Series qStaggered termination configuration. Only 1.25 above boar

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Series qStaggered termination configuration. Only 1.25 above boar

Datasheet Thumbnail

Top Searches for this datasheet

0.3mm Contact Pitch, 1.25mm above board, Flexible Printed Circuit Connectors
Series
qStaggered termination configuration. Only 1.25 above board.
Leadless type
Completely enclosed bottom surface
Lead type
1.25mm
sFeatures
insertion force high holding force
Hirose Electric's unique insertion force (LIF) design (patents pending) improves Flexible Printed Circuit (FPC) holding force after insertion. insertion force:Reduced approximately compared with FH18 Series connectors). holding force:Improvement approximately compared with FH18 Series connectors).
Temporary hold
There need hold after insertion connector. connector will hold correct position, allowing closing actuator. When actuator opened
Easy board mounting
surface mounted termination contacts staggered centers, positioned front back connector. Bottom connector completely insulated, allowing conductive traces under connector.
Proven Flip-lock Actuator assures easy reliable operation
Rotating actuator permits easy insertion reliable connection with FPC. Tactile sensation confirms complete mechanical locking actuator electrical connection.
Variations suit different mounting areas
Available with lead leadless type terminations (for opposing insertion side).
Designed placement with automatic equipment
Flat surface allows pick-up with vacuum nozzles. Packaged embossed tape, reel. reel contains 2,500 pieces.
Temporary hold
Accepts 0.2mm thick Variety contact positions
Available with 15,17,21, 51and pos.
Environmental considerations
Plating lead-free order protect environment.
sApplications
Mobile phones, PDA's, digital cameras, digital video cameras other compact devices requiring interconnections main circuit with LCD, plasma display (PDP), camera module, other devices. When actuator closed
sProduct Specifications
Current rating Ratings Voltage rating Operating temperature range (Note Operating humidity range Relative humidity max. condensation) Storage temperature range (Note Storage humidity range Relative humidity max.
Recommended Item
Thickness: 0.2±0.03mm tinned copper pure plating (Note Specification
AC/1 minute cycles Frequency: single amplitude 0.75 hours each directions Acceleration duration, sine half-wave waveform, cycles each axis.
Conditions
Insulation resistance ohms min. Withstanding voltage flashover insulation breakdown Contact resistance ohms max. *Including FPC/FFC conductor resistance
Contact resistance: ohms max. Durability (insertion/ withdrawal) damage, cracks, parts dislocation. Vibration electrical discontinuity more. Contact resistance: ohms max. damage, cracks, parts dislocation. electrical discontinuity min. Contact resistance: ohms max. damage, cracks, parts dislocation. Contact resistance: ohms max. Insulation resistance: ohms min. damage, cracks, parts dislocation. Contact resistance: ohms max. Insulation resistance: ohms min. damage, cracks, parts looseness.
Shock
Humidity (Steady state)
hours temperature 40°C humidity Time: (Minutes) cycles Reflow: recommended temperature profile Manual soldering: seconds
Temperature cycle Resistance soldering heat
deformation components affecting performance.
Note Includes temperature rise caused current flow. Note term "storage" refers products stored long period time prior mounting use. Operating Temperature Range Humidity range covers non- conducting condition installed connectors storage, shipment during transportation. Note When gold plated, connector contacts should also gold plated: Select (05) specification.
sMaterials
Part Insulator Contacts Material Phosphor bronze Color:Beige Color:Black Pure plating (Note UL94V-0 -Finish Remarks
sOrdering information
FH23
Series name FH23 contacts.
(05)
Terminal type
SHW: horizontal mounting type, lead type termination. SHAW: horizontal mounting type, lead-less type termination.
Number contacts
Contact pitch:
Plating specifications
Blank (05) plating Gold plating
BConnector Dimensions (Lead Type termination)
(0.15)
2.45
Number contacts indicator
(0.12)
0.05MAX. 4.15
(2.84)
1.25(Including contact terminal leads) 0.05MAX. 0.1MAX.
insertion area dimensions)
0.1MAX. 0.55
Notes coplanarity each terminal lead within 0.1. contact terminal lead position indicates dimension from surface, bottom surface insulator body. discoloration plastic compound will AFFECT form, function connector.
Lead Type
Part Number FH23-15S-0.3SHW FH23-17S-0.3SHW FH23-21S-0.3SHW FH23-25S-0.3SHW FH23-27S-0.3SHW FH23-31S-0.3SHW FH23-33S-0.3SHW FH23-39S-0.3SHW FH23-45S-0.3SHW FH23-51S-0.3SHW FH23-61S-0.3SHW 586-1317-0 586-1300-7 586-1314-1 586-1322-0 586-1308-9 586-1302-2 586-1304-8 586-1306-3 586-1318-2 586-1312-6 586-1310-0 Number Contacts 17.0 17.6 18.8 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 13.6 14.2 15.4 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 14.2 14.8 16.0 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0
Unit: 14.83 15.43 16.63 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63
Note: Embossed tape reel packaging(2,500 pieces/reel) Please order number reels.
sConnector Dimensions Diagram (Leadless Type termination)
(0.15)
2.45
Number contacts indicator
(0.12)
0.05MAX. 0.1MAX. 0.55 4.15
(2.84)
1.25 (Including contact terminal leads) 0.05MAX. 0.1MAX.
insertion area dimensions)
Notes coplanarity each terminal lead within 0.1. contact terminal lead position indicates dimension from surface, bottom surface insulator body. discoloration plastic compound will AFFECT form, function connector.
Leadless Type
Part Number FH23-15S-0.3SHAW FH23-17S-0.3SHAW FH23-21S-0.3SHAW FH23-25S-0.3SHAW FH23-27S-0.3SHAW FH23-31S-0.3SHAW FH23-33S-0.3SHAW FH23-39S-0.3SHAW FH23-45S-0.3SHAW FH23-51S-0.3SHAW FH23-61S-0.3SHAW 586-1316-7 586-1301-0 586-1315-4 586-1323-2 586-1309-1 586-1303-5 586-1305-0 586-1307-6 586-1319-5 586-1313-9 586-1311-3 Number Contacts 17.0 17.6 18.8 10.0 10.6 11.8 12.4 14.2 16.0 17.8 20.8 13.6 14.2 15.4 16.6 17.2 18.4 19.0 10.8 12.6 14.4 17.4 14.2 14.8 16.0 17.2 17.8 19.0 19.6 11.4 13.2 15.0 18.0
Unit: 14.83 15.43 16.63 17.83 18.43 19.63 10.23 12.03 13.83 15.63 18.63
Note: Embossed tape reel packaging(2,500 pieces/reel) Please order number reels.
BRecommended Land Metal Mask Dimensions (Lead Type)
0.7±0.05 B±0.05 (0.1) (5.2) 0.6±0.05 0.3±0.05 (Land) 0.25±0.05 (Metal mask)
3.45±0.05
(5.4)
0.3±0.05
1.25±0.05
Recommended metal mask thickness:
0.25±0.05 (Metal mask) C±0.05 (0.1) 0.6±0.05 0.3±0.05 (Land)
Lead Type
Part Number FH23-15S-0.3SHW FH23-17S-0.3SHW FH23-21S-0.3SHW FH23-25S-0.3SHW FH23-27S-0.3SHW FH23-31S-0.3SHW FH23-33S-0.3SHW FH23-39S-0.3SHW FH23-45S-0.3SHW FH23-51S-0.3SHW FH23-61S-0.3SHW 586-1317-0 586-1300-7 586-1314-1 586-1322-0 586-1308-9 586-1302-2 586-1304-8 586-1306-3 586-1318-2 586-1312-6 586-1310-0 Number Contacts 03.6 04.2 05.4 06.6 07.2 08.4 09.0 10.8 12.6 14.4 17.4 04.2 04.8 06.0 07.2 07.8 09.0 09.6 11.4 13.2 15.0 18.0
Unit: 04.8 05.4 06.6 07.8 08.4 09.6 10.2 12.0 13.8 15.6 18.6
BRecommended Land Metal Mask Dimensions (Leadless Type)
B±0.05 0.65±0.05 (4.6) 0.6±0.05 0.3±0.05(Land) 0.25±0.05(Metal mask)
2.9±0.05
0.3±0.05
(4.8)
1.25±0.05
Recommended metal mask thickness:
0.6±0.05 0.3±0.05(Land) 0.25±0.05(Metal mask) C±0.05 (0.1)
Leadless Type
Part Number FH23-15S-0.3SHAW FH23-17S-0.3SHAW FH23-21S-0.3SHAW FH23-25S-0.3SHAW FH23-27S-0.3SHAW FH23-31S-0.3SHAW FH23-33S-0.3SHAW FH23-39S-0.3SHAW FH23-45S-0.3SHAW FH23-51S-0.3SHAW FH23-61S-0.3SHAW 586-1316-7 586-1301-0 586-1315-4 586-1323-2 586-1309-1 586-1303-5 586-1305-0 586-1307-6 586-1319-5 586-1313-9 586-1311-3 Number Contacts 03.6 04.2 05.4 06.6 07.2 08.4 09.0 10.8 12.6 14.4 17.4 04.2 04.8 06.0 07.2 07.8 09.0 09.6 11.4 13.2 15.0 18.0
Unit: 04.8 05.4 06.6 07.8 08.4 09.6 10.2 12.0 13.8 15.6 18.6
BRecommended Dimensions
G±0.05 ±0.07 ±0.02 ±0.15 ±0.15 ±0.15 C±0.03 0.3±0.07
+0.04 -0.03
+0.04 -0.03
(0.07)
0.2±0.03
±0.3 (Area with removed covering layer film)
±0.15
(0.2)
(0.05) 0.6±0.02
(0.1 between conductors)
(0.2 conductor width)
0.3±0.02
B±0.03
0.6±0.07
+0.04 0.03
also permitted when drawing plated leads.
Polyamide thermally hardening adhesive recommended materials stiffener.
BPackaging Specification
qEmbossed Carrier Tape Dimensions(Tape width max.)
1.75±0.1 4±0.1 2±0.15 12±0.1
(0.5)
(1.7) (0.3)
K±0.1 (0.85) (5.1) (0.5) (2.45)
Flat surface placement with Automatic equipment
Unreeling direction
H±0.3
Part Number FH23-15S-0.3SHW FH23-15S-0.3SHAW FH23-17S-0.3SHW FH23-17S-0.3SHAW FH23-21S-0.3SHW FH23-21S-0.3SHAW FH23-25S-0.3SHW FH23-25S-0.3SHAW FH23-27S-0.3SHW FH23-27S-0.3SHAW FH23-31S-0.3SHW FH23-31S-0.3SHAW FH23-33S-0.3SHW FH23-33S-0.3SHAW FH23-39S-0.3SHW FH23-39S-0.3SHAW FH23-45S-0.3SHW FH23-45S-0.3SHAW FH23-51S-0.3SHW FH23-51S-0.3SHAW
586-1317-0 586-1316-7 586-1300-7 586-1301-0 586-1314-1 586-1315-4 586-1322-0 586-1323-2 586-1308-9 586-1309-1 586-1302-2 586-1303-5 586-1304-8 586-1305-0 586-1306-3 586-1307-6 586-1318-2 586-1319-5 586-1312-6 586-1313-9
Number Contacts
07.3
05.1 05.7 06.9 08.1 08.7 09.9 10.5 12.3 14.1 15.9
04.5 05.1 06.3 07.5 08.1 09.3 09.9 11.7 13.5 15.3
Unit:
07.5
07.9 09.1 10.3 10.9 12.1
16.5
11.5
12.7 14.5 16.3 18.1
24.5
qEmbossed Carrier Tape Dimensions(Tape width min.)
1.75±0.1 4±0.1 2±0.15 12±0.1
(1.7) (0.3)
K±0.1
+0.1
+0.15
Unreeling direction
(0.85)
(5.1)
(0.5)
Flat surface placement with Automatic equipment
(2.45)
H±0.3
J±0.1
Part Number FH23-61S-0.3SHW FH23-61S-0.3SHAW
586-1310-0 586-1311-3
Number Contacts
28.4
14.2
21.1
18.9
18.3
Unit: 32.5
qReel Dimensions
portion
Mounting portion
Lead portion (400 min.)
Blank portion pockets min.)
Embossed carrier tape
Blank portion pockets min.)
cover tape
BRecommended Temperature Profile
qUsing Conventional Solder Paste
sec. Max.
Temperature
Recommended Conditions
Reflow system Solder Test board Metal mask thickness
reflow :Paste type Sn/37 (Flux content wt%) Glass epoxy 45mm 100mm 1.6mm
sec.) Start sec. sec. Preheating sec.) sec. sec.) Soldering
Recommended temperature profile. temperature slightly changed according solder paste type thickness.
Time (Seconds)
qUsing Lead-free Solder paste
Max.
Temperature
Recommended Conditions Reflow system
reflow :Paste type Sn/0.3 Ag/0.5 (Flux content wt%) :Glass epoxy 45mm 100mm :0.1
Solder Test board Metal mask thickness
sec.) sec. sec. Preheating Start Time (Seconds)
sec.)
Recommended temperature profile. temperature slightly changed according solder paste type thickness.
Soldering
BFH23 Series Construction (Recommended Specifications)
Using Single-sided
Material Name Covering film layer. Cover adhesive Surface treatment Copper foil Base adhesive Base film Polyamide thick Tinned copper plating pure plating Material Polyamide thick. Thickness (µm)
Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total thick
Using Double-sided
Material Name Covering layer film Cover adhesive Surface treatment Through-hole copper Copper foil Base adhesive Base film Base adhesive Copper foil Cover adhesive Covering layer film Polyamide thick 1/2oz Polyamide thick Tinned copper plating pure plating 1/2oz Material Polyamide thick Thickness (µm)
Reinforcement material adhesive Heat-hardened adhesive Stiffener Polyamide Total thick
Precautions
Note Recommended specification 0.2±0.03 thick.
FPC/FFC Manufactures' Contact List
Sumitomo Bakelite Co., Ltd. Flexible Printed Circuit Board Division 5-8, Higashi-shinagawa 2-chome, Shinagawa-ku, Tokyo, Japan Fujikura Ltd. Electronics Global Marketing Department 1-5-1, Kiba, Koto-ku, Tokyo, Japan Corporation Sales Division Overseas Business Department 1-12-15, Shiba-Daimon, Minato-ku, Tokyo, Japan TEL:+81 5462 4191 FAX:+81 5462 4882 TEL:+81 5606 1165 FAX:+81 5606 1530 TEL:+81 3432 6976/8415 FAX:+81 3432 3919
BConnector Operation Precautions
Operation Termination procedure
Lift actuator. thumb index finger.
Insert with parallel mounting surface, with exposed conductive traces facing down.
conductor surface
Step
Rotate down actuator until firmly closed. NOTE: must fully inserted connector. fully inserted, actuator will close properly. Should this case, lift actuator (per Step below) repeat process (starting with Step above)
Step
Step
connectors with multiple contacts, such pos. rotate down actuator pushing both ends.
Extraction Method
Lift actuator. Carefully remove FPC.
Precautions
actuator designed withstand normal opening/closing operation. However, care should taken excessive force grasping with type tool.
actuator designed open/close max. Cycling above this cause discontinuity, damage dislocation actuator.
apply pull forces FPC, especially upward direction. needed, secure avoid transfer pull forces terminated connector.

Series qStaggered termination configuration. Only 1.25 above boar

Top Searches for this datasheet

Other recent searches