INNOVATION EXCELLENCE Dual Output Mixed Voltage, Models

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

INNOVATION EXCELLENCE Dual Output Mixed Voltage, Models

Datasheet Thumbnail

Top Searches for this datasheet

INNOVATION EXCELLENCE
Dual Output
Mixed Voltage, Models
3.3V, Watt, DC/DC Converters
Features
Regulated 3.3V outputs 6Amps/3.3V Amps capability Watts total output power No-load operation Available input voltage ranges: 10-18V, 18-36V 36-75V Small 0.45" package UL1950 EN60950 safety approvals mark available (75V-input models) Continuous short-circuit protection Fully isolated, 1500Vdc guaranteed +100°C operating temperature Input under overvoltage shutdown Output overvoltage protection Thermal shutdown
applications requiring Watts power from 3.3V, DATEL offers power sharing DC/DC converter capable meeting your output current requirements. BWR-5/6-3.3/7-D48 (36-75V input), BWR-5/6-3.3/7-D24 (18-36V input) BWR-5/6-3.3/7-D12 (10-18V input) fully isolated DC/DC converters capable delivering combination 3.3V loading combined total Watts output power. Housed standard 0.45" metal package coated with electrically nonconductive finish, these converters utilize shared control-loop system assure load regulation 3.3V output ±1.5% output. models include input filtering, input overvoltage undervoltage shutdown circuitry, output overvoltage protection, output short-circuit current limiting protection, thermal shutdown. Each design also provides trim capability on/off control function. Fully synchronous output rectification renders high efficiency no-load operation. power sharing modules offer ripple noise performance, high efficiency (88%), 1500Vdc isolation voltage, fully specified +100°C operation. These devices meet IEC950, UL1950 EN6950 safety standards, including BASIC insulation requirements "D48" models. reports available request. "D48" models marked (meet requirements).
+INPUT
OUTPUT
SWITCH CONTROL +3.3V OUTPUT
-INPUT ON/OFF CONTROL CONTROLLER
OUTPUT RETURN ACTIVE BLEEDER
OPTO ISOLATION COMPARATORS THERMAL SHUTDOWN
REFERENCE ERROR TRIM
Figure Simplified Schematic
DATEL, Inc., Mansfield, 02048 (USA) Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 Email: sales@datel.com Internet: www.datel.com
Series
LTAG
Performance Specifications Ordering Guide
VOUT (Volts)
Input Regulation (Max.) Package (Case, Pinout)
Model
BWR-5/6-3.3/7-D12 BWR-5/6-3.3/7-D24 BWR-5/6-3.3/7-D48
IOUT (Amps)
Output (mVp-p) Typ.
Max.
Line
±0.5% ±0.5% ±0.5%
Load Load
±1.5% ±1.5% ±1.5% ±2.5% ±1.5% ±2.5% ±1.5% ±2.5% ±1.5%
Nom. (Volts)
Range (Volts)
10-18 18-36 36-75
(mA)
70/3308 50/1615 25/780
Efficiency Min.
Typ.
Typical +25°C under nominal line voltage balanced "full-load" conditions 3.3A/3.3V 5A). combination 5V/3.3V rated IOUT current, exceed Watts output power. (See derating graphs.) Ripple/Noise (R/N) measured over 20MHz bandwidth. models specified with ceramic output capacitors.
Tested from load 100% load (other output load). Nominal line voltage, load/balanced full-power condition. Tested from no-load 100% load (other output no-load). Output trim impact load regulation.
Dual Output/ Mixed-Voltage Series Nominal Output Voltage: Volts Maximum Output Current: Amps Optional Functions Input Voltage Range: 10-18 Volts (12V nominal) 18-36 Volts (24V nominal) 36-75 Volts (48V nominal)
Optional Functions
Watt DC/DC's designed with On/Off Control function with positive polarity position. length: 0.110 (2.79mm) ±0.010 length: 0.145 (3.68mm) ±0.010
Refer last page additional options.
Nominal Output Voltage: Volts Maximum Output Current: Amps
2.00 (50.80) METAL CASE
0.45 (11.43)
Case
INSULATED BASE 0.20 (5.08) 0.040 ±0.002 DIA. (1.016 ±0.051)
1.800 (45.72)
0.10 (2.54)
Connections Function +Input -Input On/Off Control Output Output Return +3.3V Output Trim Notes: "D12" "D24" models case connected (-Input). "D48" models, case connected (+Input).
0.200 (5.08)
0.400 (10.16) 0.100 (2.54) BOTTOM VIEW
1.200 (30.48) 0.400 (10.16)
2.00 (50.80)
0.40 (10.16)
LTAG
Models
Performance/Functional Specifications
Typical +25°C under nominal line voltage, balanced "full-load" conditions, unless noted.
Input
Input Voltage Range: Models Models Models Overvoltage Shutdown: Models Models Models Start-Up Threshold: Models Models Models Undervoltage Shutdown: Models Models Models Input Current: Normal Operating Conditions Standby Mode: Off, Thermal Shutdown Input Reflected Ripple Current: Source Impedance Models D24/D48 Models Internal Input Filter Type Reverse-Polarity Protection: Models Models Models On/Off Control (Pin D12, Models 10-18 Volts (12V nominal) 18-36 Volts (24V nominal) 36-75 Volts (48V nominal) 19-23 Volts (21V nominal) 37-42 Volts (40V nominal) 77-81 Volts (79V nominal) 9-10 Volts (9.3V nominal) 16.5-18 Volts (17V nominal) 34-36 Volts (35V nominal) 8.5-9.6 Volts (9.3V nominal) 16-17 Volts (16.5V nominal) 32.5-35 Volts (34V nominal) Ordering Guide 10mA typical <0.1, external input filtering 200mAp-p (150mAp-p typical) 250mAp-p (225mAp-p typical) (0.022µF 4.7µH 2.46µF) minute duration, maximum minute duration, maximum minute duration, maximum open +VIN, 50µA max. 0-0.8V, max. Short Circuit Current: Output 3.3V Output Overvoltage Protection: Output 3.3V Output Maximum Capacitive Loading Models 3.3V D24, Models 3.3V
Output (continued)
Amps average, continuous Amps average, continuous Magnetic feedback volts 4.5Volts 1000µF 470µF 2000µF 1000µF
Dynamic Characteristics
Dynamic Load Response: 300µsec maximum (50-100% load step VOUT) 3.3V (50-100% load step 2.5% VOUT) 300µsec maximum Start-Up Time: VOUT On/Off VOUT Switching Frequency MTBF Models D24/D48 Models Operating Temperature (Ambient): Without Derating: Models Models Models With Derating Case Temperature: Maximum Operational Thermal Shutdown Storage Temperature Dimensions Internal Case Connection: D12/D24 Models Models Case Material 20msec maximum 15msec maximum 285kHz (±15kHz)
Environmental
Bellcore, ground fixed, full power, +25°C operating ambient temperature million hours 1.67 million hours
+50°C +60°C +68°C +100°C (See Derating Curves) +100°C +110°C minimum, +117°C maximum +120°C
Output
VOUT Accuracy: Output 3.3V Output Minimum Loading Specification Ripple/Noise (20MHz Line/Load Regulation Efficiency maximum ±1.5% maximum load, Performance Specifications Ordering Guide Ordering Guide Ordering Guide Efficiency Curves
Physical
0.45" (50.8 50.8 11.43mm) -Input (Pin +Input (Pin Corrosion resistant steel with non-conductive, epoxy-based, black enamel finish plastic baseplate Brass, solder coated ounces (76.5 grams)
Cross Regulation: Output (5V@0.6A, 3.3V@0.7-7A) maximum 3.3V Output (3.3V@0.7A, 5V@0.6-6A) ±0.5% maximum Trim Range Isolation Voltage: Input-to-Output Isolation Capacitance Isolation Resistance 1500Vdc minimum 470pF 100M
Material Weight:
Primary Secondary Insulation Level D12/D24 Models Operational Models Basic Temperature Coefficient Current Limit Inception: VOUT (3.3V 3.3V 98.5% VOUT ±0.02%/per°C 7.6-9.0 Amps 11.3-12.7 Amps
Balanced "full-load" 3.3A/3.3V models specified with external ceramic output capacitors. Technical Notes/Graphs details. Applying voltage On/Off Control (pin when input power applied converter cause permanent damage. Output noise further reduced with installation additional external output capacitors. Technical Notes. On/Off control designed driven with open collector appropriate voltage levels. Voltages must referenced input return (-Input). Demonstrated MTBF available request.
Series
LTAG
Absolute Maximum Ratings
Input Voltage: Continuous: "D12" Models "D24" Models "D48" Models Transient (100msec): "D12" Models "D24" Models "D48" Models Volts Volts Volts Volts Volts Volts Input Current must limited. minute duration. Fusing recommended. Amps Amps Amps Current limited. Devices withstand indefinite output short circuit. +VIN +120°C +300°C
Start-Up Time VOUT start-up time interval time where input voltage crosses turn-on threshold point, fully loaded output voltage enters remains within specified accuracy band. Actual measured times will vary with input source impedance, external input/output capacitance, slew rate input voltages. BWR-5/6-3.3/7 Series implements soft start circuit that limits duty cycle controller power thereby limiting Input Inrush current. On/Off Control VOUT start-up time assumes converter nominal input voltage applied turned On/Off Control pin. specification defines interval between time which converter turned fully loaded output voltage enters remains within specified accuracy band. Similar VOUT start-up, On/Off Control VOUT start-up time also governed internal soft start circuitry external load capacitance. Input Overvoltage/Undervoltage Shutdown Start-Up Threshold Under normal start-up conditions, devices will begin regulate until ramping-up input voltage exceeds Start-Up Threshold Voltage (35V "D48" models). Once operating, devices will turn until input voltage drops below Undervoltage Shutdown limit (34V "D48" models). Subsequent re-start will occur until input brought back Start-Up Threshold. This built hysteresis prevents unstable on/off situations from occurring single input voltage. Input voltages exceeding input overvoltage shutdown specification listed Performance/Functional Specifications will cause device shutdown. built-in hysteresis Volts models will allow converter restart until input voltage sufficiently reduced. On/Off Control On/Off Control (pin used remote on/off operation. shown Figure control referenced -Input (pin will internally pulled high state. standard model suffix) designed that enabled when control left open disabled when control pulled (less than +0.8V relative -Input). Dynamic control on/off function best accomplished with mechanical relay open-collector/open-drain circuit (optically isolated appropriate). drive circuit should able sink approximately logic low. on/off control function designed such that converter disabled while input power ramping then "released" once input stabilized.
+INPUT
Input Reverse-Polarity Protection "D12" Models "D24" Models "D48" Models Output Current On/Off Control (Pin Max. Voltages Referenced -Input (pin Storage Temperature Lead Temperature (Soldering, sec.)
These stress ratings. Exposure devices these conditions adversely affect long-term reliability. Proper operation under conditions other than those listed Performance/Functional Specifications Table implied, recommended.
TECHNICAL NOTES
3.3V Regulation Watt Series converters designed such that both 3.3V outputs share common regulation feedback control loop. Though feedback loop influenced both outputs, Volt output dominant. result, Volt regulation (1%) superior Volt regulation (1.5%). converters specified load regulation 100% loading no-load 100% loading. Operation below full load mandates increase regulation tolerance ±0.5% Volt output increase Volt output. slight increase switching noise also observed operation below loading. Operation with full load Volt output light load Volt output most demanding regulation. Under such conditions internal "bleeder" circuit activated provide internal load thereby keeping regulation within published specifications. bleeder activated gradually cause erratic behavior converters outputs. slight degradation efficiency will occur while this internal load activated. Filtering Noise Reduction Watt Series Converters achieve their rated ripple noise specifications with output capacitors. critical applications, input/output noise further reduced installing additional external capacitors. Input capacitors should selected bulk capacitance, high rms-ripple-current ratings. Output capacitors should selected appropriate frequency response. caps should have appropriate voltage ratings located close converter possible.
ON/OFF CONTROL
34.8k, 6.83k 100k, 9.74k 100k, 4.53k
-INPUT
Figure Internal Circuitry On/Off Control
LTAG
Models
Current Limiting When power demands from either output fall within 126% 181% rated output current, DC/DC converter will into current limiting mode. this condition both output voltages will decrease proportionately with increases output current, thereby maintaining somewhat constant power dissipation. This commonly referred power limiting (see Figures 2b). Current limit inception defined point where full-power output voltage falls below specified tolerance. load current being drawn from converter significant enough, unit will into short circuit condition. "Short Circuit Condition."
Short Circuit Condition When converter current limit mode output voltages will drop output current demand increases (see figures 2b). output voltage drops low, magnetically coupled voltage used develop primary side voltages will also drop, thereby shutting down controller. Following time-out period milliseconds, will restart, causing output voltages begin ramping their appropriate values. short-circuit condition persists, another shutdown cycle will initiated. This on/off cycling referred "hiccup" mode. hiccup cycling reduces average output current, thereby preventing internal temperatures from rising excessive levels. capable enduring indefinite short circuit output condition. Thermal Shutdown These converters equipped with Thermal Shutdown Circuitry. internal temperature DC/DC converter rises above designed operating temperature, precision temperature sensor will power down unit. When internal temperature decreases below threshold temperature sensor unit will self start.
NOM, Models D12, Models Models
Typical Current Limiting Characteristics 3.3V Output
Ouput Voltages (Volts)
Output Overvoltage Protection Both output voltages monitored overvoltage condition magnetic coupling primary side. either output voltage should rise level which could damaging load circuitry, sensing circuitry will power down controller causing output voltages decrease. Following time-out milliseconds will restart, causing output voltages ramp their appropriate values. fault condition persists, output voltages again climb excessive levels, overvoltage circuitry will initiate another shutdown cycle. This on/off cycling referred "hiccup" mode.
VOUT Average Ouput Current (Amps)
Figure Current Limiting Characteristics 3.3V Output
Typical Current Limiting Characteristics Output (3.3V Output 700mA)
Ouput Voltages (Volts) VOUT Average Ouput Current (Amps) NOM, Models D12, Models Models
Figure Current Limiting Characteristics Output
Series
LTAG
Isolation Case Connection Watt Series' 3.3V outputs (pins return (pin isolated from +VIN -VIN inputs (pins transformer opto-coupled transistor. Case connections made internal DC/DC converter. "D12 D24" cases connected -Input (pin "D48" +Input (pin Input Reverse-Polarity Protection Upon applying reverse-polarity voltage DC/DC converter, internal diode will forward biased, drawing excessive current from power source. Therefore, required that input current limited either appropriately rated input fuse current limited power source. Input Fusing Certain applications and/or safety agencies require installation fuses inputs power conversion components. Fuses should also used possibility sustained, non-current-limited, input-voltage polarity reversal exists. DATEL Watt Series Converters, slow blow fuses recommended with values greater than following. Range "D12" Models "D24" Models "D48" Models Fuse Value Amps Amps Amps
+INPUT -INPUT OUTPUT RETURN +3.3V LOAD ON/OFF CONTROL +3.3V OUTPUT TRIM +INPUT -INPUT OUTPUT LOAD OUTPUT RETURN 5-22 Turns +3.3V LOAD
ON/OFF CONTROL
+3.3V OUTPUT TRIM
Figure Trim Connections using Trimpot
OUTPUT
LOAD
TRIM DOWN
Figure Decrease Output Voltage Trim Connections Using Fixed Resistor Trim Down
recommended that fuses installed +Input line. Trimming Output Voltages These converters have trim capability (pin that allow users adjust output voltages ±5%. trim adjustment will cause equal percentage change both outputs. Adjustments output voltages accomplished trim Figure single fixed resistor shown Figures single fixed resistor increase decrease output voltage depending connection. Fixed resistors should metal-film types with absolute TCR's less than 100ppm/°C minimize sensitivity changes temperature. single resistor connected from Trim (pin +3.3V Output (pin Figure will decrease output voltages. resistor connected from Trim (pin Output Return (pin will increase output voltages. Table shows typical Trim Resistor values output voltage changes through Trim adjustment greater than have adverse affect converter's performance recommended.
RTUP RTDOWN
3.55(VO 1.273)
+INPUT -INPUT
OUTPUT
LOAD
OUTPUT RETURN
+3.3V LOAD
ON/OFF CONTROL
+3.3V OUTPUT TRIM
TRIM
Figure Increase Output Voltage Trim Connections Using Fixed Resistor Trim
4.51
Trim Down 201.5k 92.5k 56.1k 27.1k
Trim 123.7k 55.3k 32.6k 21.2k 14.3k
Note: Accuracy adjustment subject tolerances resistor values, reference accuracy factory-adjusted output accuracy. desired output voltage.
Table Percentage Output Voltage Change Trim Resistor Value (Ohms)
LTAG
Models
Typical Performance Curves Model
Input Ripple Current (VIN 18V, 3.3V@ 4.5A,
external filtering, source impedance <0.1.)
D12, D24, Models
Output Ripple Noise (PARD) (VIN nominal, 5V@3A, 3.3V 4.5A, external output capacitors.)
Output Ripple/Noise 50mV/div 20MHz 50mA/div
3.3V Output Ripple/Noise 50mV/div 20MHz
1µsec/div 1µsec/div
Model
Input Ripple Current (VIN 36V, 3.3V@ 4.5A,
external filtering, source impedance <0.1.)
Output Ripple Noise (PARD) (VIN nominal, 5V@0A, 3.3V external output capacitors.)
Output Ripple/Noise 50mV/div 20MHz
50mA/div
3.3V Output Ripple/Noise 50mV/div 20MHz
1µsec/div
1µsec/div
Model
Input Ripple Current (VIN 75V, 3.3V@ 4.5A,
external filtering, source impedance <0.1.)
Output Ripple Noise (PARD) (VIN nominal, 3.3V external output capacitors.)
Output Ripple/Noise 50mV/div 20MHz
50mA/div
3.3V Output Ripple/Noise 50mV/div 20MHz
1µsec/div
1µsec/div
Series
LTAG
Typical Performance Curves D12, D24, Models
Output Half-Load Full-Load Transient Response
(VIN nominal, 3.3V@ 700mA, external output capacitors.)
D12, D24, Models
3.3V Output Half-Load Full-Load Transient Response
(VIN nominal, 600mA, external output capacitors.)
Output 100mV/div
3.3V Output 100mV/div
Output Current 2A/div Output Current 2A/div
3.5A
100µsec/div
100µsec/div
Output Full-Load Half-Load Transient Response
(VIN nominal, 3.3V@ 700mA, external output capacitors.)
3.3V Output Full-Load Half-Load Transient Response
(VIN nominal, 600mA, external output capacitors.)
Output 100mV/div
3.3V Output 100mV/div
Output Current 2A/div Output Current 2A/div
3.5A
100µsec/div
100µsec/div
Cross Regulation Effects +3.3VOUT
(Reference Point 3.9A, 3.3V
Cross Regulation Effects +5VOUT
(Reference Point 3.3V 3.9A)
Percentage Change VOUT
3.3V 3.3V
Percentage Change VOUT
-1.0 -2.0 -3.0
3.3V -0.2 3.3V
-0.4 3.3V -0.6 Volt Output Current (Amps)
-4.0 Volt Current (Amps)
LTAG
Models
Typical Performance Curves D12, D24, Models
Start-Up from
(VIN nominal, 3.3V 4.5A, external output capacitors.)
D12, D24, Models
Start-Up from Remote On/Off Control
(VIN nominal, 3.3V 4.5A, external output capacitors.)
Output 2V/div 3.3V Output 2V/div
Output 2V/div 3.3V Output 2V/div
Remote On/Off (Pin
2msec/div
2msec/div
Models
Volt Output Efficiency Line Load (+5V 600mA)
D24, Models
D24/D48 Volt Output Efficiency Line Load (+5V 600mA)
Efficiency
Efficiency
NOMINAL
0.70 1.40 2.10 2.80 3.50 4.20 4.90 5.60 6.30 7.00 0.78 1.56 2.33 3.11 3.89 4.67 5.44 6.22 7.00 +3.3V Output Current (Amps) Volt Output Efficiency Line Load (+3.3V 700mA)
+3.3V Output Current (Amps) D24/D48 Volt Output Efficiency Line Load (+3.3V 700mA)
Efficiency
Efficiency
NOMINAL
0.60
1.20 1.80 2.40 3.00 3.60 4.20 4.80 5.40 6.00 0.67 1.33 2.00 2.67 3.33 4.00 4.67 5.33 6.00 Output Current (Amps) Output Current (Amps)
Series
LTAG
Temperature Derating Electrical Performace Curves Models
Output Power Ambient Temperature 12V, Natural Convection flow
Models
Output Power Ambient Temperature 24V, Natural Convection flow
Output Power (Watts)
Output Power (Watts)
Loading 1.98A, 3.3V Loading 3.74A, 3.3V 4.33A) Loading 5.1A, 3.3V 2.3A) Loading 3.3V 0.7A)
Loading 1.98A, 3.3V Loading 3.74A, 3.3V 4.33A) Loading 5.1A, 3.3V 2.3A) Loading 3.3V 0.7A)
Ambient Temperature (°C)
Ambient Temperature (°C)
Output Power Ambient Temperature 18V, Natural Convection flow
Output Power Ambient Temperature 36V, Natural Convection flow
Output Power (Watts)
Output Power (Watts)
Loading 1.98A, 3.3V Loading 3.74A, 3.3V 4.33A) Loading 5.1A, 3.3V 2.33A) Loading 3.3V 0.7A)
Loading 1.98A, 3.3V Loading 3.74A, 3.3V 4.33A) Loading 5.1A, 3.3V 2.3A) Loading 3.3V 0.7A)
Ambient Temperature (°C)
Ambient Temperature (°C)
Output Power Ambient Temperature Nominal, 3.74A/3.3V 4.33A
Output Power Ambient Temperature Nominal, 3.74A/3.3V 4.33A
Output Power (Watts)
Output Power (Watts)
Natural Convection FlowLoading 150lfm Flow 300lfm Flow
Natural Convection FlowLoading 150lfm Flow 300lfm Flow
Ambient Temperature (°C)
Ambient Temperature (°C)
LTAG
Models
Temperature Derating Electrical Performace Curves Models
Output Power Ambient Temperature 48V, Natural Convection flow
Output Power (Watts)
Loading 1.98A, 3.3V Loading 3.74A, 3.3V 4.33A) Loading 5.1A, 3.3V 2.33A) Loading 3.3V 0.7A)
Ambient Temperature (°C)
Output Power Ambient Temperature 75V, Natural Convection flow
Output Power (Watts)
Loading 1.98A, 3.3V Loading 3.74A, 3.3V 4.33A) Loading 5.1A, 3.3V 2.33A) Loading 3.3V 0.7A)
Ambient Temperature (°C)
Output Power Ambient Temperature Nominal, 3.74A/3.3V 4.33A
Output Power (Watts)
Natural Convection FlowLoading 150lfm Flow 300lfm Flow
Ambient Temperature (°C)
Series Options Adaptations
Optional Functions
LTAG
Model BWR-5/6-3.3/7-D48-30745
2.00 (50.08) PLASTIC CASE
dual output DC/DC converters offer mechanical options. Ordering Guide page trailing each part number pertains base part number. Part-number suffixes added after "DXX," indicating selection standard options. resulting part number "standard product" available customer desiring that particular combination options, described below. Suffix Blank Description On/Off Control function with positive polarity position. length inches (5.08 mm). Trim length 0.110 ±0.010 inches (2.79 ±0.25mm). This option requires 100-piece minimum order quantity. Trim length 0.145 ±0.010 inches (3.68 ±0.25mm). This option requires 100-piece minimum order quantity.
0.48 (12.19)
Case
0.040 ±0.001 DIA. (1.016 ±0.025) 0.20 (5.08) 1.800 (45.72) 0.10 (2.54) STANDOFF 0.020 (0.51)
0.200 (5.08)
0.100 (2.54)
Adaptations There various additional configurations available DC/DC's. Because designating each them with standard part-number suffix always feasable, such designated DATEL assigning 5-digit "adaptation code" after part-number suffixes. Once configuration been requested customer created DATEL, resulting product available customer "standard" off-the-shelf product. Contact DATEL directly interested your options/adaptations. policy minimum order quantities apply. Consequently, following product offered sale: BWR-5/6-3.3/7-D48-30745 Standard product, 48VIN, 5V/6A 3.3V/7A outputs with modified case/pin C22/P61 (LW016FA compatible), negative On/Off logic, modified Trim function 3.3VOUT trim VOUT) trimmed length 0.125 inches (3.2 mm).
0.400 (10.16)
1.200 (30.48) 0.400 (10.16)
2.00 (50.08)
0.40 (10.16)
BOTTOM VIEW
DIMENSIONS INCHES (MM)
Connections Function +Input -Input On/Off Control +3.3V Output Output Return Output +3.3V Trim
INNOVATION EXCELLENCE
9001 REGISTERED
DS-0481B
4/02
DATEL, Inc. Cabot Boulevard, Mansfield, 02048-1151 Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 Internet: www.datel.com Email: sales@datel.com
DATEL (UK) LTD. Tadley, England Tel: (01256)-880444 DATEL S.A.R.L. Montigny Bretonneux, France Tel: 01-34-60-01-01 DATEL GmbH Germany Tel: 89-544334-0 DATEL Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-6354-2025
DATEL makes representation that products circuits described herein, other technical information contained herein, will infringe upon existing future patent rights. descriptions contained herein imply granting licenses make, use, sell equipment constructed accordance therewith. Specifications subject change without notice. DATEL logo registered DATEL, Inc. trademark.

INNOVATION EXCELLENCE Dual Output Mixed Voltage, Models

Top Searches for this datasheet

Other recent searches