JD SI-8120JD Unit Conditions IO=0 IO=0 1.5A VINVO+3V
Limited Ta-PD characteristics
Electrical Characteristics
Ratings Parameter Symbol min. Output Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient Output Voltage Overcurrent Protection Starting Current Level Voltage ON/OFF* Outflow Current Voltage Conditions 3.234 SI-8033JD typ. 3.30 VIN=15V, IO=0.5A VIN=15V, IO=0.5A ±0.5 VIN=15V VIN=15V, Io=0A VIN=15V, VON/OFF=0.3V VIN=20V, Io=0A VIN=20V, VON/OFF=0.3V VIN=20V VSSL=0V VIN=21V, Io=0A VIN=21V, VON/OFF=0.3V VIN=24V, Io=0A VIN=24V, VON/OFF=0.3V VIN=8 30V, IO=0.5A VIN=15V, IO=0.2 0.8A max. 3.366 min. 4.90 SI-8050JD typ. 5.00 VIN=20V, IO=0.5A VIN=20V, IO=0.5A ±0.5 VIN=21V VIN=10 30V, IO=0.5A VIN=20V, IO=0.2 0.8A max. 5.10 min. 8.82 SI-8090JD typ. 9.00 VIN=21V, IO=0.5A VIN=21V, IO=0.5A ±1.0 VIN=24V VIN=15 30V, IO=0.5A VIN=21V, IO=0.2 0.8A max. 9.18 min. 11.76 SI-8120JD typ. 12.00 VIN=24V, IO=0.5A VIN=24V, IO=0.5A ±1.0 VIN=18 30V, IO=0.5A VIN=24V, IO=0.2 0.8A max. 12.24
(Ta=25°C) Unit
VIN=15V, IO=0.5A
VIN=20V, IO=0.5A
VIN=21V, IO=0.5A
VIN=24V, IO=0.5A
Conditions Conditions VOLINE Conditions VOLOAD Conditions VO/Ta Conditions VSSL ISSL Conditions Conditions Iq(oFF) Conditions
Quiescent Circuit Current
ON/OFF pin. Soft start power performed with capacitor connected this pin. output also turned ON/OFF with this pin. output stopped setting voltage this VSSL lower. ON/OFF-pin voltage changed with open-collector drive circuit transistor. When using both soft-start ON/OFF functions together, discharge current from flows into ON/OFF control transistor. Therefore, limit current securely protect transistor capacitance large. ON/OFF pulled power supply applying external voltage prohibited.
SI-8000JD
SI-8000JD
SI-8000JD
ON/OFF
ON/OFF
ON/OFF
VOUT. ON/OFF
Soft Start
Soft Start +VOUT. ON/OFF
SI-8000JD Series
External Dimensions (TO263-5)
Case Temperature Measurement Point 10.0
±0.2
(Unit
±0.2
(0.40)
9.90 (15°)
±0.2
(8.0) 3-R0.3
±0.2 +0.10 -0.05
(4.4)
(4.6)
(1.75)
(6.8)
±0.2
±0.2
±0.2
(3°)
(3°)
±0.1
0.10 (3°)
±0.15
(R0.3)
±0.3
±0.2
0.88
±0.10
(R0.3)
0~6°
±0.1
(0.5) (1.7
±0.25
±0.25 (1.7
±0.1
Assignment SWOUT ON/OFF Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx. 1.48g
9.2±
±0.3
15.3
±0.2
15.30
±0.3
(0.75)
2.54
(1.7
±0.25
±0.25 (1.7
(3°) 2-R0.3 10.0
±0.02
(3°)
Block Diagram
PReg. ON/OFF ON/OFF Soft Start Reset
Typical Connection Diagram
VOUT
±0.2
SI-8000JD
ON/OFF
Latch Drive
Comp. Error Amp.
VREF
50V/220µF 25V/470µF 10V/0.47µF (Only when using soft-start function) 100µH SJPB-H6 (Sanken)
Reference Data
Copper Laminate Area Glass Epoxy Board Thermal Resistance (Junction Ambient Air) (Typical Value)
Thermal Resistance (junction ambient air) (°C/W
Output Current Power Dissipation (Typical)
With glass epoxy board
Power Dissipation
1000
1200
1400
1600
1800
Copper Laminate Area (mm2)
Output Current
Ta-PD Characteristics
Copper Area 33.3°C/W) 37°C/W) :44°C/W) 53°C/W)
Power Dissipation
efficiency depends input voltage output current. Therefore, obtain value from efficiency graph substitute percentage formula above. Output Voltage Input Voltage Output Current
Efficiency
forward voltage 0.4V(IO=2A)(SJPB-H6) Thermal design must considered separately.
Ambient Temperature (°C)
1-1-2 Switching Mode Regulator
SI-8000Series
Features
Surface-Mount, Separate Excitation Step-down Switching Mode Regulator
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation Junction Temperature* Storage Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air) Symbol Tstg Ratings 1.06 1.65 +150 +150 Unit °C/W °C/W When mounted glass-epoxy board (900 copper area 4.3%) When mounted glass-epoxy board (900 copper area 4.3%) When mounted glass-epoxy board (900 copper area 50%) Conditions
Compact surface-mount package (TO252-5) Output current: High efficiency: typ. Requires only discrete components Built-in reference oscillator (300 kHz) Built-in drooping-type-overcurrent thermal protection circuits Output ON/OFF available (circuit current output OFF: typ.) Soft start available ON/OFF
This product built-in thermal protection circuits that operate when junction temperature rises above 130°C. recommended design junction temperature during operation below 125°C.
Applications
Onboard local power supplies equipment equipment
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Voltage Output Current Range Operating Junction Temperature Range Operating Temperature Range Symbol Tjop SI-8008VO+3*1 +125 +125 Unit
minimum value input voltage range higher
Electrical Characteristics
Rating Parameter Symbol
(Ta=25°C)
Reference Voltage Temperature Coefficient Reference Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Overcurrent Protection Starting Current
VADJ
Conditions VADJ/T Conditions
min. 0.784
Conditions
SI-8008typ. 0.800 VIN=15V, Io=0.1A ±0.1 VIN=15V, Io=0.1A, Tc=0 100°C VIN=15V, Io=0.5A
Unit
max. 0.816
mV/°C
Conditions VOLINE Conditions VOLOAD Conditions
VIN=15V, Io=0.5A VIN=10 30V, Io=0.5A VIN=15V, Io=0.2 1.5A
Conditions
VIN=15V VSSL=0V VIN=15V, Io=0A VIN=15V, VSS=0V
Level Voltage VSSL ON/OFF Pin* Outflow Current Voltage
ISSL
Conditions
Quiescent Circuit Current Conditions
(OFF)
Conditions
pin. Soft start power performed with capacitor connected this pin. output also turned ON/OFF with this pin. output stopped setting voltage this VSSL lower. SS-pin voltage changed with open-collector drive circuit transistor. When using both soft-start ON/OFF functions together, discharge current from flows into ON/OFF control transistor. Therefore, limit current securely protect transistor capacitance large. pulled power supply applying external voltage prohibited. used, leave open.
SI-8000
SI-8000
SI-8000
ON/OFF
Soft start
Soft start +VO. ON/OFF
SI-8000Series
External Dimensions (TO252-5)
6.60±0.20 6.60 5.34±0.20
(5°)
±0.20
(Unit
2.30±0.20 0.50
±0.10
5.34±0.20 (5.04) (1.50)
1.10
±0.20
9.90
(5°)
(5°)
1.524+0.254 -0.127
2.70±0.20
2.70±0.20
(0.89)
9.90
SEATING PLANE 0.00 0.127
Assignment Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 0.33
6.10±0.20
±0.30
(4.41)
0.50±0.10
0.70 0.50 1.27 1.27 2.30±0.20
±0.10
(1.00)
Block Diagram
Typical Connection Diagram
L47µH
SI-8008
±0.30
PReg. Overcurrent Protection Reset
SI-8000220µF
IADJ
470µF
ON/OFF Soft Start
Latch Drive
Comp.
Thermal Protection
Error Amp.
Reference Voltage
220µF 470µF (Only when using soft-start function) 47µF SJPB-H6 (Sanken)
1-1-2 Switching Mode Regulator
SI-8000SD Series
Features
Surface-mount package (TO263-5) Output current: 3.0A
Surface Mount, Separate Excitation Step-down Switching Mode Regulator
Lineup
Part Number SI-8033SD SI-8050SD
High efficiency: typ. (SI-8033SD), typ. (SI-8050SD) Requires only discrete external components Internally-adjusted phase correction output voltage Built-in reference oscillator (60kHz) Built-in overcurrent thermal protection circuits Output ON/OFF available Soft start available
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation*2 Junction Temperature Storage Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air) Symbol Tstg Ratings 43*1 +125 +125 33.3 Unit °C/W °C/W When mounted glass-epoxy board (copper area: 100%) When mounted glass-epoxy board (copper area: 100%) Conditions
Applications
Power supplies telecommunication equipment Onboard local power supplies
SI-8033SD Limited thermal protection circuit.
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Current Range* Operating Junction Temperature Range Operating Temperature Range* Symbol VIN1 Tjop SI-8033SD +125 +125 SI-8050SD Unit
Limited Ta-PD characteristics.
Electrical Characteristics
Ratings Parameter Symbol min. Output Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient Output Voltage Overcurrent Protection Starting Current Soft Start Pin* Low-Level Voltage Outflow Current Voltage Conditions 3.17 SI-8033SD typ. VIN=15V, IO=1A VIN=15V, IO=1A VIN=15V, IO=1A VIN=8 28V, IO=1A VIN=15V, IO=0.5 1.5A ±0.5 VIN=15V VSSL=0.2V VIN=20V max. 3.43 min. SI-8050SD typ. VIN=20V, IO=1A VIN=20V, IO=1A VIN=20V, IO=1A VIN=10 30V, IO=1A VIN=20V, IO=0.5 1.5A ±0.5 max.
(Ta=25°C) Unit
mV/°C
Conditions Conditions VOLINE Conditions VOLOAD Conditions VO/Ta Conditions VSSL ISSL Conditions
soft start pin. Soft start power performed with capacitor connected this pin. output also turned ON/OFF with this pin. output stopped setting voltage this VSSL lower. Soft-start voltage changed with open-collector drive circuit transistor. When using both soft-start ON/OFF functions together, discharge current from flows into ON/OFF control transistor. Therefore, limit current securely protect transistor capacitance large. ON/OFF pulled power supply applying external voltage prohibited. this used, leave open.
SI-8000SD
SI-8000SD
SI-8000SD
ON/OFF
ON/OFF
ON/OFF
VOUT. ON/OFF
Soft start
Soft start +VOUT. ON/OFF
SI-8000SD Series
External Dimensions (TO263-5)
Case temperature measurement point
(0.40)
(Unit
10.0
±0.2
9.90 (15°)
±0.2
±0.2
(8.0) 3-R0.3
±0.2
(4.4) +0.10 -0.05
(1.75)
(6.8)
±0.2
9.2±
±0.3
15.3
(3°)
±0.1
0.10 (3°)
±0.15
15.30
±0.3
±0.2
±0.2
(3°)
Assignment SWOUT Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx. 1.48g
(4.6)
(R0.3)
±0.3
±0.2
±0.2
(0.75)
0.88
±0.10
(R0.3)
2.54
0~6°
±0.1
(0.5) (1.7
±0.25
±0.25 (1.7
±0.1
(1.7
±0.25
±0.25 (1.7
(3°) 2-R0.3 10.0
±0.02
(3°)
Block Diagram
Reference Data
Copper Laminate Area Glass Epoxy Board thermal resistance (junction ambient air) (Typical Value)
Internal power supply
SWOUT
Overcurrent protection
Thermal resistance (junction ambient air) (°C/W)
With glass epoxy board
Oscillator
Reset
Latch driver
Comparator
Thermal protection
Error amplifier
±0.2
Reference voltage
1000
1200
1400
1600
1800
Copper Laminate Area (mm2)
Typical Connection Diagram
SWOUT VOUT
SI-8000SD
50V/1000µF 50V/1000µF 0.01µF (only when soft start function used) 150µH SPB-G56 (Sanken)
Diode sure Schottky-barrier diode other diodes like fast recovery diodes used, destroyed because reverse voltage generated recovery voltage voltage. Choke coil winding resistance choke coil high, efficiency drop below rated value. overcurrent protection starting current about take care concerning heat radiation from choke coil caused magnetic saturation overload short-circuited load. Capacitors large ripple currents flow through high-frequency low-impedance capacitors aiming switching-mode-power-supply use. Especially when impedance high, switching waveform become abnormal temperatures. capacitor with extremely equivalent series resistance (ESR) such capacitor tantalum capacitor, which cause abnormal oscillation. capacitor soft start. Leave open soft start function used. This pulled with pull-up resistor inside ICs. create optimum operating conditions, place components close possible each other.
1-1-2 Switching Mode Regulator
SPI-8000A Series
Features
Surface-mount package Output current: 3.0A
Surface Mount, Separate Excitation Step-down Switching Mode Regulator
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation Junction Temperature Storage Temperature Thermal Resistance (junction case) Thermal Resistance (junction ambient air) Symbol PD*1, Tstg Ratings +125 +125 Unit °C/W °C/W (Ta=25°C)
High efficiency: 10V, Capable downsizing choke-coil IC's high switching frequency (125kHz). (Compared with conventional Sanken devices) output-voltage-variable type vary output voltage from because reference voltage (Vref) Wide Input Voltage Range 50V) Output ON/OFF available Built-in overcurrent thermal protection circuits
j-c*2 j-a*2
Limited thermal protection. When mounted glass-epoxy board 700cm2 (copper laminate area 30.8cm2).
Applications
Onboard local power supplies equipment stabilization secondary-side output voltage switching power supplies
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Voltage Range Output Current Range Operating Junction Temperature Range Operating Temperature Range Symbol Tjop SPI-8010A Vo+3)*1 0.02 +125 +125
minimum value input voltage range higher either VO+3V.
Electrical Characteristics
Rating Parameter Symbol min. Reference Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient Reference Voltage Overcurrent Protection Starting Current Quiescent Circuit Current Circuit Current Output CE/SS Terminal Level Voltage Outflow Current Voltage VADJ Conditions Conditions FOSC Conditions VOLINE Conditions VOLOAD Conditions VADJ/Ta Conditions Conditions Iq(off) Conditions VSSL ISSL Conditions VSSL=0V VIN=12V, VON/OFF=0.3V VIN=12V VIN=12V, IO=0A 0.97 SPI-8010A (Variable type) typ. 1.00 VIN=12V, IO=1A VIN=20V, IO=1A, VO=5V VIN=12V, IO=1A VIN=10 30V, IO=1A VIN=12V, IO=0.1 1.5A ±0.5 max. 1.03
(Ta=25°C) Unit
mV/°C
CE/SS pin. Soft start power performed with capacitor connected this pin. output also turned ON/OFF with this pin. output stopped setting voltage this VSSL lower. CE/SS-pin voltage changed with opencollector drive circuit transistor. When using both soft-start ON/OFF functions together, discharge current from flows into ON/OFF control transistor. Therefore, limit current securely protect transistor capacitance large. CE/SS pulled power supply applying external voltage prohibited.
SPI-8000A
SPI-8000A
SPI-8000A
CE/SS
CE/SS
CE/SS
ON/OFF
Soft start
Soft start +VO. ON/OFF
SPI-8000A Series
External Dimensions (HSOP16)
1+0.1/-0.05 (Heatsink thickness) 10.5±0.2
(Unit
2.0+0.2/-0.08
8010A
2.75MAX
2.5±0.2
0.25+0.15/-0.05
10.5±0.3
12.2±0.2
(Gate remains: included dimensions)
0.10
(11)
Assignment 1.AGND 2.N.C 3.DGND 4.CE/SS 5.Reg 6.N.C 7.SWOUT 8.N.C 9.N.C 10.N.C 11.VIN 12.B.S 13.N.C 14.Comp 15.VREF 16.N.C Product Mass Approx 0.86g
(4.5)
1.27±0.25
0.4+0.15/-0.05
Block Diagram
SPI-8010A
UVLO CE/SS CE/SS
P.REG
Boot
7.5±0.2
DRIVE
LOGIC
SWOUT
VREF Comp
1-1-2 Switching Mode Regulator
Typical Connection Diagram
SPI-8010A
CE/SS
SPI-8010A
SWOUT
Comp AGND
DGND VREF
IREF
220µF/63V 470µF/25V 0.1µF 1000pF 0.1µF 0.047µF 0.1µF 0.1µF 6800pF 47µH SPB-G56S (Sanken)
Diode sure Schottky-barrier diode other diodes like fast recovery diodes used, destroyed because reverse voltage generated recovery voltage voltage. Choke coil winding resistance choke coil high, efficiency drop below rated value. overcurrent protection starting current about 4.5A, take care concerning heat radiation from choke coil caused magnetic saturation overload short-circuited load. Capacitors large ripple currents flow through high-frequency low-impedance capacitors aiming switching-mode-power-supply use. Especially when impedance high, switching waveform become abnormal temperatures. capacitor with extremely equivalent series resistance (ESR) such capacitor tantalum capacitor, which cause abnormal oscillation. Resistors resistors output voltage. their values that IREF becomes approx. 2mA. Obtain values following formula: VREF (VOUT-VREF) (VOUT-1) 500() IREF IREF
create optimum operating conditions, place components close possible each other.
Ta-PD Characteristics
3.00
PD=VO
Power Dissipation
2.50
j-a:41.7°C/W(30.8cm
j-a:47.6°C/W(8.64cm2)
2.00
j-a:62.5°C/W(0.84cm2)
1.50
Note efficiency depends input voltage output current. Therefore, obtain value from efficiency graph substitute percentage formula above. Note Thermal design must considered separately. Output voltage Input voltage Output current Efficiency Diode forward voltage
1.00
0.50
Ambient Temperature (°C)
1-1-2 Switching Mode Regulator
SI-8000Q Series Surface Mount, Current Mode Cntrol Step-down Switching Mode Regulator
Features
Compact surface-mount package (HSOP8) Introduction current mode control method Output current: High efficiency: Built-in reference oscillator (500 kHz) Built-in drooping-type overcurrent thermal protection circuits Built-in soft start circuit Built-in on/off function (Active current consumption during
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation Junction Temperature Storage Temperature Thermal Resistance(junction case) Thermal Resistance(junction ambient air) Symbol Tstg Ratings 1.35 +150 +150 Unit °C/W °C/W When mounted glass-epoxy board, (copper laminate area: When mounted glass-epoxy board, (copper laminate area: Conditions
Limited thermal protection circuit Note that detection temperature thermal protection about 140°C.
Applications
recorder, FPD-TV Onboard local power supplies equipment
Recommended Operating Conditions
Ratings Parameter Input Voltage Range Output Voltage Range Output Current Range Operating Junction Temperature Range Operating Temperature Range Symbol Tjop SI-8005Q Vo+1*1 +125 Unit Cinditions
minimum value input voltage range 4.75 whichever higher.
Electrical Characteristics
Parameter Symbol min. Reference Voltage Temperature Coefficient Reference Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Overcurrent Protection Starting Current VADJ Conditions VADJ/T Conditions 0.485
(R1=4.2k, R2=0.8k when 25°C Vo=5V)
Rating SI-8005Q typ. 0.500 VIN=12V, Io=1A 0.05 VIN=12V, Io=1A, Ta=-40 +85°C Conditions VIN=12V, Io=1A Conditions VIN=16V, Io=1A VIN=8 28V, Io=1A VIN=12V, Io=0.1 3.5A Conditions VIN=12V Conditions VIN=12V, Io=0A, VEN=open VIN=12V, Io=0A, VEN=0V Conditions VIN=16V, VSSL=0V VIN=12V VIN=12V Conditions VEN=0V 1000 0.35 max. 0.515 Unit
VOLINE Conditions VOLOAD Conditions
Quiescent Circuit Current
Iq(OFF) Conditions Outflow Current Voltage High Level Voltage Level Voltage Inflow Current Voltage Error Amplifier Voltage Gain Error Amplifier Transformer Conductance Current Sense Amplifier Impedance Maximum Duty Minimum Time ISSL Vc/EN Conditions Vc/EL Conditions IC/EH 1/GCS DMAX DMIN
µA/V
nsec.
pin. Soft start power performed with capacitor connected this pin. pulled power supply applying external voltage prohibited.
SI-8008Q
Soft start
SI-8000Q Series
External Dimensions (HSOP8)
(Unit
4.40
6.20
Mark
0.695 5.20 1.50
Enlarged View
Assignment 4GND 6COMP Plastic Mold Package Type Flammability: 94V-0
0.05±0.05 0.15
1.27 0.40 (0.52) (0.27) 0.30
2.20 2.70
0.08±0.08
2.90
Product Mass: Approx.
0.30
(0.55)
Block Diagram
5v_ldo
Current Sense Boot
P.REG VREF
0.5V
LOGIC
Drive 5v_ldo
COMP UVLO
0.5V
Typical Connection Diagram
C1:10µF/50V (Murata:GRM55DB31H106KA87) C2:22µF/16V (Murata:GRM32ER71A226KE20) C3:560pF (Murata:GRM18 Type) C4:10nF (murata: GRM18 Type) C5:10nF (murata: GRM18 Type) L1:10µH SPB-G56S (Sanken) SJPB-L4 (Sanken) R1:46k (Vo=5V) R2:5.1k R3:24k
IADJ
SI-8000Q
COMP
OPEN
1-1-2 Switching Mode Regulator
SI-8000FD Series Surface Mount, Separate Excitation Step-down Switching Mode Regulator
Features
Output current: High efficiency: Requires only discrete components Built-in reference oscillator (300 kHz) Built-in drooping-type overcurrent thermal protection circuits Built-in soft start circuit (Output ON/OFF available) SI-8001FDE Built-in on/off function (active Low) SI-8001FDL current consumption during SI-8001FDL
Input Voltage ON/OFF Control Voltage Power Dissipation*1 Junction Temperature*2 Storage Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air)
Lineup
Part Number VO(V) IO(A) Package Function Soft start SI-8001FDE Variable(0.8 TO263-5 ON/OFF SI-8001FDL
Absolute Maximum Ratings
Parameter Symbol Tstg +150 +150 33.3*1 Ratings SI-8001FDE SI-8001FDL Unit °C/W °C/W When mounted glass-epoxy board measuring (copper laminate area: 100%) When mounted glass-epoxy board measuring (copper laminate area: 100%) When mounted glass-epoxy board measuring (copper laminate area: 100%) Conditions
Applications
recorder, FPD-TV equipment, such printers Onboard local power supplies
Limited thermal protection circuit This product built-in thermal protection circuits that activate when junction temperature exceeds 130°C. recommended design junction temperature during operation below 125°C.
Recommended Operating Conditions
Parameter Input Voltage Range Symbol Ratings SI-8001FDE Vo+3*1 +100 SI-8050FDL Unit
Output Voltage Range Output Current Range Operating Junction Temperature Range Tjop Operating Temperature Range minimum value input voltage range whichever higher.
Electrical Characteristics
Ratings Parameter Symbol min. Reference Voltage Temperature Coefficient Reference Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Overcurrent Protection Starting Current Level Voltage Pin*1 Outflow Cuurent Voltage ON/OFF Control Voltage (Output ON/OFF Pin*2 ON/OFF Control Voltage (Output off) ON/OFF Controll Current (Output VADJ Conditions VADJ/T Conditions 0.784 SI-8001FDE typ. 0.800 VIN=15V, Io=0.2A ±0.1 VIN=15V, Io=0.2A, Tc=0 100°C VIN=15V, Io=2A VIN=15V, Io=2A VIN=10 30V, Io=2A VIN=15V, Io=0.2 3.5A VIN=15V VIN=15V, VSS=0V VIN=15V, Io=0A VIN=15V, Vss=0V max. 0.816 min. 0.784
(R1=4.2k, R2=0.8k when 25°C Vo=5V)
SI-8001FDL typ. 0.800 VIN=15V, Io=0.2A ±0.1 VIN=15V, Io=0.2A, Tc=0 100°C VIN=15V, Io=2A VIN=15V, Io=2A VIN=10 30V, Io=2A VIN=15V, Io=0.2 3.5A VIN=15V Vc=2V VIN=15V, Io=0A VIN=15V, Vc=2V max. 0.816
Unit
Conditions Conditions VOLINE Conditions VOLOAD Conditions Conditions VSSL ISSL Conditions Conditions Conditions Iq(OFF) Conditions
Quiescent Circuit Current
pin. Soft start power performed with capacitor connected this pin. output also turned ON/OFF with this pin. output stopped setting voltage this VSSL lower. SS-pin voltage changed with open-collector drive circuit transistor. When using both soft-start ON/OFF functions together, discharge current from flows into ON/OFF control transistor. Therefore, limit current securely protect transistor capacitance large. pulled (3.7 typ.) power supply applying external voltage prohibited. this used, leave open. Output when output control terminal open. Each input level equivalent LS-TTL. Therefore, device driven directly LS-TTLs.
SI-8001FDE
SI-8001FDE
SI-8001FDE
VO.ON/OFF
Soft start
Soft start +Vo. On/OFF
SI-8000FD Series
External Dimensions (TO263-5)
Case Temperature Measurement Point
(0.40)
±0.2
(Unit
10.0
±0.2
(8.0) 3-R0.3
±0.2
(15°)
(4.4) +0.10 -0.05
(1.75)
(4.6)
(6.8)
±0.2
9.2±
±0.3
15.3
(3°)
±0.1
0.10 (3°)
±0.15
(R0.3)
±0.3
±0.2
±0.2
15.30
±0.3
(0.75)
0.88
±0.10
(R0.3)
2.54
0~6°
±0.1
(0.5) (1.7
±0.25
±0.2
±0.25 (1.7 (3°)
±0.1
(1.7
±0.25
±0.25 (1.7
±0.2
±0.2
±0.2
(3°)
Assignment (Common rear side product) VADJ Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx. 1.48g
(3°) 2-R0.3 10.0
±0.02
Block Diagram
SI-8001FDE SI-8001FDL
PReg.
PReg. Latch Drive
ON/OFF Soft start
Reset
Latch Drive
Reset ON/OFF
VADJ Comp.
Comp.
Error Amp.
Error Amp.
VREF
VREF
Typical Connection Diagram
IADJ VOUT
VOUT IADJ
SI-8000FDE
SI-8001FDL
470µF 680µF 0.1µ (Only when using soft-start function) 47µH SPB-G56S (Sanken)
470µF 680µF 47µH SPB-G56S (Sanken)
1-1-2 Switching Mode Regulator
SI-8000HD Series Surface-Mount, Separate Excitation Step-down Switching Mode Regulator
Features
Surface-mount package (TO263-5) Output current: High efficiency: TYP, Requires only discrete components (SI8008HD) Built-in reference oscillator (150 kHz) Built-in drooping-type overcurrent thermal protection circuits Built-in soft start circuit (Output ON/OFF available) current consumption during
Absolute Maximum Ratings
Parameter Input Voltage Power Dissipation*1 Junction Temperature*2 Storage Temperature Thermal Resistance (Junction Case) Thermal Resistance (Junction Ambient Air) Symbol Tstg Ratings +150 +150 33.3 Unit °C/W °C/W When mounted glass-epoxy board measuring (copper laminate area: 100%) When mounted glass-epoxy board measuring (copper laminate area: 100%) When mounted glass-epoxy board measuring (copper laminate area: 100%) Conditions
Limited thermal protection circuit This product built-in thermal protection circuits that activate when junction temperature exceeds 130°C. recommended design junction temperature during operation below 125°C.
Applications
recorder, FPD-TV Onboard local power supplies
Recommended Operating Conditions
Parameter Input Voltage Range Output Voltage Range Output Current Range Operating Junction Temperature Range Operating Temperature Range Symbol Tjop Ratings SI-8008HD Vo+3*1 +100 Unit Vo+3V Conditions
minimum value input voltage range Vo+3 whichever higher.
Electrical Characteristics
Ratings Paramter Symbol min. Reference Voltage Temperature Coefficient Reference Voltage Efficiency Oscillation Frequency Line Regulation Load Regulation Overcurrent Protection Starting Current Level Voltage Outflow Current Voltage VADJ Conditions (VADJ/T) Conditions Conditions Conditions VOLINE Conditions VOLOAD Conditions Conditions VSSL ISSL Conditions Quiescent Circuit Current Conditions Iq(OFF) Conditions VSSL=0V VIN=15V, Io=0A VIN=15V, VSS=0V 0.784 SI-8008HD typ. 0.800 VIN=15V, Io=1A ±0.1 VIN=15V, Io=1A, Tc=0 100°C VIN=15V, Io=3A VIN=15V, Io=3A VIN=10 30V, Io=3A VIN=15V, Io=0.2 5.5A VIN=15V
(R1=4.2k, R2=0.8k when Ta=25°C Vo=5V) Unit max. 0.816 mV/°C
pin. Soft start power performed with capacitor connected this pin. output also turned ON/OFF with this pin. output stopped setting voltage this VSSL lower. SS-pin voltage changed with open-collector drive circuit transistor. When using both soft-start ON/OFF functions together, discharge current from flows into control transistor. Therefore, limit current securely protect transistor capacitance large. pulled (3.7 typ.) power supply applying external voltage prohibited. this used, leave open.
SI-8008HD
SI-8008HD
SI-8008HD
VO.ON/OFF
Soft start
Soft start +Vo. On/OFF
SI-8000HD Series
External Dimensions (TO263-5)
Case Temperature Measurement Point 10.0
±0.2
(Unit
(0.40)
9.90 (15°)
±0.2
±0.2
(8.0) 3-R0.3
±0.2
(4.4) +0.10 -0.05
(6.8)
±0.2
9.2±
±0.3
15.3
(3°)
±0.1
0.10 (3°)
±0.15
(R0.3)
±0.3
±0.2
15.30
±0.3
±0.2
±0.2
(3°)
Assignment SWOUT Plastic Mold Package Type Flammability: 94V-0 Product Mass: Approx. 1.48
(4.6)
±0.2
(1.75)
(0.75)
0.88
±0.10
(R0.3)
2.54
0~6°
±0.1
(0.5) (1.7
±0.25
±0.25 (1.7
±0.1
(1.7
±0.25
±0.25 (1.7
(3°) 2-R0.3 10.0
±0.02
(3°)
Block Diagram
SI-8008HD PReg.
ON/OFF Soft start
±0.2
Latch Drive
Reset
Comp. Error Amp.
VREF
Typical Connection Diagram
VOUT
Reference Data
acceptable loss package SI-8000HD series, some ranges available, depending relation between input voltage output current.
SI-8008HD
Thermal Resistance (junction ambient temperature)
Other recent searches
TSOP321 - TSOP321 TSOP321 Datasheet
TSOP323 - TSOP323 TSOP323 Datasheet
SPDM16C11 - SPDM16C11 SPDM16C11 Datasheet
SD57030-01 - SD57030-01 SD57030-01 Datasheet
MGSF1N02LT1 - MGSF1N02LT1 MGSF1N02LT1 Datasheet
EC3101C - EC3101C EC3101C Datasheet
EC3201C - EC3201C EC3201C Datasheet
BWL-2B1K01 - BWL-2B1K01 BWL-2B1K01 Datasheet
AD5405 - AD5405 AD5405 Datasheet
1639050000 - 1639050000 1639050000 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
