Simple Easy Easy operation. display incident level. Sense Di

The Datasheet Archive - 100 Million Datasheets from 7500 Manufacturers.

Simple Easy Easy operation. display incident level. Sense Di

Datasheet Thumbnail

Top Searches for this datasheet

(;1$
Simple Easy
Easy operation. display incident level.
Sense Difference, Make Difference!
Long sensing distance (200 with reflective models) double that standard E3X-NA models. High resolution times that previous models (e.g., E3X-NA11). "Easy wiring" connector. Same design E3X-DA-N Digital Fiber Amplifier.
Ordering Information: Amplifier Units, Connectors Accessories
Amplifier Units
Amplifier Units with Cables
Item Standard models High-speed detection models Mark-detecting models Water-resistant models Appearance Control output ON/OFF output Model output E3X-NA11 E3X-NA11F E3X-NAG11 E3X-NA11V output E3X-NA41 E3X-NA41F E3X-NAG41 E3X-NA41V
Amplifier Units with Connectors
Item Standard models Appearance Applicable Connector (order separately) Master Slave Water-resistant models connectors) E3X-CN11 E3X-CN12 E3X-NA14V E3X-NA44V Control output ON/OFF output Model output E3X-NA6 output E3X-NA8
XS3F-M421-40@-A XS3F-M422-40@-A
Amplifier Unit Connectors (Order Separately)
Note Stickers Connectors included accessories. Item Master Connector Slave Connector Appearance Cable length conductors Model E3X-CN11 E3X-CN12
(;1$ Combining Amplifier Units Connectors
Refer following tables when placing order. Basically, Amplifier Units Connectors sold separately.
Amplifier Units Type Standard models E3X-NA6 E3X-NA8 Applicable Connectors (Order Separately) Master Connector Slave Connector E3X-CN12 (1-wire)
E3X-CN11 (3-wire)
When Using Amplifier Units Amplifier Units Units)
Master Connector Slave Connectors
Sensor Connectors (Order Separately)
Size Cable specifications Standard cable Appearance Straight connector L-shaped connector Cable type Four-core cable Model XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A
Accessories (Order Separately)
Mounting Brackets
Appearance Applicable models E3X-NA@ E3X-NA@F E3X-NAG@ E3X-NA@V Model E39-L143 Quantity
E39-L148
Plate
Appearance Model PFP-M Quantity
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Specifications: Amplifier Units
Ratings/Characteristics
Amplifier Units with Cables Item output output Standard models E3X-NA11 E3X-NA41 (680 ±10%, ripple (p-p): max. max. max. (for 24-VDC power supply) max. High-speed detection models E3X-NA11F E3X-NA41F Mark-detecting models E3X-NAG11 E3X-NAG41 Green (520 Water-resistant models E3X-NA11V E3X-NA41V (680 Amplifier Units with Connectors Standard models E3X-NA6 E3X-NA8 Water-resistant models connectors) E3X-NA14V E3X-NA44V
Output type
Light source (wavelength) Supply voltage Current consumption
Control output Response time
NPN/PNP (depends model) open collector; load current: max.; residual voltage: max.; Light ON/Dark mode selector max. operation reset respectively (See note.) Operation: max. Reset: max. max. operation reset respectively (See note.)
Sensitivity adjustment Circuit protection
8-turn sensitivity adjuster (with indicator) Reverse polarity, output Reverse polari- Reverse polarity, output short-circuit, mutual interference prevention (optically short-circuit, mutual inter- output short- synchronized) ference prevention (opti- circuit cally synchronized) OFF-delay timer: (fixed) Incandescent lamp:10,000 max. Sunlight: 20,000 max. Operating: Groups Amplifiers: -25C Groups to11 Amplifiers: -25C Groups to16 Amplifiers: -25C (with icing condensation) Storage: -30C (with icing condensation) Operating storage: (with condensation) min. VDC) 1,000 50/60 minute with 1.5-mm double amplitude each directions m/s2, times each directions IEC60529 IP50 (with Protective Cover attached) IEC60529 IP66 (with Protective Cover attached) Approx. Polyethersulfone (PES) IEC60529 IP50 IEC60529 IP66 (with (with Protective Protective Cover atCover attached) tached) Connector Approx. Polycarbonate connector Approx. Polyethersulfone (PES) 50/60 minute
Timer function Ambient illumination (receiver side) Ambient temperature
Ambient humidity Insulation resistance Dielectric strength (destruction) Vibration resistance (destruction) Shock resistance (destruction) Enclosure rating
Connection method Weight (packed state) Material Case Cover Accessories
Pre-wired (standard cable length: Approx. Polybutylene terephthalate (PBT) Polycarbonate Instruction Sheet
Note
When there more Units mounted side-by-side, response time will max.
Amplifier Unit Connectors
Item Rated current Rated voltage Contact resistance max. mVDC max., max.) (The above figure connection Amplifier Unit adjacent Connector. does include conductor resistance cable.) times (for connection Amplifier Unit adjacent Connector) Polybutylene terephthalate (PBT) Phosphor bronze/gold-plated nickel Approx. Approx. E3X-CN11 E3X-CN12
Number insertions (destruction) Material Housing Contact Weight (packed state)
(;1$ Ordering Information: Fiber Units
Through-beam Fiber Units
Refer following table notes precautions.
Free-cut
Indicates models that allow free cutting. Models without this mark allow free cutting.
Applicable Amplifier Unit E3X-NA@ E3X-NAG@
screw
light
Standard object (see notes) (min. sensing object: opaque)
Green light
Model Permissible bending radius
Application Long distance
Features
Free-cut
Appearance
Sensing distance (mm) (Values parentheses: when using E39-F1 Lens Unit)
(2,000) (370) (600)
1.4-mm dia. (0.03-mm dia.)
E32-T11L
E3X-NA@F 3-mm dia.
Free-cut
E3X-NA@ E3X-NAG@
3-mm dia.
1.4-mm dia. (0.5-mm dia.) 1.4-mm dia. (0.03-mm dia.)
E32-T12L
E3X-NA@F
Free-cut
E3X-NA@ E3X-NAG@
screw
14,000
4,200
1.4-mm dia. (0.5-mm dia.) 0.9-mm dia. (0.03-mm dia.)
E32-T21L
E3X-NA@F 2-mm dia.; small diameter
Free-cut
E3X-NA@ E3X-NAG@
2-mm dia.
0.9-mm dia. (0.2-mm dia.) 0.9-mm dia. (0.03-mm dia.)
E32-T22L
E3X-NA@F M14; with lens; ideal explosion-proof applications Generalpurpose
Free-cut
E3X-NA@
screw
E3X-NA@F E3X-NA@ E3X-NAG@
(3,000) (550)
(900)
Free-cut
0.9-mm dia. (0.2-mm dia.) 10-mm dia. (0.1-mm dia.) 10-mm dia. (1.5-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-T17L
E32-TC200
screw
E3X-NA@F
Free-cut
E3X-NA@ E3X-NAG@
screw
(2,100) (375) (600)
1.0-mm dia. (0.2-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-T11R
E3X-NA@F 3-mm dia.
Free-cut
E3X-NA@ E3X-NAG@
3-mm dia.
1.0-mm dia. (0.2-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-T12R
E3X-NA@F possible Free-cut mount reflective side-view conversion attachment E39-F5 detecting minute sensing objects E3X-NA@ E3X-NAG@
screw
1.0-mm dia. (0.2-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-TC200A
E3X-NA@F E3X-NA@ E3X-NAG@
screw
Free-cut
1.0-mm dia. (0.2-mm dia.) 0.5-mm dia. (0.03-mm dia.)
E32-TC200E
E3X-NA@F small diameter
Free-cut
E3X-NA@ E3X-NAG@
screw
0.5-mm dia. (0.1-mm dia.) 0.5-mm dia. (0.03-mm dia.)
E32-T21R
E3X-NA@F
1.0-mm dia. (0.1-mm dia.)
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Application Thin fiber Features 2-mm dia.; detecting minute sensing objects
Free-cut
Appearance
Applicable Amplifier Unit E3X-NA@ E3X-NAG@
Sensing distance (mm) (Values parentheses: when using E39-F1 Lens Unit)
Standard object (see notes) (min. sensing object: opaque)
Model
Permissible bending radius
0.5-mm dia. (0.03-mm dia.)
E32-T22
2-mm dia.
E3X-NA@F 2-mm dia.; small diameter
Free-cut
E3X-NA@
2-mm dia.
E3X-NA@F E3X-NA@ E3X-NAG@
1.2-mm dia.; with sleeve
Free-cut
0.5-mm dia. (0.1-mm dia.) 0.5-mm dia. (0.03-mm dia.) 0.5-mm dia. (0.1-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-T22R
E32-TC200B E32-TC200B4
screw
1.2-mm dia. E32-TC200B4
E3X-NA@F E3X-NA@
0.9-mm dia.; with sleeve
Free-cut
screw 0.9-mm dia. E32-TC200F4
1.0-mm dia. (0.2-mm dia.) 0.5-mm dia. (0.03-mm dia.)
E32-TC200F E32-TC200F4
E3X-NAG@ E3X-NA@F E3X-NA@ E3X-NAG@
Flexible (resists breaking) (R4)
Ideal mounting moving sections (R4)
Free-cut
0.5-mm dia. (0.1-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-T11
screw
E3X-NA@F E3X-NA@ E3X-NAG@
screw
1.0-mm dia. (0.2-mm dia.) 0.5-mm dia. (0.03-mm dia.)
E32-T21
E3X-NA@F E3X-NA@ E3X-NAG@
1.5-mm dia.
0.5-mm dia. (0.1-mm dia.) 0.5-mm dia. (0.03-mm dia.)
E32-T22B
E3X-NA@F Sideview Long distance; space-saving
Free-cut
E3X-NA@
3-mm dia.
0.5-mm dia. (0.1-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E32-T14L
E3X-NAG@ E3X-NA@F
Space-saving
Free-cut
3-mm dia.
E3X-NA@ E3X-NA@F
Suitable detecting minute sensing objects
Free-cut
E3X-NA@
1-mm dia.
1.0-mm dia. (0.2-mm dia.) 1.0-mm dia. (0.03-mm dia.) 1.0-mm dia. (0.2-mm dia.) 0.5-mm dia. (0.03-mm dia.)
E32-T14LR
E32-T24
E3X-NAG@ E3X-NA@F
Suitable detecting minute sensing objects (small diameter) Screw-mounting type
Free-cut
1-mm dia.
E3X-NA@ E3X-NA@F
Free-cut
E3X-NA@ E3X-NAG@ E3X-NA@F
1,800
0.5-mm dia. (0.3-mm dia.) 0.5-mm dia. E32-T24R (0.03-mm dia.) 0.5-mm dia. (0.3-mm dia.) 4.0-mm dia. (0.03-mm dia.) E32-T14
4.0-mm dia. (0.2-mm dia.)
(;1$ Application Chemical-resistant Features Teflon-covered Free-cut withstands chemicals harsh environments (operating ambient temperature: -30C 70C) Appearance Applicable Amplifier Unit E3X-NA@ E3X-NAG@
5-mm dia.
Sensing distance (mm) (Values parentheses: when using E39-F1 Lens Unit)
1,600
Standard object (see notes) (min. sensing object: opaque)
Model
Permissible bending radius
4.0-mm dia. (0.2-mm dia.)
E32-T12F
E3X-NA@F E3X-NA@
5-mm dia.
4.0-mm dia. (0.7-mm dia.) 3.0-mm dia. (0.2-mm dia.)
Teflon-covered Free-cut side-view; withstands chemicals harsh environments (operating ambient temperature: -30C 70C) Teflon withstands chemicals harsh environments (operating ambient temperature: -40C 200C) Heat-resistant Resists 200C; flexible (R10); fiber sheath material: Teflon (operating ambient temperature: -40C 200C) Resists 150C Free-cut fiber sheath material: fluororesin (operating ambient temperature: -40C 150C) Resists 300C with spiral tube; high mechanical strength; fiber sheath material: stainless steel (operating ambient temperature: -40C 300C) Side-view; reFree-cut sists 150C suitable detecting minute sensing objects; fiber sheath material: fluororesin (operating ambient temperature: -40C 150C) Resists 200C L-shaped; fiber sheath material: stainless steel
E32-T14F
E3X-NAG@ E3X-NA@F E3X-NA@
3.0-mm dia. (0.7-mm dia.) 1.0-mm dia. (0.2-mm dia.) 1.0-mm dia. (0.5-mm dia.) 1.0-mm dia. (0.2-mm dia.) 1.0-mm dia. (0.5-mm dia.)
E32-T81F
6-mm dia.
E3X-NA@F E3X-NA@
E32-T81R
screw
E3X-NA@F E3X-NA@
1.5-mm dia. (0.03-mm dia.) 1.5-mm dia. (1.0-mm dia.)
E32-T51
screw
E3X-NA@F E3X-NA@
(3,000) screw
1.0-mm dia. E32-T61 (0.03-mm dia.) 1.0-mm dia. (0.5-mm dia.) 1.0-mm dia. (0.03-mm dia.)
E3X-NA@F
E3X-NA@
2-mm dia.
E32-T54
E3X-NA@F
1.0-mm dia. (0.3-mm dia.)
E3X-NA@
3-mm dia.
1.7-mm dia. E32-T84S (0.03-mm dia.) 1.7-mm dia. (0.4-mm dia.) 4.0-mm dia. (0.1-mm dia.)
E3X-NA@F Slot sen- Suitable film Free-cut sheet detection; optical axis adjustment required; easy mount E3X-NA@ E3X-NAG@ E3X-NA@F Narrow vision field Suitable detecting wafers E3X-NA@
3-mm dia.
1,000
E32-G14
4.0-mm dia. (1.0-mm dia.) 1.7-mm dia. (0.5-mm dia.)
Free-cut
E32-T22S
E3X-NA@F E3X-NA@ E3X-NA@F
Side-view; suitable detecting wafers
Free-cut
dia.
2.0-mm dia. (0.03-mm dia.) 2.0-mm dia. (0.5-mm dia.)
E32-T24S
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Application Area sensing Features Multi-point detection (4-head)
screw
Appearance
Applicable Amplifier Unit E3X-NA@ E3X-NA@F
Sensing distance (mm) (Values parentheses: when using E39-F1 Lens Unit)
Standard object (see notes) (min. sensing object: opaque)
Model
Permissible bending radius
2.0-mm dia. E32-M21 (0.03-mm dia.) 2.0-mm dia. (0.3-mm dia.)
Detects 30-mm area
Free-cut
E3X-NA@ E3X-NAG@
(0.5-mm dia.)
E32-T16W
E3X-NA@F Detects 30-mm area E3X-NA@
(4.0-mm dia.)
Free-cut
(0.5-mm dia.) (4.0-mm dia.)
E32-T16WR
E3X-NA@F
Side-view; suitable applications with limited spatial depth
Free-cut
E3X-NA@ E3X-NAG@
(0.3-mm dia.)
E32-T16J
E3X-NA@F Side-view; suitable applications with limited spatial depth Suitable detecting over 10-mm area; long distance
Free-cut
(2.0-mm dia.)
E3X-NA@ E3X-NA@F
(0.3-mm dia.) (2.0-mm dia.)
1,500
E32-T16JR
Free-cut
E3X-NA@ E3X-NAG@
(0.9-mm dia.)
E32-T16
E3X-NA@F Stable detect- Free-cut minute sensing objects wide area; degree protection: 60529 IP50 E3X-NA@ E3X-NAG@
(1.5-mm dia.)
(0.3-mm dia.)
E32-T16P
E3X-NA@F Stable detect- Free-cut minute sensing objects wide area; degree protection: IEC60529 IP50 E3X-NA@ E3X-NA@F
(2.0-mm dia.)
(0.3-mm dia.) (2.0-mm dia.)
E32-T16PR
Teflon registered trademark Dupont Company Mitsui Dupont Chemical Company their fluoride resin. continuous operation, products within temperature range -40C 130C. Indicates heat-resistant temperature fiber tip. These figures sensing distance (Diameters sensing objects ones stationary state.) Note: size standard sensing object same fiber core diameter (lens diameter models with lens). values minimum sensing object E3X-NA@ E3X-NAG@ through-beam models indicate those obtained where sensing distance sensitivity optimum values. value minimum sensing object E3X-NA@F through-beam models indicates that obtained rated sensing distance with sensitivity optimum value.
(;1$ Fiber Units with Reflective Sensors
Refer following table notes precautions.
Free-cut
Indicates models that allow free cutting. Models without this mark allow free cutting.
Applicable Amplifier Unit E3X-NA@ E3X-NAG@
screw
light
Standard object (see note) (min. sensing object: Gold wire)
Green light
Model Permissible bending radius
Application Long distance
Features
Appearance
Sensing distance (mm)
Free-cut
250250 (0.01-mm dia.) 5050 (0.1-mm dia.) 100100 (0.015-mm dia.) 150150 (0.01-mm dia.) 2525 (0.1-mm dia.) 5050 (0.015-mm dia.) 100100 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.015-mm dia.) 100100 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.015-mm dia.)
E32-D11L
E3X-NA@F 3-mm dia.; small diameter E3X-NA@ E3X-NAG@
3-mm dia.
Free-cut
E32-D12
E3X-NA@F E3X-NA@ E3X-NAG@
screw
Free-cut
E32-D21L
E3X-NA@F 3-mm dia.; small diameter E3X-NA@ E3X-NAG@
3-mm dia.
Free-cut
E32-D22L
E3X-NA@F Generalpurpose E3X-NA@ E3X-NAG@
screw
Free-cut
200200 (0.01-mm dia.) 5050 (0.1-mm dia.) 7575 (0.015-mm dia.) 150150 (0.01-mm dia.) 2525 (0.1-mm dia.) 5050 (0.02-mm dia.) 150150 (0.01-mm dia.) 2525 (0.1-mm dia.) 5050 (0.02-mm dia.) 5050 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.02-mm dia.) 2525 (0.01-mm dia.) 2525 (0.03-mm dia.) 2525 (0.01-mm dia.) 2525 (0.03-mm dia.)
E32-DC200
E3X-NA@F E3X-NA@ E3X-NAG@
screw
Free-cut
E32-D11R
E3X-NA@F 3-mm dia. E3X-NA@ E3X-NAG@
3-mm dia.
Free-cut
E32-D12R
E3X-NA@F small diameter E3X-NA@ E3X-NAG@ E3X-NA@F small diameter E3X-NA@
screw
Free-cut
E32-DC200E
screw
Free-cut
E32-D21R
E3X-NA@F E3X-NA@
3-mm dia.; small diameter
Free-cut
E32-D22R
3-mm dia.
E3X-NA@F
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Application Thin fiber Features 2.5-mm dia.; with sleeve Appearance Applicable Amplifier Unit E3X-NA@
Sensing distance (mm)
Standard object (see note) (min. sensing object: Gold wire)
Model
Permissible bending radius
Free-cut
200200 (0.01-mm dia.) 5050 (0.1-mm dia.) 7575 (0.015-mm dia.) 5050 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.02-mm dia.) 2525 (0.01-mm dia.) 2525 (0.03-mm dia.) 2525 (0.01-mm dia.) 2525 (0.05-mm dia.)
E32-DC200B E32-DC200B4
E3X-NAG@
screw 2.5-mm dia. E32-DC200B4
E3X-NA@F E3X-NA@
1.2-mm dia.; with sleeve
Free-cut
E32-DC200F E32-DC200F4
E3X-NAG@
screw 1.2-mm dia. E32-DC200F4
E3X-NA@F E3X-NA@
0.8-mm dia.; detecting minute sensing objects
Free-cut
3-mm dia. 0.8-mm dia.
E32-D33
E3X-NA@F E3X-NA@ E3X-NA@F E3X-NA@ E3X-NAG@
0.5-mm dia.; detecting minute sensing objects
0.5-mm dia. 2-mm dia.
E32-D331
Flexible (resists breaking) (R4)
Ideal mounting moving sections (R4)
Free-cut
150150 (0.01-mm dia.) 2525 (0.1-mm dia.) 5050 (0.015-mm dia.) 2525 (0.01-mm dia.) 2525 (0.02-mm dia.)
E32-D11
screw
E3X-NA@F E3X-NA@
Free-cut
E32-D21
screw
E3X-NA@F E3X-NA@ E3X-NAG@
2525 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.02-mm dia.) 2525 (0.01-mm dia.) 2525 (0.02-mm dia.)
E32-D21B
Free-cut
screw
E3X-NA@F E3X-NA@
1.5-mm dia.
E32-D22B
E3X-NA@F
(;1$ Application Coaxial Features coaxial; high-precision positioning Appearance Applicable Amplifier Unit E3X-NA@ E3X-NAG@
screw
Sensing distance (mm)
Standard object (see note) (min. sensing object: Gold wire)
Model
Permissible bending radius
Free-cut
200200 (0.01-mm dia.) 5050 (0.1-mm dia.) 7575 (0.015-mm dia.)
E32-CC200
E3X-NA@F 3-mm dia. coaxi- Free-cut small diameter; highprecision positioning
3-mm dia.
E3X-NA@ E3X-NAG@ E3X-NA@F
100100 (0.01-mm dia.) 2525 (0.1-mm dia.) 5050 (0.02-mm dia.) 5050 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.02-mm dia.) 2525 (0.01-mm dia.) 2525 (0.02-mm dia.)
E32-D32L
coaxial; Free-cut high-precision positioning; possible mount smallspot lens (E39-F3A-5/ F3B/F3C)
E3X-NA@ E3X-NAG@ E3X-NA@F E3X-NA@
screw
E32-C31
screw
coaxial; high-precision positioning; possible mount small-spot lens (E39-F3A-5/F3B/F3C)
E32-C41
E3X-NA@F E3X-NA@
2-mm dia. coaxial; highprecision positioning; possible mount smallspot (0.1 dia.) lens (E39-F3A)
2525 (0.01-mm dia.) 2525 (0.02-mm dia.)
E32-C42
2-mm dia.
E3X-NA@F
2-mm dia. coaxi- Free-cut high-precision positioning; possible mount small-spot (0.5 dia.) lens (E39-F3A)
E3X-NA@ E3X-NAG@
2-mm dia.
5050 (0.01-mm dia.) 2525 (0.1-mm dia.) 2525 (0.02-mm dia.) 5050 (0.03-mm dia.) 2525 (0.3-mm dia.) 2525 (0.03-mm dia.) 2525 (0.03-mm dia.)
E32-D32
E3X-NA@F E3X-NA@
6-mm dia.
Sideview
6-mm dia.; long distance
Free-cut
E32-D14L
E3X-NAG@ E3X-NA@F
6-mm dia.
Free-cut
E3X-NA@
6-mm dia.
E32-D14LR
E3X-NA@F 2-mm dia.; small diameter spacesaving
Free-cut
E3X-NA@
2-mm dia.
2525 (0.03-mm dia.) 2525 (0.3-mm dia.) 2525 (0.03-mm dia.) 2525 (0.03-mm dia.)
E32-D24
E3X-NAG@ E3X-NA@F
2-mm dia.; small diameter spacesaving
Free-cut
E3X-NA@
2-mm dia.
E32-D24R
E3X-NA@F E3X-NA@ E3X-NAG@
6-mm dia.
Chemical-resistant
Teflon-covered Free-cut withstands chemicals harsh environments (operating ambient temperature: -30C 70C)
100100 (0.03-mm dia.) 2525 (0.3-mm dia.) 2525 (0.03-mm dia.)
E32-D12F
E3X-NA@F
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Application Heat-resistant Features Resists 150C Free-cut fiber sheath material: fluororesin (operating ambient temperature: -40C 150C) Resists 300C fiber sheath material: stainless steel (operating ambient temperature: -40C 300C) Resists 400C fiber sheath material: stainless steel (operating ambient temperature: -40C 400C) Appearance Applicable Amplifier Unit E3X-NA@
screw
Sensing distance (mm)
Standard object (see note) (min. sensing object: Gold wire)
Model
Permissible bending radius
150150 (0.03-mm dia.) 5050 (0.03-mm dia.) 100100 (0.03-mm dia.) 2525 (0.03-mm dia.) 5050 (0.03-mm dia.)
E32-D51
E3X-NA@F E3X-NA@
E32-D61
screw
E3X-NA@F E3X-NA@
E32-D73
1.25-mm dia. screw
E3X-NA@F
2525 (0.03-mm dia.)
Area sensing
Side-view; detection over wide areas
Free-cut
E3X-NA@ E3X-NA@F
screw Reflector E39-R3
100100 (0.03-mm dia.) 5050 (0.03-mm dia.)
1,500 1,000
E32-D36P1
Retroreflective
Transparent object detection
Free-cut
E3X-NA@ E3X-NA@F E3X-NA@
35-mm dia. (0.3-mm dia.) 35-mm dia. (0.5-mm dia.) 35-mm dia. (0.6-mm dia.) 35-mm dia. (4.0-mm dia.)
E32-R21 +E39-R3 (Attachment)
Transparent Free-cut ject detection (operating ambient temperature: -25C 55C); degree protection: 60529 IP66 Limited reflective Suitable positioning crystal glass
Free-cut
E32-R16 +E39-R1 (Attachment)
Reflector E39-R1
E3X-NA@F
E3X-NA@ E3X-NA@F E3X-NA@ E3X-NA@F E3X-NA@ E3X-NA@F
to12 to12 7.2±1.8 7.2±1.8
E32-L56E1 E32-L56E2
Detects wafers Free-cut small differences height; (operating ambient temperature: -40C 105C); degree protection: 60529 IP50
2525 (0.015-mm dia.) 2525 (0.03-mm dia.) 2525 (0.015-mm dia.) 2525 (0.03-mm dia.) 2525 (0.015-mm dia.) 2525 (0.03-mm dia.) 2525 (0.015-mm dia.) 2525 (0.03-mm dia.)
E32-L24L
E32-L25L
Detects wafers Free-cut small differences height; degree protection: 60529 IP50
E3X-NA@ E3X-NA@F E3X-NA@ E3X-NA@F
E32-L25
E32-L25A
Fluidlevel detection
Fluid contact type: unbendable section L=150 (two types) Tube-mounting type
Free-cut
E3X-NA@
E32-D82F1 E32-D82F2
E3X-NA@F E3X-NA@ -E3X-NA@F
E32-L25T
Sensing distance indicates values white paper. continuous operation, products within temperature range -40C 130C. Teflon registered trademark Dupont Company Mitsui Dupont Chemical Company their fluoride resin. Indicates heat-resistant temperature fiber tip. Note values minimum sensing object indicate those obtained distance where smallest object sensed with Reflective Fiber Unit.
(;1$ Operation
Output Circuits
Output Model E3X-NA11 E3X-NA6 E3X-NAG11 E3X-NA11F E3X-NA11V E3X-NA14V Mode selector LIGHT (L/ON) Timing chart
Incident light incident light Operation indicator (orange) Output transistor Load (relay) Operate Release (Between brown black)
State output transistor Light
Operation indicator (orange) Photoelectric Sensor main circuit
Output circuit
Brown
Load Black
Control output
Blue
DARK (D/ON)
Incident light incident light Operation indicator (orange) Output transistor Load (relay)
Dark
Connector Arrangement
Operate Release (Between brown black)
Note
Light
used.
Brown
E3X-NA41 E3X-NA8 E3X-NAG41 E3X-NA41F E3X-NA41V E3X-NA44V
LIGHT (L/ON)
Incident light incident light Operation indicator (orange) Output transistor Load (relay)
Operate Release (Between brown black)
Operation indicator (orange) Photoelectric Sensor main circuit
Black
Control output Load
Blue
DARK (D/ON)
Incident light incident light Operation indicator (orange) Output transistor Load (relay)
Dark
Connector Arrangement
Operate Release (Between brown black
Note
used.
Connectors (Sensor Connectors)
Terminal number
Color cable conductors
Brown White Blue Black
Classification
Color cable conductors Brown White
Connection number
Application Power supply (+V) -Power supply Output
XS3F-M421-402-A, XS3F-M422-402-A XS3F-M421-405-A, XS3F-M422-405-A
Blue Black Note used.
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Engineering Data (Typical)
Parallel Operating Range
max. sensitivity. (Use optical axis adjustment installation.)
Distance (mm)
Distance (mm)
Distance (mm)
E32-TC200
E3X-NAG@
-100 -200
E32-T11L/T12L
E32-T11R
E3X-NAG@
E3X-NAG@
Distance
-100
Distance E3X-NA@F
Distance
-100
E3X-NA@F
-300
E3X-NA@
-200
E3X-NA@
-300
-150 -200
E3X-NA@F
E3X-NA@
E32-T11
Distance (mm)
-100 -150 -200
E32-TC200E
Distance (mm)
E3X-NAG@
E32-T24S
Distance (mm)
E3X-NAG@
Distance E3X-NA@F
Distance (mm)
Distance
E3X-NA@
E3X-NA@F
E3X-NA@
E3X-NA@F
E3X-NA@
Operating Range
With standard sensing object max. sensitivity. (Use positioning object Sensor.)
E32-DC200
Distance (mm)
E32-D11L
Distance (mm)
E32-D11R/D12R
Distance (mm)
E3X-NAG@
E3X-NAG@
E3X-NAG@
-100 -150
Distance (mm)
Distance (mm)
Distance (mm)
E3X-NA@F E3X-NA@
-100 -150
E3X-NA@F E3X-NA@
E3X-NA@F
E3X-NA@
E32-DC200E
Distance (mm)
Distance (mm)
Distance (mm)
E32-D33
E32-L25L
E3X-NA@F
E3X-NAG@
E3X-NA@F
Distance (mm)
Distance (mm)
-0.5
Distance (mm)
E3X-NA@
E3X-NA@F
E3X-NA@
E3X-NA@
(;1$ Number Turns Sensitivity Adjuster Sensing Distance
E32-T11L
Distance
E32-D11L
Distance (mm)
E3X-NA@
E3X-NA@
E3X-NA@F
Number turn
Number turns
Sensing Distance Hysteresis
E32-T11L
Hysteresis (mm)
E32-D11L
Hysteresis (mm)
E3X-NA@
E3X-NA@
Distance (mm)
Distance (mm)
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Application
Wiring Precautions
Read following before using Amplifier Unit Sensor ensure safety.
Power Supply Voltage
impose voltage exceeding rated voltage E3XNA. impose power (100 VAC) models that operate with both cases, E3X-NA rupture burn.
No-load Operation
load must connected E3X-NA during operation, otherwise internal elements rupture burn. Always wire through load.
Load Short-circuits
short-circuit load connected E3X-NA, otherwise E3X-NA rupture burn.
Operating Environment
Amplifier Unit Sensor places with flammable explosive gas. Amplifier Unit Sensor underwater. disassemble, repair, modify Amplifier Unit Sensor.
Polarity
When supplying power E3X-NA, make sure that polarity power correct, otherwise E3X-NA rupture burn.
Amplifier Units
Nomenclature
Sensitivity indicator 8-turn sensitivity adjuster
Wiring
Cable cable extended, provided that extension wire applied least thick total distance more than pull cable with force exceeding 30N.
Operation Mode Selector switch between Light Dark modes. Timer switch Timer function OFF: Timer function OFF.
Separation from Power High-tension Lines wire power lines high-tension lines alongside lines Amplifier Unit same conduit, otherwise Amplifier Unit damaged malfunction induction. sure wire lines Amplifier Unit separated possible from power lines high-tension lines laid exclusive, shielded conduit.
Lock Button
Incident level indicators Operation Indicator
Installation
Turning Power Sensor ready operate within after power supply turned Sensor load connected power supplies separately, sure turn power supply Sensor first. Turning Power Pulses output when power turned OFF. Always turn power load load line first. Power Supply Type full half-wave rectifying power supply without smoothing circuit cannot used. Communications Hole hole side Amplifier Unit communications hole preventing mutual interference when Amplifier Units mounted side-by-side. E3X-MC11 Mobile Console (sold separately) cannot used. excessive amount light received Sensor, mutual interference prevention function work. this case, make appropriate adjustments using sensitivity adjuster. mutual interference prevention function will operate when E3X-NA used side-by-side with E3X-DA-N models.
Power line
Incorrect
Power Supply standard switching regulator used power supply, frame ground (FG) terminal ground terminal must grounded, otherwise faulty operation result from switching noise power supply. Metal Connectors (Water-resistant Models) Turn power before inserting removing connector. Hold connector cover when inserting removing connector. Tighten fixing screws hand. Using tools such pliers cause damage. applicable tightening torque range tightening insufficient, enclosure rating maintained, vibrations cause connector come loose.
(;1$ Mounting
Joining Amplifier Units Mount Amplifier Units time onto track.
Plain washers (6-mm dia. max.)
Adjustment
Indicators Slide Amplifier Units together, line clips, press Amplifier Units together until they click into place. addition operation indicator (orange), E3X-NA also incident level indicators green red). these indicators optical axis adjustments maintenance. Status indicators L/ON mode)
Operation indicator Incident level indicators
Clip
Click into place
Operation indicator L/ON mode)
Incident level
Separating Amplifier Units Slide Amplifier Units away from each other, remove from track time. attempt remove Amplifier Units from track without separating them first.) Note: specifications ambient temperature will vary according number Amplifier Units used together. details, refer Ratings/Characteristics. Always turn power supply before joining separating Amplifier Units. Mounting Mount front part mounting bracket (ordered separately) track. Press back part onto mounting bracket track. Note mount back Amplifier Unit onto mounting bracket track first, otherwise mounting strength Amplifier Unit reduced. Always mount front Amplifier Unit first.
(See note.)
Approx. max. operating level
Approx. operating level
Approx. 110% operating level
Approx. 110% 120% operating level
Approx. 120% min. operating level
Note
track
rightmost indicator will even incident level
Operating Environment
Ambient Conditions dust dirt adhere hole optical communications, prevent normal communications. sure remove dust dirt before using Units.
Dismounting pressing Amplifier Unit direction lifting fiber insertion part direction shown following diagram, Amplifier Unit dismounted with ease.
Miscellaneous
Ratings Specifications ratings performance specifications items such minimum sensing object characteristics based products taken random from certain production lots. this data reference only.
track
Protective Cover sure mount Protective Cover before use.
When side-mounting using mounting bracket, secure mounting bracket Amplifier Unit then mount using screws. plain washers diameter less when mounting.
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Fiber Unit
Mounting
Tightening Force tightening force applied Fiber Unit should follows: Disconnection Remove protective cover raise lock button pull fiber.
Screw-mounting Model
Spring mounting clip Toothed washers
Cylindrical Model
Retaining screw (flat head sunken head) max.) Locked Unlocked Protective cover
Nuts (attachment)
Note Fiber Units M3/M4 screw screw/ 6-mm dia. cylinder 1.5-mm dia. cylinder 2-mm dia./3-mm dia. cylinder E32-T12F 5-mm dia. Teflon model E32-D12F 6-mm dia. Teflon model E32-T16 E32-R21 E32-M21 E32-L25A E32-T16P E32-T16PR E32-T24S E32-L24L E32-L25L E32-T16J E32-T16JR E32-T16W E32-T16WR Clamping torque 0.78 max. 0.98 max. max. 0.29 max.
maintain fiber properties, confirm that lock released before removing fiber.
Precautions Fiber Connection/Disconnection sure lock unlock lock button within ambient temperature range between -10C 40C.
Cutting Fiber
Insert fiber into Fiber Cutter determine length fiber cut.
0.78 max. 0.49 max. 0.59 max. tip: 0.49 max. More than from tip: 0.78 max. 0.78 max.
Press down Fiber Cutter single stroke fiber. cutting holes cannot used twice. same hole used twice, cutting face fiber will rough sensing distance will reduced. Always unused hole. thin fiber follows: attachment temporarily fitted thin fiber before shipment.
Thin fiber attachment (E39-F9)
0.29 max.
Temporarily fitted
max.
Secure attachment after adjusting position direction indicated arrow.
proper-sized wrench.
Insert fiber into E39-F4.
Fiber Connection Disconnection
Amplifier Unit lock button. Connect disconnect fibers from Amplifier Unit using following procedures: Connection Open protective cover, insert fibers according fiber insertion marks side Amplifier Unit, lower lock button.
Lock button Insertion position
Cutter (E39-F4) holes thin fiber Three holes standard fiber (2.2-mm dia.)
Finished state (proper cutting state)
Approx.
Insertion direction
Note
Insert fiber direction indicated arrow.
Fiber
Fiber insertion mark
10.7
(;1$ Connection
pull press Fiber Units. Fiber Units have withstand force 29.4 maximum (pay utmost attention because fibers thin). bend Fiber Unit beyond permissible bending radius given under Specifications: Amplifier Units page bend edge Fiber Units (excluding E32-T@R E32-D@R).
Bending Radius
E39-F11 Sleeve Bender bending radius stainless steel tube should large possible. smaller bending radius becomes, shorter sensing distance will Insert stainless steel tube Sleeve Bender bend stainless steel tube slowly along curve Sleeve Bender (refer figure).
1.2-mm dia. max. 1.3-mm dia. min.
Correct
min.
Incorrect
Amplifier Unit
Fiber Unit
12.5 Fiber position mark
min.
apply excess force Fiber Units.
Stainless steel tube
max.
Correct
Fiber Unit Nylon wireholder
Incorrect
bend here.
Fiber Head could broken excessive vibration. prevent this, following effective:
one-turn loop absorb vibrations.
Tape
Amplifier Units with Connectors
Mounting
Mounting Connectors Insert Master Slave Connector into Amplifier Unit until clicks into place. Removing Connectors Slide slave Amplifier Unit which Connector removed away from rest group. After Amplifier Unit been separated, press down lever Connector remove attempt remove Connectors without separating them from other Amplifier Units first.)
Press down Lever
Insert
Join Amplifier Units together required after Master Slave Connectors have been inserted. Attach stickers (provided accessories) sides Master Slave Connectors that connected other Connectors. Mounting Plate (PFP-M)
Remove
Depending mounted, Amplifier Unit move during operation. this case, Plate. Before mounting Plate, remove clip from master Amplifier Unit using nipper similar tool.
Sticker
Sticker
Note
Attach stickers sides with grooves.
Clip
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
clip also removed using following mechanism, which incorporated construction section underneath clip. Insert clip removed into slit underneath clip another Amplifier Unit. Remove clip rotating Amplifier Unit.
Rotate
Pull Strengths Connectors (Including Cables) E3X-CN11: max. E3X-CN12: max.
Reflector
E39-R3 Reflector
detergent, etc., remove dust from surfaces where tape applied. Adhesive tape will attached properly dust remains surface. E39-R3 cannot used places where exposed chemicals. Secure Protective Spiral Tube suitable place with attached nut.
Mounting panel Hexagon clamping
E39-F32@ Protective Spiral Tubes
Insert fiber Protective Spiral Tube from head connector side (screwed) tube.
Fiber Unit Protective Spiral Tube Toothed washer
Protective Spiral Tube
attached saddle secure Protective Spiral Tube. secure Protective Spiral Tube position other than cap, apply tape tube that portion becomes thicker diameter.
Fiber Unit
Push fiber into Protective Spiral Tube. tube should straight that fiber twisted when inserted. Then turn spiral tube.
Saddle Tube Protective Spiral Tube Fiber Unit
E39-F10 Fiber Connector
Mount Fiber Connector shown following illustrations.
Splice Fiber Unit Retention unit Retention unit Fiber Unit
Fiber Unit
Fiber Unit
Fiber Units should close possible when they connected. Sensing distance will reduced approximately when fibers connected. Only 2.2-mm-dia. fibers connected.
(;1$ Dimensions
Note units millimeters unless otherwise indicated.
Amplifier Units
Amplifier Units with Cables (with Mounting Bracket Attached)
Incident level indicators (See note Operation indicator
E3X-NA11 E3X-NA11F E3X-NA41 E3X-NA41F E3X-NAG11 E3X-NAG41
Two, dia.
Cable (See note
13.05 15.75
64.3 38.6
Mounting Holes
31.5 10.7 22.4 34.8 10.75
Two,
Hole optical communications (See note
Two, dia. holes
Mounting bracket (E39-L143) (Order separately) Stainless steel (SUS304)
22.4
Note:
mounting bracket also used side With these models, 4-dia., 3-conductor, vinyl-insulated round cable (conductor cross-sectional area: mm2; insulation diameter: used. Standard length:
hole optical communications preventing mutual interference. There hole E3X-NA@F models.
Amplifier Units with Cables, Water-resistant Models (with Mounting Bracket Attached)
E3X-NA11V E3X-NA41V
28.65 25.95
(See note
Operation indicator Incident level indicators
81.5
(See note
Two, dia.
10.7 11.2
11.5
23.9 14.4 23.9
67.2
Hole optical communications
Mounting Holes
Two,
Mounting bracket (E39-L148) (Order separately) Stainless steel (SUS304)
Note:
mounting bracket also used side
With these models, 4-dia., 3-conductor, vinyl-insulated round cable (conductor cross-sectional area: mm2; insulation diameter: used. Standard length:
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Amplifier Units with Connectors
Incident level indicators
E3X-NA6 E3X-NA8
Operation indicator
13.05 15.75
64.3
Two, dia.
10.7 38.6 36.7
31.5
Hole optical communications (for preventing mutual interference)
Dimensions with Master Connector Connected
67.5 64.3
Dimensions with Slave Connector Connected
67.5 64.3
31.5
E3XCN11: dia.
E3X-CN12: dia.
31.5 17.45 12.95 11.55
12.95
Amplifier Units with Connectors, Water-resistant Models (with Mounting Bracket Attached)
E3X-NA14V E3X-NA44V
28.65 25.95
Operation indicator Incident level indicators
mounting bracket also used this side.
81.5
Two, dia.
10.7 11.2
11.5
23.9 14.4
67.2
Hole optical communications
Mounting Holes
Two,
23.9
Mounting bracket (E39-L148) (Order separately) Stainless steel (SUS304)
(;1$ Amplifier Unit Connectors
Master Connectors E3X-CN11
2,000 10.7
note. dia.
14.4
15.1
30±2
10±2
Note: 4-dia., 3-conductor, vinyl-insulated round cable (conductor cross-sectional area: mm2; insulation diameter: used.
Slave Connectors E3X-CN12
10.7
2,000
note. dia.
14.4
15.1
30±2
10±2
Note: 2.6-dia., single-conductor, vinyl-insulated round cable (conductor cross-sectional area: mm2; insulation diameter: used.
Sensor Connectors
Straight Connector Cable) XS3F-M421-402-A (L=2 XS3F-M421-405-A (L=5
2.15 12.9 dia. 1.95 21.5 31.4 dia.
L-shaped Connector Cable) XS3F-M422-402-A (L=2 XS3F-M422-405-A (L=5
23.1
20.5 dia.
dia. 2.15 1.95
6XSHU 0DQXDO )LEHU $PSOLILHU (;1$
Accessories (Order Separately)
Mounting Bracket E3X-NA@, E3X-NA@F, E3X-NAG@ Models
E39-L143
(10.3) 26.8 16±0.1 34.8
Mounting Holes
Two,
Two, dia.
Material: Stainless steel (SUS 304)
10.3 max.
Four, R1.7
Mounting Bracket E3X-NA@V Models
E39-L148
max. Two, dia. R1.7 R1.7
Mounting Holes
Two,
Material: Stainless steel (SUS 304)
Plate
PFP-M
11.5
pan-head screw
spring washer
35.5 35.3
(;1$
DIMENSIONS SHOWN MILLIMETERS.
convert millimeters into inches, multiply 0.03937. convert grams into ounces, multiply 0.03527.
Cat. E318-E1-02A
interest product improvement, specifications subject change without notice.
OMRON Corporation
Industrial Automation Company Application Sensors Division Sensing Devices Components Division H.Q. Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Tel: (81)75-344-7068/Fax: (81)75-344-7107
Printed Japan 0102-2M (0601)

Simple Easy Easy operation. display incident level. Sense Di

Top Searches for this datasheet

Other recent searches