Components around transceivers classified into four families: filterin
|
|
|
Top Searches for this datasheet
AT86RF211S Transceiver Radio Applications Application Requirements
Components around transceivers classified into four families: filtering out-of-band high-level jamming such pagers' Base Stations portable phones. These most expensive parts (e.g. SAW). filtering protect against other users bands. They cheap multisource. Filtering decoupling power supplies. These always very cheap (resistors, capacitors). passive components antenna matching, loop filtering.
SmartRF Series Application Note
Thanks AT86RF211S' very high level integration (including inductor varactor), critical components have added outside chip. Such super-heterodyne device very flexible allows achieve cost standard applications, well high performances (immunity, selectivity, etc.) industrial systems: external filters removed/chosen according performance requirements. There wide variety filters, with various bandwidths costs (simpler filters with discrete components also possible) meet requirement. same layout used several applications (unique platform). This allows adapt performance requirements with minimal design efforts resulting very short time-to-market.
Rev. 5305C-WIRE-10/04
Possible Configurations
This table sums possible configurations chip relation performances required.
Table Possible Configurations
Configuration Name Conducted Sensitivity [dBm] Typ. [kHz] Immunity Typical Without Open Field Shielding(1) Range(5) Boards Available Quick Design Start Features filter Printed antenna inductors 150(9) 200m (Room) area filter printed antenna AT86RF211SDB433TRI(10) 868, kbps) Part Numbers AT86RF211SDBBIBAND(2) Designed Band(s) kbps)
Standard cost volume
-93(6)
-93(6) -103 -106(6) High sensitivity medium wide channels -100 -103(6) -102(6) -103
150(9) 150(9)
filter Wire antenna printed inductors filter Wire antenna printed inductors 400m (Home) area filter Wire antenna printed inductors ceramic filter filter Printed antenna inductors filter filter Wire antenna filter Wire antenna ceramic filter filter Wire antenna filter filter Wire antenna 1000m (more than home) area filter Wire antenna ceramic filter filter Wire antenna filter AT86RF211SDB433107(4) AT86RF211SDB868107(4) AT86RF211SDB915107(4) 19.2 kbps) AT86RF211SDB868LNA(3) AT86RF211SDB915LNA(3) kbps)
150(9)
35(8)
High sensitivity High selectivity (Narrow band)
-100
35(8)
400m (Home) area
35(8)
-114(7) Very high sensitivity High selectivity (Narrow band)
35(8)
-111(7)
35(8)
-110(7)
Notes:
35(8)
intrinsic immunity RF211S (high level integration, architecture, etc.) makes capable meeting immunity requirements V/m) with filter shielding. corresponds European standards. "AT86RF211SDBBIBAND: Standard Dual-band Board with Printed Antenna Inductors" page "AT86RF211SDBxxxLNA: High Sensitivity/Medium Wide Channels Board with Printed Antenna Inductors" page "AT86RF211SDBxxx107: High Sensitivity/High Selectivity Board (Narrow Band)" page "AT86RF211SDBxxxLT: High Sensitivity/High Selectivity Board (Narrow Band)" page also available with same performance (features lead-through components cost reduction). range (even measured open field) always difficult guarantee since depends many parameters: sofware used, choice criteria link (e.g. Error Rate), nature measurement field (ground, obstacles, antennas), shape product, etc. 3-400m generally required applications within home. Values given typical bands. 400-450 one, range more than twice given value. Using inductors instead printed ones. Also leads power. Values given with typical (-120 achievable with very narrowband filters). filters from available. filters from available. triband board populated factory use. procedure switch described Note page
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Boards Available Quick Design Start
following sections describe boards listed Table page
AT86RF211SDBBIBAND: Standard Dual-band Board with Printed Antenna Inductors
Description piece hardware 868/915 applications. Adjustable antenna (C43 mounted applications). EIRP must reduced software meet standards (TXLVL CTRL1) frequency hopping implemented (FCC requirement).
Since radiated power vary with environment core, actual value TXLVL should checked during final testing (010 corresponds board mounted development mother board).
Note:
Compliance Standards
ETSI EN300-220 configuration. requirements, tested AT86RF211S Kit. Part configuration.
Figure AT86RF211SDBBIBAND Board
Available Documentation
"Schematics Board Layout" page "Bill Material" page which includes component manufacturers full part numbers.
Information Notes
part numbers given indicative; they change without notice. Gerber files this design available, please your local Atmel FAE. wired antenna easily mounted increase range. components area delimited blank line related part.
5305C-WIRE-10/04
Schematics Board Layout
Figure AT86RF211SDBBIBAND Component Placement
Figure AT86RF211SDBBIBAND Layout Ground
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Figure AT86RF211SDBBIBAND Electrical Schematic
5305C-WIRE-10/04
Bill Material Table AT86RF211SDBBIBAND, (for Use, Note
Description Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 3.3k Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 100k Ceramic capacitor 0603 ±0.25p Ceramic capacitor 0603 ±0.25p Ceramic capacitor 0603 ±0.25p Ceramic capacitor 0603 ±0.5p Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Name R28, R29, R30, R31, R32, R33, R10, Package 0603 0603 0603 0603 0603 0603 0603 Manufacturer
R17, R21, R22, R23, R24, R25, 0603 C22, C27, C28, C29, C41, C17, C10, C18, C20, C12, C19, C16, C11, pts), pts), pts) Lead Through Lead Through MURATA MURATA Atmel
0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
"Tulipe" connector male-male Note: Trimmer capacitor pink (not used final product) Ceramic filter 10.7 SFE10.7xxxx (150 kHz) Transceiver Atmel AT86RF211S
Crystal 10.245 ppm/cal ppm/temp [-10; +60° Cload mounted C39, C40, C42,
HC49/U Specif. XCOT001-1 Lead through
use: mounted TXLVL CTRL1 register order exceed power allowed). value reduced highest bitrate operations. Adapted kbps max.
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
AT86RF211SDBxxxLNA: High Sensitivity/Medium Wide Channels Board with Printed Antenna Inductors
Description piece hardware 868/915 applications (except filter). Adjustable antenna (C43 mounted applications). EIRP must reduced software meet standards (TXLVL CTRL1) frequency hopping implemented (FCC requirement).
Since radiated power vary with environment core, actual value TXLVL should checked during final testing (010 corresponds board mounted development mother board).
Note:
Compliance Standards
ETSI EN300-220 configuration requirement, tested AT86RF211S Part configuration
Figure AT86RF211SDBxxxLNA Board
Available Documentation
"Schematics Board Layout" page "Bill Material" page which includes component manufacturers full part numbers.
Information Notes
part numbers given indicative; they change without notice. Gerber files this design available, please your local Atmel FAE. wired antenna easily mounted increase range.
5305C-WIRE-10/04
Schematics Board Layout
Figure AT86RF211SDBxxxLNA Component Placement
Figure AT86RF211SDBxxxLNA Layout Ground
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Figure AT86RF211SDBxxxLNA Electrical Schematic
5305C-WIRE-10/04
Bill Material Table AT86RF211SDB868LNA (915 Note
Description Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 3.3k Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Resistor 1/10W 0603 Name Package 0603 0603 0603 0603 Manufacturer
R19, R27, R28, R29, R30, R31, R32, 0603 R33, R10, R13, R17, R20, R21, R22, R23, R24, R25, 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
Resistor 1/10W 0603 100k Ceramic capacitor 0603 ±0.25p Ceramic capacitor 0603 ±0.25p Ceramic capacitor 0603 ±0.25p Ceramic capacitor 0603 ±0.5p Ceramic capacitor 0603 ±0.5p Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Ceramic capacitor 0603 Transistor BC856C-857C-858C-859C
C22, C27, C28, C30, C31, C33, C34, 0603 C41, C43(1) C17, C10, C18, C20, C12, C19, C16, C11, pts), pts), pts) Lead through SOT-23 MURATA PHILIPS
0603 0603 0603 0603 0603 0603 0603 0603 0603 SOT-23
"Tulipe" connector male-male Trimmer capacitor 4.5-20 pink (not used final product) Transistor BFR520
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Table AT86RF211SDB868LNA (915 Note (Continued)
Description filter MHz) SAFC869MF70T Name Package Lead Through HC49/U Lead through 2pts Manufacturer MURATA MURATA Atmel Specif. XCOT001-1
Ceramic filter 10.7 SFE10.7xxxx (150 kHz) Transceiver Atmel AT86RF211S Crystal 10.245 ppm/cal ppm/temp [-10; +60° Cload C29, C32, C35, C39, C40, C42,
mounted Note:
use: mounted, filter MHz) SAFC915MA70N (50) TXLVL CTRL1 register order exceed maximum power allowed). value reduced highest bitrate operations. Adapted kbps max.
5305C-WIRE-10/04
AT86RF211SDB433TRI: Standard Tri-band Board with Printed Antenna Inductors
Description piece hardware 433/868/915 applications.
triband board populated factory use. procedure switch described Note page
Note:
Adjustable antenna mounted applications). EIRP must reduced software meet standards frequency hopping implemented (FCC requirement), TXLVL 100.
Since radiated power vary with environment core, actual value TXLVL should checked during final testing (100 corresponds board mounted development mother board).
Note:
Compliance Standards
ETSI EN300-220 configuration. requirements, tested AT86RF211S Kit. Part configuration.
Figure AT86RF211SDB433TRI Board
Available Documentation
"Schematics Board Layout" page "Bill Material" page which includes component manufacturers full part numbers.
Information Notes
part numbers given indicative; they change without notice. Gerber files this design available, please your local Atmel FAE. wired antenna easily mounted increase range. components area delimited blank line related part.
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Schematics Board Layout Figure AT86RF211SDB433TRI Component Placement
Figure AT86RF211SDB433TRI Layout Ground
5305C-WIRE-10/04
Figure AT86RF211SDB433TRI Electrical Schematic
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Bill Material Table AT86RF211SDB433TRI, (for Use, Note Table
Description Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W 3.3K Resistor 1/10W Resistor 1/10W Resistor 1/10W 100K ceram 0.25pF ceram 0.25pF ceram 0.25pF ceram 0.25pF ceram ceram ceram ceram ceram ceram ceram ceram ceram ceram ceram Trim (removed final product) Self 12nH Self 18nH Self 22nH Self 100nH AT86RF211S Name R28, R29, R30, R31, R32, R33, R10, R17, R21, R22, R23, R24, R25, C42(1)
Package 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 0805 0805 0805 TQFP48
Manufacturer
C4(1)
C17, C21(1), C27(1), C28(1), C29(1), C41(1), C13(2) C10, C18, C20, C12, C19, C11,
Murata
ATMEL
5305C-WIRE-10/04
Table AT86RF211SDB433TRI, (for Use, Note Table (Continued)
Ceramic filter 10.7 SFE10.7xxx (150 kHz) 10.245 crystal Cload 50ppm cal., drift [-10; +60° Lead through HC49U lead through Murata
Note:
C2(1), C39, C40, L4(1), R15,
Procedure modify AT86RF211S-DB-433TRI only: only: value reduced highest bitrate operations. Adapted kbps max.
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Table (for Use, Notes)
Description Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W 3.3K Resistor 1/10W Resistor 1/10W Resistor 1/10W 100K ceram 0.25pF ceram 0.25pF ceram 0.25pF ceram 0.25pF ceram +/-0.25pF ceram +/-0.25pF ceram ceram ceram ceram ceram ceram ceram ceram ceram ceram Trim (removed final product) Self 4.7nH Self 10nH Self 12nH Self 100nH AT86RF211S Ceramic filter 10.7 SFE10.7xxx (150 kHz) Name R28, R29, R30, R31, R32, R33, R10, R17, R21, R22, R23, R24, R25, C5(1) C21, C22, C27, C28, C29, C17, C13(3) C10, C18, C20, C12, C19, C11, L4(2) Package 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 0805 0805 0805 TQFP48 Lead through ATMEL Murata Murata Manufacturer
5305C-WIRE-10/04
Table (for Use, Notes) (Continued)
Notes: 10.245 crystal Cload 50ppm cal., +/-15ppm drift [-10; +60°] C39, C40, R15, HC49U lead through
915MHz design, replace resistor 0805 package design, instead value reduced highest bitrate operations. Adapted kbps max.
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
AT86RF211SDBxxx107: High Sensitivity/High Selectivity Board (Narrow Band)
Description single 433, applications: only components corresponding antenna, filter matching, well harmonics filtering specific frequency band. Antenna: antenna mounted each board test purposes. industrial solution simple wire plugged into hole size must adapted frequency: 17.3 version, version version.
Table Measured Radiated Power Modules with Antenna
Frequency Band Measured EIRP Rpower TXLVL Max. EIRP Rpower Recommendations According ETSI300-220, power must clamped software depending gain antenna used. Same remark. According Part radiated output power must clamped -1.25 software fixed frequency system. allowed FHSS system.
General Note
connector antenna provided effective quick measurements, radiated conducted, permitted finished product (according current legislation, removable part tolerated). ETSI EN300-220 configuration requirement, tested AT86RF211S Part configuration
Compliance Standards
Figure AT86RF211SDBxxx107 Board
5305C-WIRE-10/04
Available this Document
"Schematics Board Layout" page "Bill Material" page which includes component manufacturers full part numbers.
Information Notes
part numbers given indicative; they change without notice. Gerber files this design available, please your local Atmel FAE. wired antenna easily mounted increase range, well antenna.
Schematics Board Layout
Figure AT86RF211SDBxxx107 Component Placement
Figure AT86RF211SDBxxx107 Layout Ground
SmartRF AT86RF211
5305C-WIRE-10/04
SAWF1
5.6nF 560pF
RXIN
FILT1
AVCC
EVCC2
VCOIN
RXVCC
RXGND
EGND2
CGND2
CVCC2
AGND
SWOUT
RPOWER
10pF 18nH TXGND3 TXGND4 47pF DISCFILT TXGND2 IF2OUT 2.7pF
SDATA
WAKEUP
DATACLK
TEST2
EVCC1
EGND1
CGND1
CVCC1
XTAL1
XTAL2
5305C-WIRE-10/04
100pF 100pF 4.7nF 4.7nF 100pF 100nF 100nF HEADER 15pF 56nH HEADER IF1OUT TXGND1 IF1IN IF1DEC 1.5nH 27nH 18nH 2.7pF 10.7MHz HEADER 4.7nF 455KHz IF2DEC 2.2NF IF2IN 100pF HEADER HEADER
5.6pF
8.2pF
Figure AT86RF211SDBxxx107 Electrical Schematics
DB433107
TXVCC
TXGND5 100pF DIVGND 100nF DIVCC
IF2GND
IF2VCC
100nF DISCOUT 220pF DSIN
100pF DATAMSG
DATAMSG
SKFILT
10nF 4.7nF 100nF 100pF 82pF 10.245MHz TEST 100nF 100K
TEST2 DATACLK
WAKEUP
SDATA
DATAMSG
10nF 6.5a30pF 15pF 56pF
3.3K
100K
HEADER 100K 100K 100K 100K 100K 100K
WAKEUP SDATA DATACLK
TEST2
SmartRF AT86RF211
100K
100K
Bill Material Frequency Band Table AT86RF211SDB433107
Description Resistor 1/10W Resistor 1/10W 3.3k Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W 100k Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor Ceramic capacitor with RF211) Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Trimmer cap. 6.5-30 (removed final product) Self 1.5nH Self Self Self Self Self Name R18, R10, R11, R12, R14, R15, R16, R19, C39, C42, C18, C29, C30, C31, C32, C52, C17, C24, C26, C20, C15, C14, C19, C57, L10, L14, L15, with RF211) Package 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 MURATA Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Manufacturer
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Table AT86RF211SDB433107 (Continued)
Description AT86RF211S Name Package TQFP48 Manufacturer Atmel MURATA/Shoulder Electronics MURATA
Ceramic filter 10.7 SFECV10.7xxx (180 kHz) LTCV10.7Mxx Ceramic filter CFUXC455Axxx (±17.5 kHz) Crystal 10.245 50ppm/cal ppm/drift [-10; +60° Cload filter MHz) mounted SAWF1 R41, R42, C25, C44, C41, C48, C49, (100 with RF211)
HC49US Temex T606 (50)
5305C-WIRE-10/04
Frequency Band Table AT86RF211SDB868107
Description Resistor 1/10W Resistor 1/10W 3.3k Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W 100k Resistor 1/10W Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor Ceramic capacitor (100 with RF211) Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Trimmer capacitor 6.5-30 (removed final product) Self Self Self Self Self Self Name R18, R10, R11, R12, R14, R15, R16, R19, C42, C18, C29, C30, C31, C32, C52, C17, C24, C26, C20, C15, C14, C19, C57, L10, L14, L15, with RF211) Package 0603 0603 0603 0603 0603 0603 0603 0805 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 MURATA Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Manufacturer
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Table AT86RF211SDB868107 (Continued)
Description AT86RF211S Name Package TQFP48 Manufacturer Atmel MURATA/Shoulder Electronics MURATA
Ceramic filter 10.7 SFECV10.7xxx (180 kHz) LTCV10.7Mxxx Ceramic filter CFUXC455Axxx (±17.5 kHz) Crystal 10.245 50ppm/cal ppm/drift [-10; +60° Cload filter SAFCH869MF70T MHz) mounted
HC49US
SAWF1 R41, R42, C25, C41, C44, C47, C48, C49, with RF211)
MURATA
5305C-WIRE-10/04
Frenquency Band Table AT86RF211SDB915107
Description Resistor 1/10W Resistor 1/10W 3.3k Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W Resistor 1/10W 100k Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor ±0.25p Ceramic capacitor Ceramic capacitor (100 with RF211) Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Ceramic capacitor Trimmer Cap. 6.5-30 (removed final product) Self Self Self Self Self Self Self Name R18, R10, R11, R12, R14, R15, R16, R19, C39, C42, C18, C29, C30, C31, C32, C52, C17, C24, C26, C20, C15, C14, C19, C57, L10, L14, L15, with RF211) Package 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0805 MURATA Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Epcos SIMID06-C Manufacturer
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Table AT86RF211SDB915107 (Continued)
Description AT86RF211S Name Package TQFP48 Manufacturer Atmel MURATA/Shoulder Electronics MURATA
Ceramic filter 10.7 SFECV10.7xxx (180 kHz) LTCV10.7Mxxx Ceramic filter CFUXC455Axxx (±17.5 kHz) Crystal 10.245 ppm/cal ppm/drift [-10,+60° Cload filter SAFCH915MA (50) MHz) mounted
HC49US
SAWF1 R41, R42, C25, C41, C44, C47, C48, (2.2 with RF211)
MURATA
5305C-WIRE-10/04
AT86RF211SDBxxxLT: High Sensitivity/High Selectivity Board (Narrow Band)
Description Same performances AT86RF211SDBxxx107 (see Table page 19), some components lead-through cost reduction purposes. single 433, applications: only components corresponding antenna, filter matching, well harmonics filtering specific frequency band. Antenna: antenna mounted each board test purposes. industrial solution simple wire. size must adapted frequency: 17.3 version, version version.
General Note
connector antenna provided very friendly quick measurements, radiated conducted, allowed finished product (according legislation, removable part tolerated). ETSI EN300-220 configuration requirement, tested AT86RF211S Development Part configuration
Compliance Standards
Figure AT86RF211SDBxxxLT Board
Available this Document
"Schematics Board Layout" page "Bill Material" page which includes component manufacturers full part numbers.
Information Notes
part numbers given indicative; they change without notice. Gerber files this design available, please your local Atmel FAE. wired antenna easily mounted increase range, well antenna.
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Schematics Board Layout Figure AT86RF211SDBxxxLT Component Placement
Figure AT86RF211SDBxxxLT Layout
5305C-WIRE-10/04
FILT1
AVCC
EVCC2
VCOI
EGND2
SWOUT
TXGND2 TRGND3 TRGND4 TXVCC TXGND5 DIGND DIVCC DATMS IF1DEC IF2OUT DISFL IF2DEC IF2IN IF2GND IF2VCC DISOUT DSIN
TXGND1 IF1IN
RXGND
RXVCC
CGND2
CVCC2
AGND
Figure AT86RF211SDBxxxLT Electrical Schematics
SKFILT
SDATA
WAKEUP
DATCLK
EVCC1
EGND1
CGND1
CVCC1
XTAL1
XTAL2
WAKEUP
TEST2
DATACLK
TEST1
SDATA
RPOWE IF1OUT
TEST1 DATACLK TEST2 DATAMSG7 SDATA WAKEUP10
SmartRF AT86RF211
DATAMSG
OSC_TEST
5305C-WIRE-10/04
SmartRF AT86RF211
Bill Material Table AT86RF211SDBxxxLT (xxx 433, MHz)
Value 433/868/915MHz 100k 3.3k 1.5nH 18nH/10nH/8.2nH 18nH/12nH/10nH 33nH/12nH/10nH 47nH/3.3nH/2.2nH 56nH/12nH/15nH pf/2 pf/2.2 pf/10 pf/8.2 pF/27 pF/27 (100 with RF211) pF/NC/NC (100 with RF211) pf/NC/NC pf/2 pf/2.7 pf/NC/NC pf/1.2 pf/2.7 Package 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 Label R6,R7,R8,R9,R10,R11,R 20,R21 R13,R15,R16,R17,R18 R3,R5 R12,R14 C11,C21,C22,C28,C34, C8,C9,C13,C16,C20, C26,C35 C29,C37 C17,C32 C10,C14,C23,C25 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 433/868/915 Manufacturer
5305C-WIRE-10/04
Table AT86RF211SDBxxxLT (xxx 433, MHz) (Continued)
6.5-30 pf/NC/3.3 filter TQS821A7R SAFC869MF70T TQS758A7R 10.7 filter (150 kHz) filter (CFT455B, kHz) 10.245 AT86RF211S 0603 0603 0603 0603 0603 0603 0603 C12,C15,C24,C36 433: Toyocom (150 868: Murata MHz: Toyocom AIER Electronics AIER Electronics Cload=16 cal=50 ppm, +/-10 over [10.60°C] ATMEL 433/868/915
Lead Through Lead Through Lead Through TQFP48
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Multi-sourcing
AT86RF211S fully integrated component that does require external critical component. consequence, possible several different sources them. Procurement filters crystals from very low-cost sources done through European distributors. They provide full support (technical, sales samples). Please contact SmartRF@gfo.atmel.com.
Inductors
Murata LQN21A series: 0805 surface mount package Murata LQP18MN series: 0603 surface mount package Murata LQW1005A series: 0402 surface mount package Susumu TFL0816 series: 0603 surface mount package Coilcraft 0805CS series: 0805 surface mount package Coilcraft 0603CS series: 0603 surface mount package WE-MK: 0603 surface mount package MaxEcho series: 0603 surface mount package Temex Golledge Raltron Quartzcom Siward Frank Schulte Etc. drift, calibration, ageing: please refer Note "Understanding Demodulation Data Slicing Features Implementing Demodulation Capability". ESR: sure crystal whose Drive Level Load capacitance: give value given BOM. another value chosen, will have re-calculate values external capacitors (refer datasheet examples).
Crystals
crystal manufacturer will following information:
10.7 Filters
Cheap ceramic filters (from more than kHz) purchased from: Shoulder Electronics AIER Toko Panasonic Token Siward Crystal filters manufacturers general
Narrow filters (typ kHz) also possible:
5305C-WIRE-10/04
Filters
filters available from ±17.5 bandwidth. data rate limited kbits/s accordingly.
Note: This filter removed many applications (replaced capacitor), made with discrete elements (pleaser refer datasheet).
Shoulder Electronics AIER Toko Soshin Tokem
Filters
Filters Toyocom TQS-821-A7R
This filter, which matching
SWOUT (pin RXIN (pin
also possible filter: Murata SAFCH434MA Temex TMX-T606 (3.8 Temex T612 Epcos B3580 Sawcom C21627
these filters, best matching
SWOUT (pin RXIN (pin
Filters
Temex S142 Murata SAFCH869MA (50) Epcos B3568 (50) Temex S110
SmartRF AT86RF211
5305C-WIRE-10/04
SmartRF AT86RF211
Filters Murata SAFCH915MA (50) Epcos B3588 (50)
Important note: always possible filter with another impedance, this necessitates changing matching network. Please refer datasheet find relevant impedances.
5305C-WIRE-10/04
Atmel Corporation
2325 Orchard Parkway Jose, 95131, Tel: 1(408) 441-0311 Fax: 1(408) 487-2600
Atmel Operations
Memory
2325 Orchard Parkway Jose, 95131, Tel: 1(408) 441-0311 Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse Postfach 3535 74025 Heilbronn, Germany Tel: (49) 71-31-67-0 Fax: (49) 71-31-67-2340 1150 East Cheyenne Mtn. Blvd. Colorado Springs, 80906, Tel: 1(719) 576-3300 Fax: 1(719) 540-1759
Regional Headquarters
Europe
Atmel Sarl Route Arsenaux Case Postale CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500
Microcontrollers
2325 Orchard Parkway Jose, 95131, Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 Chantrerie 70602 44306 Nantes Cedex France Tel: (33) 2-40-18-18-18 Fax: (33) 2-40-18-19-60
Biometrics/Imaging/Hi-Rel MPU/ High Speed Converters/RF Datacom
Avenue Rochepleine 38521 Saint-Egreve Cedex, France Tel: (33) 4-76-58-30-00 Fax: (33) 4-76-58-34-80
Asia
Room 1219 Chinachem Golden Plaza Mody Road Tsimshatsui East Kowloon Hong Kong Tel: (852) 2721-9778 Fax: (852) 2722-1369
ASIC/ASSP/Smart Cards
Zone Industrielle 13106 Rousset Cedex, France Tel: (33) 4-42-53-60-00 Fax: (33) 4-42-53-60-01 1150 East Cheyenne Mtn. Blvd. Colorado Springs, 80906, Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743
Japan
Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581
Literature Requests
www.atmel.com/literature
Disclaimer: information this document provided connection with Atmel products. license, express implied, estoppel otherwise, intellectual property right granted this document connection with sale Atmel products. EXCEPT FORTH ATMEL'S TERMS CONDITIONS SALE LOCATED ATMEL'S SITE, ATMEL ASSUMES LIABILITY WHATSOEVER DISCLAIMS EXPRESS, IMPLIED STATUTORY WARRANTY RELATING PRODUCTS INCLUDING, LIMITED IMPLIED WARRANTY MERCHANTABILITY, FITNESS PARTICULAR PURPOSE, NON-INFRINGEMENT. EVENT SHALL ATMEL LIABLE DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES LOSS PROFITS, BUSINESS INTERRUPTION, LOSS INFORMATION) ARISING INABILITY THIS DOCUMENT, EVEN ATMEL BEEN ADVISED POSSIBILITY SUCH DAMAGES. Atmel makes representations warranties with respect accuracy completeness contents this document reserves right make changes specifications product descriptions time without notice. Atmel does make commitment update information contained herein. Atmel's products intended, authorized, warranted components applications intended support sustain life.
Atmel Corporation 2004. rights reserved. Atmel logo combinations thereof, registered trademarks, Everywhere trademark Atmel Corporation subsidiaries. Other terms product names trademarks others.
Printed recycled paper.
5305C-WIRE-10/04
Other recent searches
TMG16D60 - TMG16D60 TMG16D60 Datasheet
RFBPB2520120A1T - RFBPB2520120A1T RFBPB2520120A1T Datasheet
MC33347A - MC33347A MC33347A Datasheet
EB72F61 - EB72F61 EB72F61 Datasheet
CD4068B - CD4068B CD4068B Datasheet
B10A60VIC - B10A60VIC B10A60VIC Datasheet
2SK2867 - 2SK2867 2SK2867 Datasheet
1N4728A-G - 1N4728A-G 1N4728A-G Datasheet
1N4764A-G - 1N4764A-G 1N4764A-G Datasheet
Privacy Policy | Disclaimer
© 2012 Datasheet Archive
