Bandwidth: Offset voltage: typ, specified over entire common-mode rang

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Bandwidth: Offset voltage: typ, specified over entire common-mode rang

Datasheet Thumbnail

Top Searches for this datasheet

MHz, Precision, Distortion, Noise CMOS Amplifier AD8651
Bandwidth: Offset voltage: typ, specified over entire common-mode range V/µs slew rate Rail-to-rail input output swing Input bias current: Single-supply operation: Space-saving MSOP SOIC packaging
CONFIGURATIONS
CONNECT
Figure 8-Lead MSOP (RM-8)
APPLICATIONS
Optical communications Laser source drivers/controllers Broadband communications High speed Microwave link interface Cell phone control Video line driver Audio
CONNECT
Figure 8-Lead SOIC (R-8)
GENERAL DESCRIPTION
AD8651 high precision, noise, distortion, railto-rail CMOS operational amplifier running single-supply voltage from AD8651 rail-to-rail input output amplifier with gain bandwidth typical voltage offset from supply. also features noise nV/Hz. AD8651 used communication areas, such cell phone transmission power control, fiber optic networking, wireless networking, video line drivers. AD8651 features newest generation DigiTrim® in-package trimming. This generation measures corrects offset over entire input common-mode range, reducing distortion caused variation present other rail-to-rail CMOS amplifiers. Offset voltage CMRR both specified guaranteed over entire common-mode range well over extended industrial temperature range. AD8651 offered 8-lead SOIC package 8-lead MSOP package. specified over extended industrial temperature range (-40°C +125°C).
Rev.
Information furnished Analog Devices believed accurate reliable. However, responsibility assumed Analog Devices use, infringements patents other rights third parties that result from use. Specifications subject change without notice. license granted implication otherwise under patent patent rights Analog Devices. Trademarks registered trademarks property their respective owners.
Technology Way, P.O. 9106, Norwood, 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.326.8703 2003 Analog Devices, Inc. rights reserved.
03301-0-003
VIEW (Not Scale)
AD8651
03301-0-001
VIEW (Not Scale)
AD8651
AD8651 TABLE CONTENTS
Electrical Characteristics Electrical Characteristics Absolute Maximum Ratings. Caution. Typical Performance Characteristics Applications. Theory Operation Rail-to-Rail Output Stage. Rail-to-Rail Input Stage Input Protection Overdrive Recovery Layout, Grounding, Bypassing considerations. Power Supply Bypassing. Grounding. Leakage Currents. Input Capacitance Output Capacitance Settling Time. Readings Common-Mode Voltage. Driving 16-Bit ADC. Outline Dimensions Ordering Guide
REVISION HISTORY
Revision Initial Version
Rev. Page
AD8651 ELECTRICAL CHARACTERISTICS
Table (V+= V+/2, 25°C, unless otherwise specified.)
Parameter INPUT CHARACTERISTICS Offset Voltage Symbol Conditions -40°C +85°C, -40°C +125°C, Unit V/°C nV/Hz nV/Hz fA/Hz
Offset Voltage Drift Input Bias Current Input Offset Current
-40°C +125°C -40°C +85°C -40°C +125°C
Input Voltage Range Common-Mode Rejection Ratio
CMRR
Large Signal Voltage Gain
-0.1 -40°C +85°C, -0.1 -40°C +125°C, -0.1 +85°C +125°C -40°C +125°C -40°C +125°C Sourcing Sinking
-0.1 2.67
OUTPUT CHARACTERISTICS Output Voltage High Output Voltage Short Circuit Limit Output Current POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier INPUT CAPACITANCE Differential Common Mode DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Settling Time, 0.01% Overload Recovery Time Total Harmonic Distortion Noise NOISE PERFORMANCE Voltage Noise Density Current Noise Density
PSRR
-40°C +125°C -40°C +125°C
14.5
Step kHz, 0.0006
Rev. Page
AD8651 ELECTRICAL CHARACTERISTICS
Table V+/2, 25°C, unless otherwise specified.)
Parameter INPUT CHARACTERISTICS Offset Voltage Symbol Conditions -40°C +85°C, -40°C +125°C, Unit V/°C
Offset Voltage Drift Input Bias Current
-40°C +85°C -40°C +125°C
Input Offset Current
-40°C +85°C -40°C +125°C
Input Voltage Range Common-Mode Rejection Ratio
CMRR
Large Signal Voltage Gain
-40°C +85°C, -40°C +125°C, 0.1V +85°C +125°C -40°C +125°C -40°C +125°C Sourcing Sinking
-0.1 4.97
V/µs nV/Hz nV/Hz fA/Hz
OUTPUT CHARACTERISTICS Output Voltage High Output Voltage Short Circuit Limit Output Current POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier INPUT CAPACITANCE Differential Common Mode DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Settling Time, 0.01% Overload Recovery Time Total Harmonic Distortion Noise NOISE PERFORMANCE Voltage Noise Density Current Noise Density
PSRR
-40°C +125°C -40°C +125°C
Step =600 kHz, 0.0006
Rev. Page
AD8651 ABSOLUTE MAXIMUM RATINGS
Absolute maximum ratings apply 25°C, unless otherwise noted. Table
Parameter Supply Voltage Input Voltage Differential Input Voltage Output Short-Circuit Duration Electrostatic Discharge (HBM) Storage Temperature Range Package Operating Temperature Range Junction Temperature Range Package Lead Temperature (Soldering, sec) Rating ±5.5 Indefinite 2000 -65°C +150°C -40°C +125°C -65°C +150°C 300°C
Table
Package Type 8-Lead MSOP (RM) 8-Lead SOIC Unit °C/W °C/W
specified worst-case conditions, i.e., specified device soldered circuit board surface mount packages.
Stresses above those listed under Absolute Maximum Ratings cause permanent damage device. This stress rating only functional operation device these other condition above those indicated operational section this specification implied. Exposure absolute maximum rating conditions extended periods affect device reliability.
CAUTION
(electrostatic discharge) sensitive device. Electrostatic charges high 4000 readily accumulate human body test equipment discharge without detection. Although this product features proprietary protection circuitry, permanent damage occur devices subjected high energy electrostatic discharges. Therefore, proper precautions recommended avoid performance degradation loss functionality.
Rev. Page
AD8651 TYPICAL PERFORMANCE CHARACTERISTICS
±2.5V
AMPLIFIERS
(µV)
-200 -160 -120
COMMON-MODE VOLTAGE
(µV)
Figure .Input Offset Voltage Common-Mode Voltage
Figure Input Offset Voltage Distribution
±2.5V
INPUT BAIS CURRENT (pA)
±2.5V
(µV)
-100
03301-0-005
-300
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure Input Offset Voltage Temperature
Figure Input Bias Current Temperature
±2.5V -40°C 125°C
SUPPLY CURRENT (mA)
AMPLIFIERS
03301-0-006
TCVOS (µV/°C)
SUPPLY VOLTAGE
Figure TCVOS Distribution
Figure Supply Current Supply Voltage
Rev. Page
03301-0-009
03301-0-008
-200
03301-0-007
03301-0-004
AD8651
±2.5V
OUTPUT SWING (mV) SUPPLY CURRENT (mA)
2.50 250µA 2.00
1.50
1.00
03301-0-010
TEMPERATURE (°C)
0.00
TEMPERATURE (°C)
Figure Supply Current Temperature
±2.5V
Figure Output Voltage Swing Temperature
±2.5V
VOUT (mV)
03301-0-011
CMRR (dB)
03301-0-014
CURRENT LOAD (mA)
100k FREQUENCY (Hz)
Figure Output Voltage Supply Rail Load Current
Figure CMRR Frequency
4.997 4.996
OUTPUT SWING HIGH
250µA ±2.5V
4.995
CMRR (dB)
4.994 4.993 4.992
03301-0-012
03301-0-015
4.991 4.99
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure Output Voltage Swing High Temperature
Figure CMRR Temperature
Rev. Page
03301-0-013
0.50
AD8651
±2.5V
CMRR (dB)
VOLTAGE NOISE DENSITY (nV/Hz)
03301-0-016
TEMPERATURE (°C)
FREQUENCY (Hz)
100k
Figure CMRR Temperature
Figure Voltage Noise Density Frequency
±2.5V +PSRR -PSRR
±2.5V
CURRENT NOISE DENSITY (fA/Hz)
PSRR (dB)
03301-0-020
03301-0-017
100k FREQUENCY (Hz)
100M
FREQUENCY (Hz)
100k
Figure PSSR Frequency
Figure Current Noise Density Frequency
±2.5V
±2.5V 6.4V
VOLTAGE (1V/DIV)
VOUT
PSRR (dB)
03301-0-018 03301-0-021
TEMPERATURE (°C)
TIME (200µs/DIV)
Figure PSSR Temperature
Figure Phase Reversal
Rev. Page
03301-0-019
AD8651
±2.5V 47pF
03301-0-051
-135 -180 100M 1000M
03301-0-050
CLOSED-LOOP GAIN (dB)
OPEN-LOOP PHASE (°C)
OPEN-LOOP GAIN (dB)
100k FREQUENCY (Hz)
500k FREQUENCY (Hz)
500M
Figure Open-Loop Gain Phase Frequency
Figure Closed-Loop Gain Frequency
±2.5V
MAXIMUM OUTPUT SWING
(dB)
2.7V
03301-0-023
TEMPERATURE (°C)
100k
FREQUENCY (Hz)
100M
Figure Open-Loop Gain Temperature
Figure Maximum Output Swing Frequency
2.5mA 250µA ±2.5V
±2.5V 47pF
OPEN-LOOP GAIN (dB)
VOLTAGE (1V/DIV)
4.2mA
OUTPUT VOLTAGE SWING FROM RAILS (mV)
03301-0-024
TIME (100µs/DIV)
Figure Open-Loop Gain Output Voltage Swing
Figure Large Signal Response
Rev. Page
03301-0-027
03301-0-026
AD8651
±2.5V 200mV ±2.5V 200mV GAIN OUTPUT
VOLTAGE (100mV/DIV)
2.5V
INPUT 200mV
03301-0-028
TIME (10µs/DIV)
TIME (200ns/DIV)
Figure Small Signal Response
Figure Positive Overload Recovery Time
±2.5V 200mV
±2.5V
SMALL SIGNAL OVERSHOOT
OUTPUT IMPEDANCE
GAIN GAIN GAIN
03301-0-032
CAPACITANCE (pF)
03301-0-029
1000 FREQUENCY (Hz)
10000
100000
Figure Small Signal Overshoot Load Capacitance
Figure Output Impedance Frequency
2.5V
±2.5V 200mV GAIN
±1.35V
AMPLIFIERS
-200mV
03301-0-030
-200
-160
-120
TIME (200ns/DIV)
Figure Negative Overload Recovery Time
(µV)
Figure Input Offset Voltage Distribution
Rev. Page
03301-0-033
03301-0-031
AD8651
±1.35V ±1.35V
VOUT (mV)
(µV)
-100
03301-0-034
-300
TEMPERATURE (°C)
CURRENT LOAD (mA)
Figure Input Offset Voltage Temperature
Figure Output Voltage Supply Rail Load Current
2.697 2.696 2.7V 250µA
INPUT OFFSET VOLTAGE (µV)
OUTPUT SWING HIGH
2.695 2.694 2.693 2.692
03301-0-038
03301-0-035
2.691 2.69
INPUT COMMON-MODE VOLTAGE
TEMPERATURE (°C)
Figure Input Offset Voltage Common-Mode Voltage
Figure Output Voltage Swing High Temperature
±1.35V
3.00 2.7V 250µA 2.50
OUTPUT SWING (mV)
SUPPLY CURRENT (mA)
2.00
1.50
1.00
03301-0-036
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure Supply Current Temperature
Figure Output Voltage Swing Temperature
Rev. Page
03301-0-039
0.50
03301-0-037
-200
AD8651
±1.35V ±1.35V 200mV
SMALL SIGNAL OVERSHOOT
VOLTAGE (1V/DIV)
03301-0-043
03301-0-040
TIME (200µs/DIV)
CAPACITANCE (pF)
Figure Phase Reversal
Figure Small Signal Overshoot Load Capacitance
±1.35V 47pF 4.1V
±1.35V 200mV GAIN 1.35V
VOLTAGE (500mV/DIV)
-200mV
03301-0-044
TIME (100µs/DIV)
03301-0-041
-OVER 2.274% +OVER 1.967%
TIME (200ns/DIV)
Figure Large Signal Response
Figure Negative Overload Recovery Time
±1.35V 200mV 47pF
1.35V
±1.35V 200mV GAIN
VOLTAGE (100mV/DIV)
200mV
03301-0-042
03301-0-045
TIME (10µs/DIV)
TIME (200ns/DIV)
Figure Small Signal Response
Figure Positive Overload Recovery Time
Rev. Page
AD8651
±1.35V ±1.35V
CMRR (dB)
(dB)
03301-0-046
100k FREQUENCY (Hz)
TEMPERATURE (°C)
Figure CMRR Frequency
Figure Open-Loop Gain Temperature
±1.35V
±1.35V 47pF
03301-0-053
PSRR (dB)
-PSRR
03301-0-047
CLOSED-LOOP GAIN (dB)
+PSRR
FREQUENCY (Hz)
100k
500k FREQUENCY (Hz)
500M
Figure PSSR Frequency
Figure Closed-Loop Gain Frequency
-135 -180 100M 1000M
OPEN-LOOP PHASE (°C)
OPEN-LOOP GAIN (dB)
100k FREQUENCY (Hz)
Figure Open-Loop Gain Phase Frequency
Rev. Page
03301-0-052
03301-0-049
AD8651 APPLICATIONS
THEORY OPERATION
AD8651 amplifier voltage feedback, rail-to-rail input output precision CMOS amplifier that operates from power supply voltage. This amplifier uses Analog Devices' DigiTrim® technology achieve higher degree precision than available from most CMOS amplifiers. DigiTrim technology, used number ADI's amplifiers, method trimming offset voltage amplifier after been assembled. advantage post-package trimming that corrects offset voltages mechanical stresses assembly. AD8651 available standard pinout, making DigiTrim completely transparent user. input stage amplifier true rail-to-rail architecture, allowing input common-mode voltage range extend both positive negative supply rails. open-loop gain AD8651, with load typically AD8651 used precision application. amplifier does exhibit phase reversal commonmode voltages within power supply. With voltage noise nV/Hz -105 distortion signals, AD8651 great choice high resolution data acquisition systems. noise, sub-pA input bias current, precision offset, high speed make superb preamp fast photodiode applications. speed output drive capability AD8651 also make useful video applications. output voltage swing proportional output current, larger currents will limit close output voltage supply rail. This characteristic rail-to-rail output amplifiers. With output current, output voltage reach within positive negative rails. light loads >100 output swings within supplies.
Rail-to-Rail Input Stage
input common-mode voltage range AD8651 extends both positive negative supply voltages. This maximizes usable voltage range amplifier, important feature single-supply voltage applications. This rail-to-rail input range achieved using input differential pairs, NMOS PMOS, placed parallel. NMOS pair active upper common-mode voltage range, PMOS pair active lower common-mode range. NMOS PMOS input stages separately trimmed using DigiTrim minimize offset voltage both differential pairs. Both NMOS PMOS input differential pairs active transition region, when input commonmode voltage approximately below positive supply voltage. special design technique improves input offset voltage transition region that traditionally exhibits slight variation. result, common-mode rejection ratio improved within this transition band. Compared Burr Brown OPA350 amplifier, shown Figure (A), AD8651, shown Figure (B), exhibits much lower offset voltage shift across entire input common-mode range, including transition region.
Rail-to-Rail Output Stage
voltage swing output stage rail-to-rail achieved using NMOS PMOS transistor pair connected common source configuration. maximum
(µV)
(µV)
03301-0-054
-200
-200
-600
COMMON-MODE VOLTAGE
-600
COMMON-MODE VOLTAGE
OPA350
AD8651
Figure Input Offset Distribution over Common-Mode Voltage
Rev. Page
03301-0-055
-400
-400
AD8651
Input Protection
with semiconductor device, condition could exist input voltage exceed power supply, device's input over-voltage characteristic must considered. inputs AD8651 protected with diodes either power supply. Excess input voltage will energize internal junctions AD8651, allowing current flow from input supplies. This results input stage with picoamps input current that withstand 2000 events (human body model) with degradation. Excessive power dissipation through protection devices will destroy degrade performance amplifier. Differential voltages greater than will result input current approximately (|VCC -VEE|- V)/RI, where resistance series with inputs. input voltages beyond positive supply, input current will approximately 0.7)/RI. Beyond negative supply, input current will about -VEE 0.7)/RI. inputs amplifier subjected sustained differential voltages greater than input voltages beyond amplifier power supply, input current should limited appropriately sized input resistor (RI), shown Figure
0.7V) 30mA 0.7V) 30mA 0.7V) 30mA
(X7R NPO) critical should close possible amplifier package. tantalum capacitor less critical high frequency bypassing, and, most cases, only needed board, supply inputs.
Grounding
ground plane layer important densely packed boards spread current minimizing parasitic inductances. However, understanding where current flows circuit critical implementing effective high speed circuit design. length current path directly proportional magnitude parasitic inductances and, therefore, high frequency impedance path. High speed currents inductive ground return will create unwanted voltage noise. length high frequency bypass capacitor leads critical. parasitic inductance bypass grounding will work against impedance created bypass capacitor. Place ground leads bypass capacitors same physical location. Because load currents flow from supplies well, ground load impedance should same physical location bypass capacitor grounds. larger value capacitors, intended effective lower frequencies, current return path distance less critical.
Leakage Currents
Poor board layout, contaminants, board insulator material create leakage currents that much larger than input bias current AD8651. voltage differential between inputs nearby traces will leakage currents through board insulator, example, V/100 Similarly, contaminants board create significant leakage (skin oils common problem). significantly reduce leakages, guard ring (shield) around inputs input leads that driven same voltage potential inputs. This there voltage potential between inputs surrounding area leakage currents. guard ring completely effective, must driven relatively impedance source should completely surround input leads sides, above below, using multilayer board. Another effect that cause leakage currents charge absorption insulator material itself. Minimizing amount material between input leads guard ring will help reduce absorption. Also, absorption materials, such Teflon® ceramic, necessary some instances.
LARGE
AD8651
BEYOND SUPPLY VOLTAGES
03301-0-056
Figure Input Protection Method
Overdrive Recovery
Overdrive recovery defined time takes output amplifier come supply rail when recovering from overload signal. This usually tested placing amplifier closed-loop gain with input square wave while amplifier powered from either AD8651 excellent recovery time from overload conditions (see Figure Figure 30). output recovers from positive supply rail within supply voltages. Recovery from negative rail within supply.
LAYOUT, GROUNDING, BYPASSING CONSIDERATIONS
Power Supply Bypassing
Power supply pins inputs noise, care must taken that noise-free stable voltage applied. purpose bypass capacitors create impedances from supply ground frequencies, thereby shunting filtering most noise. Bypassing schemes designed minimize supply impedance frequencies with parallel combination capacitors Chip capacitors
Input Capacitance
Along with bypassing ground, high speed amplifiers sensitive parasitic capacitance between inputs ground. picofarads capacitance will reduce input impedance high frequencies, turn increasing amplifier's gain, causing peaking frequency response oscillations.
Rev. Page
AD8651
With AD8651, additional input damping required stability with capacitive loads greater than with direct input output feedback (see next section).
VOUT
03301-0-058
AD8651
200mV
Output Capacitance
When using high speed amplifiers, important consider effects capacitive loading amplifier's stability. Capacitive loading interacts with output impedance amplifier, causing reduction peaking ringing frequency response. reduce effects capacitive loading allow higher capacitive loads, there commonly used methods: shown Figure placing small value resistor (RS) series with output isolate load capacitor from amplifier's output. Heavy capacitive loads reduce phase margin amplifier, cause amplifier response peak become unstable. AD8651 able drive unity gain buffer configuration without oscillation with external compensation. However, application will require higher capacitive load drive when AD8651 unity gain, then following external isolation networks used. effect produced this resistor isolate output from capacitive load. required amount series resistance been tabulated Table different capacitive load drive. While this technique will improve overall capacitive load drive amplifier, biggest drawback that reduces output swing overall circuit.
Figure Snubber Network
Settling Time
settling time amplifier defined time takes output respond step change input, enter remain within defined error band, measured relative point input pulse. This parameter especially important measurements control circuits where amplifiers used buffer inputs outputs. design AD8651 combines high slew rate wide gain bandwidth product produce very fast settling time amplifier. AD8651 configured noninverting gain with step applied input. AD8651 settling time about 0.01% mV). output monitored with 11.2 scope probe.
Readings Common-Mode Voltage
Total harmonic distortion AD8651 well below 0.0004% with load down distortion function circuit configuration, voltage applied, layout, addition other factors. AD8651 outperforms competitor distortion, especially frequencies below shown Figure
+3.5V/-1.5V VOUT 2.0V
AD8651
VOUT
0,05 0.02
03301-0-057
0.01
NOISE
0.005 0.002 0.001 OPA350
Figure Driving Large Capacitive Loads
Table Optimum Values Driving Large Capacitive Loads
0.0005 0.0002 0.0001 AD8651 FREQUENCY (Hz)
03301-0-059
Figure Total Harmonic Distortion
Another stabilize driving large capacitive load snubber network shown Figure This method significant advantage reducing output swing because there isolation resistor signal path. exact values derived experimentally. optimum combination chosen, which would work properly capacitive load drive ranging from this, were chosen.
3.5V VOUT -1.5V 47pF
03301-0-062
AD8651
Figure Noise Test Circuit
Rev. Page
AD8651
Driving 16-Bit
AMPLITUDE FULL SCALE)
-100 -120 -140 -160
03301-0-060
AD8651 excellent choice driving high speed, high precision ADCs. driver amplifier this type application needs have excellent noise settling time. Figure shows complete single-supply data acquisition solution. AD8651 drives AD7685, kSPS, 16-bit data converter.* AD8651 configured inverting gain with single supply. Input applied, samples kSPS. results this solution listed Table strength this circuit fact that amplifier powered with same power supply. case noninverting gain input common-mode voltage encompasses both supplies' voltages. Table
Parameter Noise SFDR Harmonics Harmonics Reading (dB) 105.2 106.6 107.7 113.6
fSAMPLE kSPS 45kHz INPUT RANGE
FREQUENCY (kHz)
Figure Frequency Response AD8651 Driving 16-Bit
AD8651
2.7nF
03301-0-061
AD7685
45kHZ
Figure AD8651 Driving 16-Bit
*For more information about AD7685 data converter,
Rev. Page
AD8651 OUTLINE DIMENSIONS
3.00
3.00
4.90
0.65 0.15 0.00 0.38 0.22 COPLANARITY 0.10 1.10 0.80 0.60 0.40
0.23 0.08 SEATING PLANE
COMPLIANT JEDEC STANDARDS MO-187AA
Figure 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown millimeters
5.00 (0.1968) 4.80 (0.1890)
4.00 (0.1574) 3.80 (0.1497)
6.20 (0.2440) 5.80 (0.2284)
1.27 (0.0500) 0.25 (0.0098) 0.10 (0.0040)
1.75 (0.0688) 1.35 (0.0532)
0.50 (0.0196) 0.25 (0.0099)
0.51 (0.0201) COPLANARITY SEATING 0.31 (0.0122) 0.10 PLANE
0.25 (0.0098) 1.27 (0.0500) 0.40 (0.0157) 0.17 (0.0067)
COMPLIANT JEDEC STANDARDS MS-012AA CONTROLLING DIMENSIONS MILLIMETERS; INCH DIMENSIONS PARENTHESES) ROUNDED-OFF MILLIMETER EQUIVALENTS REFERENCE ONLY APPROPRIATE DESIGN
Figure 8-Lead Standard Small Outline Package [SOIC] (R-8) Dimensions shown millimeters (inches)
ORDERING GUIDE
Model AD8651ARM-REEL AD8651ARM-R2 AD8651AR AD8651AR-REEL AD8651AR-REEL7 Temperature Range -40°C +125°C -40°C +125°C -40°C +125°C -40°C +125°C -40°C +125°C Package Description 8-Lead MSOP 8-Lead MSOP Lead SOIC Lead SOIC Lead SOIC Package Option RM-8 RM-8 Branding
Rev. Page
AD8651 NOTES
Rev. Page
AD8651 NOTES
2003 Analog Devices, Inc. rights reserved. Trademarks registered trademarks property their respective owners. C03301-0-10/03(0)
Rev. Page

Bandwidth: Offset voltage: typ, specified over entire common-mode rang

Top Searches for this datasheet

Other recent searches