Series sFeatures JIS, standards compliant fully intermateabl
|
|
|
Top Searches for this datasheet
Type Fiber Optic Connectors
Series
sFeatures
JIS, standards compliant fully intermateable with NTT's products.
5973 (F04 type fiber optic connectors) 61754-4
Plugs with strain relief boot
Long strain relief boot assures that there performance losses when pull force applied vertical bend direction. color boot identify type polishing: Blue: polishing Light purple: Advanced (AdPC) polishing Green: Angled polishing (APC) Other colors also possible.
Zirconia Split Sleeve Adapter
Reduces possibility powdering caused repeated insertion withdrawal ferrule.
Duplex Type: Rigid Type
Available following types; type spacing between fibers, high density applications. type 12.7 spacing between fibers, profile, applications. Refer page further information.
Duplex Type: Adjustable Type Comply With ANSI Standards
Floating mechanism with Duplex plug. also fully compatible with HSCF fixed type.
Simplified Plugs Receptacles.
Small size (23.8mm plug length) simplified plug designed equipments inside connection. Refer page further information.
sApplications
LAN, public communications lines, CableTV, computer transmission systems, test equipment, other applications requiring reliable fiber optic connections.
sProduct Specifications
Ratings Operating temperature range -25°C +70°C Storage temperature range -25°C +70°C
Item Optical Characteristics Insertion Loss
(SM) (GI) (SM)
Test Method (IEC 61300) Wavelength 1310nm (LD) Wavelength 1310nm (LED) Wavelength 1310nm (LD)
Specifications 0.5dB max. (PC, AdPC, APC) 0.3dB max. (PC) 22dB min. (PC) 60dB min. (APC) 22dB min. (PC) Simplex plug Engagement force: 19.6 max. Separation force: 19.6 max. Engagement force: max. Separation force: max. 5.9N 3.9N 40dB min. (AdPC)
Return Loss
(GI)
Engagement Separation /force Mechanical Characteristics
Measured with corresponding connector.
Duplex plug
Ferrule withdrawal force Cable retention (Straight pull) Durability (cycles, mating/un-mating) Vibration Shock Humidity (Temperature/ humidity- cycles) Change temperature heat Cold Salt mist
Extract zirconia gauge 2.499 ±0.0005 from split sleeve. tensile load minute. 1000 times Frequency: single amplitude 0.75 hours each axis. Acceleration m/s2, duration, half-wave waveform, cycles each axis. -10°C 65°C, humidity: cycles -40°C +75°C cycles (Complies with Telcordia standard GR-326-CORE) hours 85°C hours -25°C hours concentration salt mist
Copper alloy split sleeve Zirconia split sleeve
Insertion loss fluctuation after test: 0.2dB max. visible damage, dislocation clamp cable.
Insertion loss fluctuation after test: 0.2dB max. visible damage, cracks part dislocation.
Environmental Characteristics
significant corrosion.
sMaterials
Part Simplex plug housing Spring Ferrule Simplex adapter housing 4-position adapter housing 5-position adapter housing Receptacle housing Attenuator housing Split sleeve Dust Material Synthetic resin Stainless Steel Zirconia Synthetic resin Zinc alloy Synthetic resin Synthetic resin Zinc alloy Zinc alloy Zirconia copper alloy Synthetic resin
sFunction diagram
Simplex type
Adapter-Panel Mounting
Plastic Housing Products HSC-A3 HSC-A3-D1 HSC-A3-D2 Cast Housing Products HSC-A2 HSC-A2-D1 HSC-PH2-E1,E2,E5 HSC-PH3-B1,B2,B5
fiber Light weight type
type plug housing
Strain relief type (For Cable Diameter: 3mm)
Conversion adapter
Screw Mounting
HSC-PH0.9-E1,E2,E5 Short length type (For Cable Diameter: 2mm)
HSCJ-HRFCJ-B Panel Mounting
HSC-PH2-E1-A Short length type (For Cable Diameter: 3mm)
HSCJ-HRFCJ-C Screw Mounting
HSCJ-HSTJ-B
HSC-PH3-A4
Receptacle
Conversion adapter jack Plug HSCP-HRFCJ-1, HSCP-HRFCJ-1AS,
HSC-R1-B,R2-B
Simplified receptacle
HSC-SR-1,D1 HSC-SR-2,D2
<Tool Insertion/Extraction Connectors>
type plug housing
Long strain relief (For Cable Diameter: 3mm)
Adapter
HSC2-PH2-E1,E2,E5 HSC2-PH3-B1,B2,B5 fiber Type 4-Position Adapter Panel Mounting type HSC2-4A HSC2-4A-D1 5-Position Adapter Panel Mounting type HSC2-5A
HSC2-PH0.9-E1,E2 Short length type (For Cable Diameter:
HSC2-PH2-E1-A
Simplified receptacle
Short length type (For Cable Diameter: 3mm) HSC2-PH3-A
HSC2-8SR-1 HSC2-8SR-D1
Duplex type <Plug Housings>
type
Plug Housing (For Cable Diameter: 2mm&3mm) HSCF-2PH2-E1,E2 HSCF-2PH3-B1,B2
<Adapters>
<Complies with ANSI Standard adjustable Type>
Single mode (For Cable Diameter: 2mm&3mm)
type
Panel Mounting HSCF-2A(P) HSCF-2A-D(P)
HSCM-2SPH2-B1,B2 HSCM-2SPH3-B1,B2 Multi mode (For Cable Diameter: 3mm)
type
HSCM-2GPH2-B1 HSCM-2GPH3-B1 Snap HSCH-2A1(P) HSCH-2A1-D(P) Screw Mounting HSCH-2A(P) HSCH-2A-D(P)
type
Plug Housing (For Cable Diameter: 3mm) HSCH-2PH2-B1,B2 HSCH-2PH3-B1,B2
Fixed attenuators
single mode
HSC-AT 11K-A** Page details.
HSC-AT5S-B**A
Terminators
Plug type
Tool- Insertion/Removal
HSC-TM-P1
HSC2-TM-P1
Receptacle type
Tool Insertion/Removal
HSC-TM-R1 Page details.
HSC2-TM-R1
Simplex type
qStrain relief type
Part Number HSC-PH2-E1(31) HSC-PH2-E2(31) HSC-PH2-E5(31) HSC-PH3-B1(31) HSC-PH3-B2(31) HSC-PH3-B5(31)
704-0327-3-31 704-0328-6-31 704-3108-6-31 704-0222-5-31 704-0223-8-31 704-3020-7-31
Fiber cable type
Boot color Blue
Polishing type Outer jacket fixing AdPC AdPC Crimp Glue
Light purple Green Blue
Light purple Green
qLight weight type (For 0.9mm fiber)
Part Number HSC-PH0.9-E1(06) HSC-PH0.9-E2(31) HSC-PH0.9-E5(31)
704-0339-2-06 704-0354-6-31 704-3104-5-31
Boot color Blue Light purple Green
Polishing type
AdPC
qShort length type (For Cable)
36.5
Part Number HSC-PH2-E1-A(31) HSC-PH2-E2-A(31) HSC-PH2-E5-A
704-0464-4-31 704-0480-0-31 704-3124-2
Boot color Blue Light purple Green
Polishing type
Outer jacket fixing
AdPC Glue
qShort length type (For Cable)
36.5
Part Number HSC-PH3-A4(31) HSC-PH3-A4(32)
704-0245-0-31 704-0245-0-32
Boot color Blue Light purple
Polishing type
Outer jacket fixing Crimp
AdPC
sTool Insertion/Extraction Plug Housings
qStrain relief type
Part Number HSC2-PH2-E1(31) HSC2-PH2-E2(31) HSC2-PH2-E5(31) HSC2-PH3-B1(31) HSC2-PH3-B2(31) HSC2-PH3-B5
704-0329-9-31 704-0330-8-31 704-3109-9-31 704-0226-6-31 704-0227-9-31 704-3123-0
Fiber cable type
Boot color Blue
Polishing type Outer jacket fixing AdPC AdPC Crimp Glue
Light purple Green Blue
Light purple Green
qLight weight type (For 0.9mm fiber)
Part Number HSC2-PH0.9-E1(31) HSC2-PH0.9-E2(31)
704-0421-1-31 704-0422-4-31
Boot color Blue Light purple
Polishing type
AdPC
qShort length type (For Cable)
36.5
Part Number HSC2-PH2-E1-A HSC2-PH2-E2-A
704-0482-6-00 704-0481-3-00
Boot color Blue Light purple
Polishing type
Outer jacket fixing Glue
AdPC
qShort length type (For Cable)
36.5
Part Number HSC2-PH3-A(31) Note Please contact HIROSE other variations.
704-0015-0-31
Boot color Blue
Polishing type
Outer jacket attachment Crimp
sReceptacles
15.2 12.2 13.4
12.8
Note: Designed power meter sensors Part Number HSC-R1-B(05) HSC-R2-B(05) 704-0022-6-05 704-0023-9-05 Remarks
sFerrules
(Hole diameter)
qFor AdPC
(Hole diameter)
7.95 +0.05
Part Number HSC-F321-A125(10) HSC-F321-A1255(10) HSC-F321-A126(10)
704-0070-9-10 704-0200-2-10 704-0071-1-10
dimension 0.125 0.1255 0.126
Applicable Fiber cable
SM,MM
qFor
+0.001 (Hole diameter)
16.15 8.095 +0.05
diameter)
Part Number HSC-F391-A125 HSC-F391-A126 HSC-F391-A127 (1)No design. (2)The entrance angle fiber been easy fiber insertion.
704-3101-7 704-3102-0 704-3103-2
dimension 0.125 0.126 0.127
Applicable Fiber cable
Minimal gap:(0.1mm max.) fiber entrance angle
sAdapters Panel Mounting
adapters
SC/SC Plastic Housing
27.4 18±0.1 -0.5 -0.5 12.8
BPanel cut-out
2-M20.4 Panel thickness: 1.6mm
+0.2
Part Number HSC-A3(51) HSC-A3-D1(02) HSC-A3-D2(06)
704-0092-1-51 704-0217-5-02 704-3007-9-06
Split sleeve Copper alloy Zirconia Zirconia
Remarks PC,AdPC
SC/SC Cast Metal Housing
27.4
BPanel cut-out
18±0.1 -0.5 -0.5
12.8
2-M20.4 +0.2 Panel thickness: 1.6mm
Part Number HSC-A2(51) HSC-A2-D1(01)
704-0020-0-51 704-0258-2-01
Split sleeve Copper alloy Zirconia
qSC2 adapters
SC/SC2 4-way adapter
BPanel cut-out
28.5 -0.5
-0.2
28.2
12.8
Panel thickness: 1.6mm
Part Number HSC2-4A(51) HSC2-4A-D1(01)
704-0024-1-51 704-0290-5-01
Split sleeve Copper alloy Zirconia
SC/SC2 5-way adapter (for Multi-mode fiber)
BPanel cut-out
35.3 +0.5 +0.5 12.8 +0.5 Panel thickness: 1.6mm
+0.5
Part Number HSC2-5A(51)
704-0025-4-51
Split sleeve Copper alloy
sConversion adapters
Screw Mounting
21.2 12.2 M80.75 12.8 13.4
BPanel cut-out
2-M20.4 +0.2 +0.5
13.4±0.1
Part Number HSCJ-HRFCJ-B(51)
704-0021-3-51
Split sleeve Copper alloy
Snap-in and/or Screw Mounting
BPanel cut-out
12.8
+0.5
2-M20.4 +0.2 +0.5
M80.75
21.2
13.4±0.1 Panel thickness: 1.6mm
Part Number HSCJ-HRFCJ-C(51)
704-0206-9-51
Split sleeve Copper alloy
Screw Mounting
13.4
BPanel cut-out
+0.5
2-M20.4 +0.2 +0.5
12.8
14.7 28.4
13.4 ±0.1 13.7
Part Number HSCJ-HSTJ-B(51)
704-0102-3-51
Split sleeve Copper alloy
12.8
M80.75
(1.8)
27.9
Part Number HSCP-HRFCJ-1(51) HSCP-HRFCJ-1AS(51) HSCP-HRFCJ-2(51) HSCP-HRFCJ-2AS(51)
704-0203-0-51 704-0288-3-51 704-0204-3-51 704-0289-6-51
Split sleeve
Polishing type Applicable Fiber cable AdPC AdPC GI-50/125
Copper alloy
SM-9.5/125
qThe positions guide guide slot will always aligned.
19.5
(3.9)
13.7
12.8
Part Number HRFCP-HSCJ-1(51) HRFCP-HSCJ-1AS(51) HRFCP-HSCJ-2(51) HRFCP-HSCJ-2AS(51)
701-0065-0-51 701-0108-0-51 701-0085-7-51 701-0109-3-51
Split sleeve
Polishing type Applicable Fiber cable AdPC AdPC GI-50/125
Copper alloy
SM-9.5/125
qThe positions guide slot guide will always aligned.
sCap
Hole
Part Number HSC-C2
17.8 17.8
704-0061-8
Applicable products HSC-A2 HSC-A3 HSCJ-HRFCJ-B CHSCJ-HSTJ-B HSC-R1-B HSC-R2-B
BMounting Dimensions
Unit:
Combination Adapter Housing HSC-PH2-E1
Plug Panel Plug Adapter
Dimensions
HSC-A2 HSC-A2-D1 HSC-A3 HSC-A3-D1
HSC-PH2-E2 HSC-PH3-B1 HSC-PH3-B2 HSC-PH2-E1-A HSC-PH3-A4 HSC-PH0.9-E1 HSC2-PH2-E1
15.2
53.4
23.4
10.6
39.5
15.2 15.2
34.9 31.4
23.4 21.4
10.6 10.6
HSC2-4A HSC2-4A-D1 HSC2-5A HSC2-5A-D1
HSC2-PH2-E2 HSC2-PH3-B1 HSC2-PH3-B2 HSC2-PH3-A HSC-PH2-E1-A HSC2-PH0.9-E1 HSC-PH2-E1
13.5
53.4
39.5
13.5 13.5
34.9 31.4
HSC-R1-B HSC-R2-B
HSC-PH2-E1 HSC-PH3-B1 HSC-PH3-B2
57.5
27.5
14.7
Note: Panel thickness: 1.6mm
sCable assembly
strain relief type.
Part Number HSC-SPE2-F3Q-L HSC-SPC2-F3A-L HSC-ASPE2-F3Q-L HSC-ASPC2-F3A-L HSC-CSPE2-F3Q-L HSC-CSPC2-F3A-L HSC-SPE2-F3P-L HSC-SPC2-F3B-L
704-1073-2 704-1089-2 704-1071-7 704-1094-2 -704-1081-0 704-1086-4
Fiber cable type
Polishing type
Cable Diameter
SM-9.5/125
AdPC
GI-50/125
Note within Product Number indicates length cable illustrated drawing. Please specify values metric units. Note HSC2 cable assemblies also available. Note polishing performed angle Mating with connectors polished AdPC possible. Note Please contact HIROSE have requests.
sTools
qCrimp Tool
Part Number
Applicable connector
HSC-T3
704-0287-0
plug 2mm, cable.
(This used crimping Kevlar time plug termination.)
<Locations>
(1)2mm Jacket crimping: Please select section Jacket crimping: Please select section (2)Kevlarcrimping: Please select section
qHSC2 Insertion/Extraction Tool
Part Number HSC-T1-L
704-0286-8
Applicable Products HSC2 series.
<How operate>
1.Open tool compressing levers shown below.
Hold/release lever 2.Insert tool (with opening tips) into adapter.
3.Release levers (then tool catch HSC2 plug) release connector.
qPlug assemble Tool
Part Number HSC2-PH2/CVMD
902-6029-1
Duplex
BNotes
duplex adapters also connected with Simplex plugs. type attenuators (HSC-AT11K-A-) connected only with type adapters.
sPlug Housing
Type
22.1 12.7
Part Number HSCF-2PH2-E1(P)(31) HSCF-2PH2-E2(P)(31) HSCF-2PH3-B1(P)(31) HSCF-2PH3-B2(P)(31)
704-2109-3-31 704-2120-6-31 704-2032-0-31 704-2036-1-31
Applicable Cable Diameter
Boot Color Blue Light purple Blue Light purple
Polishing type AdPC AdPC
Type
15.89
Part Number HSCH-2PH2-B1(P)(31) HSCH-2PH2-B2(P)(31) HSCH-2PH3-B1(P)(31) HSCH-2PH3-B2(P)(31)
704-2046-5-31 704-2058-4-31 704-2054-3-31 704-2050-2-31
Applicable Cable Diameter
Boot Color Blue Light purple Blue Light purple
Polishing type AdPC AdPC
sAdapters
type Snap-in and/or Screw Mounting
BPanel cut-out
+0.2 34.7 30.7 12.7 25.9 26.2 +0.3 30.7±0.1 27.4 Panel thickness: 1.6mm
Part Number HSCF-2A(P)(51) HSCF-2A-D(P)(06) HSCF-2A-D2(P)(06)
704-2008-6-51 704-2040-9-06 704-2112-8-06
Split sleeve Copper sleeve Zirconia
Color Blue Green
type Snap-in
20.5 17.9 27.4
BPanel cut-out
15.5 12.8
+0.5
(8.5)
+0.3
Panel thickness: 1.6mm
Part Number HSCH-2A1(P)(51) HSCH-2A1-D(P)(02)
704-2066-2-51 704-2117-1-02
Split sleeve Copper sleeve Zirconia
Color Blue
type Snap-in and/or Screw Mounting
17.9 (8.5)
BPanel cut-out
M20.4 +0.5
+0.2
12.8
27.4
+0.3
18±0.1 Panel thickness: 1.6mm
Part Number HSCH-2A(P)(51) HSCH-2A-D(P)(02) HSCH-2A-D2(P)(03)
704-2020-1-51 704-2062-1-02 704-2108-0-03
Split sleeve Copper sleeve Zirconia
Color Blue Green
Duplex connector assemblies.
Part Number HSCF-SP2PP-F3Q-L HSCH-SP2PP-F3Q-L HSCF-SP2PP-F3QW-L HSCH-SP2PP-F3QW-L HSCF-SP2PP-F3A-L HSCH-SP2PP-F3A-L HSCF-SP2PP-F3AW-L HSCH-SP2PP-F3AW-L HSCF-ASP2PP-F3Q-L HSCH-ASP2PP-F3Q-L HSCF-ASP2PP-F3QW-L HSCH-ASP2PP-F3QW-L HSCF-ASP2PP-F3A-L HSCH-ASP2PP-F3A-L HSCF-ASP2PP-F3AW-L HSCH-ASP2PP-F3AW-L HSCF-SP2PP-F3P-L HSCH-SP2PP-F3P-L HSCF-SP2PP-F3PW-L HSCH-SP2PP-F3PW-L HSCF-SP2PP-F3B-L HSCH-SP2PP-F3B-L HSCF-SP2PP-F3BW-L HSCH-SP2PP-F3BW-L 704-4031-9 -704-4013-7 -704-4018-0 704-4038-8 -704-4039-0 -Fiber cable type Polishing type Cable Diameter cord cord SM-9.5/125 cord AdPC cord cord cord
GI-50/125
Note within Product Number indicates length cable. Please specify Note Please contact have requests. HIROSE will offer excellent solutions meet your requirements.
BMounting Dimensions
Plug Panel Adapter
Plug
Type> Combination Adapter Housing HSC-PH*-E# HSCF-PH*-B#(P) HSC-PH*-A4 HSC-PH0.9-E# Combination Adapter HSCH-2A(P) HSCH-2A-D(P) HSCH-2A1(P) Housing HSC-PH*-E# HSCH-2PH*-B#(P) HSC-PH*-A4 HSC-PH0.9-E# 39.5 15.2 15.2 15.2 39.5 15.2 15.2 15.2 Dimensions 53.4 34.9 31.4 23.4 23.4 21.4
Unit: 10.6 10.6 10.6
HSCF-2A(P) HSCF-2A-D(P)
Type> Dimensions 53.4 34.9 31.4 23.4 23.4 21.4 10.6 10.6 10.6
Note indicates cable diameter: Note indicates polishing type:
diameter diameter polishing AdPC polishing
Complies with ANSI Standard
ANSI X3T9.3 Fibre Channel Physical Signaling Interface
sPlug Housings
qFor Single Mode
12.7 8.99
14.1
36.7 61.5
Part Number HSCM-2SPH2-B1 HSCM-2SPH3-B1 HSCM-2SPH2-B2 HSCM-2SPH3-B2
704-2100-9 704-2102-4 704-2133-8
Applicable cable Simplex-2mm dia. cable dual fiber cable Simplex-3mm dia. cable dual fiber cable Simplex-2mm dia. cable dual fiber cable Simplex-3mm dia. cable dual fiber cable
Boot color Polishing type Blue
Light purple
AdPC
qFor Multi-mode
12.7 8.99
14.1
36.7 61.5
Part Number HSCM-2GPH2-B1 HSCM-2GPH3-B1
704-2104-0 704-2106-5
Applicable cable Simplex-2mm dia. cable dual fiber cable Simplex-3mm dia. cable dual fiber cable
Boot color Polishing type Blue
sFerrules
Convertional ferrules. Refer page details.
sAdapters
type adapters. Refer page details.
Simplified Receptacles Plugs
sFeatures
1.Space saving: Only 23.8mm plug length.
Types plug Simplified plug plug 0.9mm fiber plug 0.9mm fiber Length(mm) 23.8
Installation image
side equipment side equipment
Simplified plug
plug
sProduct Specifications
Ratings Operating temperature range -25°C +70°C Storage temperature range -25°C +70°C
Item Optical Characeristics Insertion Loss Return Loss Ferrule withdrawal Durability (cycles, mating/un-mating) Vibration Shock Humidity resistance (Temperature/ humidity- cycles) Change temperature Heat Cold
(SM) (GI) (SM) (GI)
Test Method (IEC 61300) Wavelength 1310nm (LD) Wavelength 1310nm (LED) Wavelength 1310nm (LD) Extract zirconia gauge 2.499 ±0.0005 from split sleeve. 1000 times Frequency: single amplitude 0.75 hours each axis. Acceleration m/s2, duration, sine halfwave waveform, cycles each axis. Temperature: -10°C 65°C, humidity: cycles Temperature: -40°C +75°C 42cycles (Complies with Telcordia standard GR-326-CORE) hours 85°C hours -25°C
Specifications 0.5dB max. (PC, AdPC) 0.3dB max. (PC) 22dB min. (PC) 40dB min. (AdPC) 22dB min. (PC) Copper alloy split sleeve Zirconia split sleeve 5.9N 3.9N
Mechanical Characteristics
Insertion loss fluctuation after test: 0.2dB max. visible damage, cracks part dislocation.
sMaterials
qSimplified receptacle
Part Housing Sleeve Split sleeve Plate Dust Material Synthetic resin Synthetic resin Zirconia Copper alloy Stainless steel Synthetic resin
qSimplified plug
Part Ferrule Boot Ferrule Material Zirconia Synthetic resin Synthetic resin Synthetic resin
qSimplified plug extraction tool
Part Extraction tool Material Synthetic resin
Environmental Characteristics
sSimplified receptacle
qSimplex Shrouded
BPanel cut-out
12.8
12.8
+0.5
Part Number HSC-SR-1(51) HSC-SR-D1(02) HSC-SR-1(03)
704-0320-4-51 704-0321-7-02 704-0320-4-03
Split sleeve Copper alloy Zirconia None
qSimplex Unshrouded
BPanel cut-out
12.5
12.5
16.2
9.35 +0.5
Part Number HSC-SR-2(51) HSC-SR-D2(06) HSC-SR-2(03)
704-0291-8-51 704-0292-0-06 704-0291-8-03
Split sleeve Copper alloy Zirconia None
qDuplex type Shrouded
12.8
12.8
+0.5
+0.5 18±0.1
Panel thickness: 1.6mm 704-0293-3-51 704-0294-6-01 704-0293-3-03
Part Number HSCH-2SR-1(R)(51) HSCH-2SR-D1(R)(01) HSCH-2SR-1(R)(03)
Split sleeve Copper alloy Zirconia None
Color Blue
qDuplex type Shrouded (Without plate)
12.8
12.8
+0.5
+0.5 18±0.1
Part Number HSCH-2SR-3(R)(51) HSCH-2SR-D3(R)(01) HSCH-2SR-3(R)(03)
704-0300-7-51 704-0301-0-01 704-0300-7-03
Split sleeve Copper alloy Zirconia None
Color Blue
17.9 15.9
BPanel cut-out
17.9 15.9
BPanel cut-out
12.7 +0.5 18±0.1
+0.5 18±0.1
JAPAN
Color Blue
JAPAN
Color Blue
qDuplex Type Unshrouded
BPanel cut-out
2-M20.4 25.5
+0.2
34.7 25.5 21.7 12.7
25.7 +0.5 30.7±0.1 16.2
Part Number HSCF-2SR-2(P)(51) HSCF-2SR-D2(P)(02) HSCF-2SR-2(P)(03)
704-0295-9-51 704-0296-1-02 704-0295-9-03
Split sleeve Copper alloy Zirconia None
Color
sSimplified Receptacles
q4-position Shrouded
24.3 10.73
BPanel cut-out
2-M2
28.6 +0.5
+0.2
37.4 33.4 28.2
JAPAN
JAPAN
12.4
8+0.5
12.7+0.5
Part Number HSC2-4SR-1(51) HSC2-4SR-D1(01) HSC2-4SR-1(03)
704-0311-3-51 704-0312-6-01 704-0311-3-03
Split sleeve Copper alloy Zirconia None
Color
q8-Position Shrouded
24.3
BPanel cut-out
10.7
2-M2
+0.2
64.6
60.6
55.4
12.4
12.7
+0.5
Part Number HSC2-8SR-1(51) HSC2-8SR-D1(01) HSC2-8SR-1(03)
704-0266-0-51 704-0270-8-01 704-0266-0-03
Split sleeve Copper alloy Zirconia None
60.6±0.1
+0.5
Color
+0.5
Blue
Blue
Blue
q8-Position Unshrouded
BPanel cut-out
14.5 11.5
2-M2
20.4
+0.2
12.4
Part Number HSC2-8SR-2(51) HSC2-8SR-D2(01) HSC2-8SR-2(03) 704-0318-2-51 704-0403-0-01 704-0318-2-03
12.7+0.5
Split sleeve Copper alloy Zirconia None Blue Color
sSimplified plug
qfor 0.9mm fiber
±0.0005
diameter)
10.3
23.8
Part Number HSC2-FK-A125(31)
704-0267-3-31 704-0268-6-31
dimension 0.125 0.126 0.1255
56+0.5 60.6±0.1
64.6 60.6 55.4
Boot color
HSC2-FK-A126(31) HSC2-FK-A1255(31)
Black
704-0269-9-31
sSplit sleeve
Zirconia
11.4
Copper alloy Part Number HSC-SLIT-SLEEVE(51) HSC-D 704-0275-1-51 704-0264-5 Split sleeve Copper alloy Zirconia
sExtraction tool Simplified plug
Part Number HSC-T10
704-0350-5
Part Number HSC-T12
704-0448-8
Other recent searches
WP934RS - WP934RS WP934RS Datasheet
TVP5151 - TVP5151 TVP5151 Datasheet
SR1020 - SR1020 SR1020 Datasheet
SR1060 - SR1060 SR1060 Datasheet
R5F21194SP - R5F21194SP R5F21194SP Datasheet
JCIR-25 - JCIR-25 JCIR-25 Datasheet
FR101G - FR101G FR101G Datasheet
FR107G - FR107G FR107G Datasheet
DS0705 - DS0705 DS0705 Datasheet
B5011 - B5011 B5011 Datasheet
B39461-B5011-H810 - B39461-B5011-H810 B39461-B5011-H810 Datasheet
5U-EGT08-AN6X-H1341 - 5U-EGT08-AN6X-H1341 5U-EGT08-AN6X-H1341 Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
