Download

PDF Abstract Text:

Push-Pull BNC

75W Cable Connector

Push-Pull BNC
75W Cable Connector
Chuck type strain relief
Assembly Instructions
Slide the boot onto the cable. Prepare cable as shown.
- Use an adjustable coaxial cable stripper is recommended.
C Crimp the pin. - position the pin on the center conductor - Crimp the pin with the tool
(For best crimping-results it is recommended to use the original Neutrik crimp tool - HXBNC with the corresponding insert or hexcrimp acc. to IEC 803-W (SW 1.7) or squarecrimp acc. to IEC 803-2 (SW 1.6)
Pin flush to the insulator
Inspection hole
NEUTRIK® Spanner
(HT-BNC)
D Assembled Connector E
Push the cable into the connector body until you hear a snap. Tighten the bushing.
- for stronger tightening use the Neutrik Spanner HT-BNC
Snap the sleeve onto the connector body.
NEUTRIK AG Liechtenstein
Tel.: +423 / 237 24 24 Fax: +423 / 232 53 93 www . neutrik . com
Tel.: +41 1 / 736 5010 Fax: +41 1 / 736 5011
NEUTRIK (UK) Ltd. Great Britain
Tel.: +44 19 83 / 811 441 Fax: +44 19 83 / 811 439
NEUTRIK USA INC. USA
Tel.: +1 732 / 901 9488 Fax: +1 732 / 901 9608
NEUTRIK Tokyo Ltd. Japan
Tel.: +81 3 / 3663 4733 Fax: +81 3 / 3663 4796
NEUTRIK Vertriebs GmbH Germany / Netherlands
Tel.: +49 8131 / 28 08-90 Fax: +49 8131 / 28 08-30
Draft. No.: BDA 46 / 3102M0761 Update: 21.01.2002
NEUTRIK
CONNECTING THE WORLD