No.P61E5.pdf 98.6.22 CERAMIC FILTER (CERAFIL®) Receivers SFE

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

No.P61E5.pdf 98.6.22 CERAMIC FILTER (CERAFIL®) Receivers SFE

Datasheet Thumbnail

Top Searches for this datasheet

This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CERAMIC FILTER (CERAFIL®) Receivers
SFE10.7/SFT10.7/CDA10.7 Series
CERAMIC FILTER (CERAFIL®)
Murata Manufacturing Co., Ltd.
Cat.No.P61E-
This file catalog No.P61E-5. No.P61E5.pdf 98.6.22
!Index
!Introduction !For Receiver SFE10.7 Series !For Receiver Chip Type SFECV10.7 Series !Wide Bandwidth Narrow Bandwidth Type SFE10.7 Series !Low Loss Type Series !Low Profile Type Series !3-element Type SFT10.7 Series !For Stereo Tuners SFE10.7 Series 11Y12 !For Detection CDA10.7 Series 13Y15 !For Detection Chip Type CDACV10.7 Series 16Y18 !Example applied circuit 19Y20
!ISO9000 CERTIFICATIONS
Manufacturing plants these products this catalog have obtained ISO9002 quality system certificate.
Plants Himi Murata Manufacturing Co., Ltd. Taiwan Murata Electronics Co., Ltd. Certified Date Jul. 1992 Nov. 1993 Organization
Registration RCJ-86M-07 5E8Y001-00
BCIQ
Reliability Center Electronic Components Japan BCIQ Bureau Commodity Inspection Quarantine
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
Introduction
FM-broadcasting generally high fidelity high ratio. Europe North America, there particularly large number FM-broadcasting stations. performance FM-receivers therefore, greatly dependent characteristics intermediate frequency filter (selectivity, waveform symmetry, group delay time, etc.). Murata's ceramic filter 10.7/SFT 10.7 Series FMreceivers monolithic type ceramic filters which energy trapped thickness vibration-mode piezoelectric ceramic. Ceramic filters compact simple structure, with high selectivity, excellent temperature environmental characteristics, favorable waveform symmetry. Because these excellent features, Murata's ceramic filter stable receiving performance. recent years, FM-receiver technology progressed rapidly; tuners have replaced mechanical tuners. have progressively been given higher selectivity better functions car-radio receivers. fidelity characteristics have rapidly improved home audio equipment.
non-adjustment have been developed. profile because many chip components used headphone audio). insertion technology taped components progressed. Various types ceramic filters receivers (SFE 10.7/SFT 10.7 series) available meet needs divers types receivers.
!NOTICE
condition should evaluated perform stable electrical characteristics which specified filter with over coat,conditions,such material resin cure temperature evaluated well. coating filter acceptable unsealed construction. might damaged when excess stress will applied. warrant against defects caused filter which deviates from intended described this catalog. Please contact other characteristics, using conditions application device which need extremely reliable.
!Part Numbering(*Please specify part numbers when ordering.)
(Ex.)
10.7M
yRank Center Frequency Code 25kHz Step 30kHz Step 10.650MHzT25kHz 10.64MHzT30kHz 10.675MHzT25kHz 10.67MHzT30kHz 10.700MHzT25kHz 10.70MHzT30kHz 10.725MHzT25kHz 10.73MHzT30kHz 10.750MHzT25kHz 10.76MHzT30kHz Combination Combination
qApplication, Function. wAppearance, Shape, Dimensions section filter wafer section filter wafer eCenter Frequency "M"is added when unit MHz. ex.) 10.7MHz 10.7 rRating, Characteristics. (Customers Specifications) tTolerance Center Frequency T30kHZ T25kHZ T20kHZ Code
center-frequency series available 30kHz step 25kHz step. 25kHz series designated letter part number. SFE10.7MS3H-A frequency series T20kHz step available synthesizer tuners. These designated letter part number. SFE10.7MS3K-A
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Receiver SFE10.7 Series
!FEATURES
These miniature filters have high mechanical strength. loss, favorable waveform symmetry, high selectivity Various band widths available applications wide narrow bands. Small dispersion stable characteristics. Change center frequency typically within T30ppm/D W80D. High reliability.
MA5-A MS2-A MS3-A
!DIMENSIONS
7.0T2.0
1.38T0.2 1.7T0.1 0.5T0.1 0.3T0.1
3.0T1.0
T0.2 T0.2
5.0T1.0
7.0T2.0
E10.7
!MEASURING CIRCUIT
Voltmeter qInput wGround eOutput
RgWR1=R2=330 C2=10pF (Including stray capacitance capacitance voltmeter)
!SPECIFICATIONS
Part Number SFE10.7MA5-Z SFE10.7MS2-Z SFE10.7MS3-Z
matching impedance
Band Width (kHz) 280T50 230T50 180T40
20dB Band width (kHz) max. (520) (420) (380)
Insertion Loss (dB) (4.5)
Spurious Attenuation (9-12MHz) (dB) min. (43) (45) (45)
)Typ.value
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
!FREQUENCY CHARCTERISTICS
SFE10.7MA5-A
Group Delay Time (µsec.) Attenuation (dB) 10.5 10.6 10.7 10.8 10.9 Attenuation (dB) 10.5 10.6 10.7 10.8 10.9
SFE10.7MS2-A
Group Delay Time (µsec.) Attenuation (dB)
SFE10.7MS3-A
10.5 10.6 10.7 10.8 10.9 Group Delay Time (µsec.)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
SFE10.7MA5-A
Attenuation (dB) 10.2 10.7 11.2 Frequency (MHz) Attenuation (dB)
SFE10.7MS2-A
10.2 10.7 11.2 Frequency (MHz)
SFE10.7MS3-A
Attenuation (dB) Attenuation (dB) 10.7 11.7 Frequency (MHz) 12.7 12.7 10.2 10.7 11.2 Frequency (MHz)
SFE10.7MA5-A
Attenuation (dB) 10.7 11.7 Frequency (MHz) 12.7 Attenuation (dB)
SFE10.7MS2-A
SFE10.7MS3-A
10.7 11.7 Frequency (MHz)
!SPURIOUS RESPONSE
SFE10.7MA5-A
Attenuation (dB) Frequency (MHz)
!TEMPERATURE CHARACTERISTICS
SFE10.7MS2-A
Variation (kHz) Variation (kHz) Variation (kHz) Temperature Temperature Temperature
SFE10.7MS3-A
Variation (kHz) Variation (kHz) Variation (kHz) Temperature Temperature Temperature
Center frequency
Center frequency
Insertion loss
Insertion loss
Band width
Band width
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
!MATCHING CONDITIONS
using ceramic filters, most important match input/output load impedance (pure resistance). Waveform symmetry damaged when reactance added input/output load. ceramic filters directly connected used high selectivity. reducing waveform variation, recommended input buffer between ceramic filters. 10.7 10.7 series input/output symmetric structure that theory there input/output directionality. Actual circuits different input/output loading conditions (for example, mismatched impedance) capacitance load. such cases, waveform will little changed direction input/output ceramic filters.
Load resistance waveform SFE10.7MS2-A 330)
Group Delay Time (µsec.) Attenuation (dB) 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Attenuation (dB) 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9
Group Delay Time (µsec.) Group Delay Time (µsec.) Group Delay Time (µsec.) Group Delay Time (µsec.)
10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Group Delay Time (µsec.) Attenuation (dB) Attenuation (dB) 10.5
10.6 10.7 10.8 Frequency (MHz) 10.9
Loaded capacitance waveform SFE10.7MS2-A 330)
10pF
Group Delay Time (µsec.) Attenuation (dB) 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Attenuation (dB) 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9
33pF
56pF
Group Delay Time (µsec.) Attenuation (dB) 10.5 10.6 10.7 10.8 Frequency (MHz) 10.9 Attenuation (dB) 10.5
82pF
10.6 10.7 10.8 Frequency (MHz) 10.9
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Chip Ceramic Filter SFECV10.7 Series
Contributing Reduction AM/FM Circuit
chip CERAFIL® SFECV series high performance filter compare conventional series (SFECA). Together with PFWCC455 filter series SFECV10.7 filter series reduces size circuit AM/FM radios.
!FEATURES
Super-thin. Only 1.5mm. most suitable ceramic filter available thinning substrates. Heat resistant. Reflow soldering performed because excellent heat resistance. piezoelectric element connected sandwich shape heat heat resistant substrates, thus excellent mechanical strength, suitable automatic mounting. Various band-widths available. Select suitable type accordance with desired selectivity. Electrical characteristics same conventional Cerafil
!APPLICATIONS
Small, thin radios Headphone stereos radios
!DIMENSIONS
!FREQUENCY CHARACTERISTICS
SFECV10.7MA5-A
Attenuation (dB) 1.5T0.2 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 2.9T0.3 1.2T0.5
6.9T0.3 4.05T0.4 1.2T0.3 1.2T0.5 1.2T0.3
Input/Output Ground EIAJ Monthly Code Rank 1.0T0.5 1.0T0.5 1.0T0.5
SFECV10.7MS2-A
Attenuation (dB)
0.3T0.05 7.3T0.1 5.5T0.05 1.5W0.1 Y0.0 2.0T0.05 4.0T0.1
!DIMENSIONS PLASTICS TAPE
W0.08 Y0.2
W0.1
4.0T0.3
3.3T0.1 3°max.
Frequency (MHz)
Cover Tapes
User direction feel
Packaging Quantity 2000 reel (180mm)
1.9T0.1
9.700
10.700
11.700
12.700
1.7Y0.05
8.700
Peeling strength 0.1Y0.7N
Chip Filter
0.05
12.0
12.0
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
!SPECIFICATIONS
Part Number Char. SFECV10.7MA5-Z SFECV10.7MS2-Z SFECV10.7MS3-Z SFECV10.7MJ-Z 10.700MHzT30kHz max. 10.670MHzT30kHz max. 10.640MHzT30kHz max. 10.730MHzT30kHz max. 10.760MHzT30kHz max. Provided that center point band width should center frequency identified letters 280T50kHz 590kHz max. 3.0T2.0dB 35dB 230T50kHz 510kHz max. 3.5T2.0dB 35dB min. 180T40kHz 470kHz max. 4.0T2.0dB 35dB min. 150T40kHz 380kHz max. 5.5T2.0dB 35dB min.
Center Frequency(f0)
Pass Band Width 20dB Attenuation Band Width Insertion Loss Spurious Attenuation (9-12 MHz) Input/Output Matching Impedance
!APPLICATIONS
Standard Land Dimensions
SFECV10.7
Cleaning conditions Please avoid cleaning this chip ceramic filter with vapor immersion because this type perfectly shielded.
1.65 2.85
1.65 2.85
Soldering Conditions soldering conditions
Reflow Solder
5sec.
Temperature
Gradual cooling
Time(sec.)
with iron Soldering conditions Soldering iron temperature 300D Soldering time less than seconds.
Note Please solder this chip ceramic filter that soldering iron should touch chip body directly.
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Wider/Narrow Band-width Type SFE10.7 Series
!FEATURES
Realizes wider narrower band characteristics obtained conventional ceramic filters. Temperature characteristics best available, same those Murata's conventional ceramic filters. Thus, even case narrow band filters, center frequency stable even temperature changes.
MA19 MA20-A MHY-A
!DIMENSIONS
MA19/MA20-A/MHY-A
7.0T2.0
MT/MV
7.0T2.0
7.0T2.0
1.38T0.2 1.7T0.1 0.5T0.1 0.3T0.1
1.38T0.2 1.7T0.1 0.5T0.1 0.3T0.1
5.0T1.0
3.0T1.0
3.0T1.0
T0.2 T0.2
T0.2 T0.2
5.0T1.0
7.0T2.0
E10.7
E10.7
!SPECIFICATIONS
Part Number SFE10.7MA19 SFE10.7MA20-A SFE10.7MHY-A SFE10.7MT SFE10.7MV Band Width (kHz) min. (450) 330T50 110T30 T25kHz min. (82) T13kHz min. (56) 20dB Band Width (kHz) max. max. (750) max. (615) max. (260) max. (160) max. (110) Insertion Loss (dB) 6.5T2.5 Spurious Attenuation (9Y12MHz) (dB) min. (30) min. (40) min. (42) min. (48) min. (41)
)Typ.value
matching impedance (MA20-A, MHY-A, MV), (MA19)
!FREQUENCY CHARACTERISTICS
SFE10.7MA19
Attenuation (dB) Attenuation (dB) 10.2 10.7 11.2 Frequency (MHz) 10.2 10.7 11.2 Frequency (MHz) Attenuation (dB)
SFE10.7MHY-A
SFE10.7MV
10.2 10.7 11.2 Frequency (MHz)
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Loss Type SFE10.7-A10 Series
!FEATURES
1.Insertion loss 1Y1.5dB lower than conventional products. This types useful elevating sensitivity sets. Excellent shape factor frequency response. Good wareform symmetry.
!SPECIFICATIONS
Band Width 20dB Band Width Insertion Loss Part Number (kHz) (kHz) max. (dB) SFE10.7MA5A10-Z SFE10.7MS2A10-Z SFE10.7MS3A10-Z SFE10.7MJA10-Z 280T50 230T50 180T40 150T30 (480) (400) (360) (290) 2.5T2.0 3.0T2.0 3.5T1.5 4.0T2.0
Spurious Attenuation (9Y12MHz) (dB) min. (42) (43) (43) (44)
)Typ.value
MA5A10-A
MS2A10-A
MS3A10-A
MJA10-A
!DIMENSIONS
7.0T2.0
matching impedance
1.38T0.2 1.7T0.1 0.5T0.1 0.3T0.1
T0.2 T0.2
3.0T1.0
5.0T1.0
7.0T2.0
10.7
!FREQUENCY CHARACTERISTICS
SFE10.7MS3A10-A
Group Delay Time (µsec.)
10.5 10.6 10.7 10.8 10.9 10.5 10.6 10.7 10.8 10.9
SFE10.7MJA10-A
Frequency (MHz)
Frequency (MHz)
SFE10.7MS3A10-A
SFE10.7MJA10-A
Attenuation (dB)
10.2 10.7 11.2
Attenuation (dB)
10.2 10.7 11.2
Frequency (MHz)
Frequency (MHz)
Group Delay Time (µsec.)
Attenuation (dB)
Attenuation (dB)
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Profile Type SFE10.7-C10 Series
!FEATURES
Installed height making well suited compact, thin sets. Electrical characteristics performance same those ceramic filter 10.7 series.
!SPECIFICATIONS
Part Number SFE10.7MA5C10-Z SFE10.7MS2C10-Z SFE10.7MS3C10-Z Band Width 20dB Band Width Insertion Loss (kHz) (kHz) max. (dB) 280T50 230T50 180T40 (546) (474) (360) 3.0T2.0 3.0T2.0 3.5T2.0
Spurious Attenuation (9Y12MHz) (dB) min. (47) (48) (45)
MA5C10-A
MS2C10-A
MS3C10-A
!DIMENSIONS
7.0T2.0
matching impedance
)Typ.value
10.7
max. 3.0T1.0 5.0T1.0 2.5T0.2 2.5T0.2
1.3T0.1
0.3T0.1
!FREQUENCY CHARACTERISTICS
SFE10.7MA5C10-A
Group Delay Time (µsec.)
10.5 10.6 10.7 10.8 10.9 10.5 10.6 10.7 10.8 10.9
SFE10.7MS2C10-A
Group Delay Time (µsec.)
10.5
SFE10.7MS3C10-A
10.6 10.7 10.8 10.9
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
SFE10.7MA5C10-A
10.2
SFE10.7MS2C10-A
SFE10.7MS3C10-A
Attenuation (dB)
Attenuation (dB)
10.7
11.2
10.2
Attenuation (dB)
10.7
11.2
10.2
10.7
11.2
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Group Delay Time (µsec.)
Attenuation (dB)
Attenuation (dB)
Attenuation (dB)
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
3-element Type SFT10.7 Series
!FEATURES
excellent shape factor, possible obtain times more excellent selectivity than 10.7 series(by detuningT300 400kHz). Good performance spurious suppression. Having same terminal pitch 10.7 series, easily replaces that series. replacing 10.7 series filters with 10.7 filter,more compact sets made. Well-suited 1-chip ICs.
MA5-A
MS2-A
MS3-A
!SPECIFICATIONS
Spurious Attenuation Band Width 40dB Band Width Insertion Loss Part Number (9Y12MHz) (kHz) (kHz) max. (dB) (dB) min. SFT10.7MA5-Z 280T50 (630) (60) SFT10.7MS2-Z SFT10.7MS3-Z 230T40 180T40 (580) (500)
!DIMENSIONS
10.0T1.0
(60) (60)
)Typ.value
0.4T0.1 0.65T0.1 1.4T0.1 0.5T0.1 0.3T0.1
T10.7
matching impedance series good replace with series because higher selectivity.
2.5T0.2
2.5T0.2 3.0T1.0
5.0T1.0
6.0T1.0
!FREQUENCY CHARACTERISTICS
SFT10.7MS2-A
Group Delay Time (µsec.) Attenuation (dB) 10.5 10.6 10.7 10.8 10.9 Attenuation (dB) 10.5 10.6 10.7 10.8 10.9
SFT10.7MS3-A
Group Delay Time (µsec.) Attenuation (dB) 10.2
SFT10.7MS2-A
Group Delay Time (µsec.) 10.4 10.6 10.8 11.0 Frequency (MHz) 11.2 Attenuation (dB) 10.2
SFT10.7MS3-A
10.4 10.6 10.8 11.0 11.2 Group Delay Time (µsec.)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
SFT10.7MS2-A
Attenuation (dB) Attenuation (dB) 10.7 11.7 Frequency (MHz) 12.7
SFT10.7MS3-A
SFT10.7MS2-A Spurious Response
Attenuation (dB)
10.7 11.7 Frequency (MHz) 12.7
10.7 11.7 Frequency (MHz)
12.7
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Stereo Tuners Waveform Control Product) SFE10.7 Series
Series
Series
Series
MX-A
MX2-A
MZ1-A
MZ2-A
ML-A
MP3-A
MM-A
MA8-A
MS2G-A
MS3G-A
!FEATURES
Little dispersion amplitude characteristics phase characteristics(G. characteristics) 10.7 series G.D.T characteristics useful obtaining distortion. 10.7 series, these ceramic filters, being harmony with flatness G.D.T., roundness amplitude selectivity characteristics, therefore, these ceramic filters suitable high-grade stereo tuners. Even mismatching condition, they keep little distortion because ceramic material. 10.7 series based 10.7 MA5/MS2 /MS3, obtains high selectivity with loss. There little dispersion amplitude G.D.T. characteristics, distortion rate obtained. products inspected symmetry roundness amplitude characteristics, flatness G.D.T. characteristics.
!DIMENSIONS
SFE10.7MX Series
max.
SFE10.7ML/MA8 Series
7.0T2.0
11.0 max.
1.38T0.2 1.7T0.1 0.5T0.1 0.3T0.1
1.38T0.2 1.7T0.1 0.5T0.1 0.3T0.1
5.0T1.0
max.
T0.2 T0.2
3.0T1.0
T0.2 T0.2
5.0T1.0
7.0T2.0
E10.7
E10.7
!SPECIFICATIONS
Char. Part Number SFE10.7MX-Z Series SFE10.7MX2-Z SFE10.7MZ1-Z SFE10.7MZ2-Z SFE10.7ML-Z Series SFE10.7MP3-Z SFE10.7MM-Z SFE10.7MA8-Z Series SFE10.7MS2G-Z SFE10.7MS3G-Z Band Width (kHz) 250T40 220T40 180T30 150T30 280T50 250T50 230T50 280T50 230T50 180T40 20dB Band Width (kHz) max. (620) (560) (460) (420) (610) (550) (510) (520) (420) (380) Insertion Loss (dB) max. (10) 12.5 (10.5) (12.3) (12.6) (4.5) Spurious Attenuation. min. (33) (37) (38) (41) (33) (35) (38) (43) (45) (45) Band Width (kHz) min.
Deviation 0.2µ sec. max. (Within T110kHz) Deviation 0.15µ sec. max. (Within T80kHz) Deviation 0.15µ sec. max. (Within T60kHz) Deviation 0.15µ sec. max. (Within T50kHz) 0.25µsec. f0T70 (T105) 0.25µsec. f0T65 (T90) 0.25µsec. f0T60 (T85) 0.5µsec. f0T80 (T100) 0.5µsec. f0T60 (T75) 0.5µsec. f0T45 (T60)
matching impedance
)Typ.value
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
Stereo Tuners Waveform Control Product) SFE10.7 Series
!FREQUENCY CHARACTERISTICS
series SFE10.7MX-A
SFE10.7MX2-A
Group Delay Time (µsec.) Group Delay Time (µsec.) Group Delay Time (µsec.)
Attenuation (dB)
Attenuation (dB)
10.5
10.6
10.7
10.8
10.9
10.5
10.6
10.7
10.8
10.9
Frequency (MHz)
Frequency (MHz)
SFE10.7MZ1-A
Group Delay Time (µsec.)
SFE10.7MZ2-A
Attenuation (dB)
Attenuation (dB)
10.5
10.6
10.7
10.8
10.9
10.5
10.6
10.7
10.8
10.9
Frequency (MHz)
Frequency (MHz)
series SFE10.7ML-A
SFE10.7MP3-A
SFE10.7MM-A
Group Delay Time (µsec.) Group Delay Time (µsec.) Group Delay Time (µsec.)
Group Delay Time (µsec.)
Attenuation (dB)
Attenuation (dB)
Attenuation (dB)
10.5 10.6 10.7 10.8 10.9
10.5 10.6 10.7 10.8 10.9
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
series SFE10.7MA8-A
SFE10.7MS2G-A
SFE10.7MS3G-A
Group Delay Time (µsec.)
Group Delay Time (µsec.)
Attenuation (dB)
Attenuation (dB)
Attenuation (dB)
10.5 10.6 10.7 10.8 10.9
10.5 10.6 10.7 10.8 10.9
10.5 10.6 10.7 10.8 10.9
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CERAMIC DISCRIMINATOR
Ceramic Discriminator CDA10.7 Series Detection
Well-suited Miniaturization without Adjustment
conformity with trends higher performance audio devices, demand grown non-adjustment, single chip ICs. Murata's ceramic discriminator CDA10.7 series forms resonator piezoelectric ceramic substrate. combination with ICs, this type obtains stable demodulation characteristics wide bandwidths.
!FEATURES
Compact excellent mechanical strength. combined with various ICs. determined last number part number. Stable demodulation characteristics obtained without adjustment. type wide bandwidths type narrow bandwidths available. Stable temperature characteristics. recommend kits ceramic discriminator CDA10.7 series Cerafil® SFE10.7 same frequency rank.
MC1-A
MG1-A
!DIMENSIONS
8.0T1.0
10.7
0.65T0.1 0.5T0.1 0.3T0.1 5.0T0.2
3.0T1.0
5.0T1.0
0.4T0.1
5.0T1.0
!SPECIFICATIONS
Part Number Demodulation Output (mV) min. 60Y90 min. min. min. Distortion Factor max. (0.1) (0.5) (0.2) (0.2) Demodulation Band width (kHz) min. (500) (370) (560) (370) Detection System Quadrature Quadrature Quadrature Quadrature CX20029 CX20111 TA8122AN/AF LA1835 CXA1019M CX20091
Input signal conditions CDA10.7MG1-Z Input Level CDA10.7MG16-Z Input Level CDA10.7MG48-Z Input Level CDA10.7MC1-Z Input Level frequency rank (Red) 10.70MHzT30kHz (Blue) 10.67MHzT30kHz (Orange) 10.73MHzT30kHz (Black) 10.64MHzT30kHz (White) 10.76MHzT30kHz A.B.C.D.E ranks mixed. 100dBµ 180dBµ 112dBµ 100dBµ Mod.Freq.1400Hz Mod.Freq.1000Hz Mod.Freq.1000Hz Mod.Freq.1400Hz Freq.Dev. T22.5kHz Freq.Dev. T22.5kHz Freq.Dev. T.575kHz Freq.Dev. T22.5kHz )Typ.value
CDA10.7MG1-Z CDA10.7MG16-Z CDA10.7MG48-Z CDA10.7MC1-Z
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CERAMIC DISCRIMINATOR
Ceramic Discriminator CDA10.7 Series Detection
!FREQUENCY CHARACTERISTICS
TEST CIRCUIT CDA10.7MG1-Z
(ref.) 0.47µ CDA10.7MG1-Z
CDA10.7MG1-A
Demodulation Output (mV) Demodulation Output
1000p
2.2K 0.01µ FMIF Input 0.01µ
CX20029 (SONY)
35343332313029
Distorsion Rate
S.S.G. Rg=50
V(AFC)
VCCW3V Output
Input signal conditions Input Level 100dBµ Mod.Freq. 400Hz Freq.Dev. T22.5kHz
4.7µ 100K 300K
100µ 3.3K 3.3K 3.3K
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz)
TEST CIRCUIT CDA10.7MG16-Z
VCC=3V 330p 2.5µ
CDA10.7MG16-A
Demodulation Output (mV) Demodulation Output
0.1µ
Distorsion Rate Distorsion Rate Distorsion Rate
0.033µ
TA8122AN
Distorsion Rate
0.022µ
CDA10.7MG16-Z
0.022µ
SFE10.7MA19-Z
Input signal conditions Input Level 80dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz)
TEST CIRCUIT CDA10.7MG48-Z
1500p 3.3µ
CDA10.7MG48-A
CSB456F
Demodulation Output (mV)
Demodulation Output
LA1835 (SANYO)
Distorsion Rate
0.047µ 0.047µ
IF-IN
0.47µ
REG.
CDA10.7MG48-Z (7V)
Input signal conditions Input Level 112dBµ Mod.Freq. 1000Hz Freq.Dev. T75kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz)
TEST CIRCUIT CDA10.7MC1-Z
VCC=5V Output 0.01µ
CDA10.7MC1-A
S.S.G Rg=50 100µ 4.7µ 0.01µ 0.1µ
Demodulation Output
Demodulation Output (mV)
Distorsion Rate
1019M(SONY)
CDA10.7MC1-Z
Ref.
Input signal conditions Input Level 100dBµ Mod.Freq. 400Hz Freq.Dev. T22.5kHz
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz)
Distorsion Rate
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CERAMIC DISCRIMINATOR
Ceramic Discriminator CDA10.7 Series Detection
!CERAMIC DISCRIMINATOR LIST RECEIVER
CDA10.7MG Type
Part Number CDA10.7MG1-Z CDA10.7MG2-Z CDA10.7MG4-Z CDA10.7MG6-Z CDA10.7MG7-Z CDA10.7MG8-Z CDA10.7MG9-Z CDA10.7MG12-Z CDA10.7MG13-Z CDA10.7MG14A-Z CDA10.7MG15-Z CDA10.7MG16-Z CDA10.7MG17-Z CDA10.7MG18-Z CDA10.7MG19-Z CDA10.7MG20-Z CDA10.7MG21 CDA10.7MG22-Z CDA10.7MG23-Z CDA10.7MG24 CDA10.7MG25V CDA10.7MG26-Z CDA10.7MG27-Z CDA10.7MG28-Z CDA10.7MG29 CDA10.7MG30-Z CDA10.7MG31-Z CDA10.7MG32-Z CDA10.7MG33-Z CDA10.7MG34V CDA10.7MG35-Z CDA10.7MG36-Z CDA10.7MG37-Z CDA10.7MG39-Z CDA10.7MG40-Z CDA10.7MG41-Z CDA10.7MG42-Z CDA10.7MG43-Z CDA10.7MG45-Z CDA10.7MG46-Z CDA10.7MG47A CDA10.7MG48-Z CDA10.7MG49-Z CDA10.7MG50-Z Corresponding CX-20029/CX-20111 CX-831 BA4234L TA7640AP LA1260 TA7303P TA7130P CXA1030P AN7007SU AN7006S LA1816 TA8122AN TEA5591 TA8132N BA1440 NE604 TBA229-2 LA1810 LA7770 TDA2557 U829B LA1805 CXA1238 U2501B TBA120U TE5592 TA2003 CXA1343M TA2007 U4490B TEA5594 TA2029 LA1830 TA8186 TEA5710 BA4220 SA605 LA1831 TA2008 LA1832 SA626 LA1835 MC13156 TA2022 Part Number CDA10.7MG51-Z CDA10.7MG52-Z CDA10.7MG53-Z CDA10.7MG54-Z CDA10.7MG55-Z CDA10.7MG56-Z CDA10.7MG57-Z CDA10.7MG58-Z CDA10.7MG59V CDA10.7MG60-Z CDA10.7MG61-Z CDA10.7MG62-Z CDA10.7MG63-Z CDA10.7MG64-Z CDA10.7MG65-Z CDA10.7MG66-Z CDA10.7MG67-Z CDA10.7MG68-Z CDA10.7MG69-Z CDA10.7MG70-Z CDA10.7MG71-Z CDA10.7MG72 CDA10.7MG74-Z CDA10.7MG75-Z CDA10.7MG76-Z CDA10.7MG77-Z CDA10.7MG82-Z Corresponding TDA1576T MC13173 AN7232 CXA1376 TEA5712T uPC1391H TA2057 TA2046 KA2244 BA1448/1449 TEA5762 TK14581 KA2292 KA2295 KA2298 BA4110 BA4240L CXA1991N CXA1538 LA1150 TA7765AF TA31161 LA1838 CXA1611 CXA3067M TA2111 TA2099
CDA10.7MC Type
Part Number CDA10.7MC1-Z CDA10.7MC2-Z CDA10.7MC3 CDA10.7MC4A-Z CDA10.7MC5A-Z CDA10.7MC6-Z CDA10.7MC10-Z CDA10.7MC19-Z CDA10.7MC30-Z CDA10.7MC40-Z CDA10.7MC43A-Z CDA10.7MC55-Z Corresponding CXA1019M/CX-20091 A7687P/F AN7220A MC3356P LA7770 TEA5591 TEA5594 BA1440 TEA5592 TEA5710 LA1831 TEA5712T/N2
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CHIP CERAMIC DISCRIMINATOR
Chip Ceramic Discriminator CDACV10.7 Series
Chip Ceramic Discriminator Thinner Radios.
When using chip components design radios, their arrangement space allocation create design difficulties. help reduce these problems, Murata developed this series chip ceramic discriminators. CDACV series same structure chip CERAFIL® SFECV series, allow design detecting circuits requiring adjustment. Also, these discriminators have good stable demodulation characteristics. mounting area discriminators have been decreased approximately conventional models (CDAC). series will especially contribute downsizing, height reduction. CDACV10.7 series used kits with CERAFIL® SFECV10.7 series facilitate design.
!DIMENSIONS
3.4T0.5 1.5T0.3
!FEATURES
discriminator only 1.5mm thick well suited thin circuit boards. This discriminator used with variety including following examples CX-20029 (Sony) TA8122AF (Toshiba) TA2022 (Toshiba) CXA1538N (Sony) exhibits demodulation characteristics over wide frequency range without need adjustment. series excellent temperature characteristics good aging stability. series same structure chip Cerafil® SFECV10.7 series. suitable automatic mounting excellent heat resistance allows reflow soldering. This series(CDACV10.7)and chip Cerafil® SFECV10.7 series supplied with equivalent center frequency kits.
0.9T0.3
0.9T0.3
2.6T0.3 EIAJ Monthly Code Rank
!DIMENSIONS PLASTIC TAPE
W0.1 Y0.0
2.0T0.05
4.0T0.1
5.5T0.05 Y0.05 1.9T0.1
1.75T0.1 3.0T0.1 0.3T0.05
W0.1
Peeling strengh 0.1Y0.7N Cover Tape
4.0T0.1
Cavity Tape Number marked side always tacing upside.
Direction Feed
Packaging Quantity 2000 reel (180mm)
0.3T0.01
12.0T0.2
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CHIP CERAMIC DISCRIMINATOR
Chip Ceramic Discriminator CDACV10.7 Series
!SPECIFICATIONS
Part Number Demodulation Output (mV) min. Within min. min. Distortion Factor max. (0.3) (0.3) (0.2) (0.3) Demodulation Band width (kHz) min. f0T150 Detection System Quadrature Quadrature Quadrature Quadrature CXA20029 CXA20111 TA8122F TA2022 CXA1538N
*Input signal conditions CDACV10.7MG1-Z Input Level CDACV10.7MG16-Z Input Level CDACV10.7MG50-Z Input Level CDACV10.7MG69-Z Input Level 100dBµ 180dBµ 100dBµ 100dBµ Mod.Freq.1000Hz Mod.Freq.1000Hz Mod.Freq.1000Hz Mod.Freq.1000Hz Freq.Dev. T22.5kHz Freq.Dev. T22.5kHz Freq.Dev. T22.5kHz Freq.Dev. T.075kHz )Typ.value
CDACV10.7MG1-Z CDACV10.7MG16-Z CDACV10.7MG50-Z CDACV10.7MG69-Z
!APPLICATIONS
Standard Land Dimensions
CDAC10.7
Cleaning conditions Please avoid cleaning this chip ceramic discriminator using vapor immersion methods because perfectly shielded.
!NOTICE
Please avoid applying excessive stress ceramic filter because might damaged. Ceramic discriminators designed perform intended conjunction with specific ICs. Please contact appropriate part number ceramic discriminator matched with also strongly recommended evaluate ceramic discriminator after mounting your products prior series production. These ceramic discriminator designed used portable radio application. Please avoid using radio other application which require high stability over wide temperature range.
Soldering Conditions soldering conditions
Reflow Solder
5sec.
Temperature
Gradual Cooling
Time (sec.)
with iron Soldering conditions Soldering iron temperature 280D Soldering time less than seconds.
Note: allow soldering iron directly contact chip ceramic discriminator.
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
CHIP CERAMIC DISCRIMINATOR
Chip Ceramic Discriminator CDAC10.7 Series
!FREQUENCY CHARACTERISTICS
TEST CIRCUIT CDACV10.7MG1-Z
V(ref.) 0.47µ CDACV10.7MG1-Z
CDACV10.7MG1-A
1000
1000p
Recovered Output Voltage (mV)
Output
Distortion Output Distortion Distortion Distortion
2.2K 0.01µ FMIF Input 0.01µ
CX20029 (SONY)
35343332313029
Distorsion
S.S.G. Rg=50
V(AFC)
VCCW3V Output
Input signal conditions Input Level 100dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz
4.7µ 100K 1µ300K
100µ 3.3K 3.3K 3.3K
10.4 10.5 10.6 10.7 10.8 10.9 11.0 Frequency (MHz)
TEST CIRCUIT CDACV10.7MG16-Z
Vcc=3v 2.2µ
CDACV10.7MG16-A
1000
Recovered Output Voltage (mV)
0.033µ 0.1µ
330p
TA8122F
Distortion
0.022µ
CDACV10.7MG16-Z SFE10.7MA19 0.022µ
Input signal conditions Input Level 80dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz
10.5
10.6 10.7 10.8 Frequency (MHz)
10.9
TEST CIRCUIT CDACV10.7MG50-Z
Output
CDACV10.7MG50-A
1000
3300p 6800p Output
330p
4.7µ
4.3K
Recovered Output Voltage (mV)
0.01µ
Output
Distortion
3.3µ 0.01µ SFE10.7MA5 CDACV10.7MG50-Z Input (1.2V)
Input signal conditions Input Level 100dBµ Mod.Freq. 1000Hz Freq.Dev. T22.5kHz
10.5
10.6 10.7 10.8 Frequency (MHz)
10.9
TEST CIRCUIT CDACV10.7MG69-Z
CDACV10.7MG69-Z (3V)
CDACV10.7MG69-A
1000
3.3µ
Recovered Output Voltage (mV)
2.2k
0.01µ
Output
CXA1538N
0.01
Distortion
0.01µ
0.01µ
0.022µ
3.3k 0.022µ
(3V) 3.3k
Input signal conditions Input Level 100dBµ Mod.Freq. 1000Hz Freq.Dev. T75kHz
10.5
10.6 10.7 10.8 Frequency (MHz)
10.9
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
EXAMPLE APPLIED CIRCUIT
Application LA1140 (Car Radio)
0.047 SFE10.7MS3A10-A 0.022 SFE10.7MS3A10-A C.F. 150k
2.2µH
0.047
0.047
Vref.
0.047 4.7µ
FRONT
C.F. 1.8k 1.8k 0.022
0.047
220k 2.2µ
LA1135 (SANYO)
0.047Z2
0.047
Application CXA1019M (Radio)
Cerafil® (SFE10.7MA5-A)
CERAMIC DISCRIMINATOR (CDA10.7MC1-A)
FRONT
FM/AM BAND SELECT
DISCRI
METER
RIPPLE FILTER
DETECTOR
TUNING METER
REGULATOR
CXA1019M(SONY)
FRONT DETECTOR
PRE/POWER
Cerafil® (SFU455B)
adjustment needed detection stage ceramic discriminator.
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
*CERAFIL® Registered Trademark Murata's Ceramic Filters.
CERAMIC FILTER
EXAMPLE APPLIED CIRCUIT
Application TA8122AN/AF (Radio)
IS2236
100k
0.022µF
100k
456F16
330p 0.1µ 0.015µ 0.015µ 4.7µ
Vcc1
0.1µ
10µF
LPF1
LPF2
0.068µ
4.7µ
Phase
Phase
DECODER
TA8122AN(TOSHIBA)
AM/FM MONO
Freq Divider
GND1
Vcc2
GND2 0.033µ
QUAD
0.022µ
SFU455B SFE10.7MA5-AZ2
10.7MG16-A
Detection stage adjustment ceramic discriminator ceramic resonator (CERALOCK®)
10µH
(3V)
This file catalog No.P61E-5.
No.P61E5.pdf 98.6.22
Note:
Export Control customers outside Japan Murata products should used sold development, production, stockpiling utilization conventional weapons mass-destructive weapons (nuclear weapons, chemical biological weapons, missiles), other weapons. customers Japan products which controlled items subject "the Foreign Exchange Foreign Trade Control Law" Japan, export license specified required export.
Please contact sales representatives engineers before using products listed this catalog applications requiring especially high reliability what defects might directly cause damage other party's life, body property (listed below) other applications specified this catalog. Aircraft equipment Aerospace equipment Undersea equipment Medical equipment Transportation equipment (automobiles, trains, ships,etc.) Traffic signal equipment Disaster prevention crime prevention equipment Data-processing equipment Applications similar complexity with reliability requirements comparable applications listed above Product specifications this catalog 1998, subject change stop supply without notice. Please confirm specifications before ordering product. there questions, please contact sales representatives engineers. categories specifications listed this catalog information only. Please confirm detailed specifications checking product specification document requesting approval sheet product specification, before ordering. Please note that unless otherwise specified, shall assume responsibility whatsoever conflict dispute that occur connection with effect and/or third party's intellectual property rights other related rights consideration your using products and/or information described contained catalogs. this connection, representation shall made effect that third parties authorized rights mentioned above under licenses without consent. None ozone depleting substances (ODS) under Montreal Protocol used manufacturing process
Head office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone:81-75-951-9111 Marketing Group 1874 Sumiyoshi-cho Kizuki, Nakahara-ku Kawasaki, 211-0021, Japan Phone:81-44-422-5153 Fax:81-44-433-0798
Cat. R00E-0

No.P61E5.pdf 98.6.22 CERAMIC FILTER (CERAFIL®) Receivers SFE

Top Searches for this datasheet

Other recent searches