16COM/40SEG CONTROLLER/DRIVER GENERAL DESCRIPTION SPLC780A1, dot-

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

16COM/40SEG CONTROLLER/DRIVER GENERAL DESCRIPTION SPLC780A1, dot-

Datasheet Thumbnail

Top Searches for this datasheet

SPLC780A1
16COM/40SEG CONTROLLER/DRIVER
GENERAL DESCRIPTION SPLC780A1, dot-matrix controller driver from SUNPLUS, unique design displaying alpha-numeric, Japanese-Kana characters symbols. SPLC780A1 provides types interfaces MPU: 4-bit 8-bit interfaces. transferring speed 8-bit twice faster than 4-bit. single
SPLC780A1 able display 8-character lines. display capability extended.
cascading with SPLC100 SPLC063,
CMOS technology ensures power saves most efficient
performance keeps highest rank.
FEATURES Character generator ROM: 7200 bits
BLOCK DIAGRAM
OSC1 Timing Generation Circuit Parallel Serial Data Conversion Circuit Busy Flag Character Generator Buffer Instruction Register Instruction Decorder Display Data Bytes 16-bit Shift Register Character Generator Cursor Blink Control Circuit 40-bit Shift Register Latch Circuit Segments Commons Driver SEG40 CL1,CL2
Character font dots: characters Character font dots: characters
OSC2
Character generator RAM: bits
DB3-0 DB7-4 Power Supply Drive (V5-1) Data Register
Character font dots: characters Character font dots: characters
COM16-1
Provide connecting 4-bit 8-bit Direct driver LCD: COMs SEGs Duty factor (selected program):
Address Counter
duty: line dots 1/11 duty: line dots 1/16 duty: lines dots line
Built-in power automatic reset circuit Built-in oscillator circuit (with external resistor) Support external clock operation
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
FUNCTION DESCRIPTION OSCILLATOR SPLC780A1 good oscillator that supports only internal oscillator operation also external clock operation. CONTROL DISPLAY INSTRUCTIONS Control display instructions will show details following: Clear Display Code
clears whole display sets display data RAMs address address counter.
Return Home Code
care sets display data RAMs address address counter display returns original position. blink goes left edge display line lines displayed). Data change. cursor
contents Display
Entry Mode During writing reading data, sets cursor move direction shifts display. Code
Increment, Decrement. display shift, display does shift. I/D=1 I/D=0 shifts display left shifts display right
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
Display On/Off Control Code
Display Display Cursor Cursor
character font
character font
line
Cursor Blinks Blinks
11th line
Cursor Display Shift Without changing RAMs datas, move cursor shift display. Code
Blink display alternately
Description Shift cursor left Shift cursor right Shift display left. Cursor follows display shift Shift display right. Cursor follows display shift
Address Counter
Function Code care sets interface data length. Datas transferred with 8-bit lengths (DB7 Datas transferred with 4-bit lengths (DB7 needs times transfer datas) sets number display line. One-line display. Two-line display. sets character font. dots character font. Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
dots character font. Display Lines Character Font dots dots dots Duty Factor
cannot display lines with character font.
Character Generator Address Code
sets character generator address (aaaaaa)2 address counter. Character generator data read write after this setting.
Display Data Address Code
sets display data address (aaaaaaa)2 address counter. Display data read write after this setting. one-line display (aaaaaaa)2: (00)16 (4F)16. two-line display (aaaaaaa)2: (00)16 (27)16 first line, (aaaaaaa)2: (40)16 (67)16 second line.
Read Busy Flag Address Code
When indicates that system busy now, will accept instruction until busy same time, address counter ccontents`s (aaaaaaa)2 read out.
Write Data Character Generator Display Data Code
writes data (dddddddd)2 character generator display data RAM.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
Read Data from Character Generator Display Data Code
reads data (dddddddd)2 from character generator display data RAM. correct data readout shown belows: address character generator display data shift cursor instruction. (ii) Send Read instruction.
8-Bit operation 8-digit 1-line display (using internal reset)
Instruction
Power SPLC780A1 starts initializing Function DB6DB5DB4DB3DB2 DB1DB0
Display
Operation
Power reset display 8-bit operation select 1-line display line character font
Display control
Display Cursor appear Increase address will shift cursor right when writing display shift Write cursor incremented shifted right Write cursor incremented shifted right
Entry mode
Write data
Write data
Write data WELCOME_ Write cursor incremented shifted right mode display shift when writing Write "(space) cursor incremented shifted right Write cursor incremented shifted right
Entry mode WELCOME_
Write data ELCOME
Write data LCOME
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
Instruction
Write data
Display
COMPAMY_
Operation
Write cursor incremented shifted right Only shift cursor's position left Only shift cursor's position left Write display moves left Shift display cursor's position right Shift display cursor's position right Write space cursor incremented shifted right
Cursor display shift COMPAMY
Cursor display shift COMPAMY
Write data OMPANY
Cursor display shift COMPANY
Cursor display shift COMPANY_
Write data OMPANY
Return home WELCOME
Both display cursor return original position address
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
4-Bit operation 8-digit 1-line display (using internal reset)
Instruction
Power SPLC780A1 starts initializing Function
Display
Operation
Power reset display
4-bit operation
Function 4-bit operation select 1-line display line character font
Display control Increase address will shift cursor right when writing display shift
Display Cursor appears
Entry mode
Write data Write cursor incremented shifted right
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
8-Bit operation 8-digit 2-line display (using internal reset)
Instruction
Power SPLC780A1 starts initializing Function DB6DB5DB4DB3DB2 DB1DB0
Display
Operation
Power reset display 8-bit operation select 2-line display line character font
Display control
Display Cursor appear Increase address will shift cursor right when writing display shift Write cursor incremented shifted right
Entry mode
Write data
Write data WELCOME WELCOME Write cursor incremented shifted right sets RAM's address cursor moved beginning position line Write cursor incremented shifted right
WELCOME_
address
Write data
Write data WELCOME PART_ WELCOME PART_ ELCOME PARTY_ Write cursor incremented shifted right When writing sets mode display shift Write cursor incremented shifted right
Entry mode
Write data
Return home WELCOME PARTY
Both display cursor return original position address
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
RESET FUNCTION power starts internal auto-reset circuit executes initial instructions. There initial procedures shown belows:
8-Bit Interface Power
Wait time after 4.5V
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
checked after following instructions Function Interface bits length Specify number display lines character font number display lines character font cannot changed afterwards Display Display clear Initialization Ends Entry mode
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
4-Bit Interface Power
Wait time after 4.5V
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
Wait time
cannot checked before this instruction Function Interface bits length
checked after following instructions Function interface bits length) Interface bits length Function Interface bits length Specify number display lines character font number display lines character font cannot changed afterwards Display Display clear
Initialization Ends
Entry mode
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
DISPLAY DATA RAM) stores display data size bytes. area that used display used general data RAM. address address counter. There relations between display data RAMs address LCDs position shown belows.
1-line display display characters Display position Display data address
Example 1-line display display characters
Display position Display data address
When display shift operation performed display data RAM's address moves Left shift Right shift
CHARACTER GENERATOR ROM) Using 8-bit character code, character generator generates character patterns. also generate character patterns character patterns. CHARACTER GENERATOR RAM) Using programs, users easily change character patterns character generator RAM. written with dots, character patterns written with dots, character patterns.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
Here SPLC780A1s character patterns shown belows: Correspondence between Character Codes Character Patterns (ROM Code: b7b3 0000 0000 0001 0010 0011 0100 0101 0110 0111 1010 1011 1100 1101 1110 1111
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
Correspondence between Character Codes Character Patterns (ROM Code: b7b3 0000 0010 0011 0100 0101 0110 0111 1010 1011 1100 1101 1110 1111 0000 0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
There relations between character generator addresses, character generator datas (character patterns) character codes shown belows: character patterns
Character Code Data
Address
Character Patterns Data Character Pattern Example Cursor Position Character Pattern Example
Note means that bit0~2 character code correspond bit3~5 address These areas used display used general data
When bit4-7 character code character patterns selected Selected selected care example (1), character code b7-b4 display That means character code (00)16,and (08)16 display character. bits character code character pattern line position. line cursor position display formed logical with cursor.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
character patterns
Character Code Data Address Character Patterns Data Cursor Position Character Pattern Example
Note means that bit1~2 character code correspond bit4~5 address These areas used display used general data
When bit4-7 character code character patterns selected Selected selected care example (1), character code b7-b4 display That means character codes (00)16, (01)16, (08)16,and (09)16 display character. bits character code character pattern line position. 11th line cursor position display formed logical with cursor.
TIMING GENERATION CIRCUIT timing generation circuit generate needed timing signals internal circuits. order prevent
internal timing interface, access timing access timing separately generated.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
DRIVER CIRCUIT There commons segments signal drivers driver circuit. When program specifies
character fonts line numbers, corresponding common signals will output drive waveforms others still output unselected waveforms. CURSOR BLINK CONTROL CIRCUIT generate cursor blink cursor blink control circuit. cursor blink appears digit display data address address counter. When address counter (07) cursors position shown belows:
1-line display digit
Display position Display data address Hexadecimal
cursor position 2-line display digit line line cursor position
INTERFACING There kinds data operations 4-bit operations, other 8-bit operations. Using 4-bit MPU, Using 4-bit
Display position Display data address Hexadecimal
interfacing 4-bit datas transferred 4-busline (DB7 buslines used.
interface 8-bit datas needs times. First, higher order 4-bit datas transferred 4-busline (DB7 Secondly, lower order 4-bit datas transferred 4-busline (DB3 Using 8-bit MPU,
interfacing 8-bit datas transferred 8-buslines (DB7
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
SUPPLY VOLTAGE DRIVE There different voltages that supply SPLC780A1s pins obtain drive waveform. relations bias, duty factor supply voltages shown belows: Duty Factor Supply Voltage Bias
VLCD VLCD VLCD VLCD VLCD VLCD VLCD VLCD VLCD
power connections (1/4 Bias, Bias) shown belows:
VLCD Bias (1/8,1/11 Duty) Bias (1/16 Duty)
VLCD
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
bypass-capacitor improve display`s quality.
VLCD
Bias (1/16 Duty) VLCD
Bias (1/8,1/11 Duty)
bias voltage must have following relations: (volt).
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
relations between frames frequency oscillators frequency (Assume oscillation frequency 250KHz, clock cycle time
Duty clocks
COM1 V2(V3) frame frame (µs) 12800 (µs) 12.8 Frame frequency 78.1 (Hz) 12.8 (ms)
Duty clocks
COM1 V2(V3) frame frame (µs) 17600 (µs) 17.6 56.8 (Hz) Frame frequency 17.6 (ms)
Duty clocks
COM1 frame frame (µs) 12800 (µs) 12.8 78.1 (Hz) Frame frequency 12.8 (ms)
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
REGISTER (Instruction Register) (Data Register) SPLC780A1 8-bit registers (instruction register) (data register). followings, combinations select write(Display clear, etc.) Read busy flag (DB7) address counter (DB6 write Display data Character generator RAM) read (Display data Character generator Operation
written from cannot read MPU. BUSY FLAG (BF) When busy flag output DB7. busy flag SPLC780A1 busy state does accept instructions until busy flag ADDRESS COUNTER (AC) address counter assigns addresses display data character generator RAM. instruction address written address information sent from When
After writing into
reading from) display data character generator RAM, automatically incremented by+1 decremented -1). contents output when
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
PORT CONFIGURATION Input port PMOS Input port PMOS PMOS
NMOS
NMOS
Output port PMOS
NMOS
Input Output port PMOS Enable
PMOS
NMOS
Data
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
DESCRIPTION Mnemonic OSC1 OSC2 Type Power input Ground Both OSC1 OSC2 connected ceramic filter resistor internal oscillator circuit. external clock operation, clock input OSC1. Supply voltage driving. start signal read data write data. signal select read write. Read, Write. signal select register. Data register (for read write) Instruction register (for write), Busy flag address counter (for read). Low-order data bits High-order data bits Clock latch serial data Clock shift serial data Switch signal convert waveform Sends character pattern data corresponding each common signal serially. Selection, Non-selection. SEG40 COM16 Segment signals LCD. Common signals LCD. Description
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
ABSOLUTE MAXIMUM RATINGS Characteristics Operating Voltage Driver Supply Voltage Input Voltage Range Operating Temperature Storage Temperature Symbol VLCD TSTO Ratings -0.3V +7.0V VDD-12V VDD+0.3V -0.3V 0.3V +125
Note: Stresses beyond those given Absolute Maximum Rating table cause operational errors damage device. normal operational conditions AC/DC Electrical Characteristics.
CHARACTERISTICS 4.5V) Characteristics Operating Current Input High Voltage Input Voltage Input High Voltage Input Voltage Input High Current Input Current Output High Voltage (TTL) Output Voltage (TTL) Output High Voltage (CMOS) Output Voltage (CMOS) Driver Resistance (COM) Driver Resistance (SEG) Voltage Symbol Min. VIH1 VIL1 VIH2 VIL2 VOH1 0.7VDD -0.3 0.7VDD -0.2 -1.0 -5.0 0.75VDD Limit Typ. Max. 0.55 0.2VDD Pins: (RS, R/W, 3.0V 0.1mA Pins: 0.1mA Pins: 40µA, Pins: CL1, CL2, 40µA, Pins: CL1, CL2, ±50µA, VLCD RCOM Pins: COM16 ±50µA, VLCD RSEG VLCD 11.0 Pins: SEG40 VDD-V5, bias bias OSC1 External clock (Note) Pins:(E, R/W, Unit Test Condition
VOL1
0.2VDD
VOH2
0.8VDD
VOL2
0.2VDD
Note: FOSC 250KHz, "L", R/W, open, outputs loads.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
CHARACTERISTICS 4.5V) INTERNAL CLOCK OPERATION Characteristics Symbol Min. Frequency FOSC1 Limit Typ. Max. 75K±2% Unit Test Condition
EXTERNAL CLOCK OPERATION Characteristics External Frequency Duty Cycle Rise/Fall Time Symbol Min. FOSC2 Limit Typ. Max. Unit Test Condition
WRITE MODE (Writing data from SPLC780A1) Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Setup Time Data Hold Time Symbol Min. tSP1 tHD1 tSP2 tHD2 1000 Limit Typ. Max. Pins: R/W, Pins: R/W, Pins: Pins: Unit Test Condition
READ MODE (Reading data from SPLC780A1 MPU) Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Output Delay Time Data hold time Symbol Min. tSP1 tHD1 tHD2 1000 Limit Typ. Max. Pins: R/W,E Pins: R/W,E Pins: Unit Test Condition
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
CHARACTERISTICS 5.5V) Characteristics Operating Current Input High Voltage Input Voltage Input High Voltage Input Voltage Input High Current Input Current Output High Voltage (TTL) Output Voltage (TTL) Output High Voltage (CMOS) Output Voltage (CMOS) Driver Resistance (COM) Driver Resistance (SEG) Voltage Symbol Min. VIH1 VIL1 VIH2 VIL2 VOH1 -0.3 VDD-1 -0.2 -2.0 Limit Typ. 0.55 Max. -100 OSC1 OSC1 Pins: (RS, R/W, 5.0V 0.1mA Pins: 0.1mA Pins: 40µA, Pins: CL1, CL2, 40µA, Pins: CL1, CL2, ±50µA, VLCD RCOM Pins: COM16 ±50µA, VLCD RSEG VLCD 11.0 Pins: SEG40 VDD-V5, bias bias External clock (Note) Pins:(E, R/W, Unit Test Condition
VOL1
VOH2
0.9VDD
VOL2
0.1VDD
Note: FOSC 250KHz, "L", R/W, open, outputs loads.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
CHARACTERISTICS 5.5V) INTERNAL CLOCK OPERATION Characteristics Symbol Min. Frequency FOSC1 Limit Typ. Max. K±2% Unit Test Condition
EXTERNAL CLOCK OPERATION Characteristics External Frequency Duty Cycle Rise/Fall Time Symbol Min. FOSC2 Limit Typ. Max. Unit Test Condition
WRITE MODE (Writing Data from SPLC780A1) Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Setup Time Data Hold Time Symbol Min. tSP1 tHD1 tSP2 tHD2 Limit Typ. Max. Pins: R/W, Pins: R/W, Pins: Pins: Unit Test Condition
READ MODE (Reading Data from SPLC780A1 MPU) Characteristics Cycle Time Pulse Width Rise/Fall Time Address Setup Time Address Hold Time Data Output Delay Time Data hold time Symbol Min. tSP1 tHD1 tHD2 Limit Typ. Max. Pins: R/W,E Pins: R/W,E Pins: Unit Test Condition
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
INTERFACE MODE WITH DRIVER (SPLC100A1) Characteristics Clock pulse width high Clock pulse width Clock setup time Data setup time Data hold time delay time Symbol Min. tPWH tPWL tCSP tDSP -1000 Limit Typ. Max. 1000 Pins: CL1, Pins: CL1, Pins: CL1, Pins: Pins: Pins: Unit Test Condition
WRITE MODE TIMING DIAGRAM (Writing Data from SPLC780A1)
VIH1 VIL1 tSP1 VIL1
VIH1 VIL1 tHD1 VIL1 tHD1 VIH1 VIL1 tSP2 VIH1 VIL1 tHD2 VIH1 VIL1 VIL1 VIH1 VIL1
Valid Data
READ MODE TIMING DIAGRAM (Reading Data from SPLC780A1 MPU)
VIH1 VIL1 tSP1 VIH1
VIH1 VIL1 tHD1 VIH1
tHD1 VIH1 VIL1 tHD2 Valid Data VIH1 VIL1 VIL1
VIH1 VIL1 VIH1 VIL1
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
INTERFACE MODE WITH SPLC100A1 TIMING DIAGRAM
0.9VDD
tPWH tCSP
0.9VDD
tPWH
0.9VDD 0.1VDD 0.1VDD
tCSP
0.9VDD 0.1VDD
tPWL
0.9VDD 0.1VDD
tDSP
0.1VDD
APPLICATION NOTES R-OSCILLATOR
oscillation resistor used only internal oscillaotr operation mode.
OSC1 OSC2
when when Since oscillation frequency varies depending OSC1 OSC2 capacitance, wiring length these pins should minimized.
Fosc
Fosc
Rosc Kohms
Rosc Kohms
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
INTERFACE
Interface 8-bit 6805 COM1 COM16 COMMONS PANEL
6805
SPLC780A1 SEG40 SEG1
SEGMENTS
Interface 8-bit IORQ SEG40 SEG1 COM1 COM16 COMMONS PANEL
SPLC780A1
SEGMENTS
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
SPLC780A1 APPLICATION CIRCUIT
MATRIX PANEL
SHL1 SHL2
SPLC100A1
SHL1 SHL2
SPLC100A1
SHL1 SHL2
SPLC100A1
Suggested values 0.0022µF 0.047
Sunplus Technology Co., Ltd.
COM16 (COM8
SPLC780A1
SEG40
V1V2V3 V4V5V6
V1V2 V4V5
V1V2 V4V5
Rev.:
2000.05.05
SPLC780A1
APPLICATIONS
SPLC780A1 COM1 Panel COM8 SEG1 characters line
SEG40 Example dots characters line Bias Duty SPLC780A1 COM1 Panel characters line COM11 SEG1
SEG40 Example dots characters line Bias Duty SPLC780A1 COM1 Panel COM8 COM9 COM16 SEG1 characters lines
SEG40
Example dots characters lines Bias Duty
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
SPLC780A1 COM1 COM8 SEG1 SEG40 COM9 COM16 Example dots characters line Bias Duty
SPLC780A1
SEG1 SEG20 COM1 Panel COM8 characters lines
SEG21 SEG40 Example dots characters lines Bias Duty
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
ASSIGNMENT LOCATIONS ASSIGNMENT
Chip Size: 3810µm 3140µm This substrate should connected
Note: ensure function properly, please bond pins.
Ordering Information Product Number SPLC780A1-nnnnV-C
Note1: Code number (nnnnV) assigned customer. Note2: Code number (nnnn 0000 9999); version
Package Type Chip form
NOTE: SUNPLUS TECHNOLOGY CO., reserves right make changes time without notice order improve design performance supply best possible product.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
LOCATIONS Name OSC1 OSC2 COM1 COM2 COM3 COM4 COM5 COM6 COM7 COM8 COM9 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1738 -1705 -1558 -1411 -1264 -1118 -970 -819 -673 -526 -379 -158 1256 1110 -115 -261 -408 -554 -702 -848 -994 -1142 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1404 Name COM10 COM11 COM12 COM13 COM14 COM15 COM16 SEG40 SEG39 SEG38 SEG37 SEG36 SEG35 SEG34 SEG33 SEG32 SEG31 SEG30 SEG29 SEG28 SEG27 SEG26 SEG25 SEG24 SEG23 SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 1015 1162 1309 1455 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1744 1695 1549 1402 1255 1108 -1404 -1404 -1404 -1404 -1404 -1404 -1404 -1372 -1226 -1078 -932 -786 -638 -492 -345 -199 1122 1406 1406 1406 1406 1406 1406 1406
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
Name SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG9 SEG8 -212 -358 1406 1406 1406 1406 1406 1406 1406 1406 Name SEG7 SEG6 SEG5 SEG4 SEG3 SEG2 SEG1 -505 -652 -799 -945 -1093 -1239 -1386 -1719 1406 1406 1406 1406 1406 1406 1406 1402
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
PACKAGE CONFIGURATION View
SEG23 SEG24 SEG25 SEG26 SEG27 SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 SEG36 SEG37 SEG38
SEG22 SEG21 SEG20 SEG19 SEG18 SEG17 SEG16 SEG15 SEG14 SEG13 SEG12 SEG11 SEG10 SEG09 SEG08 SEG07 SEG06 SEG05 SEG04 SEG03 SEG02 SEG01 OSC1
SEG39 SEG40
COM16 COM15 COM14 COM13 COM12 COM11 COM10 COM9 COM8 COM7 COM6 COM5 COM4 COM3 COM2 COM1
SPLC780-XX
OSC2
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
PACKAGE INFORMATION Outline Dimensions Unit: inch/mm
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05
SPLC780A1
DISCLAIMER information appearing this publication believed accurate. Integrated circuits sold Sunplus Technology covered warranty patent indemnification provisions stipulated terms sale only. SUNPLUS makes warranty, express, statutory implied description regarding information this publication regarding freedom described chip(s) from patent infringement. FURTHER, SUNPLUS MAKES WARRANTY MERCHANTABILITY FITNESS PURPOSE. SUNPLUS reserves right halt production alter specifications prices time without notice. Accordingly, reader cautioned verify that data sheets other information this publication current before placing orders. Products described herein intended normal commercial applications. Applications involving unusual environmental reliability requirements, e.g. military equipment medical life support equipment, specifically recommended without additional processing SUNPLUS such applications. Please note that application circuits illustrated this document reference purposes only.
Sunplus Technology Co., Ltd.
Rev.:
2000.05.05

16COM/40SEG CONTROLLER/DRIVER GENERAL DESCRIPTION SPLC780A1, dot-

Top Searches for this datasheet

Other recent searches