The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.   United States  United States   


Datasheet Search Engine   
 
 
Part # or Description: • 5V RS232 Driver • 2SC5066* • "Real Time Clock" • "USB connector" • "blue led" 5mm • 10 watt zener diode • 2N3055* motorola
 
Search Tip: Try entering the part number only. Include a wildcard (eg. lm317* or 1n4148*)


  Datasheet Home \ Datasheet Details

Wireless, Counter, Ethernet, LED, Isolation, Watchdog Timer

Download

PDF Abstract Text:

ADAM-6050W ADAM-6051W ADAM-6060W


Wireless LAN-enabled 18-channel DI / O Module Wireless LAN-enabled 16-channel Isolated I / O with Counter Module Wireless LAN-enabled 6-channel Relay Output Module

ADAM-6050W ADAM-6051W ADAM-6060W
Wireless LAN-enabled 18-channel DI / O Module Wireless LAN-enabled 16-channel Isolated I / O with Counter Module Wireless LAN-enabled 6-channel Relay Output Module
Features
Supports IEEE802.11b wireless LAN Embedded web server with built-in web page Supports Modbus / TCP & UDP protocols Supports event trigger function
Introduction
ADAM-6050W, ADAM-6051W, and ADAM-6060W bring wireless LAN communication to your network. The hardware design of the modules were based on ADAM-6050, 6051, and 6060, but a wireless LAN interface has replaced the RJ-45 Ethernet port. With support for the common IEEE802.11b, these modules can be accessed on your wireless LAN without any hardwiring. A sensible choice for environments with wiring limitations, or expensive wiring requirements.
Specifications
General
Certifications Connectors Dimensions (WxHxD) Enclosure LAN LED Indicators Mounting Power Consumption CE, FCC class A Plug-in screw terminal block (#14 ~ 28 AWG) 70 x 112 x 25 mm ABS+PC IEEE802.11b WLAN Power, communication, signal, strength DIN 35 rail, stack, wall ADAM-6050W, ADAM-6060W: 2 W (typical) ADAM-6051W: 2.5 W Unregulated 10 ~ 30 VDC ADAM-6050W: 12 DI, 6 DO ADAM-6051W: 12 DI / 2 DO / 2 Counter ADAM-6060W: 6 DI, 6 Relay Maximum Count: 4, 294, 967, 285 (32 bit) Input frequency: 0.3 ~ 4500 Hz max. (frequency mode) 4500 Hz max. (counter mode) Modes: Counter (Up / Down, Bi-direction), Frequency Logic level 0: Close to GND Logic level 1: Open (Status inversable by utility) (ADAM-6050W and ADAM-6051W only) Logic level 0: +3 V (max.) Logic level 1: +10 to 30 V Up to 3 kHz for ADAM-6050W / 6060W Up to 4.5 kHz for ADAM-6051W Up to 3 kHz for ADAM-6050W / 6060W Up to 4.5 kHz for ADAM-6051W Open collector to 30 V, 200 mA max. load Pulse output : up to 5 kHz for ADAM-6050W and ADAM-6051W
Relay Output (Form A) Contact rating: AC: 120 V @ 0.5 A, DC: 30 V @ 1 A Breakdown voltage: 500 VAC (50 / 60 Hz) Relay on time: 7 msec Relay off time: 3 ms Total switching time: 10 ms Insulation resistance: 1 G minimum at 500 VDC
Protection
Optical Isolation ADAM-6050W: 5, 000 VRMS ADAM-6051W, ADAM-6060W: 2, 000 VRMS Power Reversal Protection
Software
Support Protocol Watchdog Timer Web Server Modbus / TCP and UDP Yes, programmable (Comm.) Embedded, with web page for configuration
Power Input
Communications
Channels
Environment
Counter
Digital Input Dry Contact: Wet Contact
Ordering Information
ADAM-6050W-A ADAM-6051W-A ADAM-6060W-A Wireless LAN-enabled 18-channel DI / O Module Wireless LAN-enabled 16-channel Isolated I / O with Counter Module Wireless LAN-enabled 6-channel Relay Output Module
Counter Mode: Frequency Mode: Digital Output
Smart Web Ethernet I / O Modules
All product specifications are subject to change without notice Last updated : 20-Jan-2006
ADAM-6050W ADAM-6051W ADAM-6060W Feature Details
Communication
ADAM-6050W, ADAM-6051W and ADAM-6060W support IEEE802.11b, so they can connect to most wireless LAN access points. Like other ADAM-6000 modules, ADAM-6050W, ADAM-6051W and ADAM-6060W also support the Modbus / TCP and UDP protocols. You can use HMI / SCADA software to communicate with the modules through Modbus / TCP. The pre-built UDP protocol supports event trigger and data streaming functions for critical and real time responses.
Home / Building Application
Embedded web server with built-in web page
The modules have an embedded web server with a built-in webpage that can be configured by an utility for: Tag Name, Status Label (for example, Start / Stop, Run / Stop, Enable / Disable and Alarm / Normal), and Channel Enable. Although it is based on Java technology, there is no need to learn how to write Java applets to design a customized web page. By using ADAM-6000 utility software, the webpage can be customized to exact requirements.
Port Crane Monitoring & Control Application
Online Download www.advantech.com / products