ORDERING INFORMATION SPLC +3.3V POWER SUPPLY SERIAL IDENTIFICATIO

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

ORDERING INFORMATION SPLC +3.3V POWER SUPPLY SERIAL IDENTIFICATIO

Datasheet Thumbnail

Top Searches for this datasheet

SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
ORDERING INFORMATION SPLC
+3.3V POWER SUPPLY SERIAL IDENTIFICATION OPTION Serial WAVELENGTH 850nm (850nm) 1300nm (1310nm) 1300nm (1310nm) 10km 1300nm (1310nm) 20km COMMUNICATIONS PROTOCOL Fibre Channel, 2.125GBaud SONET OC-3, 155MBaud SONET OC-12, 622MBaud Gigabit Ethernet, 1.25GBaud Fibre Channel, 1.0625GBaud SONET OC-48, 2.488GBaud MODULE SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS
Compliant with specification Compliant With ANSI X3T11 Fibre Channel specification optical links Rate Agile Output Cast Metal Housing Serial functionality pluggable Single +3.3V Power Supply PRODUCT OVERVIEW SPLC-20-8-X-SL pluggable transceiver module high performance integrated duplex data link bidirectional communication over single mode multimode optical fiber. compliant with Small Form Factor Pluggable (SFP) specification. SPLC-20 specifically designed high speed Fibre Channel data links 2.125 GBaud. Stratos Fibre Channel transceivers rate agile compatible with laser transmitters. Stratos Lightwave transceiver pluggable which allows suitably designed enclosure changed from type external interface another simply plugging having alternative external interface. SHORT WAVELENGTH LASER short wavelength lasers high volume production processes resulted cost, high performance datalink which communicates reliably distances over 50µm multimode optical fiber with data transfer rates 2.125 GBaud. Stratos 850nm rate agile compatible with legacy 850nm laser transmitter. LONG WAVELENGTH LASER SPLC-20-8-2-SL provided with single mode optics. 1300nm laser provides highly reliable single mode communications which meets exceeds Fibre Channel distance requirements.
6.00 UNITS NOTES
PARAMETER Storage Temperature Supply Voltage Data Voltage Data Voltage
SYMBOL Tstg Tx+, TxTx+,
ground Differential (Tx+ Tx-) ground
MODULE SPECIFICATION RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Ambient Operating Temperature 3.15 Supply Voltage VDDT, VDDR Baud Rate BRate 1.0625 2.125
3.45
UNITS GBaud
NOTES
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
PERFORMANCE SPECIFICATIONS ELECTRICAL
PARAMETER Error Rate Supply Current
SYMBOL Isurge
1E-12
UNITS
NOTES Errors/Bit 25°C, 0°C<Ta<70°C,3.15V<Vcc<3.6V Surge above steady state value
PERFORMANCE SPECIFICATIONS OPTICAL Laser Multimode
PARAMETER FIBER LENGTH Core Diameter 62.5 Core Diameter TRANSMITTER SYMBOL
1084.02
Surge Current TRANSMITTER CML/PECL Input (Differential) 2400 3.45 mVpp Input Impedance (Differential) ohms Tx_DISABLE Input Voltage High Tx_DISABLE Input Voltage Tx_FAULT output voltage high VtoH Vcc-0.5 Vcc+0.3 400µA; Tx_FAULT output voltage VtoL -4.0mA RECEIVER Output (Differential) 1200 mVpp Output Impedance (Differential) Zout ohms Rx_LOS Output Voltage High VroH Vcc-0.5 Vcc+0.3 400µA; Rx_LOS Output Voltage VroL -4.0mA Total Contributed Jitter Vcc+0.3 MOD_DEF 100K ohms
UNITS NOTES Optical Transmit Power Disabled Power level Optical Center Spectral Width Poff Optical Modulation Amplitude Relative Intensity Noise Total Jitter Output Rise, Fall Time RECEIVER Optical Input 0.85 -117 dB/Hz Pk-Pk Optical Input Power Optical Modulation Amplitude Optical Return Loss RX_LOS- Asserted RX_LOS Deasserted RX_LOS Hysteresis 1.0E-12 Pk-Pk
coupled inputs
kohms
coupled outputs
With Serial
Measured RGND/TGND
1.0E-12 2.125 GBaud 1.0E-12 2.125 GBaud
average TX_DISABLE active
measured transition high measured transition high
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
SPLC-20-8-2-SL PERFORMANCE SPECIFICATIONS OPTICAL 1300 Laser Single Mode
AMETER ameter SMITTER Opti enter Opti Modulati Ampli tude sabled Power level Spectral SYMB 1270 1310 1355 OTES 1.0E-12 2.125 GBaud
Ta=25°C, Vcc=3.3V
Pk-Pk Poff Opti Transmi Power Output Fall EIVER Opti Input Power Opti Modulati Ampli tude RX_LOS Asserted RX_LOS easserted RX_LOS hysteresi Pa-Pd
TX_D ISABLE acti
average 1310 average power 1.0E-12 Measured transi Measured transi
SPLC-20-8-2M-SL PERFORMANCE SPECIFICATIONS OPTICAL 1300 Laser Single Mode
AMETER ameter SMITTER SYMB
Ta=25°C, Vcc=3.3V
OTES
1.0E-12 2.125 GBaud
Opti enter
Opti Modulati Ampli tude sabled Power level Spectral
1290
1310
1335
Pk-Pk
Poff
TX_D ISABLE acti
Opti Transmi Power Output Fall EIVER
average 1310 average power 1.0E-12 Measured transi Measured transi
Opti Input Power Opti Modulati Ampli tude RX_LOS Asserted RX_LOS easserted RX_LOS Hysteresi
Pa-Pd
SPLC-20-8 -2L-SL PERFORMANCE SPECIFICATIONS OPTICAL 1300 Laser Single Mode
AMETER ameter SMITTER SYMB
Ta=25°C, Vcc=3.3V
OTES
1.0E-12 2.125 GBaud
Opti enter
Opti Modulati Ampli tude sabled Power level Spectral
1300
1310
1320
Pk-Pk
Poff
TX_D ISABLE acti
Opti Transmi Power Output Fall EIVER
average 1310 average power 1.0E-12 Measured transi Measured transi
Opti Input Power Opti Modulati Ampli tude RX_LOS Asserted RX_LOS easserted RX_LOS Hysteresi
Pa-Pd
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
Plug Sequence: engagement sequence during plugging.
1084.02
(NC)
Figure Diagram Host Board Connector Block Numbers Names
NAME
FUNCTION
VeeT TX_FAULT
Transmitter Ground Transmitter Fault Indication Transmitter Disable
SEQ.
NOTES
Note
TX_DISABLE
Note Module Disables high open Note 3,2: Wire Serial interface Note 3,2: Wire Serial interface Note Grounded Module Note Rate Agile Note Note Note
MOD_DEF MOD_DEF
Module Definition
Module Definition
MOD_DEF Module Definition RATE SELECT Connected Loss Signal VeeR Receiver Ground Receiver Ground
VeeR
VeeR
Receiver Ground
Note
Inverted Received Data Receiver Ground Receiver Power
Note Note
Non-Inverted Received Data
VeeR VccR VccT TDPIN VeeT
Note +3.3V ±5%, Note Note Note Note Note
Transmitter Power
+3.3V ±5%, Note
Transmitter Ground
Non-inverted Data Inverted Data Transmitter Ground
VeeT
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
NOTES:
FAULT: open collector/drain output which should pulled with 4.7K resistor Host board. Pull voltage between 2.0V VccT, R+0.3V. When high, output indicates laser fault some kind. indicates normal operation. state, output will pulled 0.8V.
0.8V): (>0.8, <2.0V): High (2.0 3.465V): Open: Transmitter Undefined Transmitter Disabled Transmitter Disabled MOD-DEF grounded module indicate that module present MOD-DEF clock line wire serial interface serial MOD-DEF data line wire serial interface serial VeeR VeeT internally connected within module.
1084.02
DISABLE: input that used shut down transmitter optical output. pulled within module with 4.7K resistor. states are:
MOD-DEF 0,1,2: These module definition pins. They should pulled with 4.7K resistor host board. Pull voltage between 2.0V VccT, R+0.3V. Table MOD_DEF(0:2) complete description.
RATE SELECT: This optional input used control receiver bandwidth compatibility with multiple data rates (most likely Fibre Channel rates). This signal Implemented Stratos Lightwave transceiver. transceiver designed rate agile which means that inoperable with both Fibre Channel transceivers including those using Laser based legacy transmitter. (Loss Signal) open collector/drain output which should pulled with 4.7K resistor. Pull voltage between 2.0V VccT, R+0.3V. When high, this output indicates received optical signal power below worst case receiver sensitivity. indicates normal operation. state, output will pulled 0.8V.
RD-/+: These differential receiver outputs. They coupled 100ohm differential lines which should terminated with100ohm (differential) user SERDES. coupling done inside module thus required host board. voltage swing these lines will between 1200mV differential (200-600mV single ended) when properly terminated (Figure
VccR VccT: receiver transmitter power supplies. They defined 3.3V±5% connector pin. Maximum supply current 300mA. Recommended host board power supply filtering shown figure When recommended supply filtering network used, plugging module will result inrush current more than 30mA greater than steady state value. VccR VccT internally connected within module. TD-/+: differential receiver inputs. They coupled differential lines with 100ohm differential termination inside module. coupling done inside module thus required host board. inputs will accept differential swing 2400 differential (150-1200mV single ended), though recommended that values between 1200mV differential (250-600 single ended) used best performance.
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
Subsequently, this affords customer ability optimally locate SERDES close SPLC-20 possible save valuable real estate. gigabit rates this provide significant advantage resulting better transmission performance accordingly better signal integrity. Figure illustrates recommended transmit receive data line terminations.
CONNECTOR
Notes: Consult MUX/DEMUX manufacturers applications information biasing required TD+, outputs. Some multi plexer outputs internally biased need external bias resistors. Consult MUX/DEMUX manufacturers data sheet application data appropriate receiver input biasing network.
1084.02
gigabit speeds reduces EMI.
Minimum number external components.
TERMINATION CIRCUITS Inputs SPLC-20 transmitter coupled internally terminated through ohms ground. These modules operate with PECL logic levels. input signal must have least 325mV peak-to-peak (single ended) signal swing. Output from receiver section module also coupled expected drive into load. Different termination strategies required depending particular Serializer/Deserializer chip used. SPLC-20 product family designed with coupled data inputs outputs provide following advantages:
Close positioning SERDES with respect transceiver; allows shorter line lengths
Internal termination reduces potential unterminated stubs which would otherwise increase
jitter reduce transmission margin.
HOST BOARD
PECL/CML TRANSMIT DATA
PECL/CML TRANSMIT DATA
Note
BIAS
RECEIVE DATA
RECEIVE DATA
Note
FIGURE Example termination circuits Drivers Receivers host
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
POWER COUPLING
suggested layout power ground connections given figure below. Connections made separate voltage ground planes. mounting posts case ground should connected circuit ground. ferrite bead should provide real impedance ohms 1000 MHz. Bypass capacitors should placed close connector possible. BOTTOM VIEW
Figure Suggested Power Coupling
Module Definitioin MOD_DEF(0) MOD_DEF(1)
Figure Suggested Power Coupling
MOD_DEF DETERMINATION module definition that installed indicated module definition pins. host shall provide 4.7K pullup resistor VDDT. assigned values MOD_DEF(0:2) shown table value indicates that makes connection pin.
MOD_DEF(2) Interpretation host GBIC present Copper Style Style connector, 1.0625 Gbd, 100-TW-EL-S 100-TP-EL-S, active inter-enclosure connection IEEE802.3 1000BASE-CX Copper Style Style connector, 1.0625 Gbd, 100-TW-EL-S 100-TP-EL-S, active passive inter-enclosure connection IEEE802.3 1000BASE-CX Optical 1.0625 100-SM-LC-L Serial module definition protocol Optical 1.0625 100-M5-SN-I 100-M6-SN-I Optical 1.0625 Gbd, 100-Sm-LC-L similar 1.25 IEEE 802.3z 1000BASELX, single mode. Optical 1.0625 Gbd, 100-M5-SN-1 100-M6-SN-I 1.25 Gbd, IEEE 802.3z 1000BASE-SX
Table MOD_DEF(0:2)
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
TIMING PARAMETERS timing parameters management shown table
PARAMETER TX_DISABLE assert time TX_DISABLE negate time SYMBOL t_off t_on MIN. MAX. UNIT µsec CONDITIONS Timing from rising edge TX_DISABLE when optical output falls below nominal Timing from falling edge TX_DISABLE when modulated optical output rises above nominal From power negation TX_FAULT using TX_DISABLE Time from fault TX_FAULT
1084.02
Time initialize includes reset TX_FAULT TX_FAULT Assert Time Disable reset RX_LOS Assert time RX_LOS Deassert time Rate-Select Change time t_init t_fault t_reset t_loss_on t_loss_off t_ratesel Serial Clock Rate f_serial_clock
Time Disable must held high reset TX_FAULT Time from state RX_LOS assert
Time from non-LOS state RX_LOS deassert Timing from rising falling edge Rate Select input until receiver bandwidth conformance with appropriate specification.
Table Timing parameters management
3.15V TX_FAULT
TX_DISABLE
Transmitted Signal
t_init
FIgure Power initialization with TX_DISABLE negated
3.15V
Tx_FAULT
TX_DISABLE
Transmitted Signal
t_init
Figure Power initialization with TX_DISABLE asserted Intialization during plugging transceiver
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
3.15
TX_DISABLE Transmitted Signal t_init Insertion
TX_FAULT TX_DISABLE Transmitted Signal t_off t_on
FIgure TX_DISABLE timing during normal operation.
TX_FAULT
Figure Example initialization during plugging with TX_DISABLE negated.
Occurence safety fault TX_FAULT
TX_DISABLE
Transmitted Signal
t_fault
FIgure Detection transmitter safety fault condition
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
Occurence safety fault TX_FAULT
1084.02
TX_DISABLE Transmitted Signal t_reset t_init
Figure Successful recovery from transient safety fault condition
Occurence safety fault TX_FAULT
TX_DISABLE
Transmitted Signal
t_fault
t_reset
t_init
Figure Unsuccessful recovery from safety fault condition
Occurence loss
t_loss_on
t_loss_off
Figure Timing detection
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
SERIAL IDENTIFICATION:
having module definition provides access sophisticated identification information that describes SFP's capabilities, standard interfaces, manufacturer other information. serial interface uses 2-wire serial CMOS E2PROM protocol defined ATMEL AT24C01A/02/04 family components. memories organized series 8-bit data words that addressed individually sequentially.
CC_BASE CC_EXT
Table 3.1: Serial Data Fields
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
IDENTIFIER
identifier value specifies physical device described serial information. This value shall included serial data. defined identifier values shown table 3.2.
Value
escription physical device
Unknown unspeci GBIC
CONNECTOR
connector value indicates external connector provided interface. This value shall included serial data. defined connector values shown table 3.3. Note that 01h-05h compatible, included compatibility with GBIC standards.
Value
ENCODING
encoding value indicates serial encoding mechanism that nominal design target particular GBIC. value shall contained serial data. defined encoding values shown table
1084.02
Module/connector soldered motherboard transcei Reserved 04-7Fh 80-FFh Vendor speci
Table 3.2: Identifier Values
escription connector
Unknown unspeci
hannel Style copper connector
hannel Style copper connector /TNC
hannel oaxi headers
Jack
MT-RJ
Opti gtai Reserved
-1Fh
HSSD
opper gtai Reserved
22-7Fh
80-FFh
Vendor speci
Table 3.3: Connector Values
Value
Description encoding mechanism
Unspecified
05h-FFh
Manchester Reserved
Table 3.5: Encoding Codes
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
TRANSCEIVER
following significant indicators define electronic optical interfaces that supported SFP. least shall this field. Fibre Channel SFPs, Fibre Channel speed, transmission media, transmitter technology, distance capability shall indicated. defined transceiver codes shown table
Reserved Standard Compliance Codes Reserved Reserved SONET Compliance Codes Reserved OC-48, long reach OC-48, intermediate reach OC-48, short reach Reserved OC-12, single mode long reach OC-12, single mode intermediate reach OC-12, multi-mode short reach
Data Addr
(Note
Description transceiver
Data Addr
(Note
Description transceiver
Fibre Channel link length Very Long Distance Short distance
Intermediate distance Long distance
Fibre Channel transmitter technology Reserved
Longwave laser (LC)
Electrical inter-enclosure (EL) Electrical intra-enclosure (EL)
Shortwave laser (SN) Shortwave laser (SL) Longwave laser (LL) Reserved
Reserved
OC-3, single mode long reach
OC-3, single mode intermediate reach OC-3, multi-mode short reach
Fibre Channel Transmission Media Twin axial pair (TW)
Shielded twisted pair (TP) Miniature coax (MI) Video coax (TV)
Gigabit Ethernet Compliance Codes
Reserved
Multi-mode, 62.5µ (M6) Multi-mode, (M5) Reserved
1000BASE-T
1000BASE-CX 1000BASE-LX
Single mode (SM)
1000BASE-SX
Fibre Channel speed
Reserved
MBytes/Sec Reserved
MBytes/Sec Reserved MBytes/Sec
Table 3.4: Transceiver Codes Note high order transmitted first each byte.
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
nominal:
nominal rate (BR, nominal) specified units 100Megabits second, rounded nearest 100Megabits second. rate includes those bits necessary encode delimit signal well those bits carrying data information. value indicates that rate specified must determined from transceiver technology. actual information transfer rate will depend encoding data, defined encoding value.
Addition EEPROM data from original GBIC definition.This value specifies link length that supported while operating compliance with applicable standards using single mode fiber. value units kilometers. value means that supports link length greater than value zero means that does support single mode fiber that length information must determined from transceiver technology.
Length (9µm)
This value specifies link length that supported while operating compliance with applicable standards using single mode fiber. value units meters. value means that supports link length greater than 25.4 value zero means that does support single mode fiber that length information must determined from transceiver technology.
Length (50µm)
This value specifies link length that supported while operating compliance with applicable standards using micron multimode fiber. value units meters. value means that supports link length greater than 2.54 value zero means that does support 50µm multimode fiber that length information must determined from transceiver technology.
Length (62.5µm)
value specifies link length that supported while operation compliance with applicable standards using 62.5 micron multi-mode fiber. value units meters. value means that supports link length greater than 2.54km. value zero means that does support 62.5 micron multi-mode fiber that length information must determined from transceiver technology. common SFPs support both 50µm 62.5µm fiber.
Length (Copper)
This value specifies minimum link length that supported while operating compliance with applicable standards using single mode fiber. value units meters. value means that supports link length greater than meters. value zero means that does support copper cables that length information must determined from transceiver technology. Further information about cable design, equalization, connectors usually required guarantee meeting particular length requirement.
Vendor name
vendor name character field that contains ASCII characters, left-aligned padded right with ASCII spaces (20h). vendor name shall full name corporation, commonly accepted abbreviation name corporation, SCSI company code corporation, stock exchange code corporation. least vendor name vendor fields shall contain valid serial data.
Vendor
vendor organizationally unique identifier field vendor 3-byte field that contains IEEE Company Identifier vendor. value zero 3-byte field indicates that Vendor unspecified.
Vendor
vendor part number (vendor 16-byte field that contains ASCII characters, left-aligned padded right with ASCII spaces (20h), defining vendor part number product name. value zero 16-byte field indicates that vendor unspecified.
Vendor
vendor revision number (vendor rev) 4-byte field that contains ASCII characters, left-aligned padded right with ASCII spaces (20h), defining vendor's product revision number. value zero 4-byte field indicates that vendor unspecified.
1084.02
Length (9µm)-km
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
CC_BASE
check code byte code that used verify that first bytes serial information valid. check code shall order bits contents bytes from byte inclusive
OPTIONS
Data address
bits option field shall specify options implemented described table D.6.
Description option
Reserved Reserved
RATE_SELECT implemented then active control rate select required change rates. set, control required. cases, compliance with multiple rate standards should determined Transceiver Codes Bytes 4,5,6, (See table 3.4) TX_DISABLE implemented disables serial output.
TX_FAULT signal implemented. (Reset defined section III)
Loss signal implemented, signal inverted from definition 3.3. NOTE: This standard behavior should avoided, since noninteroperable behavior results.
Loss signal implemented, signal defined Table
Reserved
Table 3.6: Option values
upper rate limit which will still meet specifications (BR, max) specified units above nominal rate. value zero indicates that this field specified.
lower rate limit which will still meet specifications (BR, min) specified units below nominal rate. value zero indicates that this field specified.
Vendor
vendor serial number (vendor character field that contains ASCII characters, left-aligned padded right with ASCII spaces (20h), defining vendor's serial number SFP. value zero 16-byte field indicates that vendor unspecified. date code 8-byte field that contains vendor's date code ASCII characters. date code mandatory. date code shall format specified table D.7.
Date Code
Data Address 84-85 86-87 88-89 90-91
Description field
ASCII code, order digits year. 2000). ASCII code, digits month through ASCII code, month (01-31) ASCII code, vendor specific code, blank
Table 3.7: Date Code
1084.02
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
MECHANICAL DIMENSIONS inches
PANEL CUTOUT DIMENSIONS (Inches)
1084.02
Click here mechanical drawings Cage, Connector, plug
PRELIMINARY
SPLC-20-8-X-SL Optical Fibre Channel +3.3V Small Form Factor Pluggable (SFP) 2.125GBaud
Optoelectronic Products 7444 West Wilson Avenue Chicago, 60656 (708) 867-9600 (800) 323-6858 Fax: (708) 867-0996 http://www.stratoslightwave.com
IMPORTANT NOTICE 1084.02
Stratos Lightwave reserves right make changes discontinue optical link product service identified this publication, without notice, order improve design and/or performance. Stratos Lightwave advises customers obtain latest version publications verify, before placing orders, that information being relied current. Stratos Lightwave products covered under U.S. Patent Numbers 5,546,281, 5,717,533, 5,879,173, 5,812,582. Stratos Lightwave warrants performance optical link products current specifications accordance with Stratos Lightwave standard warranty. Testing other quality control techniques utilized extent that Stratos Lightwave determined necessary support this warranty. Specific testing parameters each optical link product necessarily performed optical link products. Stratos Lightwave products designed life support appliances, devices, systems where malfunction Stratos Lightwave product reasonably expected result personal injury. Stratos Lightwave customers using selling optical link products such applications their risk agree fully indemnify Stratos Lightwave damages resulting from such improper sale. Stratos Lightwave assumes liability Stratos Lightwave applications assistance, customer product design, software performance, infringement patents services described herein. does Stratos Lightwave warrant represent that license, either expressed implied granted under patent right, copyright, intellectual property right makes representations warranties that these products free from patent, copyright, intellectual property rights. Applications that described herein optical link products illustrative purposes only. Stratos Lightwave makes representation warranty that such applications will suitable specified without further testing modification.
PRELIMINARY

ORDERING INFORMATION SPLC +3.3V POWER SUPPLY SERIAL IDENTIFICATIO

Top Searches for this datasheet

Other recent searches