Download

PDF Abstract Text:

Issue No. A00NAD3323 Date of issue 15-Oct-02

Classification New Change Renewal

Issue No. A00NAD3323 Date of issue 15-Oct-02
Classification New Change Renewal
PRODUCT SPECIFICATION FOR INFORMATION
Product Description Product Part Number Classification of Spec Applications Term of Validity
DC / DC Converter EHD RD3323 Individual Product Spec
5 years from the date of issue.
Receipt Record # CUSTOMER USE ONLY Date of receipt This was certainly received by us. 2(Two) copy is being returned to you. Acknowledgement Section Signed
Matsushita Electronic Components Co., Ltd. High Frequency Products Division Hybrid Microcircuit Motomiya Factory
77 Ichiridan Niida Aza Motomiyamachi Adachigun Fukushima, 969-1103 JAPAN
TEL ( 0243 ) - 33 - 5111 FAX ( 0243 ) - 33 - 5159
Approval
Prepared by Engineering Section 1 Checked Checked Signed
T.Hara
S.Koga
Y.Satou
DC / DC Converter
EHD RD3323
Dimensions Unit mm
Side of marking 30.5max. 10.0max.
RD3323
lot No.
18.5max. (17.2typ.)
Pin Assignment
Forming of leads (1pin , 10pin)
Item Material of leads Colar Material of resin Appearance Marking Remarks
Description 0.5 Fe lead with Cu, solder plating Black Phenol denatured epoxy resin (UL94V-0) Without noticeable flaw and stain Silver White mark side is Pin No.1 Pin No.9 is removed Pin No.1, 10 are leads bending formed
National / Panasonic
DC / DC Converter
EHD RD3323
Absolute Maximum Ratings
No. Item Symbol Vin Topr Tstg -25 -25 Rating 170 to to +85 +105 Unit VDC degC cf.Delayting Curve degC Remarks
1 Input Voltage 2 Operating Temperature 3 Storage Temperature
Electrical Characteristics
Symbol Vin Vout Iout Vr Vl Vp
Characteristics Min. Typ. Max.
Unit VDC
Conditions
1 Input Voltage 2 Output Voltage 3 Output Current 4 Line Regulation 5 Load Regulation 6 Ripple Voltage 7 Efficiency
1 Refer to Delayting Curve Ta-Io 2 Spike voltage does not include Ripple Voltage.
Recommendable Test Circuit EHD RD3323
IN NC NC NC GND NC NC NC OUT
Vout + Vin 33u F / 200V + 100u F / 25V
We should recommend Low Impeadance capacitor for output capacitor. (For example : FC series electrolytic Capacitor , Matsusita Electric Components Co.Ltd.)
National / Panasonic
DC / DC Converter
EHD RD3323
Application
EHD RD3323
IN NC NC NC GND NC NC NC OUT
Vout + + 33u F / 200V 100u F / 25V
AC100V
We should recommend Low Impeadance capacitor for output capacitor. (For example : FC series electrolytic Capacitor , Matsusita Electric Components Co.Ltd.)
Delayting Curve
Delayting Curve (Ta-Io)
Output Current mA
Ta degC
National / Panasonic
Quarity Characteristics Item
Lead Pull Strength
DC / DC Converter
Test Condition
Direction Load Time Axial Direction 4.9N500g 5 5s aba aba 1time
Specifications No any removal or disconnection.
Tension
MIL-STD-202D211A
Bending Equal to MIL-STD-202D Stress -211A
Direction
No any disconnection at
2.54N250g
31 3s / 1time 2.54N250g 2 2times
Operation Time Load Times
terminal.
6038mm
Condition
Solderability
- Rinse sample by IPA after hanging it up for 60min. at 38mm from bottom of boiling distilled water and immersed in solder.
MIL-STD-202D208B Equal to MIL-STD-202D-208B
Solder Immersion
1.5mm solder
Solder Temperature Immersion Time
Solder Flux
Resistance to Soldering Heat
Solder Immersion
1.5mm solder
No abnormal point in appearance and structure.
Test Condition
Specifications
National / Panasonic
DC / DC Converter
Cautions for use (1) Be careful not to load over current exceed the maximum rating. Otherwise this product might be broken. (2) Operating a product over the maximum rating for even a moment may result in a product failure or breakage. Never use a product in such a condition that it may cause a safety problem. (3) Operating or short-circuiting the product terminals or inserting a product in the reverse orientation while power is being supplied may cause a breakage. Always avoid such circumstances. (4) Operating in a corrosive gas atmosphere or improper environments such as high-temperature, high-humidity or dewy conditions may lead to product performance deterioration, a breakage, a change in appearance etc. Please avoid such conditions as they are unsafe. (5) Always ground the soldering iron or soldering bath used for assembly operation to avoid any excessive voltage applied to a product. (6) After soldering with solder bridge, incomplete soldering or in the reverse orientation, supplying power may result in a product breakage. Please confirm the soldered condition before supplying power to the product. (7) Excessive stress on the terminals may cause a contact failure or performance deterioration. Please use caution. (8) Due to avoid the failure in the market, please consider in case our product occurs failure and check total performance of your product using our product. If any question arises about the safety of this product, please contact us immediately with a request for an engineering examination. Remarks 1 All of the materials used in this product are those listed as the existing chemical substances based on the "Law for examination and regulation of manufacture of chemical substances
2 - The production process of this product does not use any ozone-depleting chemicals regulateed by the Montreal Protocol. The specification change of the product
It may let me do a specification change caused by the improvement of the product , the cancellation of production of parts. It is decided that it lets me change it at the time of that after prior consultation.
National / Panasonic
DC / DC Converter
Packing Material
Tray (conductive) Refer to fig.1 1 / 80 pcs / tray Maximum quantity
fig.1
Refer to fig.2
Multiple trays with devices are stacked, packed into Packaging case and is tightly closed with adhesive tape.
Insert cushion material in the nmpty space to secure trays.
Packing case has below remarks.
Corrugated cardboard pad
fig.2
Part No.
Quantity Marking
National / Panasonic
DC / DC Converter
Notes of design
Choke Coil DC-DC DC-DC converter
2030mm about 2030mm
Input side
Output side GND GND pattern Leave it from the Choke Coil.
Please pay attentions to avoid overlapping GND pattern and coil.
National / Panasonic